Development and Application of a Power Law Constitutive Model for Eddy Current Dampers

Eddy current dampers (ECDs) have emerged as highly desirable solutions for vibration control due to theirexceptional damping performance and durability. However, the existing constitutive models present challenges tothe widespread implementation of ECD technology, and there is limited availability of finite element analysis (FEA)software capable of accurately modeling the behavior of ECDs. This study addresses these issues by developing anewconstitutivemodel that is both easily understandable and user-friendly for FEAsoftware. By utilizing numericalresults obtained from electromagnetic FEA, a novel power law constitutive model is proposed to capture thenonlinear behavior of ECDs. The effectiveness of the power law constitutive model is validated throughmechanicalproperty tests and numerical seismic analysis. Furthermore, a detailed description of the application process ofthe power law constitutive model in ANSYS FEA software is provided. To facilitate the preliminary design ofECDs, an analytical derivation of energy dissipation and parameter optimization for ECDs under harmonicmotionis performed. The results demonstrate that the power law constitutive model serves as a viable alternative forconducting dynamic analysis using FEA and optimizing parameters for ECDs.

Fluid-chemical modeling of the near-cathode sheath formation process in a high current broken in DC air circuit breaker

When the contacts of a medium-voltage DC air circuit breaker(DCCB) are separated, the energy distribution of the arc is determined by the formation process of the near-electrode sheath. Therefore, the voltage drop through the near-electrode sheath is an important means to build up the arc voltage, which directly determines the current-limiting performance of the DCCB. A numerical model to describe the near-electrode sheath formation process can provide insight into the physical mechanism of the arc formation, and thus provide a method for arc energy regulation. In this work, we establish a two-dimensional axisymmetric time-varying model of a medium-voltage DCCB arc when interrupted by high current based on a fluid-chemical model involving 16 kinds of species and 46 collision reactions. The transient distributions of electron number density, positive and negative ion number density, net space charge density, axial electric field, axial potential between electrodes, and near-cathode sheath are obtained from the numerical model. The computational results show that the electron density in the arc column increases, then decreases, and then stabilizes during the near-cathode sheath formation process, and the arc column's diameter gradually becomes wider. The 11.14 V–12.33 V drops along the17 μm space charge layer away from the cathode(65.5 k V/m–72.5 k V/m) when the current varies from 20 k A–80 k A.The homogeneous external magnetic field has little effect on the distribution of particles in the near-cathode sheath core,but the electron number density at the near-cathode sheath periphery can increase as the magnetic field increases and the homogeneous external magnetic field will lead to arc diffusion. The validity of the numerical model can be proven by comparison with the experiment.

Physico−mathematical model of the voltage−current characteristics of light-emitting diodes with quantum wells based on the Sah−Noyce−Shockley recombination mechanism

Herein,a physical and mathematical model of the voltage−current characteristics of a p−n heterostructure with quantum wells(QWs)is prepared using the Sah−Noyce−Shockley(SNS)recombination mechanism to show the SNS recombination rate of the correction function of the distribution of QWs in the space charge region of diode configuration.A comparison of the model voltage−current characteristics(VCCs)with the experimental ones reveals their adequacy.The technological parameters of the structure of the VCC model are determined experimentally using a nondestructive capacitive approach for determining the impurity distribution profile in the active region of the diode structure with a profile depth resolution of up to 10Å.The correction function in the expression of the recombination rate shows the possibility of determining the derivative of the VCCs of structures with QWs with a nonideality factor of up to 4.

Thermal analytic model of current gain for bipolar junction transistor-bipolar static induction transistor compound device

This paper proposes a thermal analytical model of current gain for bipolar junction transistor-bipolar static induction transistor （BJT-BSIT） compound device in the low current operation. It also proposes a best thermal compensating factor to the compound device that indicates the relationship between the thermal variation rate of current gain and device structure. This is important for the design of compound device to be optimized. Finally, the analytical model is found to be in good agreement with numerical simulation and experimental results. The test results demonstrate that thermal variation rate of current gain is below 10% in 25 ℃-85 ℃ and 20% in -55 ℃-25 ℃.

Non-hydrostatic modelling of regular wave transformation and current circulation in an idealized reef-lagoon-channel system

The wave-induced setup and circulation in a two dimensional horizontal(2DH)reef-lagoon-channel system is investigated by a non-hydrostatic model.The simulated results agree well with observations from the laboratory experiments,revealing that the model is valid in simulating wave transformation and currents over reefs.The effects of incident wave height,period,and reef flat water depth on the mean sea level and wave-driven currents are examined.Results show that the distributions of mean sea level and current velocities on the reef flat adjacent to the channel vary significantly from those in the area close to the side walls.From the wave averaged current field,an obvious alongshore flux flowing from the reef flat to the channel is captured.The flux from the reef flat composes the second source of the offshore rip current,while the first source is from the lagoon.A detailed momentum balance analysis shows that the alongshore current is mainly induced by the pressure gradient between the reef flat and the channel.In the lagoon,the momentum balances are between the pressure and radiation stress gradient,which drives flow towards the channel.Along the channel,the offshore current is mainly driven by the pressure gradient.

