Guidelines for standard operation of imaging modalities in orbital diseases (2024)

Orbital disorders include conditions originating from the orbital bones,surrounding tissues,and post-orbital septum.They also include systemic ailments affecting the orbit.Different clinical symptoms make up the complex range of orbital disorders.Because these disorders mostly impact the orbital area instead of the intraocular compartment,there is little diagnostic usefulness for typical ophthalmic visual tests.As such,the vital instruments for diagnosing and evaluating orbital illnesses have become ophthalmic imaging modalities,including ocular ultrasonography(B-scan),computed tomography(CT),and magnetic resonance imaging(MRI).One way to improve the precision and promptness of diagnosing orbital diseases is to standardize the functioning of widely used imaging equipment and define the radiological features of orbital abnormalities.Such programs are crucial for the care of patients with orbital disorders since they considerably reduce the number of misdiagnoses and missed diagnoses in these individuals.The underlying concepts,operational techniques,and normal and pathological imaging findings associated with common diagnostic tools for orbital illnesses are all thoroughly reviewed in this guideline.The objective is to improve primary healthcare settings’diagnostic competence in the field of orbital pathology and to standardize procedures for diagnosing orbital disorders.

Standard heat treatment effects on TLP bonded IN-738LC superalloy using BNi-9 filler:An approach to make an ideal joint

The present research is focused on the effects of standard heat treatment on the microstructure and mechanical properties of diffusion brazed IN-738 LC superalloy.Three distinct heat treatment cycles of full solution annealing,partial solution annealing,and aging treatment were applied to the bonded specimens,sequentially.The results reveal that bonding at 1120℃for 5 min leads to incomplete isothermal solidification and formation of eutectic phases including Ni-and Cr-rich borides in the joint centerline.Increasing the holding time to 45 min leads to the full isothermal solidification and formation of a nickel proeutectic solid-solution phase(γ)in the joints.The standard heat treatment of isothermally solidified and non-isothermally solidified specimens results in the complete elimination of the boride phases in the diffusion-affected zone and also the formation ofγ’precipitates in the isothermally solidified zone.However,discontinuously re-solidified products are observed in joint district in the non-isothermally solidified sample.The highest shear strength(~801 MPa)is achieved for isothermally solidified specimen after standard heat treatment;this strength is approximately 99%that of the substrate material.

MRI IDEAL-IQ在2型糖尿病患者腹部脂肪量化中的应用价值

目的采用磁共振(MRI)非对称回波的最小二程估算法迭代水脂分离(IDEAL-IQ)技术评价2型糖尿病对腹部脂肪分布及内脏脂肪沉积的影响。方法前瞻性纳入温州医科大学附属第二医院29例健康志愿者(对照组)和39例2型糖尿病患者(2型糖尿病组),两组均进行3.0T磁共振IDEAL-IQ序列扫描,得到脂肪分数图像。在脂肪分数图像上测量两组右肝、椎体、两肾实质和肾窦以及胰腺的质子密度脂肪分数(PDFF)、腹腔内脂肪组织(VAT)面积和皮下脂肪组织(SAT)面积。比较两组PDFF、VAT面积和SAT面积。结果2型糖尿病组的右肝、胰腺、左肾窦、右肾窦和椎体的PDFF值均高于对照组,差异有统计学意义(均P<0.05)。2型糖尿病组的VAT面积显著大于对照组[(105.47±7.12)cm^(2)vs(81.36±6.94)cm^(2),P=0.043],而两组SAT面积差异无统计学意义(P>0.05)。在所有参与者中,VAT面积分别与右肝、胰腺、椎体、左肾窦和右肾窦PDFF呈显著正相关。结论MRI IDEAL-IQ技术可以量化成人腹部脏器及结构的脂肪情况,2型糖尿病影响患者腹部脂肪分布并导致腹腔内脏脂肪沉积。

