Assessment and Visualization of Ki67 Heterogeneity in Breast Cancers through Digital Image Analysis

The Ki67 index (KI) is a standard clinical marker for tumor proliferation;however, its application is hindered by intratumoral heterogeneity. In this study, we used digital image analysis to comprehensively analyze Ki67 heterogeneity and distribution patterns in breast carcinoma. Using Smart Pathology software, we digitized and analyzed 42 excised breast carcinoma Ki67 slides. Boxplots, histograms, and heat maps were generated to illustrate the KI distribution. We found that 30% of cases (13/42) exhibited discrepancies between global and hotspot KI when using a 14% KI threshold for classification. Patients with higher global or hotspot KI values displayed greater heterogenicity. Ki67 distribution patterns were categorized as randomly distributed (52%, 22/42), peripheral (43%, 18/42), and centered (5%, 2/42). Our sampling simulator indicated analyzing more than 10 high-power fields was typically required to accurately estimate global KI, with sampling size being correlated with heterogeneity. In conclusion, using digital image analysis in whole-slide images allows for comprehensive Ki67 profile assessment, shedding light on heterogeneity and distribution patterns. This spatial information can facilitate KI surveys of breast cancer and other malignancies.

Digital Application Objectives and Benefit Analysis of BIM Technology in Large-Scale Comprehensive Development Projects

This paper discusses the digital application and benefit analysis of building information model(BIM)technology in the large-scale comprehensive development project of the Guangxi headquarters base.The project covers a total area of 92,100 square meters,with a total construction area of 379,700 square meters,including a variety of architectural forms.Through three-dimensional modeling and simulation analysis,BIM technology significantly enhances the design quality and efficiency,shortens the design cycle by about 20%,and promotes the collaboration and integration of project management,improving the management efficiency by about 25%.During the construction phase,the collision detection and four-dimensional visual management functions of BIM technology have improved construction efficiency by about 15%and saved the cost by about 10%.In addition,BIM technology has promoted green building and sustainable development,achieved the dual improvement of technical and economic indicators and social and economic benefits,set an example for enterprises in digital transformation,and opened up new market businesses.

Measurement of Coordinate Parameter by Multi-baseline Digital Close-range Photogrammetry System and Data Analysis for Jujube

[Objective] The aim was to explore the measurement of coordinate parameter by multi-baseline digital close-range photogrammetry system.[Method] The 3-dimensional coordinate of 8-year-old Jujube was measured by using Lensphoto multi-baseline digital close-range photogrammetry system,and through comparing with measured data of Total Station,the error and accuracy of photogrammetry data were analyzed.[Result] The absolute error of X,Y and Z coordinate was 0-0.014,0-0.018 and 0-0.004 m respectively,and the relative error of X,Y and Z coordinate was less than 0.145%.The significance test of pairs for the photogrammetry data and measured data of Total Station indicated that the space coordinate data of stumpage were accurately measured by using the multi-baseline digital close-range photogrammetry method,and the photogrammetry data meet the need of space coordinate measurement for virtual plant growth simulation.[Conclusion] This study had provided theoretical basis for the growth measurement of virtual plant growth simulation.

A Paraffin Sectioning Method Without Using the Microtome and an Analysis Method for Optical Information of the Plant Anatomical Digital Photographs

[Objective] The research aimed to study a paraffin method without using the microtome,and also introduced an analysis method for optical information of the plant anatomical digital photographs.[Method] The plant material softened or not was embedded in paraffin according to the paraffin method.Cut the thin paraffin sections from the paraffin block with a sharp two-sided blade under anatomical lens.The thin material sections rolled up when they were cut off.Took the section rolls to a slide,and then heated them to melt the paraffin section roll.When the paraffin melted,the sections of plant material were rolled out.After the common or simplified procedures of staining and mounting,the preparations were finished.When an anatomical digital photograph was processed,copy it into the word file and two copies of the original photograph were obtained.One copy was selected to make it to be a negative photograph,and then press the key ＂Press Screen＂ to copy the screen frame.After it was copied into the word file,cut of the unnecessary parts and other operations were carried out,then processed photograph was obtained.[Results] The anatomical preparation for research was gotten.The analyzed digital photograph of the leaf structure of Salix matsudana var.matsudana f.tortuosa has some a three-dimensional effect,and the different leaf structures and cells,e.g.cuticle,cell wall,protoplast,vein,etc.can be identified easily.[Conclusion]The paraffin method without using the microtome has advantages of low cost and higher efficiency,which could be applied by the beginner or in the time without a microtome to be used.The analysis of the plant anatomical digital photographs can acquire more structural information than the original digital photographs,which shows the potentiality and prospects of the optical information analysis of the microscopic imagery and its digital photograph.

