A numerical technique of the target-region locating （TRL） solver in conjunction with the wave-front method is presented for the application of the finite element method （FEM） for 3-D electromagnetic computation. F...A numerical technique of the target-region locating （TRL） solver in conjunction with the wave-front method is presented for the application of the finite element method （FEM） for 3-D electromagnetic computation. First, the principle of TRL technique is described. Then, the availability of TRL solver for nonlinear application is particularly discussed demonstrating that this solver can be easily used while still remaining great efficiency. The implementation on how to apply this technique in FEM based on magnetic vector potential （MVP） is also introduced. Finally, a numerical example of 3-D magnetostatic modeling using the TRL solver and FEMLAB is given. It shows that a huge computer resource can be saved by employing the new solver.展开更多
A distinctive method is proposed by simply utilizing ultrasonic technique in Ti02 electrode fabrication in order to improve the optoelectronic performance of dye-sensitized solar cells （DSSCs）. Dye molecules are at ...A distinctive method is proposed by simply utilizing ultrasonic technique in Ti02 electrode fabrication in order to improve the optoelectronic performance of dye-sensitized solar cells （DSSCs）. Dye molecules are at random and single molecular state in the ultrasonic field and the ultrasonic wave favors the diffusion and adsorption processes of dye molecules. As a result, the introduction of ultrasonic technique at room temperature leads to faster and more well-distributed dye adsorption on TiO2 as well as higher cell efficiency than regular deposition, thus the fabrication time is markedly reduced. It is found that the device based on 40 kHz ultrasonic （within 1 h） with N719 exhibits a Voc of 789 mV, Jsc of 14.94 mA]cm2 and fill factor （FF） of 69.3, yielding power conversion efficiency （PCE） of 8.16%, which is higher than device regularly dyed for 12 h （PCE = 8.06%）. In addition, the DSSC devices obtain the best efficiency （PCE = 8.68%） when the ultrasonic deposition time increases to 2.5 h. The DSSCs fabricated via ultrasonic technique presents more dye loading, larger photocurrent, less charge recombination and higher photovoltage. The charge extraction and electron impedance spectroscopy （EIS） were performed to understand the influence of ultrasonic technique on the electron recombination and performance of DSSCs.展开更多
Fast Plant(Brassica rapa,Cruciferae)leaf tissuefixed in glutaraldehyde-acrolein and post-fixed in os-mium,was examined for response to several easily-prepared heavy metal stains.Lead and uranium,separately and in comb...Fast Plant(Brassica rapa,Cruciferae)leaf tissuefixed in glutaraldehyde-acrolein and post-fixed in os-mium,was examined for response to several easily-prepared heavy metal stains.Lead and uranium,separately and in combination,gave typical resultsacross the spectrum of cell organellets.As a single stainfollowing osmium,bismuth produced images seeminglyequivalent to lead and uranium.Phosphotungstic acidproduced very good membrane delineation but produceda washed-out background image similar to that from leadstaining.Carbohydrate compounds were especiallyresponsive to ruthenium;the cytoplasm and the matrixof all organelles were also stained very well.Theprocedures were no more demanding than traditionalstaining methods and may be easily used in research andteaching.Fast Plant materials are a reliable,quick andeasy source of living material.展开更多
In this research,the ultrasonic ball milling technique has been used to fabricate lead zirconate titanate(PZT)ceramics.PZT with the composition nearly the morphotropic phase boundary(MPB):Pb(Zr_ 0.52Ti_ 0.48)O_3 was s...In this research,the ultrasonic ball milling technique has been used to fabricate lead zirconate titanate(PZT)ceramics.PZT with the composition nearly the morphotropic phase boundary(MPB):Pb(Zr_ 0.52Ti_ 0.48)O_3 was studied.The effect of milling time on phase formation of sample powder was examined by X-ray diffraction technique(XRD).Moreover,the physical,dielectric,piezoelectric properties and microstructure of PZT ceramics were investigated.The present results reveal that the ultrasonic ball milling technique results the homogeneous and small size of PZT powder.Furthermore,there is a significantly change occurs in the size of the particles with the short time of milling process.展开更多