磁共振IDEAL-IQ序列定量分析腹腔内脏脂肪含量与2型糖尿病的关系

目的探讨腹腔内脏脂肪含量与糖尿病发生的关系,进而探讨其预测T2DM发病的可行性。方法收集行腹部3.0T MRI检查并有T2DM患者45例(T2DM组),对照组80例,应用IDEAL软件进行图像自动重组,获得脂肪分数(FF图)、弛豫率(R2*)、脂相、水相、同反相位图像。将FF图传至AW 4.6工作站,由两名观察者采用双盲法对FF图进行测量。应用ITK-SNAP软件采用阈值分割法半自动勾画腹腔内脏脂肪(VAT)及皮下脂肪组织(SAT),并计算体积。采用SPSS 26.0软件对数据进行统计学分析。结果(1)T2DM组的腹腔内脏脂肪组织体积(VATV)、肝脏脂肪分数(HFF)、胰腺脂肪分数(PFF)、甘油三酯(TG)及空腹血糖(FBG)均高于对照组,高密度脂蛋白(HDL)低于对照组,差异有统计学意义(P<0.05);(2)ROC曲线分析示:PFF判断是否患T2DM的曲线下面积(AUC)为0.656(P<0.01,95%CI:0.534~0.777),截断值为8.44%,敏感度为50%,特异度为82.5%;HFF判断是否患T2DM的AUC为0.744(P<0.05,95%CI:0.637~0.851),截断值、敏感度、特异度分别为2.99%、97.5%、42.5%。男性患者VATV判断T2DM的最佳阈值为3466 cm^(3),敏感度为63.2%,特异度为89.5%,AUC为0.78(P<0.01),联合SATV、PFF及HFF时,敏感度为78.9%,特异度为84.2%,AUC为0.839(P<0.01);女性患者利用VATV诊断T2DM的最佳阈值为2103 cm^(3),利用该阈值判断T2DM的敏感度为66.7%,特异度为66.7%,AUC为0.68(P<0.05),联合SATV、PFF及HFF时,敏感度为90.5%,特异度为76.2%,AUC为0.909(P<0.01)。(3)TG和FBG每增加1个单位,患T2DM的风险就分别提升了3986.3%及417.1%,即TG和FBG是T2DM发病的独立预测因子。结论PFF、HFF及VATV单独在预测T2DM发病方面,检验效能较低。VATV联合SATV、PFF、HFF预测T2DM发生的检验效能显著提高,其敏感度及特异度亦均明显提高。IDEAL-IQ技术是评估T2DM患者腹腔内异位脂肪组织沉积定量的便捷的方法,具有简单、稳定性好及重复性高的优势。

Development of a new cerebral ischemia reperfusion model of Mongolian gerbils and standardized evaluation system

Background:The Mongolian gerbil is an excellent laboratory animal for preparing the cerebral ischemia model due to its inherent deficiency in the circle of Willis.However,the low incidence and unpredictability of symptoms are caused by numerous complex variant types of the circle.Additionally,the lack of an evaluation system for the cer-ebral ischemia/reperfusion(I/R)model of gerbils has shackled the application of this model.Methods:We created a symptom-oriented principle and detailed neurobehavioral scoring criteria.At different time points of reperfusion,we analyzed the alteration in locomotion by rotarod test and grip force score,infarct volume by triphenyltetrazo-lium chloride(TTC)staining,neuron loss using Nissl staining,and histological charac-teristics using hematoxylin-eosin(H&E)straining.Results:With a successful model rate of 56%,32 of the 57 gerbils operated by our method harbored typical features of cerebral I/R injury,and the mortality rate in the male gerbils was significantly higher than that in the female gerbils.The suc-cessfully prepared I/R gerbils demonstrated a significant reduction in motility and grip strength at 1 day after reperfusion;formed obvious infarction;exhibited typi-cal pathological features,such as tissue edema,neuronal atrophy and death,and vacuolated structures;and were partially recovered with the extension of reperfu-sion time.Conclusion:This study developed a new method for the unilateral common carotid artery ligation I/R model of gerbil and established a standardized evaluation system for this model,which could provide a new cerebral I/R model of gerbils with more practical applications.