<i>In Vitro</i>Bioassay of Allelopathy in Four Bamboo Species;<i>Bambusa multiplex, Phyllostachys bambusoides, P. nigra, Sasa kurilensis</i>, Using Sandwich Method and Protoplast Co-Culture Method with Digital Image Analysis

Moderately strong allelopathic activities were found in four bamboo species, Bambusa multiplex cv. Houraichiku;Phyllostachys bambusoides cv. Madake;P. nigra cv. Hachiku;Sasa kurilensis cv. Chishimazasa, which are of different classification or of different ecological distributions, using the “Sandwich Method”, which assays the dried leaves on growth of lettuce seedlings. Only small difference of activity was found among the four bamboo species. In addition, “Protoplast Co-culture Method” for assay of allelopathy in a 50 μL liquid medium using a 96 well culture plate, was applied to the suspension cultures of the four bamboo species. Protoplasts were isolated from two-week cultured suspension cells of four bamboo species using Cellulase RS and Pectolyase Y-23 in 0.6 M mannitol. At low protoplast densities of bamboo, B. multiplex and P. bambusoides stimulated the recipient lettuce growth, i.e., non-spherically cell enlargement and cell divisions observed under an inverted microscope, while protoplasts of P. nigra and S. kurilensis were less stimulatory or inhibitory. Inhibitory effect of S. kurilensis was the strongest among four bamboo species. Furthermore, highly inhibitory effects of S. kurilensis protoplasts on yellow color accumulation of lettuce protoplasts were clearly observed by analysis of a scanned digital image of a 96-well culture plate. Differences and causes of the allelopathic activities were discussed comparing with other plant species studied using the same assay methods.

Digital Twin for Human-Robot Interactive Welding and Welder Behavior Analysis

This paper presents an innovative investigation on prototyping a digital twin(DT)as the platform for human-robot interactive welding and welder behavior analysis.This humanrobot interaction(HRI)working style helps to enhance human users'operational productivity and comfort;while data-driven welder behavior analysis benefits to further novice welder training.This HRI system includes three modules:1)a human user who demonstrates the welding operations offsite with her/his operations recorded by the motion-tracked handles;2)a robot that executes the demonstrated welding operations to complete the physical welding tasks onsite;3)a DT system that is developed based on virtual reality(VR)as a digital replica of the physical human-robot interactive welding environment.The DT system bridges a human user and robot through a bi-directional information flow:a)transmitting demonstrated welding operations in VR to the robot in the physical environment;b)displaying the physical welding scenes to human users in VR.Compared to existing DT systems reported in the literatures,the developed one provides better capability in engaging human users in interacting with welding scenes,through an augmented VR.To verify the effectiveness,six welders,skilled with certain manual welding training and unskilled without any training,tested the system by completing the same welding job;three skilled welders produce satisfied welded workpieces,while the other three unskilled do not.A data-driven approach as a combination of fast Fourier transform(FFT),principal component analysis(PCA),and support vector machine(SVM)is developed to analyze their behaviors.Given an operation sequence,i.e.,motion speed sequence of the welding torch,frequency features are firstly extracted by FFT and then reduced in dimension through PCA,which are finally routed into SVM for classification.The trained model demonstrates a 94.44%classification accuracy in the testing dataset.The successful pattern recognition in skilled welder operations should benefit to accelerate novice welder training.

A new GIS-compatible methodology for visibility analysis in digital surface models of earth sites

As a GIS tool,visibility analysis is used in many areas to evaluate both visible and non-visible places.Visibility analysis builds on a digital surface model describing the terrain morphology,including the position and shapes of all objects that can sometimes act as visibility barriers.However,some barriers,for example vegetation,may be permeable to a certain degree.Despite extensive research and use of visibility analysis in different areas,standard GIS tools do not take permeability into account.This article presents a new method to calculate visibility through partly permeable obstacles.The method is based on a quasi-Monte Carlo simulation with 100 iterations of visibility calculation.Each iteration result represents 1%of vegetation permeability,which can thus range from 1%to 100%visibility behind vegetation obstacles.The main advantage of the method is greater accuracy of visibility results and easy implementation on any GIS software.The incorporation of the proposed method in GIS software would facilitate work in many fields,such as architecture,archaeology,radio communication,and the military.

