Influence of pore structure heterogeneity on channeling channels during hot water flooding in heavy oil reservoir based on CT scanning

Hot water flooding is an effective way to develop heavy oil reservoirs.However,local channeling channels may form,possibly leading to a low thermal utilization efficiency and high water cut in the reservoir.The pore structure heterogeneity is an important factor in forming these channels.This study proposes a method that mixes quartz sand with different particle sizes to prepare weakly heterogeneous and strongly heterogeneous models through which hot water flooding experiments are conducted.During the experiments,computer tomography(CT)scanning identifies the pore structure and micro remaining oil saturation distribution to analyze the influence of the pore structure heterogeneity on the channeling channels.The oil saturation reduction and average pore size are divided into three levels to quantitatively describe the relationship between the channeling channel distribution and pore structure heterogeneity.The zone where oil saturation reduction exceeds 20%is defined as a channeling channel.The scanning area is divided into 180 equally sized zones based on the CT scanning images,and threedimensional(3D)distributions of the channeling channels are developed.Four micro remaining oil distribution patterns are proposed,and the morphology characteristics of micro remaining oil inside and outside the channeling channels are analyzed.The results show that hot water flooding is more balanced in the weakly heterogeneous model,and the oil saturation decreases by more than 20%in most zones without narrow channeling channels forming.In the strongly heterogeneous model,hot water flooding is unbalanced,and three narrow channeling channels of different lengths form.In the weakly heterogeneous model,the oil saturation reduction is greater in zones with larger pores.The distribution range of the average pore size is larger in the strongly heterogeneous model.The network remaining oil inside the channeling channels is less than outside the channeling channels,and the hot water converts the network remaining oil into cluster,film,and droplet remaining oil.

Health risk assessment of heavy metal pollution in groundwater of a karst basin,SW China

To investigate the presence of metal elements and assess their health risk for the populace in the Nandong Underground River Basin(NURB),we conducted an analysis of eleven common heavy metals in the water body.A Health risk assessment(HRA)model was employed to analyze 84 water samples from the NURB.The detection results revealed the following order of heavy metals concentrations:Fe>Al>Mn>Zn>As>Cd>Pb>Cr>Ni>Cu>Hg.Correlation analysis indicated a certain similarity in material source and migration transformation among these eleven metal elements.Our study identified that the health risks for local residents exposed to metal elements in the water of NURB primarily stem from carcinogenic risk(10^(−6)–10^(−4)a^(−1))through the drinking water pathway.Moreover,the health risk of heavy metal exposure for children through drinking water was notably higher than for adults.The maximum health risks of Cr in both underground and surface water exceeded the recommendation standard(5.0×10^(−5)a^(−1))from ICRP,surpassing the values recommended by the Swedish Environmental Protection Agency,the Dutch Ministry of Construction and Environment and the British Royal Society(5.0×10^(−6)a^(−1)).The results of the health risk assessment indicate that Cr in the water of NURB is the primary source of carcinogenic risk for local residents,followed by Cd and As.Consequently,it is imperative to control these three carcinogenic metals when the water was used as drinking water resource.

Heavy metal pollution of river water and eco-friendly remediation using potent microalgal species

Pollution of rivers is mainly caused by anthropogenic activities such as discharge of effluent from industrial facilities,maintenance of sewage/effluent treatment plants,and dumping of solid waste on river banks.This study dealt with the pollution issues of the Cooum River in the well-known city of Chennai in South India.Water samples from 27 locations were collected and analyzed for 12 elements,including Ba,B,and Al,as well as heavy metals such as Pb,Cr,Mn,Fe,Co,Ni,Cu,Zn,and Cd.The samples showed levels of these elements that exceeded World Health Organization recommendations.Pearson correlation analysis revealed the inter-dependency among elements,and the contribution of each element based on factor loadings showed its percentage contribution compared to others.Water samples from six significant locations were chosen for remediation with three algae:Chlorella vulgaris,Scenedesmus dimorphus,and Phormedium sp.The uptake of pollutants led to the continuous growth of algae during the incubation period of 15 d,effectively removing heavy metals from the river water.The increasing levels of algal counts and the chlorophyll a content confirmed the algal growth during the incubation period,followed by a declining stage after the incubation period.The scanning electron microscopic images of algae before and after the remediation showed no remarkable modification of morphological patterns.This study showed that the uptake of heavy metals using algae is an effective water pollution remediation measure,making the process practicable in the field on a large scale in the near future.

