The Mode of Data Exchange between PHRDC and HIS

参照国家有关个人健康档案的标准。分析HIS与PHRDC之间门诊、住院等不同医疗信息的数据交换时机及不同类型医院HIS与PHRDC的数据交换方式。以研究医疗机构与个人健康档案数据中心之间接口。并设计不同的交换方式和数据交换时机。针对不同医疗信息、医疗机构规模，提出不同的数据交换时机和交换方式，实现个人健康档案数据中心与HIS数据交换根据固化医疗信息的特点择时上传。并能挑选符合自身实际的数据交换方式。

Source Separation of Diesel Engine Vibration Based on the Empirical Mode Decomposition and Independent Component Analysis

Vibration signals from diesel engine contain many different components mainly caused by combustion and mechanism operations,several blind source separation techniques are available for decomposing the signal into its components in the case of multichannel measurements,such as independent component analysis（ICA）.However,the source separation of vibration signal from single-channel is impossible.In order to study the source separation from single-channel signal for the purpose of source extraction,the combination method of empirical mode decomposition（EMD） and ICA is proposed in diesel engine signal processing.The performance of the described methods of EMD-wavelet and EMD-ICA in vibration signal application is compared,and the results show that EMD-ICA method outperforms the other,and overcomes the drawback of ICA in the case of single-channel measurement.The independent source signal components can be separated and identified effectively from one-channel measurement by EMD-ICA.Hence,EMD-ICA improves the extraction and identification abilities of source signals from diesel engine vibration measurements.

Adsorption of Ce(Ⅳ) Anionic Nitrato Complexes onto Anion Exchangers and Its Application for Ce(Ⅳ) Separation from Rare Earths(Ⅲ)

Ce （Ⅳ） nitrato complexes were adsorbed on two anion exchangers based on polyvinyl pyridine （PVP） and quatemized PVP incorporated into porous silica matrix. The effect of nitric acid concentration （0.5～6 mol·L^-1） and temperature （278 ～318 K） on Ce（ Ⅳ ） sorption efficiency was investigated. Sorption increased with increasing nitric acid concentration, indicating that [Ce（NO3）6]^2- complex is the main adsorbed Ce（Ⅳ） species. Oxidation of sorbents by adsorbed Ce （ Ⅳ ） species resulting in Ce （ Ⅲ ） release to the solution was observed. Pyridine based anion exchangers exhibited higher oxidation stability compared to the commercial strong base anion exchanger. Ce（ Ⅳ ） reduction was temperature dependent and obeyed pseudo-first-order reaction kinetics. Column separation of Ce （ Ⅳ ） from La （ Ⅲ ） and Y （ Ⅲ ） was carried out from 6 mol·L^-1 nitric acid with PVP based anion exchanger. Reasonable Ce （Ⅳ） breakthrough capacity （0.7 mol·kg^-1 PVP） was achieved. No remarkable decrease of capacity was observed within 3 consequent runs. In contrast, Ce （Ⅲ） leakage due to reduction decreased and breakthrough capacity slightly increased. This effect was more pronounced with increasing temperature. Regeneration with 0.1 mol·L^- 1 nitric acid was successful （recovery 100% ± 4% ） and Ce solution of high purity （ 〉 99.97% ） with respect to La and Y content was gained.

Exchange Bias Effect in Phase Separated La0.33Pr0.34Ca0.33MnO3 Thin Films

Exchange bias effect is observed in the phase separated La0.33Pr0.34Ca0.33MnO3 thin films. High exchange bias field of about 1 kOe is achieved at 4 K. The exchange bias effect in La0.33Pr0.34Ca0.33MnO3 thin films might originate from the intrinsic phase separation of the La0.33Pr0.34Ca0.33MnO3 or surface effect. The dependence of exchange bias effect on temperature, cooling field, and thickness is also investigated. This work would open an avenue to the application in the magnetic memory devices based on the phase separated manganites.