Numerical modeling of tidal current of LNG terminal in Caofeidian,Bohai Sea

In order to reasonably simulate tidal currents around small structures such as piles in a large-scale model domain, a 2-D hydrodynamic integrated model for Bohai Sea is established with the finite element method. The grid can be discretionarily refined as a non-structure triangle or quadrilateral so that piers can be treated as one or several impermeable elements with an area of 20 to 30 km^2 in a model domain over 85 700 km^2. The computational results of tidal levels and horizontal velocities are in good agreement with the field data. Based on the computed results by the model, the layout of an open 105 DWT liquefied natural gas （LNG）terminal in Caofeidian, Bohal Sea is effectively and reasonably optimized. It can be concluded that the model is suitable and reasonable for direct simulation of tidal currents around small structures in projects.

Nonlinear Auto-Companding Method for Behavioral Modeling of Switched-Current Circuits

A wavelet collocation method with nonlinear auto companding is proposed for behavioral modeling of switched current circuits.The companding function is automatically constructed according to the initial error distribution obtained through approximating the input output function of the SI circuit by conventional wavelet collocation method.In practical applications,the proposed method is a general purpose approach,by which both the small signal effect and the large signal effect are modeled in a unified formulation to ease the process of modeling and simulation.Compared with the published modeling approaches,the proposed nonlinear auto companding method works more efficiently not only in controlling the error distribution but also in reducing the modeling errors.To demonstrate the promising features of the proposed method,several SI circuits are employed as examples to be modeled and simulated.

Modeling of Gate Tunneling Current for Nanoscale MOSFETs with High-k Gate Stacks

A quantum model based on solutions to the Schrodinger-Poisson equations is developed to investigate the device behavior related togate tunneling current for nanoscale MOSFETs with high-k gate stacks. This model can model various MOS device structures with combinations of high-k dielectric materials and multilayer gate stacks,revealing quantum effects on the device performance. Comparisons are made for gate current behavior between nMOSFET and pMOSFET high- k gate stack structures. The results presented are consistent with experimental data, whereas a new finding for an optimum nitrogen content in HfSiON gate dielectric requires further experimental verifications.

Discrete element modeling of migration and evolution rules of coarse aggregates in the static compaction process

To investigate migration and evolution rules of coarse aggregates in the static compaction process, an algorithm of generating digital coarse aggregates that can reflect real morphology（ such as shape, size and fracture surface） of aggregate particles, is represented by polyhedral particles based on the discrete element method（ DEM）. A digital specimen comprised of aggregates and air voids is developed. In addition,a static compaction model consisting of a digital specimen and three plates is constructed and a series of evaluation indices such as mean contact force σMCF, wall stress in direction of zcoordinate σWSZZ, porosity and coordination numbers are presented to investigate the motion rules of coarse aggregates at different compaction displacements of 7. 5, 15 and 30 mm. The three-dimensional static compaction model is also verified with laboratory measurements. The results indicate that the compaction displacements are positively related to σMCF and σWSZZ, which increase gradually with the increase in iterative steps. When the compaction proceeds, the digital specimen porosity decreases, but the coordination number increases. The variation ranges of these four indices are different at different compaction displacements. This study provides a method to analyze the compaction mechanism of particle materials such as asphalt mixture and graded broken stone.

A 2D Mathematical Model for Sediment Transport by Waves and Tidal Currents

In this study, the combined actions of waves and tidal currents in estuarine and coastal areas are considered and a 2D mathematical model for sediment transport by waves and tidal currents has been established in orthogonal curvilinear coordinates. Non-equilibrium transport equations of suspended load and bed load are used in the model. The concept of background concentration is introduced, and the formula of sediment transport capacity of tidal currents for the Oujiang River estuary is obtained. The Dou Guoren formula is employed for the sediment transport capacity of waves. Sediment transport capacity in the form of mud and the intensity of back silting are calculated by use of Luo Zaosen＇ s formula. The calculated tidal stages are in good agreement with the field data, and the calculated velocities and flow directions of 46 vertical lines for 8 cross sections are also in good agreement with the measured data. On such a basis, simulations of back silting after excavation of the waterway with a sand bar under complicated boundary conditions in the navigation channel induced by suspended load, bed load and mud by waves and tidal currents are discussed.

