Application of sensory and motor training in AIDET communication mode in patients after knee arthroplasty

BACKGROUND Patients with knee arthroplasty often have problems such as slow recovery of knee function,which may cause negative emotions and affect their postoperative rehabilitation.The application of sensory and motor training in the Acknowledge,Introduce,Duration,Evaluation,Thank You(AIDET)communication mode in patients after knee arthroplasty can provide reference for the selection of postoperative rehabilitation training measures.AIM To explore the sensory and motor training effects in AIDET communication mode on knee function recovery and resilience of patients after knee arthroplasty.METHODS One hundred patients who underwent knee arthroplasty at our hospital between January 2022 and January 2024 were randomly divided into two groups.The control group(n=50)received routine rehabilitation training.In the observation group(n=50),the AIDET communication mode was used to perform sensory and motor training,in addition to routine rehabilitation training.The rehabilitation training was administered for 8 weeks.After surgery,knee function,balance ability,walking ability,proprioception,and resilience were compared between the two groups.RESULTS The New York Hospital for Special Surgery knee scores of the observation group at the time of discharge and 8 weeks after intervention were(65.23±6.84,84.53±5.27),which was higher than those of the control group(61.03±7.15,74.92±6.52)(P<0.05).The balance ability of the observation group at the time of discharge and 8 weeks after the intervention was higher than that of the control group,the time of time up to go test was shorter than that of the control group,and proprioceptive function was higher than that of the control group(P<0.05).The resilience level in the observation group after the intervention was higher than that in the control group(P<0.05).CONCLUSION Sensory and motor training in AIDET communication mode promotes knee function recovery of patients after knee arthroplasty,improves their limb walking ability and balance function,and increases their resilience level.

Innovation and Practice of Training Mode for Professional Postgraduates of Acupuncture and Tuina Based on Artificial Intelligence

In view of the common problems of integrating artificial intelligence into the training of postgraduates in Acupuncture and Tuina major,this paper reviews the related research progress both at home and abroad.It puts forward the innovative reform paths for integrating artificial intelligence into postgraduate training mode of Acupuncture and Tuina major:construct the teaching staff of artificial intelligence graduate students;innovating artificial intelligence to promote the integration of classics and scientific research;constructing the ideological and political case base of artificial intelligence courses;implementing artificial intelligence platform blended teaching;building a domestic and foreign exchange platform for artificial intelligence.Through practical research in teaching,it has achieved good teaching results and played a good demonstration,leading and radiation role in similar majors in China.

The Influencing Factors and Improvement Paths of Applied Talent Training Mode under the Digital Informatization

This study takes the human resource management major of Guangzhou Institute of Science and Technology as an example to discuss the factors influencing the applied talent training mode and improvement paths under digital informatization.The research points out that digital informatization poses new challenges and opportunities to higher education and requires the applied talent training mode to practice and innovate.This study identified five key influencing factors of the applied talent training mode under digital informatization:curriculum setting,teaching methods,faculty structure,practical teaching,and student training.This research presents the improvement paths,including optimizing curriculum settings,innovating teaching methods,adjusting teacher structure,improving practical teaching,and creating student training.Implementing these paths will help students master the latest knowledge and skills of digital informatization,improve their practical ability and innovative thinking to meet the social demand for human resource management professionals,and promote the development of higher education system.

Research on the Dual Carbon Talent Training Model for the Construction Engineering Technology Major in Higher Vocational Education

Against the backdrop of global climate change and China’s“dual carbon”goals,the green transformation of the construction industry is imperative,and completing the transformation requires many dual carbon talents to support it.This article focuses on the construction engineering technology major in higher vocational education.It explores in depth the specific requirements for construction engineering technology talents in terms of professional knowledge,vocational skills,and literacy under the dual carbon mode.Based on this,corresponding dual carbon talent training courses are proposed,aiming to provide theoretical support and practical guidance for cultivating high-quality dual carbon talents that meet the needs of the new era.

Discussion on Talent Training Mode of Engineering Cost Major in Higher Vocational Colleges

With the rapid development of higher vocational education,the number of schools and enrollment has increased rapidly,and each specialty has been continuously refined.This has led to new challenges in the talent training of new specialties in higher vocational colleges in recent years.Based on the post ability standard of cost staff and the skill requirements of related posts,according to the characteristics of this major and guided by the idea of systematization of the work process,this paper discusses the problems existing in the talent training mode of higher vocational engineering cost major and provides some suggestions for the talent training and construction of higher vocational engineering cost major.It aims to promote continuous teaching reform in the future and the development of engineering cost majors in higher vocational colleges.

Research on Innovation of Modern Apprenticeship Talent Training Model for Art and Design Majors in Higher Vocational Education under the Background of "Double High"

In order to cultivate more excellent talents in art and design majors following the requirements of the"13th Five-Year Plan"national education development,this paper analyzes in-depth on the current status of higher vocational education in art design profession under the background of the"Double High"plan and the challenges faced,and proposes the building of school-enterprise"Double Subject"education system and the establishment of a"diversified"evaluation system.Deepening the integration of industry and education,schools and enterprises jointly explore modern apprenticeship talent training models for innovative art and design majors,and provide a strong guarantee for the implementation of the"Double High"plan modern apprenticeship talent training model.