A biaxial rotational technique is proposed to improve the neutron irradiation uniformity for a large sample,and the theoretical method is established to predict and design the main parameters. The technique used a dev...A biaxial rotational technique is proposed to improve the neutron irradiation uniformity for a large sample,and the theoretical method is established to predict and design the main parameters. The technique used a device to rotate the target sample around two perpendicular axes simultaneously. Numerical calculations found that the lowest common multiple of the two angular speeds should be large enough to improve the uniformity,and the minimal experimental time should be no less than 600 s. For a three-dimensional sample with a size of 20 cm × 12 cm × 14 cm, the maximal non-uniform neutron irradiation factor of the sample is mainly determined by the distance between the center of the sample and of the point neutron source. It was computed to be less than 10% when the distance was no less than 34 cm. Experiments were carried out on the CFBR-II reactor and the experimental results were in good accordance with the theoretical analysis. As a result, the theoretical conclusions given above are reasonable and of reference value for the design of future irradiation experiments.展开更多
To overcome the current difficulties of high-precision machining and the high manufacturing and maintenance costs of spherical seals for deep-water drilling ball joints,a new spherical seal technique is proposed in th...To overcome the current difficulties of high-precision machining and the high manufacturing and maintenance costs of spherical seals for deep-water drilling ball joints,a new spherical seal technique is proposed in this paper.The spherical seal is mainly composed of silicone rubber and polytetrafluoroethylene(PTFE).Rational structural design makes the seal independent from the ball and other components,making it easy to replace if leakage occurs at its surface.PTFE can elastically deform over a certain deformation range,which guarantees that two sealing surfaces fit tightly together.O-Ring and PTFE elasticity makes up for any lack of accuracy during spherical machining and decreases the machining precision requirements for spherical surfaces.Using a finite element technique and nonlinear theory,the performance of the spherical seal under the influence of various factors is determined.The results show that the spherical seal designed in this paper exhibits excellent sealing performance under lowtemperature and high-pressure conditions.The spherical seal,a combination of an O-ring and PTFE,has the advantages of cheap manufacturing and maintenance costs and excellent sealing performance.展开更多
Based on the mechanism of imagery, a novel method called the delaminating combining template method, used for the problem of super-resolution reconstruction from image sequence, is described in this paper. The combini...Based on the mechanism of imagery, a novel method called the delaminating combining template method, used for the problem of super-resolution reconstruction from image sequence, is described in this paper. The combining template method contains two steps： a delaminating strategy and a combining template algorithm. The delaminating strategy divides the original problem into several sub-problems; each of them is only eonnected to one degrading factor. The combining template algorithm is suggested to resolve each sub-problem. In addition, to verify the valid of the method, a new index called oriental entropy is presented. The results from the theoretical analysis and experiments illustrate that this method to be promising and efficient.展开更多
Five-hundred-meter Aperture Spherical radio Telescope(FAST)is the world’s largest single dish radio telescope,which is located in Guizhou Province,in southwest China.The FAST feed cabin is supported and positioned by...Five-hundred-meter Aperture Spherical radio Telescope(FAST)is the world’s largest single dish radio telescope,which is located in Guizhou Province,in southwest China.The FAST feed cabin is supported and positioned by six steel cables.The deviation of the feed position and orientation would lead to loss in the telescope efficiency.In this paper,a series of electromagnetic(EM)simulations of the FAST facility with varying feed positions and orientation offsets was performed.The maximum gain of FAST is about 82.3 dBi and the sibelobe is–32 dB with respect to the main beam at 3 GHz.The simulation results have demonstrated that the telescope efficiency loss is more sensitive to the lateral feed deviation compared with the axial deviation.The telescope efficiency would decrease by 8.2%due to the FAST feed position deviation of 10 mm rms when the observing frequency is 3 GHz.The FAST feed deviation basically has no effect on the sidelobes and cross polarization characteristic according to the simulations.展开更多