Use of oilseed crops biomass for heavy metal treatment in water

The treatment of heavy metals in water is of high importance worldwide,and different treatment types have been developed.The use of plant material is becoming more and more important,and oilseed crops biomass have been investigated in terms of phytoremediation and biosorption processes.This article is a review of the literature reporting the applications in 10 different plants and evaluating the removal efficiencies for 12 metals,including the findings of 81 publications.Moringa olifera and Helianthus annuus are the most studied plants,whereas Cu(21.9%),Cd(18.5%),and Pb(19.9%)are the most studied metals.As a result,it was found that more than 90%of Pb,Cu,Cd,Fe,Zn,Ni,Cr,Sr and Mn showed removals in their experiments.At the same time,the variables most related to the efficiency of metal removal are pH,temperature,and contact time.This article includes a review of the biosorption isotherms used in the different studies.

Nanoscale Zero-Valent Iron(nZVI)for Heavy Metal Wastewater Treatment:A Perspective

Industries such as non-ferrous metal smelting discharge billions of gallons of highly toxic heavy metal wastewater(HMW)worldwide annually,posing a severe challenge to conventional wastewater treatment plants and harming the environment.HMW is traditionally treated via chemical precipitation using lime,caustic,or sulfide,but the effluents do not meet the increasingly stringent discharge standards.This issue has spurred an increase in research and the development of innovative treatment technologies,among which those using nanoparticles receive particular interest.Among such initiatives,treatment using nanoscale zero-valent iron(nZVI)is one of the best developed.While nZVI is already well known for its site-remediation use,this perspective highlights its application in HMW treatment with metal recovery.We demonstrate several advantages of nZVI in this wastewater application,including its multifunctionality in sequestrating a wide array of metal(loid)s(>30 species);its capability to capture and enrich metal(loid)s at low concentrations(with a removal capacity reaching 500 mg·g^(-1)nZVI);and its operational convenience due to its unique hydrodynamics.All these advantages are attributable to nZVI’s diminutive nanoparticle size and/or its unique iron chemistry.We also present the first engineering practice of this application,which has treated millions of cubic meters of HMW and recovered tons of valuable metals(e.g.,Cu and Au).It is concluded that nZVI is a potent reagent for treating HMW and that nZVI technology provides an eco-solution to this toxic waste.

Agricultural Contamination of the Surface Waters of the Upper Ouémé in Benin: The Case of Heavy Metals and Pesticides

Objective: The main objective of this study was to assess the degree of contamination of surface waters by heavy metals and pesticides. Method: To this end, data were collected in December 2022 from four specific sampling stations: Okpara, Térou, Affon and Adjiro. Levels of heavy metals, including cadmium, chromium, copper, iron, mercury, nickel and lead, were measured and subjected to in-depth statistical analysis using graphical summation models. In addition, the concentrations of pesticide active ingredients present in the samples were interpreted and evaluated. The statistical data collected during this study were processed using R software, version 3.5.0. Results: The values obtained at the different stations Okpara, Térou, Affon and Adjiro are respectively Arsenic (2 × 10-4 mg/L;2.2 × 10-1 mg/L;1.2 × 10-4 mg/L;2 × 10-4 mg/L), Cadmium (4.4 × 10-5 mg/L;1.1 × 10-2 mg/L;10-4 mg/L;4 × 10-4 mg/L). Then Copper (7 × 10-4 mg/L;3 × 10-3 mg/L;7 × 10-4 mg/L;1 × 10-4 mg/L), Iron (1.51 mg/L;6.4 × 10-1 mg/L;2.0012 mg/L;2.9 × 10-1 mg/L), Lead (0 mg/L;0 mg/L;1.5 × 10-3 mg/L;1.5 × 10-3 mg/L). Mercury, nickel and chromium were not detected in surface waters. It is important to note that the values obtained for trace metals (Cadmium, Chromium, Copper, Iron, Mercury, nickel and chromium were not detected in surface waters. It is important to note that the values obtained for trace metals (cadmium, chromium, copper, iron, mercury, nickel and lead) were all below the guideline standards set by the WHO in 2006 for uncontaminated surface waters. This indicates that the surface waters of the Upper Ouémé were below acceptable contamination thresholds in terms of heavy metals. However, the presence of pesticide active ingredients such as cyfluthrin, endosulfan-alpha, endosulfan-beta, profenosfos, tihan, atrazine, gala super and glycel clearly indicates that these surface waters are subject to agricultural contamination.