Collagen proportionate area of liver tissue determined by digital image analysis in patients with HBV-related decompensated cirrhosis

BACKGROUND: The accurate assessment of the degree of hepatic fibrosis plays a critical role in guiding the diagnosis, treatment and prognostic assessment of chronic liver diseases. Liver biopsy is currently the most reliable method to evaluate the severity of hepatic fibrosis. However, liver biopsy is an invasive procedure associated with morbidity and mortality, and has several limitations in patients with decompensated cirrhosis. There is no report on the collagen proportionate area (CPA) of liver tissue in the decompensated stage of cirrhosis. This study aimed to determine the CPA of resected liver tissue samples from patients with HBV-related decompensated cirrhosis using digital image analysis, and to analyze the relationship between the CPA and liver functional reserve. METHODS: Fifty-three resected liver tissue samples from liver transplant patients with chronic hepatitis B-induced decompensated cirrhosis were stained with Masson’s trichrome, and the CPA in these samples was quantitatively determined using digital image analysis. The values of relevant liver function just before liver transplantation, the CPA in liver tissue, and their correlation were analyzed. RESULTS: The mean CPA at the decompensated stage of cirrhosis was 35.93±14.42% (11.24%-63.41%). The correlation coefficients of the CPA with a model for end-stage liver disease score, serum total bilirubin and international standard ratio of prothrombin B were 0.553, 0.519 and 0.533, respectively (P<0.001). With increasing CPA values, the three indices reflecting liver functional reserve also changed significantly.CONCLUSIONS: The degree of fibrosis may be correlated with the functional reserve. With the advancement of fibrosis, the liver functional reserve is attenuated accordingly.

Modeling and Analysis of Production Logistics Spatio-Temporal Graph Network Driven by Digital Twin

In the process of logistics distribution of manufacturing enterprises, the automatic scheduling method based on the algorithm model has the advantages of accurate calculation and stable operation, but it excessively relies on the results of data calculation, ignores historical information and empirical data in the solving process, and has the bottleneck of low processing dimension and small processing scale. Therefore, in the digital twin(DT) system based on virtual and real fusion, a modeling and analysis method of production logistics spatio-temporal graph network model is proposed, considering the characteristics of road network topology and time-varying data. In the DT system, the temporal graph network model of the production logistics task is established and combined with the network topology, and the historical scheduling information about logistics elements is stored in the nodes. When the dynamic task arrives, a multi-stage links probability prediction method is adopted to predict the possibility of loading, driving, and other link relationships between task-related entity nodes at each stage. Several experiments are carried out, and the prediction accuracy of the digital twin-based temporal graph network(DTGN) model trained by historical scheduling information reaches 99.2% when the appropriate batch size is selected. Through logistics simulation experiments, the feasibility and the effectiveness of production logistics spatio-temporal graph network analysis methods based on historical scheduling information are verified.

In-situ strain measurement and error analysis of arc welding with 2D digital image correlation

The deformation and residual stress generated by the welding process can seriously affect the use of components.As a result,it is very important to understand the evolution of stress and strain during the welding process.The strain measurement method based on digital image correlation(DIC)is an excellent method to detect welding strain and residual stress.The out-of-plane translation and out-of-plane rotation introduce errors to the two-dimensional DIC.In this paper,the causes of errors are analyzed theoretically,and the formulas of errors caused by the out-of-plane displacement and the out-of-plane rotation are derived.The out-of-plane translation experiment and the out-of-plane rotation experiment were carried out to verify the theory,and the experimental results are consistent with the theoretical analysis results.The error caused by the out-of-plane translation can be reduced by increasing the object distance;the error caused by the out-of-plane rotation is greatly affected by the rotation angle.

The hot issues of studies in China on digital information resources: Based on co-word analysis

With the SPSS and the help of factor method and hierarchical clustered method,journal articles on digital information resources(DIR) from CNKI in the past ten years are analyzed with a co-word analytical method in this paper. The hot issues of studies on DIR and the relationship between those subjects are analyzed in this investigation as well.

Development of the HL-2M digital pulse analysis system

A digital pulse analysis system is an important diagnostic system in nuclear physics experimental research.In response to the demand for reflecting the particle state in a nuclear physics experiment,we have designed and developed a real-time digital pulse analysis system and applied it to the digital nuclear pulse waveform discrimination of different detectors in the HL-2M tokamak.The system is based on the peripheral component interconnect extensions for instrumentation(PXI)platform,while its software was written in LABVIEW.The key technologies involved in the system implementation include digital pulse analysis technology,digital discrimination technology,pulse height analysis technology,etc.The system has been applied to the plastic scintillator detector at the Neutron Source Lab of the University of Science and Technology of China.And the experimental results indicate that the system can discriminate between neutron(n)particles and gamma(γ)particles well when used to measure the plastic scintillator detector.

The Response Time Analysis of Digital Broadcasting System

Digital broadcasting system has become a high-light of research on computer application. To respond to the changes of the playbill in the broadcasting system in real time, the response time of the system must be studied. There is scarcely the research on this area currently. The influence factors in the response time are analyzed; the model on the response time of the system service is built; how the influence factors affect the response time of the system service is validated; and four improvement measures are proposed to minimize the response time of system service.

