Precursor engineering enables high-performance all-inorganic CsPbIBr_(2) perovskite solar cells with a record efficiency approaching 13%

All-inorganic CsPbIBr_(2) perovskite has attracted widespread attention in photovoltaic and other optoelectronic devices because of its superior thermal stability.However,the deposition of high-quality solutionprocessed CsPbIBr_(2) perovskite films with large thicknesses remains challenging.Here,we develop a triple-component precursor(TCP) by employing lead bromide,lead iodide,and cesium bromide,to replace the most commonly used double-component precursor(DCP) consisting of lead bromide and cesium iodide.Remarkably,the TCP system significantly increases the solution concentration to 1.3 M,leading to a larger film thickness(~390 nm) and enhanced light absorption.The resultant CsPbIBr_(2) films were evaluated in planar n-i-p structured solar cells,which exhibit a considerably higher optimal photocurrent density of 11.50 mA cm^(-2) in comparison to that of DCP-based devices(10.69 mA cm^(-2)).By adopting an organic surface passivator,the maximum device efficiency using TCP is further boosted to a record efficiency of 12.8% for CsPbIBr_(2) perovskite solar cells.

Enhancing performance of low-temperature processed CsPbI2Br all-inorganic perovskite solar cells using polyethylene oxide-modified TiO_(2)

CsPbX_(3)-based(X=I,Br,Cl)inorganic perovskite solar cells(PSCs)prepared by low-temperature process have attracted much attention because of their low cost and excellent thermal stability.However,the high trap state density and serious charge recombination between low-temperature processed TiO_(2)film and inorganic perovskite layer interface seriously restrict the performance of all-inorganic PSCs.Here a thin polyethylene oxide(PEO)layer is employed to modify TiO_(2)film to passivate traps and promote carrier collection.The impacts of PEO layer on microstructure and photoelectric characteristics of TiO_(2)film and related devices are systematically studied.Characterization results suggest that PEO modification can reduce the surface roughness of TiO_(2)film,decrease its average surface potential,and passivate trap states.At optimal conditions,the champion efficiency of CsPbI_(2)Br PSCs with PEO-modified TiO_(2)(PEO-PSCs)has been improved to 11.24%from 9.03%of reference PSCs.Moreover,the hysteresis behavior and charge recombination have been suppressed in PEO-PSCs.

High-performance magnesium/sodium hybrid ion battery based on sodium vanadate oxide for reversible storage of Na^(+)and Mg^(2+)

Magnesium ion batteries(MIBs)are a potential field for the energy storage of the future but are restricted by insufficient rate capability and rapid capacity degradation.Magnesium-sodium hybrid ion batteries(MSHBs)are an effective way to address these problems.Here,we report a new type of MSHBs that use layered sodium vanadate((Na,Mn)V_(8)O_(20)·5H_(2)O,Mn-NVO)cathodes coupled with an organic 3,4,9,10-perylenetetracarboxylic diimide(PTCDI)anode in Mg^(2+)/Na^(+)hybrid electrolytes.During electrochemical cycling,Mg^(2+)and Na^(+)co-participate in the cathode reactions,and the introduction of Na^(+)promotes the structural stability of the Mn-NVO cathode,as cleared by several ex-situ characterizations.Consequently,the Mn-NVO cathode presents great specific capacity(249.9 mA h g^(−1)at 300 mA g^(−1))and cycling(1500 cycles at 1500 mA g^(−1))in the Mg^(2+)/Na^(+)hybrid electrolytes.Besides,full battery displays long lifespan with 10,000 cycles at 1000 mA g^(−1).The rate performance and cycling stability of MSHBs have been improved by an economical and scalable method,and the mechanism for these improvements is discussed.

From EBIT to SEBIT(Sustainable EBIT):Sustainable Performance Accounting(SPA)Using the Example of CO_(2) Accounting

Corporate sustainability reporting has become increasingly important in recent years.However,conventional approaches reach their limits when it comes to quantifying and measuring the actual sustainability performance of a company.This article presents a new approach:Sustainable Performance Accounting(SPA),which is based on an extension of bookkeeping by including ESG bookkeeping.SPA enables companies to systematically measure and manage their sustainability performance.The article provides an overview of the basics of SPA methodology and uses a comprehensive example showing how SPA can be implemented in practice.The article is aimed at interested readers from science and practice as well as decision-makers who are interested in future-oriented sustainability reporting.