Evaluation of Agricultural Contamination Level by Heavy Metals and Pesticides in Sediments of Rivers and Water Bodies for Shrimp Fishing in the Lower Ouémé: Case of the Aguigadji, Ahlan and Sele Stations in Benin

This study assessed sediment contamination by heavy metals and pesticide active ingredients linked to chemical inputs used in agricultural activities in the lower Ouémé. Pesticide residues from the organochlorine, pyrethroid and organophosphorus families were investigated by gas chromatography, and heavy metals (Cd, Pb, As, Ni, Zn, Fe, Mg, Cr and Hg) by atomic absorption spectrophotometry. The metallic pollution indices, the contamination factor (CF) and the ecological risk index were calculated. The results revealed 8 active ingredients in the rainy season and 9 in the dry season. Glyphosate was the active ingredient with the highest concentration at all stations, 9.65 ± 0.84 mg/kg recorded in the dry season at the Aguigadji station. All glyphosate values were above the EQS. DDT, Atrazine and Endosulfan also showed high concentrations in the dry and rainy seasons. Emamectin, Abamectin and Lambda Cyhalothrin also showed high concentrations in the dry season at Aguigadji, Ahlan and Sele. Only glyphosate was recorded at the control station (Toho), but in very low concentrations. Lead showed the highest concentrations at all the stations, 265.96 ± 21.02 mg/Kg in the rainy season and 255.38 ± 79.09 mg/Kg in the dry season, all detected at the Aguigadji station and above the EQS. Zn, Ni, Fe, Cu and Cr were all representative in both the dry and rainy seasons at the contaminated stations. Manganese showed high concentrations in the rainy season. Pb showed very high contamination (FC ≥ 6) at the Aguigadji and Ahlan stations and significant contamination (3 ≤ FC 6) at the Sele station in both the rainy and dry seasons. Ni, Hg and Cd, showed either moderate or significant contamination at the contaminated stations. The risk values showed a considerable ecological Ri (190 ≤ Ri < 380) in the rainy season and a moderate ecological Ri (95 ≤ Ri < 190) in the dry season at these contaminated stations.

Preliminary safety analysis for heavy water-moderated molten salt reactor

The heavy water-moderated molten salt reactor(HWMSR)is a newly proposed reactor concept,in which heavy water is adopted as the moderator and molten salt dissolved with fissile and fertile elements is used as the fuel.Issues arising from graphite in traditional molten salt reactors,including the positive temperature coefficient and management of highly radio-active spent graphite waste,can be addressed using the HWMSR.Until now,research on the HWMSR has been centered on the core design and nuclear fuel cycle to explore the viability of the HWMSR and its advantages in fuel utilization.However,the core safety of the HWMSR has not been extensively studied.Therefore,we evaluate typical accidents in a small modular HWMSR,including fuel salt inlet temperature overcooling and overheating accidents,fuel salt inlet flow rate decrease,heavy water inlet temperature overcooling accidents,and heavy water inlet mass flow rate decrease accidents,based on a neutronics and thermal-hydraulics coupled code.The results demonstrated that the core maintained safety during the investigated accidents.

Progress in the Treatment of Heavy Metal Pollution of Water Sediment

In recent years,as China's industrialization process and urban-rural integration strategy have continued to deepen,some industrial and domestic wastewater has been discharged directly into rivers without effective treatment.This has resulted in the continuous accumulation and enrichment of pollutants in water bodies.This phenomenon results in a significant accumulation of heavy metals in the sediment of water bodies,which not only represents a significant threat to the ecological environment but also ultimately poses a risk to human health.The objective of this study is to provide a comprehensive review of the current status of heavy metal pollution in water sediment in China.In addition,this paper analyzes the advantages and limitations of existing techniques for the harmless treatment of heavy metal pollution and forecasts the development direction of this field.

Quantitative Evaluation of Heavy Metal Pollution and Its Influencing Factors in Water Bodies of Karst Areas

At present, there is relatively little research on the synergistic effects of heavy metals in soil, sediment, and bedrock on heavy metal pollution in water bodies. In this paper, heavy metals in soil, sediment, bedrock, and water of a typical karst watershed in southwest China were investigated. The results indicated that the average values of heavy metals in soil and sediment were relatively higher than those in bedrock except for Ni and As. During the research period, As and Cd were the main heavy metal elements polluting the soil and sediment in the study area, while water bodies were mainly polluted by Ni, As, and Cd. The pollution assessment indicated that there were instances of poor or very poor water quality in the study area during the study period;the soil as a whole was slightly polluted by Cd and As;sediment was subject to moderate Cd pollution and mild As pollution. Analysis of geochemical form for heavy metals showed that heavy metals in soil and sediment were mainly in residual form, and the proportions of exchangeable As and Cd were relatively high. Multiple statistical analysis showed that heavy metals in sediment, soil, and bedrock explained 23.8%, 16.8%, and 16.2% of the changes in heavy metals of water, respectively. The research results can provide scientific basis for the prevention and control of heavy metal pollution in water bodies.

