Performance and Safety Improvement of Induction Motors based on Testing and Evaluation Standards

The induction motor,which converts electrical energy into mechanical energy,has been recognized as the cornerstone of industrialization.The rotor of an induction motor can be either a squirrel cage rotor or a wound-type rotor,both existing as magnetless topologies.Three-phase squirrel cage induction motors are frequently utilized in industrial drives because they are dependable,have high starting torque,are selfstarting and affordable.Single-phase induction motors,on the other hand,are commonly used for small loads such as domestic appliances in form of modest fans,pumps and electric power tools.In South Africa,there have been reports of fires and explosions resulting in live and property loss because of induction motors that have not been thoroughly tested or are incorrectly labelled in terms of ratings,electrical safety and performance.The goal of this study is targeted at preventing end-user injuries and failures caused by non-compliant induction motors,by evaluating locally manufactured/imported induction motors based on tests and evaluation from standards(IEC and SANS).The study is conducted using experimental procedures at the Explosion Prevention Technology and Rotating Machines(EPT and RM)laboratory,South African Bureau of Standards(SABS),South Africa.The main finding from the study shows differences in the nameplate characteristics of various induction motors which could have detrimental effects such as production and operational downtime in their end-use industries,at later stages.

Field Load Test Based SHM System Safety Standard Determination for Rigid Frame Bridge

The deteriorated continuous rigid frame bridge is strengthened by external prestressing. Static loading tests wereconducted before and after the bridge rehabilitation to verify the effectiveness of the rehabilitation process. Thestiffness of the repaired bridge is improved, and the maximum deflection of the load test is reduced from 37.9 to27.6 mm. A bridge health monitoring system is installed after the bridge is reinforced. To achieve an easy assessmentof the bridge’s safety status by directly using transferred data, a real-time safety warning system is createdbased on a five-level safety standard. The threshold for each safety level will be determined by theoretical calculationsand the outcomes of static loading tests. The highest risk threshold will be set at the ultimate limit statevalue. The remaining levels, namely middle risk, low risk, and very low risk, will be determined usingreduction coefficients of 0.95, 0.9, and 0.8, respectively.

Analysis of Standards Establishment for the Testing of Electrical Appliances

As science and technology continue to develop,power equipment has become an indispensable part of industrial production and daily life.Whether it is the precise automation machinery utilized on production lines or the convenient electrical appliances found in households,their functionality relies heavily on electrical technology.Nonetheless,without stringent safety and performance assurances,these devices could potentially endanger lives and property.Thus,this paper explores the development strategy for establishing a standardized system within the electrical testing service industry,aiming to ensure safety and reliability.

Life-Cycle Bearing Capacity for Pre-Stressed T-beams Based on Full-Scale Destructive Test

To investigate the evolution of load-bearing characteristics of pre-stressed beams throughout their service life and to provide a basis for accurately assessing the actual working state of damaged pre-stressed concrete T-beams,destructive tests were conducted on full-scale pre-stressed concrete beams.Based on the measurement and ana-lysis of beam deflection,strain,and crack development under various loading levels during the research tests,combined with the verification coefficient indicators specified in the codes,the verification coefficients of bridges at different stages of damage can be examined.The results indicate that the T-beams experience complete,incom-plete linear,and non-linear stages during the destructive test process.In the complete linear elastic stage,both the deflection and bottom strain verification coefficients comply with the specifications,indicating a good structural load-bearing capacity no longer adheres to the code’s requirements.In the non-linear stage,both coefficients exhi-bit a sharp increase,resulting in a further decrease in the structure’s load-bearing capacity.According to the pro-visions of the current code,the beam can be in the incomplete linear stage when both values fall within the code’s specified range.The strain verification coefficient sourced from the compression zone at the bottom of theflange is not recommended for assessing the bridge’s load-bearing capacity.