Experimental Investigation on Heat Exchange and Separation Performance of an Annular Structured Internal Heat-integrated Distillation Column

In this paper heat exchange coefficient and separation efficiency of an annular structured internal heat-integrated distillation column(HIDi C) were experimentally measured. About 50% heat of the inner column could be transferred to the outer column. The overall heat exchange coefficient decreased with an increase in pressure ratio of the inner column and the outer column, but was little affected by the F-factor. The increase of the pressure ratio decreased obviously the separation efficiency of the outer column but had little effect on that of the inner column.

Separation process study of liquid phase catalytic exchange reaction based on the Pt/C/PTFE catalysts

The liquid phase catalytic exchange(LPCE) reaction is an effective process for heavy water detritiation and production of deuterium-depleted potable water. In the current study, hydrophobic carbon-supported platinum catalysts(Pt/C/PTFE) with high efficiency as reported previously for LPCE were prepared and comprehensive performance evaluation method is applied to evaluate the separation behaviors of LPCE systematically. Experimental results indicate that the optimum reaction temperature of 60–80℃ and the molar feed ratio G/L of 1.5–2.5 would lead to higher separation efficiencies. As to the packing method, a random packing mode with a packing ratio of hydrophobic catalysts 0.25 is recommended. In addition, thermodynamic analysis corresponds well with experimental results under lower temperature and G/L, while the suppression of kinetic factors should not be neglected when T > 80℃ and G/L > 1.5.

Separation of Clay Minerals from Host Sediments Using Cation Exchange Resins

Classic physical and chemical treatments applied to separating clay minerals from the host sediments are often difficult or aggressive for clay minerals. A technique using cation exchange resins (amberlite IRC\|50H and amberlite IR\|120) is used to separate clay minerals from the host sediments. The technique is based on the exchange of cations in the minerals that may be associated clay minerals in sediments, such as Ca and Mg from dolomite; Ca from calcite, gypsum and francolite with cations carried by resin radicals. The associated minerals such as gypsum, calcite, dolomite and francolite are removed in descending order. Separation of clay minerals using cation exchange resins is less aggressive than that by other classic treatments. The efficiency of amberlite IRC\|50H in the removal of associated minerals is greater than that of amberlite IR\|120.

Study on the Separation of Co^(2+) from Zn^(2+) , Cd^(2+) by Anion-exchange Chromatography

The separation of Co 2+ from Zn 2+ , Cd 2+ by anion exchange chromatography was discussed. The chromatographic column containing anion resin 201×7 which was saturated with a solution of ammonium chloride. The effects of the eluant acidity and eluant composition on the separation were investigated. The results indicate that this anion exchange chromatography is suitable to the separation of Co 2+ from Zn 2+ , Cd 2+ , and the condition of separation is simple and convenient. When the column is saturated with NH 4Cl solution (2.0 mol/L, pH=4.0), the separation can be completed effectively. Zn 2+ and Cd 2+ can also be separa ted when different eluants are used and the pure solution with high concentration of Zn 2+ , Cd 2+ respectively can be obtained ea sily.

Chiral ionic liquids as chiral selectors for separation of tryptophan enantiomers by ligand exchange chromatography

Chiral ionic liquids (CILs) containing imidazolium cations and L-Proline (L-Pro) anions were applied as chiral selector to separate tryptophan (Trp) enantiomers on a C18 column by ligand exchange chromatography. Several factors influencing Trp enantiomers separation, such as alkyl chain length of CILs, concentrations of Cu2+ and CILs, pH of the mobile phase, flow rate, organic solvent and temperature, were studied. Under the optimal conditions, the Trp enantiomers could be successfully separated within 21 min with the resolution of 2.30. At the same time, some thermodynamical parameters were obtained. The experimental results show that the enthalpy values of the Trp enantiomers are negative, indicating that the separation process is exothermic. And the enthalpy values of D-Trp are larger than those of L-Trp, which indicates that L-Trp could form more stable ternary complexes with tryptophan enantiomers.

