Distribution and Formation Causes of PM_(2.5) and O_(3) Double High Pollution Events in China during 2013–20

Fine particulate matter(PM_(2.5))and ozone(O_(3))double high pollution(DHP)events have occurred frequently over China in recent years,but their causes are not completely clear.In this study,the spatiotemporal distribution of DHP events in China during 2013–20 is analyzed.The synoptic types affecting DHP events are identified with the Lamb–Jenkinson circulation classification method.The meteorological and chemical causes of DHP events controlled by the main synoptic types are further investigated.Results show that DHP events(1655 in total for China during 2013–20)mainly occur over the North China Plain,Yangtze River Delta,Pearl River Delta,Sichuan Basin,and Central China.The occurrence frequency increases by 5.1%during 2013–15,and then decreases by 56.1%during 2015–20.The main circulation types of DHP events are“cyclone”and“anticyclone”,accounting for over 40%of all DHP events over five main polluted regions in China,followed by southerly or easterly flat airflow types,like“southeast”,“southwest”,and“east”.Compared with non-DHP events,DHP events are characterized by static or weak wind,high temperature(20.9℃ versus 23.1℃)and low humidity(70.0%versus 64.9%).The diurnal cycles of meteorological conditions cause PM_(2.5)(0300–1200 LST,Local Standard Time=UTC+8 hours)and O_(3)(1500–2100 LST)to exceed the national standards at different periods of the DHP day.Three pollutant conversion indices further indicate the rapid secondary conversions during DHP events,and thus the concentrations of NO_(2),SO_(2) and volatile organic compounds decrease by 13.1%,4.7%and 4.4%,respectively.The results of this study can be informative for future decisions on the management of DHP events.

Cascading Delays for the High-Speed Rail Network Under Different Emergencies:A Double Layer Network Approach

High-speed rail(HSR) has formed a networked operational scale in China. Any internal or external disturbance may deviate trains’ operation from the planned schedules, resulting in primary delays or even cascading delays on a network scale. Studying the delay propagation mechanism could help to improve the timetable resilience in the planning stage and realize cooperative rescheduling for dispatchers. To quickly and effectively predict the spatial-temporal range of cascading delays, this paper proposes a max-plus algebra based delay propagation model considering trains’ operation strategy and the systems’ constraints. A double-layer network based breadth-first search algorithm based on the constraint network and the timetable network is further proposed to solve the delay propagation process for different kinds of emergencies. The proposed model could deal with the delay propagation problem when emergencies occur in sections or stations and is suitable for static emergencies and dynamic emergencies. Case studies show that the proposed algorithm can significantly improve the computational efficiency of the large-scale HSR network. Moreover, the real operational data of China HSR is adopted to verify the proposed model, and the results show that the cascading delays can be timely and accurately inferred, and the delay propagation characteristics under three kinds of emergencies are unfolded.

Numerical simulation and control of welding distortion for double floor structure of high speed train

The welding heat source models and the plastic tension zone sizes of a typical weld joint involved in the double floor structure of high speed train under different welding parameters were calculated by a thermal-elastic-plastic FEM analysis based on SYSWELD code.Then,the welding distortion of floor structure was predicted using a linear elastic FEM and shrinkage method based on Weld Planner software.The effects of welding sequence,clamping configuration and reverse deformation on welding distortion of floor structure were examined numerically.The results indicate that the established elastic FEM model for floor structure is reliable for predicting the distribution of welding distortion in view of the good agreement between the calculated results and the measured distortion for real double floor structure.Compared with the welding sequence,the clamping configuration and the reverse deformation have a significant influence on the welding distortion of floor structure.In the case of30 mm reverse deformation,the maximum deformation can be reduced about 70%in comparison to an actual welding process.