Comparison of RFFIT Tests with Different Standard Sera and Testing Procedures

The World Health Organization （WHO） standard assay for determining antibody level is the rapid fluorescent focus inhibition test （RFFIT） and is used to determine the degree of immunity after vaccination against rabies. To compare the difference in RFFIT results between the laboratories of The National Institute of Infectious Disease in Japan （NIID） and the Chinese Centre for Disease Control （CCDC） as well the influence of the choice of standard serum （STD） for the detection, the two laboratories detection methods were simultaneously manipulated by RFFIT. The reference serums used in NIID and the WHO standard serum used in CCDC were compared in the same RFFIT detection to determine the titer of four sera samples C1, Sl, S2 and S4 in parallel, and the titers of the detected sera samples were calculated using the standard formula for neutralizing antibody titer. No significant difference was found in RFFIT methods from the two laboratories and the RFFIT testing procedures of the two laboratories have good consistency. However, different titers were obtained with the tentative internal standard serum （TI-STD） produced by adjusting to 2.0 IU of WHO standard serum in NIID and the WHO STD. The titer determined with the TI-STD was higher than that determined with WHO STD, This difference appears to be significant and requires further investigation

A review of lithium-ion battery safety concerns:The issues,strategies,and testing standards

Efficient and reliable energy storage systems are crucial for our modern society.Lithium-ion batteries(LIBs)with excellent performance are widely used in portable electronics and electric vehicles(EVs),but frequent fires and explosions limit their further and more widespread applications.This review summarizes aspects of LIB safety and discusses the related issues,strategies,and testing standards.Specifically,it begins with a brief introduction to LIB working principles and cell structures,and then provides an overview of the notorious thermal runaway,with an emphasis on the effects of mechanical,electrical,and thermal abuse.The following sections examine strategies for improving cell safety,including approaches through cell chemistry,cooling,and balancing,afterwards describing current safety standards and corresponding tests.The review concludes with insights into potential future developments and the prospects for safer LIBs.

Presentation of Empirical Equations for Estimating Internal Friction Angle of GW and GC Soils in Mashhad, Iran Using Standard Penetration and Direct Shear Tests and Comparison with Previous Equations

Presentation of empirical equations for estimating engineering properties of soils is a simple, low cost and widely-used method. One of the major concerns in using these equations is evaluating their accuracy in different conditions and regions which often lead to doubts about obtained results. Most of these equations were derived in special laboratories, different climate conditions and in soils with different geotechnical and geological engineering properties and were generalized to other conditions. The main question is that whether these methods are also applicable to other conditions. Using local equations and narrowing the usage range of various methods based on each region’s properties are appropriate methods to solve these problems. This leads to simplified and faster analysis and high reliability in the obtained results. In this paper, empirical equations were derived to estimate internal friction angle, based on SPT numbers of Mashhad City’s soils in Iran, using SPT and direct shear tests results from 50 samples (25 GW and 25 GC soil samples). The results showed similar values for predicted?φ?values by SPT test and?φ?values determined by direct shear tests.

New Stability Tests of Positive Standard and Fractional Linear Systems

New tests for checking asymptotic stability of positive 1D continuous-time and discrete-time linear systems without and with delays and of positive 2D linear systems described by the general and the Roesser models are proposed. Checking of the asymptotic stability of positive 2D linear systems is reduced to checking of suitable corresponding 1D positive linear systems. It is shown that the stability tests can be also applied to checking the asymptotic stability of fractional discrete-time linear systems with delays. Effectiveness of the tests is shown on numerical examples.

Grading Standards of the Coefficient of Variation in the Electronic Raw Silk Size Testing

In order to shorten the difference between the raw silk size grading standards of the world and that of China, to quicken the step of the electronic raw silk testing process, the distribution of the coefficient of variation (CV50m%) of the raw silk size in the electronic testing and the development of the new standards are studied according to the sampling and grading theory. By the theoretical deduction and the simulating experiments, the distribution of the coefficient of variation of the raw silk size is given, and the grading scheme whose quality index is the coefficient of variation(CV50m%)of the raw silk size and the grading precisions of all grades are proposed. Moreover, the rightness and the feasibility of the grading scheme are testified by the sampling and grading simulation.

Test Standards for Direct Steam Generating Solar Concentrators

There are a few standards reported in the literature for testing and evaluation of thermal performance of solar concentrators based on sensible heating of working fluid. The preceding standard measures only the cooking efficiency and cooking capacity. Apart from thermal efficiency, there is an imperative need for other important parameters of the solar concentrators such as its stagnation temperature, cooking capacity, cost per watts delivered, weight of the cooker, ease of handling and aesthetics. The characterization of a concentrator at its operating temperature settles appropriate size and type of concentrator for any thermal application. The performance test is conducted at Chandwad (20.3292°N, 74.2444°E), Maharashtra and the proposed protocol aims for evaluation of thermal performance of solar cooking system and standardization of reporting the test results so that anyone can easily recognize and use it.