The impact of the Rural Minimum Living Standard Guarantee(Rural Dibao)Program on child nutrition outcomes

The Rural Minimum Living Standard Guarantee(Rural Dibao)is an important unconditional cash transfer program to alleviate poverty in rural China.Despite the importance of children’s nutrition in breaking poverty cycles,little is known about the impact of Rural Dibao on child nutrition outcomes.Using China Family Panel Studies(CFPS),this paper examines the effects of Rural Dibao on child nutrition outcomes and investigates potential pathways and heterogeneous effects.We exploit propensity score matching and difference-in-differences techniques to evaluate the effects of the Rural Dibao program on child nutrition outcomes.Our results suggest that Rural Dibao significantly impacts the nutrition outcomes of children up to 15 years of age.Specifically,our results suggest that Rural Dibao improves child height-to-age z-scores by 1.05 standard deviations and lowers the probability of stunting by 11.9 percentage points.Additional analyses suggest that increased protein intake is the main pathway through which Rural Dibao participation contributes to better nutrition outcomes.We also find that the effect of the program is more pronounced among girls,children who are non-left-behind or live with highly educated mothers,and those from low-income families and poor areas.Our findings suggest that Rural Dibao participation helps improve child nutrition outcomes through improving diet quality.

基于多端交互协同的“IDeal”智能社区终端开发与设计

智慧社区是通过各种智能技术和方式整合社区现有的各类服务资源,为社区业主提供便捷服务的新模式、新平台。为迎合市场需求和填补商场空缺,实现社区主要服务项目的数字化管理,“IDeal”智能社区终端采取多端交互协同的设计方案,从业主和社区管理人员2个方面进行设计,通过采取TCP/IP协议、部署云端服务器等,轻松实现了业主移动终端和管理人员PC端的实时交互。整体终端系统设计从实际出发,紧密贴合了物业管理服务和社区业主的需要,应用效果较好,克服了同类软件的弊端,提升了社区管理服务的数字化、智能化水平。

On the Optimal Initial Inner-Core Size for Tropical Cyclone Intensification: An Idealized Numerical Study

Recent observational and numerical studies have revealed the dependence of the intensification rate on the inner-core size of tropical cyclones(TCs). In this study, with the initial inner-core size(i.e., the radius of maximum wind—RMW)varied from 20–180 km in idealized simulations using two different numerical models, we found a nonmonotonic dependence of the lifetime maximum intensification rate(LMIR) on the inner-core size. Namely, there is an optimal innercore size for the LMIR of a TC. Tangential wind budget analysis shows that, compared to large TCs, small TCs have large inward flux of absolute vorticity due to large absolute vorticity inside the RMW. However, small TCs also suffer from strong lateral diffusion across the eyewall, which partly offsets the positive contribution from large inward flux of absolute vorticity. These two competing processes ultimately lead to the TC with an intermediate initial inner-core size having the largest LMIR. Results from sensitivity experiments show that the optimal size varies in the range of 40–120 km and increases with higher sea surface temperature, lower latitude, larger horizontal mixing length, and weaker initial TC intensity. The 40–120 km RMW corresponds to the inner-core size most commonly found for intensifying TCs in observations, suggesting the natural selection of initial TC size for intensification. This study highlights the importance of accurate representation of TC inner-core size to TC intensity forecasts by numerical weather prediction models.