基于Double DQN的双模式多目标信号配时方法

近年来深度强化学习作为一种高效可靠的机器学习方法被广泛应用在交通信号控制领域。目前,现有交通信号配时方法通常忽略了特殊车辆(例如救护车、消防车等)的优先通行;此外,基于传统深度强化学习的信号配时方法优化目标较为单一,导致其在复杂交通场景中性能不佳。针对上述问题,基于Double DQN提出一种融合特殊车辆优先通行的双模式多目标信号配时方法(Dual-mode Multi-objective signal timing method based on Double DQN,DMDD),以提高不同交通场景下路口的通行效率。该方法首先基于路口的饱和状态选择信号控制模式,特殊车辆在紧急控制模式下被赋予更高的通行权重,有利于其更快通过路口;接着针对等待时长、队列长度和CO 2排放量3个指标分别设计神经网络进行奖励计算;最后利用Double DQN进行最优信号相位的选择,通过灵活切换信号相位以提升通行效率。基于SUMO的实验结果表明,DMDD与对比方法相比能有效缩短路口处特殊车辆的等待时长、队列长度和CO 2排放量,特殊车辆能够更快通过路口,有效地提高了通行效率。

Build an International Teaching Resource Construction System and Practice International Talent Training in the Context of “Double First-class” ——Take the School of Software of Northwestern Polytechnical University Case as an Example

From the perspective of the development of world-class universities,internationalization is an essential strategic choice and external feature,and also an inevitable choice to improve the discourse power and competitiveness of international higher education.In line with the national“double first-class”international development strategy of higher education,based on the cultivation of students’overall quality,the improvement of teachers’professional ability,and the development of school’s improvement of quality and efficiency,we School of Software,Northwestern Polytechnical University,explore new ideas and new measures for the cultivation of international software engineering talents,build a set of international teaching resources construction system,to form a reference standard and scheme for the cultivation of international software engineering talents.At present,we have achieved excellent results.

The Optimizing Model and Its Solution for Making Train Working Graph with Computer on Separative Division of Double－Track Lines

The authoros specialize in the field of optunization and automatic programme oftrain working graph. In this peper, at frist, a mixed 0-1 integer progranimingmodel about this problem for duuble-track lines is set up, then the principle andProcess of selution are stated, with an application exaiiiple put forward.

On the Training Modes of Interdisciplinary and Application-oriented Talents of Business English

This paper focuses on the training modes of interdisciplinary and application-oriented talents of business English and the constructions of curriculum. In the light of our socialist market-oriented economy characteristics, the discussion proceeds, in theory and practice, by putting forward a relatively profound approach according to the trend in the demands for business English talents and to the operational patterns of business English discipline, with some suggestions about the training modes of interdisciplinary and application-oriented talents and the construction of curriculum.

Numerical simulation and control of welding distortion for double floor structure of high speed train

The welding heat source models and the plastic tension zone sizes of a typical weld joint involved in the double floor structure of high speed train under different welding parameters were calculated by a thermal-elastic-plastic FEM analysis based on SYSWELD code.Then,the welding distortion of floor structure was predicted using a linear elastic FEM and shrinkage method based on Weld Planner software.The effects of welding sequence,clamping configuration and reverse deformation on welding distortion of floor structure were examined numerically.The results indicate that the established elastic FEM model for floor structure is reliable for predicting the distribution of welding distortion in view of the good agreement between the calculated results and the measured distortion for real double floor structure.Compared with the welding sequence,the clamping configuration and the reverse deformation have a significant influence on the welding distortion of floor structure.In the case of30 mm reverse deformation,the maximum deformation can be reduced about 70%in comparison to an actual welding process.

Mode Control of Quasi-PT Symmetry in Laterally Multi-Mode Double Ridge Semiconductor Laser

In traditional semiconductor lasers, it is usual to obtain single lateral mode operation by narrowing the ridge of waveguide, which is sensitive to fabrication inaccuracies. To overcome this shortcoming, a quasi-PT(parity-time)symmetric double ridge semiconductor laser is proposed to reach single lateral mode operation for an intrinsic multi-mode stripe laser. The coupled mode theory is used to analyze the non-Hermitian modulation of the gain(or loss) of the PT symmetric double ridge laser to obtain the coupling coefficient between the two ridge waveguides. Finally, the mode field distributions of the quasi-PT symmetric double ridge laser are simulated before and after the spontaneous PT symmetry breaking, which keep the laser operating in single lateral mode.

Conceptual Design Optimization of Fighter Trainer Aircraft with Double-delta Wing Configuration

Compared with a delta wing aircraft, the double delta wing configuration has better aerodynamic performance at high angles of attack. An operational analysis was introduced as a method for evaluating training effectiveness of trainer aircraft. Approaches to the engineering estimation of aerodynamic characteristics for aircraft with a double delta wing configuration were studied, and the procedures for determining aircraft performance indices formulated. Taking training effectiveness as the objective function and geometric parameters of the wing platform as design variables, through a numerical multivariate optimization arithmetic, the conceptual design optimization for a certain fighter trainer aircraft with double delta wing configuration was carried out under the constraints of tactical and technical requirements and interrelated geometry. Agreement of a calculation example with engineering practice indicates that the optimal design has higher training effectiveness than the baseline design, and in addition, improves the structural force bearing conditions.