A Double Network Hydrogel with High Mechanical Strength and Shape Memory Properties

Double network(DN)hydrogels as one kind of tough gels have attracted extensive at-tention for their potential applications in biomedical and load-bearing fields.Herein,we import more functions like shape memory into the conventional tough DN hydro-gel system.We synthesize the PEG-PDAC/P(AAm-co-AAc)DN hydrogels,of which the first network is a well-defined PEG(polyethylene glycol)network loaded with PDAC(poly(acryloyloxyethyltrimethyl ammonium chloride))strands,while the second network is formed by copolymerizing AAm(acrylamide)with AAc(acrylic acid)and cross-linker MBAA(N;N′-methylenebisacrylamide).The PEG-PDAC/P(AAm-co-AAc)DN gels exhibits high mechanical strength.The fracture stress and toughness of the DN gels reach up to 0.9 MPa and 3.8 MJ/m^3,respectively.Compared with the conventional double network hydrogels with neutral polymers as the soft and ductile second network,the PEG-PDAC/P(AAm-co-AAc)DN hydrogels use P(AAm-co-AAc),a weak polyelectrolyte,as the second network.The AAc units serve as the coordination points with Fe^3+ions and physically crosslink the second network,which realizes the shape memory property activated by the reducing ability of ascorbic acid.Our results indicate that the high mechanical strength and shape memory properties,probably the two most important characters related to the potential application of the hydrogels,can be introduced simultaneously into the DN hydrogels if the functional monomer has been integrated into the network of DN hydrogels smartly.

Double North Pacific High in Summer

An example of sea level pressure (SLP) and sea surface temperature (SST) is displayed for a summer month based on historical monthly mean data for the North Pacific. A double North Pacific High (NPH) co-occurred with a double large-scale SST maximum along 40 N. Centers of the two NPHs had very nearly the same longitudes as did the SST maxima. Seven similar coincidences happened within the 30-year records. These particular associations between extrema of SLPs and SSTs enhance a previously published conjecture that single and double NPHs are caused by heat transfer from the sea surface to the atmosphere. The eastern SST maximum is the signature of a permanent wide warm surface current flowing northeast off California. To the west of it in the summer is a transient wide warm surge of surface water flowing north as it crosses mid-latitudes. These are the heat sources that generate the single and double NPHs.

Enhancement of Breakdown Voltage in AlGaN/GaN High Electron Mobility Transistors Using Double Buried p-Type Layers

A novel A1GaN/GaN high electron mobility transistor （HEMT） with double buried p-type layers （DBPLs） in the GaN buffer layer and its mechanism are studied. The DBPL A1GaN/GaN HEMT is characterized by two equi-long p-type GaN layers which are buried in the GaN buffer layer under the source side. Under the condition of high-voltage blocking state, two reverse p-n junctions introduced by the buried p-type layers will effectively modulate the surface and bulk electric fields. Meanwhile, the buffer leakage is well suppressed in this structure and both lead to a high breakdown voltage. The simulations show that the breakdown voltage of the DBPL structure can reach above 2000 V from 467 V of the conventional structure with the same gate-drain length of 8μm.

High-Performance Aqueous Zinc–Manganese Battery with Reversible Mn^(2+)/Mn^(4+) Double Redox Achieved by Carbon Coated MnO_x Nanoparticles

There is an urgent need for low-cost,high-energy-density,environmentally friendly energy storage devices to fulfill the rapidly increasing need for electrical energy storage.Multi-electron redox is considerably crucial for the development of high-energy-density cathodes.Here we present highperformance aqueous zinc-manganese batteries with reversible Mn2+/Mn4+ double redox.The active Mn4+is generated in situ from the Mn2+-containing MnOx nanoparticles and electrolyte.Benefitting from the low crystallinity of the birnessite-type MnO2 as well as the electrolyte with Mn2+additive,the MnOX cathode achieves an ultrahigh energy density with a peak of845.1 Wh kg-1 and an ultralong lifespan of 1500 cycles.The combination of electrochemical measurements and material characterization reveals the reversible Mn2+/Mn4+double redox(birnessite-type MnO2? monoclinic MnOOH and spinel ZnMn2O4 H?Mn2+ions).The reversible Mn2+/Mn4+double redox electrode reaction mechanism offers new opportunities for the design of low-cost,high-energy-density cathodes for advanced rechargeable aqueous batteries.