DIGITAL IMAGE ANALYSIS OF PHASE STRUCTURE IN THE BLEND OF POLY(BUTYLENE TEREPHTHALATE-COCAPROLACTONE) WITH POLYCARBONATE

The digital image processing technique was used for the extraction of physical information from the temporal image of phase structure in the process of phase separation in the blend of poly (butylene terephthalate-co-caprolactone )with polycarbonate. The power spectrum images of the two-dimensional Fourier transformation (2DFT) of the temporal image of phase structure reflect the change of the phase size with time.

Some of Advances on the Error Analysis in the Frequency Domain for a Digital Simulation Model

This paper surveys a number of recent advances in the error analysis in the frequency domain for a digital simulation model. It is emphasized to discuss the errors in characteristic roots and transfer funcnon of the digital simulation model, the frequency domain errors of the data transfers between thesimulation submodels, and some compensation methods for the errors. Some of the questions to be answered are also presented.

Stability and performance analysis of a jump linear control system subject to digital upsets

This paper focuses on the methodology analysis for the stability and the corresponding tracking performance of a closed-loop digital jump linear control system with a stochastic switching signal. The method is applied to a flight control system. A distributed recoverable platform is implemented on the flight control system and subject to independent digital upsets. The upset processes are used to stimulate electromagnetic environments. Specifically, the paper presents the scenarios that the upset process is directly injected into the distributed flight control system, which is modeled by independent Markov upset processes and independent and identically distributed （IID） processes. A theoretical performance analysis and simulation modelling are both presented in detail for a more complete independent digital upset injection. The specific examples are proposed to verify the methodology of tracking performance analysis. The general analyses for different configurations are also proposed. Comparisons among different configurations are conducted to demonstrate the availability and the characteristics of the design.

Optimization of Baosteel's digital automatic analysis technique for maceral specification

Baosteel developed a digital automatic analysis technique for maceral specification in 2002. This analysis system combines digital image processing, graphics, databases, expert systems, artificial intelligence and other advanced technologies. After 6 years of application in coke production, the system proved itself successful in coal quality testing and coal blending guidance on maceral. However,during this long process, some inadequacies were found that impacted the precision and accuracy of the analysis. So ,in 2008 Baosteel began to work on improving the coal maceral analysis system. The improvements included the following：further upgrading and enhancing the analysis performance of microscopic images ;extending the gray levels to increase the reflectance measurement accuracy 64 times;changing the focus method and effectively eliminating the interference of halo. In addition, an improved image recognition method was adopted to make the extraction of vitrinite more accurate and a new model of coal constituent algorithm was added which can accurately determine the composition of maceral （exinite, vitrinite,inertinite）. Since these improvements were completed, the system has achieved higher automation, speed and accuracy, collected more information and performed more accurate maceral analysis for coke production. Meanwhile, the improved system has provided a reliable analytical basis for the further study on the relationship between coke quality and coal blending.

Digital Forensic Analysis on Runtime Instruction Flow

Computer system＇s runtime information is an essential part of the digital evidence. Current digital forensic approaches mainly focus on memory and I/O data, while the runtime instructions from processes are often ignored. We present a novel approach on runtime instruction forensic analysis and have developed a forensic system which collects instruction flow and extracts digital evidence. The system is based on whole-system emulation technique and analysts are allowed to define analysis strategy to improve analysis efficiency and reduce overhead. This forensic approach and system are applicable to binary code analysis, information retrieval and matware forensics.

Application of Spectral Analysis in Multichannel Digital Filter

The paper proposes a multichannel digital filtering method for signal, discusses the application of spectral analysis in the method, and introduces an improved fast transformation formula for Fourier forward and inverse transformation.

Visual Analysis of Digital Healthcare Based on CiteSpace

Objective: Digital healthcare is rapidly becoming a new model for medical development in the information society with its convenience, and personalization, and a research boom in digital healthcare has formed at home and abroad in recent years. The purpose of this study is to conduct a bibliometric analysis of the field of digital healthcare and to understand the research background and development trend in this field. Methods: A visual analysis of authors, institutions, journals and keywords was conducted using CiteSpace 5.8R3 software. Results: A total of 1646 digital healthcare-related retrieved from WoS and PubMed studies. There was an overall upward trend in the number of digital healthcare publications, with the highest number of publications in 2021 (290). The author AZIZ SHEIKH is ranked first in the number of published articles (13), while King Saud University (23) is the research institution with the most articles. Keyword clustering showed that the first cluster was data security;the common high frequency keywords that appeared were systems (85), artificial intelligence (82), mobile health (70), internet (61), and technology (57). Digital healthcare, artificial intelligence, healthcare services, machine learning and deep learning are the hotspot of current research. Conclusion: This paper summarises the state of the art in digital healthcare research. Using statistical analysis and network visualisation, it highlights the background, trends and hot topics in digital healthcare research. The paper finds that there is significant potential for artificial intelligence to help bridge the digital divide and reduce health inequalities. To understand the current state, hot trends and future directions of digital healthcare research, this paper can serve as a reference. .