Modelling of graded index waveguide fabricated by ion exchange on Er^(3+) doped glass

A general numerical tool, based on thermal diffusion equation and full-vectorial eigen-mode equation, has been presented for the systematic analysis of graded index channel waveguide fabricated by ion exchange on Er^3＋ doped glass. Finite difference method with full-vectorial formulation （FV-FDM） is applied to solving the full-vectorial modes of graded index channel waveguide for the first time. The coupled difference equations based on magnetic fields in FV-FDM are derived from the Taylor series expansion and accurate formulation of boundary conditions. Hybrid nature of vectorial guided modes for both pump （980 nm） and signal light （1550 nm） are demonstrated by the simulation. Results show that the fabrication parameters of ion exchange, such as channel opening width and time ratio of second step to first step in ion exchange, have large influence on the properties of waveguide. By optimizing the fabrication parameters, maintenance of monomode for signal light and improvement of the gain dynamics can be achieved in Er^3＋ doped waveguide amplifier （EDWA） fabricated by ion exchange technique. This theoretical model is significant for the design and fabrication of EDWA with ion exchange technique. Furthermore, a single polarization EDWA, which operates at wavelength from 1528 nm to 1541 nm for HE polarization, is numerically designed.

Wideband dispersion removal and mode separation of Lamb waves based on two-component laser interferometer measurement

Ultrasonic Lamb waves are considered as a sensitive and effective tool for nondestructive testing and evaluation of plate-like or pipe-like structures. The nature of multimode and dispersion causes the wave packets to spread, and the modes overlap in both time and frequency domains as they propagate through the structures. By using a two-component laser interferometer technique, in combination with a priori knowledge of the dispersion characteristics and wave structure information of Lamb wave modes, a two-component signal processing technique is presented for implementing dispersion removal and mode separation simultaneously for two modes mixture signals of Lamb waves. The proposed algorithm is first processed and verified using synthetic Lamb wave signals. Then, the two-component displacements test experiment is conducted using different aluminum plate samples. Moreover, we confirm the effectiveness and robustness of this method.

Optimal design of the separate type heat pipe heat exchanger

Separate type heat pipe heat exchangers are often used for large-scale heat exchanging. The arrangement of such a heat exchanger conveniently allows heat input to and output from the heat exchanger at remote locations. The traditional method of designing an ordinary HPHE (heat pipe heat exchanger) is commonly applied in the separate type exchanger design, but the calculations have to be carried out separately, which makes it very complicated. In this work, the ε-NTU (effectiveness-Number of Transfer Units) method was applied for optimization analysis of single- or multi-level separate type heat pipe heat exchangers. An optimizing formula for single-level separate type heat pipe heat exchangers was obtained. The optimizing principles of effec- tiveness-NTU and heat transfer rate by the equal distribution method for multi-level separate type heat pipe heat exchanger are presented. The design of separate type heat pipe heat exchangers by the optimizing method is more convenient and faster than by the traditional method.

Continuous Separation of Cesium Based on NiHCF/PTCF Electrode by Electrochemically Switched Ion Exchange

Nickel hexacyanoferrate (NiHCF) film was synthesized on porous three-dimensional carbon felt (PTCF) substrate by repetitious batch chemical depositions, and the NiHCF/PTCF electrode was used as electrochemically switched ion exchange (ESIX) electrode in a packed bed for continuous separation for cesium ions. The morphologies of the prepared electrodes were characterized by scanning electron microscopy and the effects of solution concentration on the ion-exchange capacity of the electrodes were investigated by cyclic voltammetry technique. Cycling stability and long-term storage stability of NiHCF/PTCF electrodes were also studied. The NiHCF/PTCF electrodes with excellent ion-exchange ability were used to assemble a diaphragm-isolated ESIX reactor for cesium separation. Continuous separation of cesium and regeneration of NiHCF/PTCF electrode based on the diaphragm-isolated reactor were performed in a laboratory-scale two-electrode system.

Simulation and heat exchanger network designs for a novel single-column cryogenic air separation process

To realize the industrialization of the novel single-column air separation process proposed in previous work,steady-state simulation for four different configurations of the single-column process with ternary(nitrogen,oxygen and argon)is developed.Then,exergy analysis of the single-column processes is also carried out and compared with the conventional double-column air separation process at the same capacity.Furthermore,based on the steady-state simulation of single-column processes,the different heat exchanger networks(HENs)for the main heat exchanger and subcooler in each process are designed.To obtain better performance for this novel process,optimization of process configuration and operation is investigated.The optimal condition and configuration for this process is consisted as:feedstock is divided into two streams and the reflux nitrogen is compressed at the approximate temperature of 301 K.In addition,HEN is optimized to minimize the utilities.HENs without utilities are obtained for the four different configurations of single-column process.Furthermore,capital costs of the HEN for different cases are estimated and compared.