IDEAL-IQ序列在冈上肌腱损伤后肩袖肌群脂肪浸润定量评估中的应用

目的采用非对称采集与迭代最小二乘估算法迭代水脂分离(iteraterative decomposition of water and fat with echo asymmetry and least-squares estimation quantitation,IDEAL-IQ)方法定量评估冈上肌腱损伤的严重程度与肩袖肌群脂肪浸润程度及受试者特征之间的关系。材料与方法回顾性分析2022年8月至2024年6月本院经肩关节镜证实的33例冈上肌腱部分撕裂患者及89例完全撕裂患者,均进行了常规MRI扫描及IDEAL-IQ序列扫描。由两名放射科医生分别对所有受试者的MRI图像进行独立评估,根据常规MRI图像的冈上肌腱损伤表现,将完全撕裂组的冈上肌腱按照Patte分型分为Patte 1型(Ⅱ级)、Patte 2型(Ⅲ级)、Patte 3型(Ⅳ级),将部分撕裂组定义为Ⅰ级。同时在斜矢状位上进行Goutallier分级及Thomazeau萎缩分级,并通过GE ADW 4.7工作站后处理软件在IDEAL-IQ序列生成的脂肪分数图像上测量冈上肌、冈下肌、肩胛下肌及小圆肌脂肪分数(fat fraction,FF)。用组内相关系数(intra-class correlation coefficient,ICC)及Kappa一致性检验评估观察者间及观察者内的一致性。采用Kruskal-Wallis H检验、单因素ANOVA检验分析FF值在不同分组之间的差异,组间两两比较用Bonferroni检验。采用Pear_(s)on相关性分析肩袖肌肉FF值与年龄、症状持续时间的相关性(相关系数r),Spearman相关性分析冈上肌腱损伤分级与肩袖肌群FF值、Goutallier分级及Thomazeau萎缩分级之间的相关性(相关系数r_(s))。结果(1)冈上肌、冈下肌、肩胛下肌的FF值在冈上肌腱损伤Ⅳ级中显著高于Ⅲ级,高于Ⅱ级和Ⅰ级,差异有统计学意义(P值分别为<0.001、<0.001、0.005);小圆肌的FF值在不同分级之间差异无统计学意义(P=0.073)。组内比较Ⅰ级和Ⅱ级的冈上肌、冈下肌、肩胛下肌、小圆肌FF值差异无统计学意义(P值分别为0.026、0.102);Ⅲ级和Ⅳ级的FF值差异有统计学意义(P<0.001)。(2)冈上肌、冈下肌、小圆肌的FF值与年龄呈中等相关(r值分别为0.381、0.339、0.349,P均<0.001),肩胛下肌的FF值与年龄呈弱相关(r=0.216,P=0.017);冈上肌、冈下肌、肩胛下肌FF值与症状持续时间呈中等程度相关(r分别为0.442、0.412、0.314,P均<0.001),小圆肌的FF值与症状持续时间呈弱相关(r=0.277,P=0.002);冈上肌腱损伤程度与冈上肌FF值呈显著相关(r_(s)=0.740,P<0.001),与冈下肌的FF值呈强相关性(r_(s)=0.596,P<0.001),与肩胛下肌、小圆肌的FF值呈弱相关(r_(s)分别为0.257、0.212,P值分别为0.004、0.019);冈上肌损伤程度分级与Goutallier分级、Thomazeau分级之间呈显著正相关(r_(s)分别为0.757、0.737,P均<0.001),且冈上肌FF值在Goutallier和Thomazeau的分级中差异具有统计学意义(P均<0.001)。结论3.0 T MR IDEAL-IQ序列能量化和客观评估肩袖肌群脂肪浸润程度,肩袖肌群脂肪浸润程度与冈上肌腱损伤分级呈正相关,与年龄、症状持续时间呈正相关。

Performance and Safety Improvement of Induction Motors based on Testing and Evaluation Standards

The induction motor,which converts electrical energy into mechanical energy,has been recognized as the cornerstone of industrialization.The rotor of an induction motor can be either a squirrel cage rotor or a wound-type rotor,both existing as magnetless topologies.Three-phase squirrel cage induction motors are frequently utilized in industrial drives because they are dependable,have high starting torque,are selfstarting and affordable.Single-phase induction motors,on the other hand,are commonly used for small loads such as domestic appliances in form of modest fans,pumps and electric power tools.In South Africa,there have been reports of fires and explosions resulting in live and property loss because of induction motors that have not been thoroughly tested or are incorrectly labelled in terms of ratings,electrical safety and performance.The goal of this study is targeted at preventing end-user injuries and failures caused by non-compliant induction motors,by evaluating locally manufactured/imported induction motors based on tests and evaluation from standards(IEC and SANS).The study is conducted using experimental procedures at the Explosion Prevention Technology and Rotating Machines(EPT and RM)laboratory,South African Bureau of Standards(SABS),South Africa.The main finding from the study shows differences in the nameplate characteristics of various induction motors which could have detrimental effects such as production and operational downtime in their end-use industries,at later stages.

INCOMPRESSIBLE LIMIT OF IDEAL MAGNETOHYDRODYNAMICS IN A DOMAIN WITH BOUNDARIES

We study the incompressible limit of classical solutions to compressible ideal magneto-hydrodynamics in a domain with a flat boundary.The boundary condition is characteristic and the initial data is general.We first establish the uniform existence of classical solutions with respect to the Mach number.Then,we prove that the solutions converge to the solution of the incompressible MHD system.In particular,we obtain a stronger convergence result by using the dispersion of acoustic waves in the half space.