Teaching Reform and Research on Art Design Majors in Higher Vocational Colleges under the Background of “Double High Plan”

Training talents for the society is the responsibility of colleges and universities.The society needs applied and innovative art design majors.In order to cultivate talents needed by society and keep up with the development plan of the Ministry of Education,higher vocational colleges need to reform.This paper adopts the method of theoretical analysis to elaborate from the four aspects of focusing equally on science and education,promote learning by competition;integrating industry and education,nurturing talents together;keeping the mission in mind while serving students;and finding the right positioning,giving full play to the advantages.

High-pressure synthesis, characterization, and equation of state of double perovskite Sr_2CoFeO_6

Double perovskite oxide Sr2 Co Fe O6（SCFO） has been obtained using a high-pressure and high-temperature（HPHT）synthesis method. Valence states of Fe and Co and their distributions in SCFO were examined with X-ray photoelectron spectroscopy. The electric transport behavior of SCFO showed a semiconductor behavior that can be well described by Mott＇s law for variable-range hopping conduction. The structural stability of SCFO was investigated at pressures up to 31 GPa with no pressure-induced phase transition found. Bulk modulus B0 was determined to be 163（2） GPa by fitting the pressure–volume data to the Birch–Murnaghan equation of state.

Plant Ideotype at Heading for Super High-Yielding Rice in Double-Cropping System in South China

The newly released super high-yielding hybrid rice combinations, Yueza 122, Fengyou 428, Peiza 67, and the super high-yielding conventional cultivars, Guangchao 3 and Shengtai 1, were grown in both early and late seasons. The morphological characters of each population were investigated at the heading stage, and the data were analyzed by using ANOVY and other statistic methods. The plant ideal morphological characters at the heading stage were established as follows： 1 ） for the early-season cropping, 90-105 cm plant height; 11-12 tillers per plant; 35-40 em length and 2.1-2.2 cm width of flag leaf; 46-50 cm length and 1.8-2.1 cm width of the second leaf from the top （L2）; 59-64 cm length and 1.4-1.9 cm width of the third leaf from the top （L3）; 7°-14°, 18° and 200-33° for the ideal leaf angles of the flag leaf, L2 and L3, respectively; 2） for the late-season cropping, 90-100 cm plant height; 9-15 tillers per plant; 30-41 cm length and 1.8-2.0 cm width of flag leaf; 53-61 cm length and 1.3-1.8 cm width of L2; 52-58 cm length and 1.2-1.5 cm width of L3; 9°-19°, 15°-37° and 16°-49° for the ideal leaf angles of the flag leaf, L2 and L3, respectively. The main physiological characteristics of these varieties were also analyzed.

Development of Strategic Industrial Clusters in Guangdong Higher Vocational Colleges based on the"Double High Plan"

This article analyzed the ten strategic pillar industry clusters and the ten strategic emerging industry clusters which were confirmed and announced by Guangdong Province in May 2020 in addition to the 14 professional groups of schools in Guangdong Province which were shortlisted in the"Double High Plan."With comparison and analysis,the degree of coincidence between the professional groups of higher vocational colleges and strategic industrial clusters in Guangdong Province which covered most of the industrial clusters was relatively high.The higher vocational colleges that were shortlisted in the"Double High Plan"still required dynamic adjustments in the construction of professional groups to achieve an allrounded integration of the supply of talents and industrial demands.