Poly [ (chloromethyl) styrene-co-divinylbenzene] Continuous Rod Column of Weak Cation Exchange Chromatography and its Applications in the Separation of Biopolymers

Macroporous poly [(chloromethyl) styrene-co-divinylbenzene] continuous rod was prepared by direct polymerization of the monomers in the presence of a porogenic diluent inside an empty chromatographic column. A new 'in-situ' technique was used to modify the synthesized polymer rod for a weak cation exchanger and it has been used successfully for the separation of biopolymers. It was found that the back pressure of the continuous rod column was much lower and its surface was proved to be modified well.

Separation of Neutral Amino Acids with Ligand Exchange Resins

Four neutral amino acids (Gly, Ala,.Val and Leu) were separated with ligand exchange resins. The separation capacity of the ligand exchange resins is compared with that of common ion exchange resins. The effects of eluent, column temperature, and central metal ions of the support on the separation are studied. The relationship between matrix structure of resins and their separation capacity is analysed.

Mode separation of resonant cavity by electromagnetic simulation

Presents the investigation of characteristics of mode separation in typical magnetron cavity for the great importance of precise prediction of mode separation used in the theoretical study and engineering design of magnetrons, and the comparative theoretical predication and simulation analysis made using field theory and computer simulation based on commercial EDA tools, Ansoft High Frequency Structure Simulator(HFSS)and POISSON SUPERFISH.

Effects of Polar Organic Solvent on Separation of Y(edta)^-/Nd(edta)^- Complexes on Polyacrylic Anion Exchangers

The use of polar organic solvents for the separations of rare earth elements (Ⅲ) is effective especially for their extensive separations despite the solubility limitations. The study shows that polyacrylate anion exchangers, particularly the weakly basic, gel anion exchanger Amberlite IRA 68, can be applied to the separation of rare earth complexes with EDTA in H_2O-methanol and H_2O-ethanol systems. In most cases the determined distribution coefficients of Ln^(3+) complexes with EDTA in mixed media like water-methanol on polyacrylate anion exchangers are larger than those in pure water (media.)

Prediction of Instability Separation Modes and Its Application in Practical Dynamic Security Region

The transient critical boundary of dynamic security region (DSR) can be approximated by a few hyper planes correlated with instability separation modes. A method to fast predict instability separation modes is proposed for DSR calculation in power injection space. The method identifies coherent generation groups by the developed K-medoids algorithm, taking a similarity matrix derived from the reachability Grammian as the index. As an experimental result, reachability Grammian matrices under local injections are approximately invariant. It indicates that the generator coherency identifications are nearly consistent for different injections. Then instability separation modes can be predicted at the normal operating point, while average initial acceleration is considered as the measure of the critical generator group to amend the error. Moreover, based on these predicted instability separation modes, a critical point search strategy for DSR calculation is illustrated in the reduced injection space of the critical generators. The proposed method was evaluated using New England Test System, and the computation accuracy and speed in determining the practical DSR were improved.

Energy Analysis of a Counter-Flow Plate Heat Exchanger Working in Stationary Mode and Using Geothermal Energy for Drying

This paper presents an energy analysis of a counter-flow plate heat exchanger operating in stationary mode. The exchanger comprises a rectangular plate of which we vary the heat transfer surface (by fixing its width and varying its length) and analyze the evolution of some parameters as a function of this heat transfer surface. The parameters to be analyzed are the NTU (number of transfer units), the effectiveness, the temperatures of both primary and secondary fluids and the heat flux. The analysis carried out will help understand the behavior of the counter-flow plate heat exchanger operating in stationary mode. Then, the heat transfer surface of the exchanger is determined for the sizing of a counter-flow plate heat exchanger intended to produce hot air for drying. That plate heat exchanger uses water vapor heated by geothermal energy as a primary fluid and atmospheric air as a secondary fluid. The products to be dried are onions with a mass flow of water to be evacuated of 100 kg/h.