Harmful evaluation of heavy metals from soil layer to the groundwater: Take the Jilin Hunchun Basin as an example

The continuous enrichment of heavy metals in soils has caused potential harm to groundwater.Quantitative methods to evaluate the harm of heavy metals in soil to groundwater are lacked in previous studies.Based on the theory of groundwater circulation and solid-liquid equilibrium,a simple and easy-touse flux model of soil heavy metals migrating to groundwater is constructed.Based on groundwater environmental capacity,an innovative method for evaluating the harm of heavy metals in soil to groundwater is proposed,which has been applied in Hunchun Basin,Jilin Province,China.The results show that the fluxes of soil heavy metals into groundwater in the study area are Zn,Cu,As,Pb,Cd,Ni,and Hg in descending order.The content of heavy metals in groundwater(As,Hg,Cu,Pb,Zn,Ni,and Cd)in most areas has not risen to the threshold of environmental capacity within 10 years.The harm levels of soil heavy metals to groundwater in the most townships soils are at the moderate level or below.This evaluation method can quantify the flux of soil heavy metals into groundwater simply and quickly,determine the residual capacity of groundwater to heavy metals,evaluate the harm level of soil heavy metals to groundwater,provide support for relevant departments to carry out environmental protection of soil and groundwater,and provide a reference to carry out similar studies for related scholars.

Bimetallic Single‑Atom Catalysts for Water Splitting

Green hydrogen from water splitting has emerged as a critical energy vector with the potential to spearhead the global transition to a fossil fuel-independent society.The field of catalysis has been revolutionized by single-atom catalysts(SACs),which exhibit unique and intricate interactions between atomically dispersed metal atoms and their supports.Recently,bimetallic SACs(bimSACs)have garnered significant attention for leveraging the synergistic functions of two metal ions coordinated on appropriately designed supports.BimSACs offer an avenue for rich metal–metal and metal–support cooperativity,potentially addressing current limitations of SACs in effectively furnishing transformations which involve synchronous proton–electron exchanges,substrate activation with reversible redox cycles,simultaneous multi-electron transfer,regulation of spin states,tuning of electronic properties,and cyclic transition states with low activation energies.This review aims to encapsulate the growing advancements in bimSACs,with an emphasis on their pivotal role in hydrogen generation via water splitting.We subsequently delve into advanced experimental methodologies for the elaborate characterization of SACs,elucidate their electronic properties,and discuss their local coordination environment.Overall,we present comprehensive discussion on the deployment of bimSACs in both hydrogen evolution reaction and oxygen evolution reaction,the two half-reactions of the water electrolysis process.

Effects of Different Heavy Crude Oil Fractions on the Stability of Oil-in-water Emulsions —— Isolation of functional fractions from heavy crude oil and study of their properties

The functional fractions (acid, basic, amphoteric and neutral fractions) are isolated from the Liaohe Du-84 heavy crude oil and Shengli Gudao Kenxi heavy crude oil by ion-exchange chromatography, but the conventional fractions (saturates, aromatics, resins and asphaltenes) are also isolated from the heavy crude oil. These components have been characterized by spectroscopic methods (FT-IR), namely acid number, basic nitrogen number, ultimate analysis and molecular weight measurements using vapor pressure osmometry (VPO). The ion-exchange chromatography method based on separation by a functional group induces a little change on the nature of the crudes and reasonable mass balances can be easily obtained.