Effect of ultrasonic on structure and electrochemical performance of α-Ni(OH)_2 electrodes

Al/Co co-doped α-Ni（OH）2 samples were prepared by either ultrasonic co-precipitation method （Sample B） or co-precipitation method （Sample A）. The crystal structure and particle size distribution of the prepared samples were examined by X-ray diffraction （XRD） and laser particle size analyzer, respectively. The results show that Sample B has more crystalline defects and smaller average diameter than Sample A. The cyclic voltammetry and electrochemical impedance spectroscopy measurements indicate that Sample B has better electrochemical performance than Sample A, such as better reaction reversibility, lower charge-transfer resistance and better cyclic stability. Proton diffusion coefficient of Sample B is 1.96×10-10cm2/s, which is two times as large as that （9.78×10-11cm2/s） of Sample A. The charge-discharge tests show that the discharge capacity （308 mA·h/g） of Sample B is 25 mA·h/g higher than that of Sample A （283 mA·h/g）.

Impact of Illumination and Temperature Performance of Blanket-Inside Solar Greenhouse and CO_2 Enrichment on Cucumber Growth and Development

To evaluate the effects of solar greenhouse with different structure and CO2 enrichment on illumination and temperature performance of greenhouse and cucumber growth and development in the central region of Inner Mongolia, the research used traditional solar greenhouse （A） and blanket-inside solar greenhouse（B）, and set 4 treatments： AE （traditional solar greenhouse A with CO2 enrichment）, AN （traditional solar greenhouse A without CO2 enrichment）, BE （blanket-inside solar greenhouse B with CO2 enrichment） and BN （blanket-inside solar greenhouse B without CO2 enrichment）, to explore the influence of cucumber growth, photosynthetic property, quality and yield in different structure solar greenhouses with CO2 enrichment. The results showed that the illumination and temperature in blanket-inside solar greenhouse was superior to traditional solar greenhouse, and the average light intensity in blanket-inside solar greenhouse increased by 21.05%, compared with traditional solar greenhouse. Under the condition of same greenhouse structure, stem height ,average stem diameter, contents of soluble sugar, vitamin C, net photosynthetic rate and yield showed any significant difference between the treatments with CO2 enrichment or not. Under the condition of same CO2 concentration, BE cucumber average stem height, average stem diameter, contents of soluble sugar, net photosynthetic rate and yield in BE was higher than which in AE. Therefore, the optimization in structure of blanket-inside solar greenhouse remarkably improved illumination and temperature property, combining with CO2 enrichment as application technology, there was crucial significance to promote the greenhouse performance and improve the efficiency of greenhouse vegetable production.

Parameters Optimization and Performance Evaluation of the Tuned Inerter Damper for the Seismic Protection of Adjacent Building Structures

In order to improve the seismic performance of adjacent buildings,two types of tuned inerter damper(TID)damping systems for adjacent buildings are proposed,which are composed of springs,inerter devices and dampers in serial or in parallel.The dynamic equations of TID adjacent building damping systems were derived,and the H2 norm criterion was used to optimize and adjust them,so that the system had the optimum damping performance under white noise random excitation.Taking TID frequency ratio and damping ratio as optimization parameters,the optimum analytical solutions of the displacement frequency response of the undamped structure under white noise excitation were obtained.The results showed that compared with the classic TMD,TID could obtain a better damping effect in the adjacent buildings.Comparing the TIDs composed of serial or parallel,it was found that the parallel TIDs had more significant advantages in controlling the peak displacement frequency response,while the H2 norm of the displacement frequency response of the damping system under the coupling of serial TID was smaller.Taking the adjacent building composed of two ten-story frame structures as an example,the displacement and energy collection time history analysis of the adjacent building coupled with the optimum design parameter TIDs were carried out.It was found that TID had a better damping effect in the full-time range compared with the classic TMD.This paper also studied the potential power of TID in adjacent buildings,which can be converted into available power resources during earthquakes.

Tracking Performance of Electric Power Steering System Based on the Mixed H_2/H_∞ Strategy