针对密度峰值聚类算法DPC(clustering by fast search and find of density peaks)时间复杂度高、准确度低的缺陷,提出了一种基于Ball-Tree优化的快速密度峰值聚类算法BT-DPC。算法利用第k近邻度量样本局部密度,通过构建Ball-Tree加速...针对密度峰值聚类算法DPC(clustering by fast search and find of density peaks)时间复杂度高、准确度低的缺陷,提出了一种基于Ball-Tree优化的快速密度峰值聚类算法BT-DPC。算法利用第k近邻度量样本局部密度,通过构建Ball-Tree加速密度ρ及距离δ的计算;在类簇分配阶段,结合k近邻思想设计统计学习分配策略,将边界点正确归类。通过在UCI数据集上的实验,将该算法与原密度峰值聚类算法及其改进算法进行了对比,实验结果表明,BT-DPC算法在降低时间复杂度的同时提高了聚类的准确度。展开更多
基金Open Funds of State Key Laboratory of MillimeterWaves,China (No. K200401), Outstanding Teaching and ResearchAwards for Young Teachers of Nanjing Normal University (No.1320BL51)
文摘A numerical technique of the target-region locating （TRL） solver in conjunction with the wave-front method is presented for the application of the finite element method （FEM） for 3-D electromagnetic computation. First, the principle of TRL technique is described. Then, the availability of TRL solver for nonlinear application is particularly discussed demonstrating that this solver can be easily used while still remaining great efficiency. The implementation on how to apply this technique in FEM based on magnetic vector potential （MVP） is also introduced. Finally, a numerical example of 3-D magnetostatic modeling using the TRL solver and FEMLAB is given. It shows that a huge computer resource can be saved by employing the new solver.
基金supported by the Science Fund for Creative Research Groups(21421004)the National Basic Research 973 Program(2013CB733700)NSFC/China(21172073,21372082,21572062 and 91233207)
文摘A distinctive method is proposed by simply utilizing ultrasonic technique in Ti02 electrode fabrication in order to improve the optoelectronic performance of dye-sensitized solar cells （DSSCs）. Dye molecules are at random and single molecular state in the ultrasonic field and the ultrasonic wave favors the diffusion and adsorption processes of dye molecules. As a result, the introduction of ultrasonic technique at room temperature leads to faster and more well-distributed dye adsorption on TiO2 as well as higher cell efficiency than regular deposition, thus the fabrication time is markedly reduced. It is found that the device based on 40 kHz ultrasonic （within 1 h） with N719 exhibits a Voc of 789 mV, Jsc of 14.94 mA]cm2 and fill factor （FF） of 69.3, yielding power conversion efficiency （PCE） of 8.16%, which is higher than device regularly dyed for 12 h （PCE = 8.06%）. In addition, the DSSC devices obtain the best efficiency （PCE = 8.68%） when the ultrasonic deposition time increases to 2.5 h. The DSSCs fabricated via ultrasonic technique presents more dye loading, larger photocurrent, less charge recombination and higher photovoltage. The charge extraction and electron impedance spectroscopy （EIS） were performed to understand the influence of ultrasonic technique on the electron recombination and performance of DSSCs.
文摘Fast Plant(Brassica rapa,Cruciferae)leaf tissuefixed in glutaraldehyde-acrolein and post-fixed in os-mium,was examined for response to several easily-prepared heavy metal stains.Lead and uranium,separately and in combination,gave typical resultsacross the spectrum of cell organellets.As a single stainfollowing osmium,bismuth produced images seeminglyequivalent to lead and uranium.Phosphotungstic acidproduced very good membrane delineation but produceda washed-out background image similar to that from leadstaining.Carbohydrate compounds were especiallyresponsive to ruthenium;the cytoplasm and the matrixof all organelles were also stained very well.Theprocedures were no more demanding than traditionalstaining methods and may be easily used in research andteaching.Fast Plant materials are a reliable,quick andeasy source of living material.
文摘In this research,the ultrasonic ball milling technique has been used to fabricate lead zirconate titanate(PZT)ceramics.PZT with the composition nearly the morphotropic phase boundary(MPB):Pb(Zr_ 0.52Ti_ 0.48)O_3 was studied.The effect of milling time on phase formation of sample powder was examined by X-ray diffraction technique(XRD).Moreover,the physical,dielectric,piezoelectric properties and microstructure of PZT ceramics were investigated.The present results reveal that the ultrasonic ball milling technique results the homogeneous and small size of PZT powder.Furthermore,there is a significantly change occurs in the size of the particles with the short time of milling process.