Experimental primates and non-human primate(NHP) models of human diseases in China: current status and progress

Non-human primates （NHPs） are phylogenetically close to humans, with many similarities in terms of physiology, anatomy, immunology, as well as neurology, all of which make them excellent experimental models for biomedical research. Compared with developed countries in America and Europe, China has relatively rich primate resources and has continually aimed to develop NHPs resources. Currently, China is a leading producer and a major supplier of NHPs on the international market. However, there are some deficiencies in feeding and management that have hampered China＇s growth in NHP research and materials. Nonetheless, China has recently established a number of primate animal models for human diseases and achieved marked scientific progress on infectious diseases, cardiovascular diseases, endocrine diseases, reproductive diseases, neurological diseases, and ophthalmic diseases, etc. Advances in these fields via NHP models will undoubtedly further promote the development of China＇s life sciences and pharmaceutical industry, and enhance China＇s position as a leader in NHP research. This review covers the current status of NHPs in China and other areas, highlighting the latest developments in disease models using NHPs, as well as outlining basic problems and proposing effective to better utilize NHP resources and further foster NHP research in China.

NUMERICAL MODELLING OF THREE-DIMENSION CHARACTERISTICS OF WIND-DRIVEN CURRENT IN THE BOHAI SEA

Three- dimension (3-D) wind-driven currents in the Bohai Sea in both winter and summer are calculated by using a 3- D barotropic steady model, and the results are consistent with observed flow char -acteristics. Based on the results, 3- D characteristics of flow, currents at different depths, compensated flow in the lower layer , long and narrow alongshore current, the area of upwelling and downwelling, main circulation in vertical profile, and the current in Bohai Strait are discussed.

Two-Dimensional Mathematical Model of Tidal Current and Sediment for Oujiang Estuary and Wenzhou Bay

A 2-D mathematical model of tidal current and sediment has been developed for the Oujiang Estuary and the Wenzhou Bay. This model accomodates complicated features including multiple islands, existence of turbidity, and significant differ-ence in size distribution of bed material. The governing equations for non-uniform suspended load and bed load transport are presented in a boundary-fitted orthogonal curvilinear coordinate system. The numerical solution procedures along with their initial conditions, boundary conditions, and movable boundary technique are presented. Strategies for computation of the critical condition of deposition or erosion, sediment transport capacity, non-uniform bed load discharge, etc. are suggested. The model verification computation shows that, the tidal levels computed from the model are in good agreement with the field data at the 18 tidal gauge stations. The computed velocities and flow directions also agree well with the values measured along the totally 52 synchronously observed verticals distributed over 8 cross sections. The coraputed tidal water throughputs through the Huangda'ao cross section are close to the measured data. And the computed values of bed deformation from Yangfushan to the estuary outfall and in the outer-sea area are in good agreement with the data observed from 1986 to 1992. The changes of tidal volumes through the estuary, velocities in different channels and the bed form due to the influence of the reclamation project on the Wenzhou shoal are predicted by means of this model.

MATHEMATICAL MODEL FOR CONTINUOUS DETECTION OF CURRENT EFFICIENCY IN ALUMINUM PRODUCTION

ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅｍａｔｈｅｍａｔｉｃａｌｍｏｄｅｌｓｆｏｒｃａｌｃｕｌａｔｉｏｎｏｆｃｕｒｅｎｔｅｆｉｃｉｅｎｃｙｉｎａｌｕｍｉｎａｒｅｄｕｃｔｉｏｎｈａｖｅｂｅｎｒｅｐｏｒｔｅｄｂｙｍａｎｙｉｎｖｅｓｔｉｇａｔｏｒｓ，ｍｏｓｔｏｆｗｈ...

Adaptive Maneuvering Frequency Method of Current Statistical Model

Current statistical model(CSM) has a good performance in maneuvering target tracking. However, the fixed maneuvering frequency will deteriorate the tracking results, such as a serious dynamic delay, a slowly converging speedy and a limited precision when using Kalman filter(KF) algorithm. In this study, a new current statistical model and a new Kalman filter are proposed to improve the performance of maneuvering target tracking. The new model which employs innovation dominated subjection function to adaptively adjust maneuvering frequency has a better performance in step maneuvering target tracking, while a fluctuant phenomenon appears. As far as this problem is concerned, a new adaptive fading Kalman filter is proposed as well. In the new Kalman filter, the prediction values are amended in time by setting judgment and amendment rules,so that tracking precision and fluctuant phenomenon of the new current statistical model are improved. The results of simulation indicate the effectiveness of the new algorithm and the practical guiding significance.