The tracking performance of motor current is an important factor that affects the assistance torque of electric power steering （EPS） system. Bad tracking performance will cause assistant torque delay, and make road feeling bad, and is influenced by the input steering torque and system measuring noise. However the existing methods have some shortages on system＇s robust dynamic performance and robust stability. The mixed H2/H∞ strategy for recirculating ball-type EPS system in a pure electric bus is proposed, and vehicle dynamic model of the system is established. Due to the existence of system model uncertainty, disturbance signals, sensor noises and the demand of system dynamic performance, the indexes of robust performance and road feeling for drivers are defined as the appraisal control objectives. The H∞ method is introduced to design the H∞ controller, and the H2 method is applied to optimize the H∞ controller, thus the mixed H2/H∞ controller is designed. The response of EPS system to the motor current command with amplitude of 20 A, the road disturbance with amplitude of 500 N and the sensor random noise with the amplitude of 1 A is simulated. The simulation results show that the recirculating ball-type EPS system with the mixed H2/H∞ controller can attenuate the random noises and disturbances and track the boost curve well, so the mixed H2/H∞ controller can improve the system＇s robust performance and dynamic performance. For the purpose of verifying the performance of the designed control strategy, the motor current tracking performance ground tests are conducted with step response input of the steering wheel, double-lane steering test and lemniscate steering test, respectively. The tests show that the mixed H2/H∞ controller for the recirculating ball-type EPS system of pure electric bus is feasible. The designed controller can solve the robust performance and robust stability of the system, thus improve the tracking performance of the EPS system and provide satisfied road feeling for the drivers.

Synthesis and electrochemical performances of LiCoO_2 recycled from the incisors bound of Li-ion batteries

A new LiCoO2 recovery technology for Li-ion batteries was studied in this paper. LiCoO2 was peeled from the Al foil with dimethyl acetamide （DMAC）, and then polyvinylidene fluoride （PVDF） and carbon powders in the active material were eliminated by high temperature calcining. Subsequently, Li2CO3, LiOH-H20 and LiAc-2H2O were added into the recycled powders to adjust the Li/Co molar ratio to 1.00. The new LiCoO2 was obtained by calcining the mixture at 850℃ for 12 h in air. The structure and morphology of the recycled powders and resulting samples were studied by XRD and SEM techniques, respectively. The layered structure of LiCoO2 synthesized by adding Li2CO3 is the best, and it is found to have the best characteristics as a cathode material in terms of charge-discharge capacity and cycling performance. The first discharge capacity is 160 mAh·g^-1 between 3.0-4.3 V. The discharge capacity after cycling for 50 times is still 145.2 mAh·g^-1.

Performance and capacity fading reason of LiMn_2O_4/graphite batteries after storing at high temperature

Spinel LiMn204 was synthesized by a solid-state method. A 204468-size battery was fabricated and stored at 55℃. The structure and morphology of the LiMn204 cathode were analyzed by X-ray diffraction （XRD） and scanning electron microscopy （SEM） technique. Energy dispersive spectroscopy （EDS） was used to analyze the surface component of the carbon anode. The discharge capacities of LiMn204 stored for 0, 24, 48, and 96 h are 106, 98, 96, and 92 mAh·g^-1, respectively. The cyclic performance is improved after storage. The capacity retentions of LiMn204 stored for 0, 24, 48, and 96 h are 83.8%, 85.8%, 86.9%, and 88.6% after 180 cycles. The intensity of all the LiMn204 diffraction peaks is weakened. Mn is detected from the carbon electrode when the battery is stored for 96 h. Cyclic voltammograms and electrochemical impedance spectroscopy （EIS） were used to examine the surface state of the electrode after storage. The results show that the resistance and polarization of LiMn2O4/electrolyte is increased after storage, which is responsible for the fading of capacity.

Hydrothermal Synthesis of H_3PW_(12)O_(40)/TiO_2 Nanometer Photocatalyst and Its Catalytic Performance for Methyl Orange

H3PW12O40/TiO2 nanometer photocatalyst was prepared by one step hydrothermal synthesis from H3PW12O40·nH20 and Ti（OBu）4, simultaneously realizing the load and modification of H3PW12O40. The catalyst was characterized by Fourier transform infrared spectroscopy（FTIR）, powder X-ray diffraction（XRD）, nitrogen adsorp- tion-desorption analysis and scanning electron microscopy（SEM）. The results show that the catalyst is Keggin struc- ture and crystallized in anatase structure, the diameter and specific area of the prepared catalyst are 3.8 nm and 177.9 m^2/g, respectively, and its dispersity is better. The photocatalytic properties were compared for TiO2H3PW12O40/TiO2 prepared by impregnation and H3PW12O40/TiO2 prepared by hydrothermal method with methyl orange as a probe. The effects of H3PW12O40 loadings, crystallization method, initial pH and concentration of dye solution on the degradation of methyl orange were investigated.

Enhancing Capacitance Performance of Ti3C2Tx MXene as Electrode Materials of Supercapacitor: From Controlled Preparation to Composite Structure Construction

Ti3C2Tx,a novel two-dimensional layer material,is widely used as electrode materials of supercapacitor due to its good metal conductivity,redox reaction active surface,and so on.However,there are many challenges to be addressed which impede Ti3C2Tx obtaining the ideal specific capacitance,such as restacking,re-crushing,and oxidation of titanium.Recently,many advances have been proposed to enhance capacitance performance of Ti3C2Tx.In this review,recent strategies for improving specific capacitance are summarized and compared,for example,film formation,surface modification,and composite method.Furthermore,in order to comprehend the mechanism of those efforts,this review analyzes the energy storage performance in different electrolytes and influencing factors.This review is expected to predict redouble research direction of Ti3C2Tx materials in supercapacitors.