Extreme Light Concentration and High Absorption of the Double Cylindrical Microcavities

We numerically study the enhancement factor of energy density and absorption efficiency inside the double cylindrical microcavities based on a triple-band metamaterial absorber. The compact single unit cell consists of concentric gold rings with a gold disk in the center and a metallic ground plane separated by a dielectric layer. We demonstrate that the multilayer structure with subwavelength electromagnetic confinement allows 104-105-fold enhancement of the electromagnetic energy density inside the double cavities and contains the most energy of the incoming light. Particularly, the enhancement factor of energy density G shows strong ability of localizing light and some regularity as the change of the thickness of the dielectric slab and dielectric constant. At the normal incidence of electromagnetic radiation, the obtained reflection spectra show that the resonance frequencies of the double microcavities operate in the range of 10-30μm. We also calculate the absorption efficiency C, which can reach 95%, 97% and 95% at corresponding frequency by optimizing the structure＇s geometry parameters. Moreover, the proposed structure will be insensitive to the polarization of the incident wave due to the symmetry of the double cylindrical microcavities. The proposed optical metamaterial is a promising candidate as absorbing elements in scientific and technical applications due to its extreme confinement, multiband absorption and polarization insensitivity.

Numerical simulation for 2D double-diffusive convection(DDC) in rectangular enclosures based on a high resolution upwind compact streamfunction model Ⅰ: numerical method and code validation

A high resolution upwind compact streamfunction numerical algorithm for two-dimensional(2D)double-diffusive convection(DDC)is developed.The unsteady Navier-Stokes(N-S)equations in the streamfunction-velocity form and the scalar temperature and concentration equations are used.An optimized third-order upwind compact(UCD3 opt)scheme with a low dispersion error for the first derivatives is utilized to approximate the third derivatives of the streamfunction in the advection terms of the N-S equations and the first derivatives in the advection terms of the scalar temperature and concentration equations.The remaining first derivatives of the streamfunction(velocity),temperature,and concentration variables used in the governing equations are discretized by the fourth-order compact Pade(SCD4)schemes.With the temperature and concentration variables and their approximate values of the first derivatives obtained by the SCD4 schemes,the explicit fourth-order compact schemes are suggested to approximate the second derivatives of temperature and concentration in the diffusion terms of the energy and concentration equations.The discretization of the temporal term is executed with the second-order Crank-Nicolson(C-N)scheme.To assess the spatial behavior capability of the established numerical algorithm and verify the developed computer code,the DDC flow is numerically solved.The obtained results agree well with the benchmark solutions and some accurate results available in the literature,verifying the accuracy,effectiveness,and robustness of the provided algorithm.Finally,a preliminary application of the proposed method to the DDC is carried out.

LD Pumped High Efficient Intracavity Frequency-Doubled Green Laser

A laser diode (LD) pumped Q switched high efficient intracavity frequency doubled Nd ∶YAG laser is reported here. The authors have designed an optical coupler and pointed out that the key to increasing harmonic conversion efficiency is to decrease the loss of fundamental wave. In the experiments, a fundamental mode output laser was acquired. When the pumping power was 12 W, 2.6 W average output power at 1 064 nm with AO Q switch was obtained. 2.1 W average output power at 532 nm was obtained with intracavity frequency doubling, and the highest second harmonic conversion efficiency was 82 0 0.

Treatable focal region modulated by double excitation signal superimposition to realize platform temperature distribution during transcranial brain tumor therapy with high-intensity focused ultrasound

Recently, the phase compensation technique has allowed the ultrasound to propagate through the skull and focus into the brain. However, the temperature evolution during treatment is hard to control to achieve effective treatment and avoid over-high temperature. Proposed in this paper is a method to modulate the temperature distribution in the focal region. It superimposes two signals which focus on two preset different targets with a certain distance. Then the temperature distribution is modulated by changing triggering time delay and amplitudes of the two signals. The simulation model is established based on an 82-element transducer and computed tomography （CT） data of a volunteer＇s head. A finite- difference time-domain （FDTD） method is used to calculate the temperature distributions. The results show that when the distances between the two targets respectively are 7.5-12.5 mm on the acoustic axis and 2.0-3.0 mm in the direction perpendicular to the acoustic axis, a focal region with a uniform temperature distribution （64-65 ℃） can be created. Moreover, the volume of the focal region formed by one irradiation can be adjusted （26.8-266.7 mm3） along with the uniform temperature distribution. This method may ensure the safety and efficacy of HIFU brain tumor therapy.