Standardized ileal digestibility of amino acids in soybean meal fed to non-pregnant and pregnant sows

Background Two studies were designed to determine standard ileal crude protein(CP)and amino acid(AA)digestibility of soybean meal(SBM)from different origins fed to non-pregnant and pregnant sows.Seven solvent-extracted SBMs from soybeans produced in the USA,Brazil,and China were selected.In Exp.1,eight different diets were created:a nitrogen(N)-free diet and 7 experimental diets containing SBM from different origins as the only N source.Eight non-pregnant,multiparous sows were arranged in an 8×8 Latin square design(8 periods and 8 diets).In Exp.2,the diet formula was the same as in Exp.1.Eight gestating sows(parity 3)were assigned to 4 different diets in a replicated 4×3 Youden square design(three periods and four diets)in mid-gestation and again in late-gestation stages.Results When fed to non-pregnant and late-gestating sows,the standardized ileal digestibility(SID)of CP and most AAs from different SBM were not significantly different(P>0.05).When fed to mid-gestating sows,the SID values for Arg,His,Lys,Phe,Cys,Gly,Ser,and Tyr in SBM 1 were lower than in SBM 4 and 5(P<0.05),whereas SID for Leu from SBM 5 was higher than in SBM 1 and 4(P<0.05).SID values for Ile,Ala,and Asp from SBM 4 were lower than in SBM 1 and 5(P<0.05).Sows had significantly greater SID values for Lys,Ala,and Asp during mid-gestation when compared with late-gestation stages(P<0.05).Mid-gestating sows had greater SID value for Val and lower SID value for Tyr when compared with non-pregnant and late-gestating sows(P<0.01),whereas non-pregnant sows had significantly greater SID value for Met when compared with gestating sows(P<0.01).Conclusions When fed to mid-gestating sows,the SID values for most AAs varied among SBM samples.The SID values for Lys,Met,Val,Ala,Asp,and Tyr in SBM were affected by sow gestation stages.Our findings provide a cornerstone for accurate SBM use in sow diets.

Research on batch multielement rapid quantitative analysis based on the standard curve-assisted calibration-free laserinduced breakdown spectroscopy method

This study proposes a batch rapid quantitative analysis method for multiple elements by combining the advantages of standard curve(SC)and calibration-free laser-induced breakdown spectroscopy(CF-LIBS)technology to achieve synchronous,rapid,and accurate measurement of elements in a large number of samples,namely,SC-assisted CF-LIBS.Al alloy standard samples,divided into calibration and test samples,were applied to validate the proposed method.SC was built based on the characteristic line of Pb and Cr in the calibration sample,and the contents of Pb and Cr in the test sample were calculated with relative errors of 6%and 4%,respectively.SC built using Cr with multiple characteristic lines yielded better calculation results.The relative contents of ten elements in the test sample were calculated using CF-LIBS.Subsequently,the SC-assisted CF-LIBS was executed,with the majority of the calculation relative errors falling within the range of 2%-5%.Finally,the Al and Na contents of the Al alloy were predicted.The results demonstrate that it effectively enables the rapid and accurate quantitative analysis of multiple elements after a single-element SC analysis of the tested samples.Furthermore,this quantitative analysis method was successfully applied to soil and Astragalus samples,realizing an accurate calculation of the contents of multiple elements.Thus,it is important to advance the LIBS quantitative analysis and its related applications.

Combination Activity of Standard Antituberculosis Drugs and Extracts of Medicinal Plants Commonly Used in Traditional Treatment of Tuberculosis in Uganda

Introduction: Resistance to antituberculosis drugs and adverse drug reactions remain the leading causes of tuberculosis therapeutic failure globally. Despite the increasing acceptance of medicinal plant use in combination with conventional antituberculosis drugs in treatment of tuberculosis (TB) in Uganda, there is paucity of knowledge on their combination effect. Aim: This research aimed to determine combination activity of standard antituberculosis drugs with extracts of Zanthoxylum leprieurii Guill. & Perr. and Rubia cordifolia L., the two common antituberculosis medicinal plants in Uganda, against pansensitive (H37Rv) and multi-drug resistant (MDR) Mycobacterium tuberculosis strains. Materials and Methods: Two reference MTB strains (H37Rv and MDR strain) were inoculated on Middlebrook 7H11 medium containing a combination of standard antituberculosis drugs and methanol extracts of Z. leprieurii and R. cordifolia at varying concentrations. The number of colonies on the plates was observed and counted weekly for up to 8 weeks. In vitro combination activity was determined using proportion method. Mean percentage inhibition was calculated for the reduction of number of colonies on drug-extract combination medium in relation to drug-extract-free control medium. Results: Drug-extract combinations showed good combination activity against Mycobacterium tuberculosis strains when compared with individual standard anti-TB drugs. This was more exhibited against MDR strain. There was however a reduction in percentage inhibition when extracts were combined with ethambutol and streptomycin against H37Rv strain. Conclusions: Zanthoxylum leprieurii and Rubia cordifolia in combination with standard anti-TB drugs exhibited increased in vitro activity against Mycobacterium tuberculosis, especially MDR-TB strain. This justifies the local use of these plants in traditional treatment of tuberculosis especially in resistant cases in Uganda.