Effect of H_2S Flow Rate and Concentration on Performance of H_2S/Air Solid Oxide Fuel Cell

A solid state H2S/air electrochemical cell having the configuration of H2S, (MoS2+NiS+Ag)/YSZ/Pt, air has been examined with different H2S flow rates and concentrations at atmospheric pressure and 750-850 ℃. Performance of the fuel cell was dependent on anode compartment H2S flow rate and concentration. The cell open-circuit voltage increased with increasing H2S flow rate. It was found that increasing both H2S flow rate and H2S concentration improved current-voltage and power density performance. This is resulted from improved gas diffusion in anode and increased concentration of anodic electroactive species. Operation at elevated H2S concentration improved the cell performance at a given gas flow rate. However, as low as 5% H2S in gas mixture can also be utilized as fuel feed to cells. Highest current and power densities, 17500mA·cm-2 and 200mW·cm-2, are obtained with pure H2S flow rate of 50ml·min-1 and air flow rate of 100ml·min-1 at 850℃.

High Temperature Performances of Spherical Nickel Hydroxide with Additive Y_2O_3

The effect Of Y2O3 as additive to the positive electrode on the high-temperature performances of the Ni-MH batteries was studied. The specific capacities of the positive electrode in Ni-MH battery at higher temperatures are much lower than usual. In order to improve high-temperature performances, charge/discharge curves of the Ni(OH)(2) electrodes with different amounts Of Y2O3 it different temperatures were studied. It is found that the specific capacities of the spherical Ni (OH)(2) with Y2O3 as additive are much higher than those of the regular at higher temperatures. The specific capacity of Ni (OH)(2) containing 1% Y2O3 at 0.2C C/D rate is 35% higher than that of the regular. The specific capacity of Ni (OH)(2) containing 0.2% Y2O3 at 1C C/D rate is 15% higher than that of the regular. Mechanism Of Y2O3 improving high temperature performances of Ni(OH)(2) electrode was also discussed in detail.

A review of β-Ga_2O_3 single crystal defects, their effects on device performance and their formation mechanism

As a wide-bandgap semiconductor(WBG), β-Ga_2O_3 is expected to be applied to power electronics and solar blind UV photodetectors. In this review, defects in β-Ga_2O_3 single crystals were summarized, including dislocations, voids, twin, and small defects. Their effects on device performance were discussed. Dislocations and their surrounding regions can act as paths for the leakage current of SBD in single crystals. However, not all voids lead to leakage current. There's no strong evidence yet to show small defects affect the electrical properties. Doping impurity was definitely irrelated to the leakage current. Finally, the formation mechanism of the defects was analyzed. Most small defects were induced by mechanical damages. The screw dislocation originated from a subgrain boundary. The edge dislocation lying on a plane slightly tilted towards the(102) plane, the(101) being the possible slip plane. The voids defects like hollow nanopipes, PNPs, NSGs and line-shaped grooves may be caused by the condensation of excess oxygen vacancies, penetration of tiny bubbles or local meltback. The nucleation of twin lamellae occurred at the initial stage of "shoulder part" during the crystal growth. These results are helpful in controlling the occurrence of crystal defects and improving the device performance.

A phase inversion based sponge-like polysulfonamide/SiO_2 composite separator for high performance lithium-ion batteries

In this work,a sponge-like polysulfonamide(PSA)/SiO_2 composite membrane is unprecedentedly prepared by the phase inversion method,and successfully demonstrated as a novel separator of lithium-ion batteries(LIBs).Compared to the commercial polypropylene(PP) separator,the sponge-like PSA/SiO_2 composite possesses better physical and electrochemical properties,such as higher porosity,ionic conductivity,thermal stability and flame retarding ability.The LiCoO_2/Li half-cells using the sponge-like composite separator demonstrate superior rate capability and cyclability over those using the commercial PP separator.Moreover,the sponge-like composite separator can ensure the normal operation of LiCoO_2/Li half-cell at an extremely high temperature of 90 °C,while the commercial PP separator cannot.All these encouraging results suggest that this phase inversion based sponge-like PSA/SiO_2 composite separator is really a promising separator for high performance LIBs.