DOUBLE HIGH ORDER S－BREAKING BIFURCATION POINTS AND THEIR NUMERICAL DETERMINATION

We consider double high order S-breaking bifurcation points of two-Parameter dependent nonlinear problems with Z_2×Z_2-symmetry. Because of the underlying symmetry we could propose some regular extended systems to determine double high order S-breaking bifurcation points. and we could also show that there exist two quadratic pitchfork bifurcation point paths passing through the point being considered.

High efficiency spreading spectrum modulation using double orthogonal complex sequences

This paper presents a novel scheme of high efficiency spreading spectrum modulation using double orthogonal complex sequences （DoCS）. In this scheme, input data bit-stream is split into many groups with length M. Each group is then mapped into a word of width M and then utihzed to select one sequence from 2u-2 DoCS sequences each with length L. After that, the selected sequence is modulated on carrier in quadrature phase shift keying （QPSK） mode. In addition, a new method named forward phase correction （FPC） is put forward for carrier recovery. Theoretical analysis and bit-error-ratio（BER） experiment results indicate that the proposed scheme has better performance than the conventional direct sequence spread spectrum（DSSS） scheme both in bandwidth efficiency and processing gain of the receiver.

ASYMMETRIC SYNTHESIS Ⅻ:HIGHLY ENANTIOSELECTIVE SYNTHESIS OF α-AMINO ACIDS BY ALKYLATION OF THE KETIMINE FROM 2-HYDROXY-PINAN-3-ONE AND MENTHYL GLYCIN-ATE A DOUBLE ASYMMETRIC INDUCTION SYSTEM

A series of α-amino acids are obtained in 72-96% optical yields by alkylation of the ketimine derived from(+)-2-hydroxy-pinan-3-one and(-)-menthyl glycinate fol- lowed by hydrolysis of the alkylated intermediates with mineral acid.The double asymmetric induction are explained by the transition model of lithium enolate.

Research on Innovation of Modern Apprenticeship Talent Training Model for Art and Design Majors in Higher Vocational Education under the Background of "Double High"

In order to cultivate more excellent talents in art and design majors following the requirements of the"13th Five-Year Plan"national education development,this paper analyzes in-depth on the current status of higher vocational education in art design profession under the background of the"Double High"plan and the challenges faced,and proposes the building of school-enterprise"Double Subject"education system and the establishment of a"diversified"evaluation system.Deepening the integration of industry and education,schools and enterprises jointly explore modern apprenticeship talent training models for innovative art and design majors,and provide a strong guarantee for the implementation of the"Double High"plan modern apprenticeship talent training model.

Experimental study on the seismic behavior of high strength concrete fi lled double-tube columns

To study the seismic behavior of high strength concrete fi lled double-tube(CFDT) columns,each consisting of an external square steel tube and an internal circular steel tube,quasi-static tests on eight CFDT column specimens were conducted.The test variables included the width-to-thickness ratio(β1) and the area ratio(β2) of the square steel tube,the wall thickness of the circular steel tube,and the axial force(or the axial force ratio) applied to the CFDT columns.The test results indicate that for CFDT columns with a square steel tube with β1 of 50.1 and 24.5,local buckling of the specimen was found at a drift ratio of 1/150 and 1/50,respectively.The lateral force-displacement hysteretic loops of all specimens were plump and stable.Reducing the width-to-thickness ratio of the square steel tube,increasing its area ratio,or increasing the wall thickness of the internal circular steel tube,led to an increased fl exural strength and deformation capacity of the specimens.Increasing the design value of the axial force ratio from 0.8 to 1.0 may increase the fl exural strength of the specimens,while it may also decrease the ultimate deformation capacity of the specimen with β1 of 50.1.