Interface crack problems for mode Ⅱ of double dissimilar orthotropic composite materials

The fracture problems near the similar orthotropic composite materials are interface crack tip for mode Ⅱ of double disstudied. The mechanical models of interface crack for mode Ⅱ are given. By translating the governing equations into the generalized hi-harmonic equations, the stress functions containing two stress singularity exponents are derived with the help of a complex function method. Based on the boundary conditions, a system of non-homogeneous linear equations is found. Two real stress singularity exponents are determined be solving this system under appropriate conditions about bimaterial engineering parameters. According to the uniqueness theorem of limit, both the formulae of stress intensity factors and theoretical solutions of stress field near the interface crack tip are derived. When the two orthotropic materials are the same, the stress singularity exponents, stress intensity factors and stresses for mode II crack of the orthotropic single material are obtained.

Dynamic Modeling and Adaptive Fast Nonsingular Terminal Sliding Mode Control for Satellite with Double Rotary Payloads

A robust attitude control methodology is proposed for satellite system with double rotary payloads. The dynamic model is built by the Newton-Euler method and then the dynamic interconneetion between satellite＇s main body and payloads is described precisely. A nonlinear disturbance observer is designed for satellite＇s main body to estimate disturbance torque acted by motion of payloads. Meanwhile, the adaptive fast nonsingular terminal sliding-mode attitude stabilization controller is proposed for satellite＇s main body to quicken convergence speed of state variables. Similarly, the adaptive fast nonsingular terminal sliding-mode attitude maneuver controller is designed for each payload to weaken the disturbance effect of motion of satellite＇s main body. Simulation results verify the effectiveness of the proposed method.

Current Situation and Mode of Talent Training in Marine Cultural Industry Based on Collaborative Innovation of Governments,Enterprises,Colleges,Scientific Institutions and Users

Based on the present situation of talent training in marine cultural industry,the collaborative innovation mechanism of governments,enterprises,colleges,scientific institutions and users was used to construct the mode of talent training in marine cultural industry. It is needed to give full play to the active roles of governments,enterprises,colleges,scientific institutions and users in the training of marine cultural talents,develop training mode of innovative scientific and technological talents,speed up the construction of collaborative innovation ability of marine cultural talents,and improve the efficiency of talent training.

Nonlinear evolution and secondary island formation of the double tearing mode in a hybrid simulation

Double tearing modes(DTMs),induced by double current sheet configurations or two neighboring rational surfaces with the same safety factor in tokamaks,are widely observed in solar,space,and fusion plasmas.In this paper,the evolution of DTMs without a guide field is investigated numerically using a hybrid model(electron fluid+ion PIC).The overall evolution processes of DTMs are qualitatively consistent with previous works using other models.The particle dynamics during the evolution of DTMs is analyzed in detail.Behaviors of ions and electrons present different characteristics around the reconnection region which gives rise to Hall effects producing the out-of-plane quadrupole magnetic field.In the explosive reconnection process with interactions between two DTMs islands,the asymmetric drive and the thin current layer feature lead to the emergence of secondary magnetic islands which develop with the late evolution of the DTMs.

TRIZ: The Enlightenment of the Training Mode of Excellent Chinese Engineers

China has been the largest country in terms of the scale of higher engineering education in the world. The training plan of excellent engineers (TPEE) that launched in 2010 is to train various types of high-quality engineers and technical personnel who have strong innovative abilities and meet the need of economic and social development. The theory of inventive problem solving (TRIZ), as a scientific methodology to solve innovation problems, provides a theoretical basis and practical guideline for the training of excellent engineers. This paper analyzes the teaching philosophy and methods for the training of excellent engineers within TRIZ framework from the demand perspective, and then discusses the enlightenment of disseminating TRIZ in the following aspects, such as TRIZ application in science, technology, engineering, and mathematics (STEM) education, faculty development, platform development of innovative education and so on.

Reform and Practice on International Software Talent Training Mode

In view of the increasingly rapid development of global economic integration and combined with the existing modes of training international software engineering talents in China,this paper deeply analyzes and obtains the existing problems in the current teaching process,and proposes various teaching reform measures under the guidance of CDIO higher engineering education thought.Through many years of teaching practice experience,we can find that our reform has achieved remarkable results.

Research on the Current Condition of College Tourism Personnel Training Mode and Vocational Education Reforms

In this paper, we conduct research on the current condition of college tourism personnel training mode and vocational education reforms. Paying attention to the current social development innovation spirit, how to make students possess the necessary ability to innovate, is this the prime problem of the education. A lot of highly educated personnel in order to better adapt to social development and changes, constantly to learn knowledge, also has the characteristics of vocational college students. Our research combines the characteristics of the college tourism personnel training mode with the education reform which will enhance the performance of the teaching process.