Synthesis of a novel hexagonal porous TT-Nb2O5 via solid state reaction for high-performance lithium ion battery anodes

Hexagonal porous Nb2O5 was synthesized for the first time via a facile solid-state reaction.The structure and electrochemical properties have been optimized through tuning heating temperature.X-ray diffraction results indicate that pseudo hexagonal Nb2O5(TT-Nb2O5)and orthorhombic Nb2O5 have been synthesized at different temperatures.Hexagonal sheet and porous structure of Nb2O5 were characterized by scanning electron microscopy and N2-adsorption-desorption isotherms.The as-prepared TT-Nb2O5(heated at 600℃)shows the best performance with a remarkable charge capacity of 178 mA∙h/g at 0.2C,which is higher than that of T-Nb2O5.Even at 20℃,TT-Nb2O5 offers unprecedented rate capability up to 86 mA∙h/g.The high rate capacity is due to pseudocapacitive Li+intercalation mechanism of TT-Nb2O5.The reported results demonstrate that Nb2O5 with good crystal structure and high specific surface area is a powerful composite design for high-rate and safe anode materials.

Electrochemical lithium storage performance of three-dimensional foam-like biocarbon/MoS2 composites

Molybdenum disulfide(MoS2)was loaded on biocarbon using waste camellia dregs(CDs)as the carbon source,which was further coated with dopamine hydrochloride to construct biocarbon/MoS2 electrode composites.The electrochemical lithium storage performance of the composites with different MoS2 contents was investigated.SEM results demonstrated that the composite had a three-dimensional foam-like structure with MoS2 as the interlayer.XRD and HRTEM tests revealed that MoS2 interlayer spacing in the composite was expanded.XPS analysis showed that new Mo—N bonds were formed in the active material.The electrochemical tests showed that the composite with a MoS2 content of 63%had a high initial specific capacity of 1434 mA·h/g at a current density of 100 mA/g.After a long cycle at a high current,it also showed good cycling stability and the capacity retention was nearly 100%.In addition,it had good lithium ion deintercalation ability in the electrochemical kinetics test.

Electrochemical performances of as-cast and annealed La_(0.8-x)Nd_xMg_(0.2)Ni_(3.35)Al_(0.1)Si_0.05(x=0-0.4) alloys applied to Ni/metal hydride (MH) battery

The La-Mg-Ni-based A2B7-type Lao.8_xNdx Mgo.2Ni3.35Alo.lSio.o5 （x = 0, 0.1, 0.2, 0.3, and 0.4） electrode alloys were prepared by casting and annealing. The influence of the partial substitution of Nd for La on the structure and electrochemical performances of the alloys was investigated. The structural analysis of X-ray diffraction and scanning electron microscopy reveals that the experimental alloys consist of two major phases： （La,Mg）2Ni7 with the hexagonal Ce2Ni7-type structure and LaNi5 with the hexagonal CaCus-type structure as well as some residual phases of LaNi3 and NdNis. The electrochemical measurements indicate that an evident change of the electrochemical performance of the alloys is associated with the substitution of Nd for La. The discharge capacity of the alloy first increases then decreases with the growing Nd content, whereas their cycle stability clearly grows all the time. Furthermore, the measurements of the high rate discharge ability, the limiting current density, and hydrogen diffusion coefficient all demonstrate that the electrochemical kinetic properties of the alloy electrodes first augment then decline with the rising amount of Nd substitution.

2-Ethyl-9,10-anthraquinone assisted sol–gel synthesis of Pd/γ-Al2O3 nanorods with enhanced catalytic performance in 2-ethyl-9,10-anthraquinone hydrogenation

A series of nanorod-like porous Pd/γ-Al2 O3 catalysts with controllable textural properties and enhanced catalytic performance in 2-ethyl-9,10-anthraquinone(eAQ) hydrogenation for H2 O2 preparation were successfully prepared via a facile sol-gel method using aluminum isopropoxide as aluminum precursor and eAQ as structure directing agent,sequential calcination and impregnation process with Na2 PdCl4 solution.The physicochemical properties of the catalysts obtained with different addition amounts of eAQ.were comparatively characterized by XRD,TG-DSC,BET,TEM,CO-TPR,H2-TPR and H2-O2 titration.The results show that addition of eAQ can not only effectively control the textural properties(surface area,pore volume and average pore size) of the catalysts,but also lower their reduction temperature of active metal.Importantly,the catalyst obtained with an addition amount of 4 wt% eAQ shows the highest hydrogenation efficiency of 10.28 g·L^-1,which is 37.3% higher than 7.49 g·L^-1 of the catalyst obtained without eAQ.