Analysis and Evaluation of Heavy Metal Environmental Quality of Irrigation Water in Vegetable Farmlands of Shandong Province

[Objective] The aim was to evaluate heavy metal environmental quality of irrigation water in vegetable farmlands of Shandong Province. [Method] Heavy metal contents including Hg,Cd,As,Cr (+6),Pb,Cu and Zn in irrigation water of main vegetable farmlands of Shandong Province were investigated by randomly sampling,and the environmental quality conditions of these heavy metals were evaluated by methods of single quality index and complex quality index. [Result] The results showed that the average contents of heavy metals in irrigation water of Shouguang,Laiyang,Jinxiang and Zhangqiu were all far lower than the limit values prescribed by 'Farmland Environmental Quality Evaluation Standards for Edible Agricultural Products' (HJ332-2006),and no heavy metal was found beyond the limit value in every sample. The single quality indices of the 7 elements in the studied 4 places were all lower than 0.5. The comprehensive quality index of the seven elements was 0.317 8 in Shouguang,0.320 4 in Laiyang,0.232 6 in Jinxiang,and 0.260 7 in Zhangqiu. The environmental quality of irrigation water in the studied four places were all set at the first class. [Conclusion] The environmental quality of irrigation water in the 4 places belonged to clean level and were fit for the plantation of no pollution vegetables.

Adsorption of Cr(VI) by modified chitosan from heavy-metal polluted water of Xiangjiang River, China

Methacrylic acid was used together with a molecular imprinting technique to modify chitosan. In addition, the adsorption kinetics and adsorption isotherms were recorded and the results were analyzed to investigate reparative adsorption for Cr（VI） from the polluted Xiangjiang River water. A comparative X-ray analysis shows that the degree of crystallization in the imprinted polymer was significantly weakened, the area of the non-crystalline region was larger. There were more adsorption sites in the imprinted polymer, and the adsorption capacity towards Cr（VI） was increased. The adsorption capacity of the imprinted polymer towards Cr（VI） increased with time and reaches saturation after 8 h. The optimal adsorption time was 4-8 h after the adsorption starting and the optimal pH value for the solution was in the range of 4.5-7.5. When the chitosan reaches saturation, the adsorption capacity achieves a state of equilibrium, and the maximum Cr（VI） extraction rate reaches 33.7%. Moreover, the adsorption capacity of the imprinted polymer towards Cr（VI） increases with increasing chitosan concentration. In this situation, the Cr（VI） extraction rate shows little variation, and the maximum removal rate can reach 98.3%. Furthermore, the Cr（VI） extraction rate increases with an increase in the degree of deacetylation in the chatoyant and chitosan, with the best adsorption effect corresponding to 90% deacetylation. Fitting the adsorption data to the quasi first- and second-order kinetic models yields correlation coefficients of 0.9013 and 0.9875, respectively. The corresponding rate constants for the two models are 0.0091 min-1 and 7.129 g/（mg.min）, respectively. Hence, the adsorption using Cr（VI）-imprinted chitosan is more consistent with the second-order kinetics. Comparing the data to Freundlich and Langrnuir adsorption isotherms shows that the latter has a better linear fit and a maximum adsorption capacity of 15.784 mg/g.

Source analysis and ecological risk assessment for heavy metals in the sediments of the Yangshan Deepwater Harbor in autumn and winter

Temporal and spatial variations of concentrations of heavy metals including mercury （Hg）, zinc （Zn）, lead （Pb）, arsenic （As）, copper （Cu）, and cadmium （Cd） in the sediments of the Yangshan Deepwater Harbor were determined based on 6 cruises in autumn and winter, respectively, from 2010 to 2013. The results demonstrated that the overall concentrations of heavy metals were low and distributed in uniform patterns. The concentrations of Hg, Zn, Pb, and Cd in autumn were significantly higher than those in winter with small fluctuations for As and Cu in terms of seasonal variations. Results of factor analysis showed that Pb, Cd, and Zn were derived from inland industrial and shipping discharges as well as the degradation of organic pollutants in marine environment. While agricultural pollutions, cargo shifting and construction debris from reclamation projects contributed to the sources of Cu, As, and Hg. Ecological risk assessment by Mean Sediment Quality Guideline Quotient （SQG-Q） revealed that the degree for eco-risk of the sediments was low-and-moderate in autumn, higher than that in winter. Hg and Cu were the dominant eco-risk factors. The results of Index of geoaccumulation （Igeo） showed that the whole sites of the sea area were barely influenced by Hg, As, Zn, and Pb, and the extents of Cd and Cu contaminations were in low grade. Contamination degree of all the six heavy metals could be ranked as the following： Cd〉Pb〉Zn〉Hg〉As. According to the results of integrated score of factor analysis, the contamination degree for heavy metals in sediments of the Yangshan Deepwater Harbor was low, despite sites No.5, No.4 and No.3, which were heavily contaminated compared with others.