基金Supported by the National Science Foundation of China(No.11305152)the Science and Technology Development Foundation of CAEP(Nos.2014B0103006 and 2012A0103002)
文摘A biaxial rotational technique is proposed to improve the neutron irradiation uniformity for a large sample,and the theoretical method is established to predict and design the main parameters. The technique used a device to rotate the target sample around two perpendicular axes simultaneously. Numerical calculations found that the lowest common multiple of the two angular speeds should be large enough to improve the uniformity,and the minimal experimental time should be no less than 600 s. For a three-dimensional sample with a size of 20 cm × 12 cm × 14 cm, the maximal non-uniform neutron irradiation factor of the sample is mainly determined by the distance between the center of the sample and of the point neutron source. It was computed to be less than 10% when the distance was no less than 34 cm. Experiments were carried out on the CFBR-II reactor and the experimental results were in good accordance with the theoretical analysis. As a result, the theoretical conclusions given above are reasonable and of reference value for the design of future irradiation experiments.
文摘To overcome the current difficulties of high-precision machining and the high manufacturing and maintenance costs of spherical seals for deep-water drilling ball joints,a new spherical seal technique is proposed in this paper.The spherical seal is mainly composed of silicone rubber and polytetrafluoroethylene(PTFE).Rational structural design makes the seal independent from the ball and other components,making it easy to replace if leakage occurs at its surface.PTFE can elastically deform over a certain deformation range,which guarantees that two sealing surfaces fit tightly together.O-Ring and PTFE elasticity makes up for any lack of accuracy during spherical machining and decreases the machining precision requirements for spherical surfaces.Using a finite element technique and nonlinear theory,the performance of the spherical seal under the influence of various factors is determined.The results show that the spherical seal designed in this paper exhibits excellent sealing performance under lowtemperature and high-pressure conditions.The spherical seal,a combination of an O-ring and PTFE,has the advantages of cheap manufacturing and maintenance costs and excellent sealing performance.
文摘Based on the mechanism of imagery, a novel method called the delaminating combining template method, used for the problem of super-resolution reconstruction from image sequence, is described in this paper. The combining template method contains two steps： a delaminating strategy and a combining template algorithm. The delaminating strategy divides the original problem into several sub-problems; each of them is only eonnected to one degrading factor. The combining template algorithm is suggested to resolve each sub-problem. In addition, to verify the valid of the method, a new index called oriental entropy is presented. The results from the theoretical analysis and experiments illustrate that this method to be promising and efficient.
基金funded by the National Natural Science Foundation of China(Grant No.11303062)
文摘Five-hundred-meter Aperture Spherical radio Telescope(FAST)is the world’s largest single dish radio telescope,which is located in Guizhou Province,in southwest China.The FAST feed cabin is supported and positioned by six steel cables.The deviation of the feed position and orientation would lead to loss in the telescope efficiency.In this paper,a series of electromagnetic(EM)simulations of the FAST facility with varying feed positions and orientation offsets was performed.The maximum gain of FAST is about 82.3 dBi and the sibelobe is–32 dB with respect to the main beam at 3 GHz.The simulation results have demonstrated that the telescope efficiency loss is more sensitive to the lateral feed deviation compared with the axial deviation.The telescope efficiency would decrease by 8.2%due to the FAST feed position deviation of 10 mm rms when the observing frequency is 3 GHz.The FAST feed deviation basically has no effect on the sidelobes and cross polarization characteristic according to the simulations.
文摘针对密度峰值聚类算法DPC(clustering by fast search and find of density peaks)时间复杂度高、准确度低的缺陷,提出了一种基于Ball-Tree优化的快速密度峰值聚类算法BT-DPC。算法利用第k近邻度量样本局部密度,通过构建Ball-Tree加速密度ρ及距离δ的计算;在类簇分配阶段,结合k近邻思想设计统计学习分配策略,将边界点正确归类。通过在UCI数据集上的实验,将该算法与原密度峰值聚类算法及其改进算法进行了对比,实验结果表明,BT-DPC算法在降低时间复杂度的同时提高了聚类的准确度。
基金Supported by National Basic Research Program of China （973 Program） （2009CB320601）, National Natural Science Foundation of China （50977008, 60774048）, and the Program for Cheung Kong Scholars