Modeling assessment of tidal current energy in the Qiongzhou Strait, China

In the present study, an existing three-dimensional finite volume computational ocean model （FVCOM） was refined and configured including an algorithm for computing the power density and mean power density at Qiongzhou Strait of China. The refined model was validated with the measured tidal levels and tidal currents at different gauging stations. The model results are in reasonable agreement with the measured data. Based on the modeling results, we assess the resource of the tidal stream energy in the Qiongzhou Strait and discuss the temporal and the spatial distribution of the tidal current energy there. The conclusion is extracted： the higher power density occurs in the middle area of the strait, and lower at both sides. Characteristics of power density such as the maximum possibility speed, maximum power density during the spring tide period and the neap tide period, have the similar distribution. The southeast part and central area of the strait are of rich tidal current energy, where the maximum possibility speed can reach to 4.6 m/s, and the maximum power density of the spring tide period and the neap tide period can reach 5 996 and 467 W/mz separately in the surface layer The annual mean power density can reach 819 W/m2. Statistical length of accumulative time of the velocity exceeding 0.7 m/s is about 4 717 h at local point during a year. The total theoretical tidal current energy resource is approximately 189.55 MW and the available exploited energy on present technology condition is 249, 20.2 and 263 GW/a separately by using the methods FLUX, FARM and GC in the Qiongzhou Strait.

Hierarchical interacting multiple model algorithm based on improved current model

Interacting multiple models is the hotspot in the research of maneuvering target models at present. A hierarchical idea is introduced into IMM algorithm. The method is that the whole models are organized as two levels to co-work, and each cell model is an improved ＂current＂ statistical model. In the improved model, a kind of nonlinear fuzzy membership function is presented to get over the limitation of original model, which can not track weak maneuvering target precisely. At last, simulation experiments prove the efficient of the novel algorithm compared to interacting multiple model and hierarchical interacting multiple model based original ＂current＂ statistical model in tracking precision.

Current Model Analysis of South China Sea Based on Empirical Orthogonal Function(EOF) Decomposition and Prototype Monitoring Data

Environmental load is the primary factor in the design of offshore engineering structures and ocean current is the principal environmental load that causes underwater structural failure. In computational analysis, the calculation of current load is mainly based on the current profile. The current profile model, which is based on a structural failure criterion, is conducive to decreasing the uncertainty of the current load. In this study, we used prototype monitoring data and the empirical orthogonal function(EOF) method to investigate the current profile in the South China Sea and its correlation with the design of underwater structural strength and the dynamic design of fatigue. The underwater structural strength design takes into account the size of the structure and the service water depth. We propose profiles for the overall and local designs using the inverse first-order reliability method(IFORM). We extracted the characteristic profile current(CPC) of the monitored sea area to solve dynamic design problems such as vortex-induced vibration(VIV). We used random sampling to verify the feasibility of using the EOF method to calculate the CPC from the current data and identified the main problems associated with using the CPC, which deserve close attention in VIV design. Our research conclusions provide direct references for determining current load in this sea area. This analysis method can also be used in the analysis of other sea areas or field variables.

A CAD oriented quasi-analytical large-signal drain current model for 4H-SiC MESFETs

This paper reports that a 4H-SiC MESFET （Metal Semiconductor Field Effect Transistor） large signal drain current model based on physical expressions has been developed to be used in CAD tools. The form of drain current model is based on semi-empirical MESFET model, and all parameters in this model are determined by physical parameters of 4H-SiC MESFET. The verification of the present model embedded in CAD tools is made, which shows a good agreement with measured data of large signal DC I-V characteristics, PAE （power added efficiency）, output power and gain.

Cardiac magnetic source imaging based on current multipole model

It is widely accepted that the heart current source can be reduced into a current multipole. By adopting three linear inverse methods, the cardiac magnetic imaging is achieved in this article based on the current multipole model expanded to the first order terms. This magnetic imaging is realized in a reconstruction plane in the centre of human heart, where the current dipole array is employed to represent realistic cardiac current distribution. The current multipole as testing source generates magnetic fields in the measuring plane, serving as inputs of cardiac magnetic inverse problem. In the heart-torso model constructed by boundary element method, the current multipole magnetic field distribution is compared with that in the homogeneous infinite space, and also with the single current dipole magnetic field distribution. Then the minimum-norm least-squares （MNLS） method, the optimal weighted pseudoinverse method （OWPIM）, and the optimal constrained linear inverse method （OCLIM） are selected as the algorithms for inverse computation based on current multipole model innovatively, and the imaging effects of these three inverse methods are compared. Besides, two reconstructing parameters, residual and mean residual, are also discussed, and their trends under MNLS, OWPIM and OCLIM each as a function of SNR are obtained and compared.