Advances in Microbial Remediation on the Application of Heavy Metal Pollution in Agricultural Water Resources

Heavy metal pollution in agricultural water resources is very serious in re- cent years, resulting in large losses of the agricultural economy and endangering human life and health. Due to the advantages of low cost, high efficiency and less secondary pollution, microbial ramediation technology is widely used in the treatment of heavy metal pollution in agricultural water resources. At present, with the progress of modern biotechnology, microbial remediation of heavy metals in agricul- tural water resources has grown rapidly. The sources and status quo of heavy met- al pollution in agricultural water resources at home and aboard, and the principles of microbial remediation of heavy metals pollution in agricultural water resources were reviewed in this paper, as well as the several common microbial remediation technology of heavy metals in agricultural water resources. Additionally, the further research work of heavy metal contaminated agricultural water resources by microbial ramediation were prospected.

Phytoremediation of heavy metal polluted soils and water:Progresses and perspectives

Environmental pollution affects the quality of pedosphere,hydrosphere,atmosphere,lithosphere and biosphere.Great efforts have been made in the last two decades to reduce pollution sources and remedy the polluted soil and water resources.Phytoremediation,being more cost-effective and fewer side effects than physical and chemical approaches,has gained increasing popularity in both academic and practical circles.More than 400 plant species have been identified to have potential for soil and water remediation.Among them,Thlaspi,Brassica,Sedum alfredii H.,and Arabidopsis species have been mostly studied.It is also expected that recent advances in biotechnology will play a promising role in the development of new hyperaccumulators by transferring metal hyperaccumulating genes from low biomass wild species to the higher biomass producing cultivated species in the times to come.This paper attempted to provide a brief review on recent progresses in research and practical applications of phytoremediation for soil and water resources.

Water and Heavy Metal Transport in Roadside Soils

Roads with very high traffic loads in regions where soils are low in both pH and sorption capacity might be a source of percolation water loaded with heavy metals. Looking at some "worst case" scenarios, this study focused on the input of traffic related pollutants and on Pb, Cd, Cu, Zn, Ni and Cr concentrations in the soil matrix and soil solution, respectively. The analysis also included pH and electrical conductivity and at some sites DOC. The investigations were carried out on sandy soils with more or less low pH values at four motorway sites in Germany. The average of daily traffic was about 50 000 up to 90 000 vehicles. Soil pore water was collected in two soil depths and at four distances from the road. The pH in general decreased with increasing distance from the roadside. The elevated pH near the roadside was presumably caused by deposition of dust and weathering residues of the road asphalt, as well as by infiltration of salt that was used during winter time. At these road sites, increased heavy metal concentrations in the soil matrix as well as in the soil solution were found. However, the concentrations seldom exceeded reference values of the German Soil Protection Act. The soil solution concentrations tended to increase from the road edge to 10 m distance, whereas the concentration in the soil matrix decreased. Elevated DOC concentrations corresponded with elevated Cu concentrations but did not substantially change this tendency. High soil water percolation rates were found near the roads. Thus, even low metal concentrations of percolation water could yield high metal loads in a narrow area beside the road.

Heavy metals pollution in water,suspended matter and surface sediment in typical mountainous urban river:A case study in Qingshui Stream in Chongqing,China

Based on a detailed environmental investigation of the whole Qingshui Stream catchments,samples of water and surface sediments were collected at 15 different places from the upper to the lower reaches of Qingshui Stream,and samples of suspended matter were obtained by filtrating the water samples. The concentrations of heavy metals (Cd,Cu and Zn) were measured in filtered water,suspended matter,and surface sediment by ICP-AES. The results show that the concentrations of the three heavy metals in filtered water are 0.18,6.6 and 17.67 μg/L,lower than that of the Fresh Water Quality Criteria (US EPA) and those of the plain urban rivers,but the contents of Cd,Cu and Zn are much higher than the mean values of rivers in the world and the background value in Jialing River basin. The heavy metals concentrations in the suspended matter from Qingshui Stream are 2.08,438.14 and 1 348.05 mg/kg,much higher than the corresponding background values of soils in Chongqing city. The heavy metals concentrations in the surface sediment from Qingshui Stream are 0.84,189.75 and 838.23 mg/kg,and the values of index of geoaccumulation Igeo of Cd,Cu and Zn show that their pollution degrees are moderate. The heavy metals exist in three transferable forms such as water,suspended matter and surface sediment in Qingshui Stream. The heavy metals concentrations in water are the lowest,and those in the suspended matter are the highest,so the ecological risk in suspended matter is the highest. The distribution tendencies of three metals in water,suspended matter and surface sediment in main riverbed are different.