基于“IDEAL”模式的物理问题解决能力培养研究

学生“物理问题解决能力弱”是长期困扰物理教学的问题,认知心理学关于问题解决的“IDEAL”模式为该问题的研究提供了新的视角。以2022年全国乙卷理综第25题为例,借助“IDEAL”模式可以清晰地梳理问题解决的过程,明确各阶段学生遇到的困难及成因。研究发现,借助“读思达”教学法,通过粗读、精读等过程,可以有效帮助学生建构物理模型、理清物理过程,从而提高物理问题解决能力。

College students compete in the National Standardization Olympiad

The finals of the “Mo Gan Shan” National Standardization Olympiad of College Students were held on October 12-13 in Huzhou city, Southeast China's Zhejiang province.The competition was guided by SAMR, and hosted by the China Association for Standardization(CAS), China Jiliang University, and the National Standardization League of Universities. Themed “Standards lead the future, innovation fulfills dreams”, the competition aims to stimulate college students' interest and enthusiasm for standardization knowledge, and cultivate standardization talents with international vision and innovation capability.

Standardization of meibomian gland dysfunction in an Egyptian population sample using a non-contact meibography technique

AIM:To develop normative data for meibomian gland dysfunction(MGD)parameters,using non-contact meibography technique of Sirius Costruzione Strumenti Oftalmici(CSO)machine,in an Egyptian population sample.METHODS:Observational,cross-sectional,analytic study,in which 104 Egyptian volunteers were included.Both upper lids were examined,using“Sirius CSO”machine.Each eyelid was given a degree of meibomian gland loss(MGL),which was calculated by the software of the machine.RESULTS:Mean percentage MGL in right upper lid was of 30.9%±12.6%,and that of left upper lid was 32.6%±11.8%.Thirty-four volunteers(32.7%)had first-degree MGL in their right upper lid,and 67.3%had second-degree loss.One volunteer(1%)had zero-degree MGL in left upper lid,28(26.9%)had first-degree loss,and 75(72.1%)had second-degree loss.Degree of MGL in right upper eyelid was not related to age,but degree of MGL in left upper eyelid increased with age.There was statistically significant difference between both genders for degree of MGL in right eye(P=0.036)and in left eye(P=0.027).CONCLUSION:Noncontact meibography is a useful non-invasive tool for diagnosing MGL.MGL is diagnosed in 100%of apparently normal individuals;26.9%-32.7%of which have first-degree MGL,and 67.3%-72.1%have second-degree MGL.

Analysis of standardization development of TCM in Sichuan

Sichuan province is home to rich traditional Chinese medicine(TCM)resources.Recent years have seen unremitting efforts of TCM standardization in the province.By analyzing the measures and existing problems,this paper provides recommendations to boost TCM development through standardization.

PDE Standardization Analysis and Solution of TypicalMechanics Problems

A numerical approach is an effective means of solving boundary value problems(BVPs).This study focuses on physical problems with general partial differential equations(PDEs).It investigates the solution approach through the standard forms of the PDE module in COMSOL.Two typical mechanics problems are exemplified:The deflection of a thin plate,which can be addressed with the dedicated finite element module,and the stress of a pure bending beamthat cannot be tackled.The procedure for the two problems regarding the three standard forms required by the PDE module is detailed.The results were in good agreement with the literature,indicating that the PDE module provides a promising means to solve complex PDEs,especially for those a dedicated finite element module has yet to be developed.

Pudong’s experience of standardization mechanism innovation

The Pudong New Area has followed the standardization polices of the country,vigorously implemented the standardization strategies,and fulfilled the historical mission of“serving as a pioneer of reform&opening-up and innovative development”.