昆明烟区土壤线虫数量与环境因子的Mantel Test分析

为进一步明确昆明烟区影响线虫的环境因素,于2022年采集云南昆明烟区8个县(市、区)64个乡镇的320个植烟土壤样品,调查与测定样品采集地的海拔、土壤线虫数量以及土壤理化性质(pH值及有机质、水解性氮、速效钾和有效磷含量),并探讨土壤线虫数量与植烟土壤环境因子之间的潜在关系。结果表明,昆明烟区土壤线虫数量一定程度上受到海拔及土壤理化性质的影响,海拔与有机质、水解性氮和速效钾呈显著正相关,pH值与有效磷呈极显著负相关,相关系数为-0.850;土壤线虫数量与土壤有效磷呈正相关,与海拔、pH值、有机质、水解性氮、速效钾呈负相关,其中与海拔、有机质和水解性氮的相关系数较大,分别为-0.751、-0.651和-0.568。通过Mantel test分析确定海拔、有机质和水解性氮含量是影响昆明烟区土壤线虫数量的重要因子。本结果可为有效防治土壤线虫提供科学依据。

Non-standard tests for process control in chemically bonded sands

Chemically bonded sand cores and molds are more commonly referred to as precision sand systems in the high production automotive powertrain sector. Their behavior in contact with molten metal can lead to casting defects. Consequently, the interaction is of great interest and an important part of metal casting technology. The American Foundry Society(AFS) sand testing is based on physical, mechanical, thermal and chemical properties of the sand system. Foundry engineers have long known that certain AFS sand tests provide limited information regarding control of molding and casting quality. The inadequacy is due to the fact that sand casting processes are inherently thermo-mechanical, thermo-chemical and thermo-physical. Non-standard foundry sand testing has proven useful for laboratory measurement of these characteristics in foundry sand using a disc-shaped specimen. Similarly, the equivalent disc-shaped specimens are used for casting trials. In order to accomplish near-net-shape casting with minimal defects, it is necessary to understand both the properties of the sand system, as well as the interface of molten metal when different binders, additives and/or refractory coatings are used. The methodology for the following non-standard chemically bonded sand tests is described:(1) disc transverse;(2) impact;(3) modified permeability;(4) abrasion;(5) thermal distortion;(6) quick loss on ignition. The data related to the non-standard sand tests were analyzed and interpreted. The test results indicate that there is relatively lower test-to-test variability with the disc-shaped specimens. The non-standard tests were able to discriminate between the chemically bonded polyurethane cold box sand specimens. Further studies should be conducted on various other sand and binder systems as well as on different specimen thicknesses.

Development of a new cerebral ischemia reperfusion model of Mongolian gerbils and standardized evaluation system

Background:The Mongolian gerbil is an excellent laboratory animal for preparing the cerebral ischemia model due to its inherent deficiency in the circle of Willis.However,the low incidence and unpredictability of symptoms are caused by numerous complex variant types of the circle.Additionally,the lack of an evaluation system for the cer-ebral ischemia/reperfusion(I/R)model of gerbils has shackled the application of this model.Methods:We created a symptom-oriented principle and detailed neurobehavioral scoring criteria.At different time points of reperfusion,we analyzed the alteration in locomotion by rotarod test and grip force score,infarct volume by triphenyltetrazo-lium chloride(TTC)staining,neuron loss using Nissl staining,and histological charac-teristics using hematoxylin-eosin(H&E)straining.Results:With a successful model rate of 56%,32 of the 57 gerbils operated by our method harbored typical features of cerebral I/R injury,and the mortality rate in the male gerbils was significantly higher than that in the female gerbils.The suc-cessfully prepared I/R gerbils demonstrated a significant reduction in motility and grip strength at 1 day after reperfusion;formed obvious infarction;exhibited typi-cal pathological features,such as tissue edema,neuronal atrophy and death,and vacuolated structures;and were partially recovered with the extension of reperfu-sion time.Conclusion:This study developed a new method for the unilateral common carotid artery ligation I/R model of gerbil and established a standardized evaluation system for this model,which could provide a new cerebral I/R model of gerbils with more practical applications.

Standardization of apple cancellation test for neglect patients in Korea:An observational study

BACKGROUND Neglect can be divided into two types using apple cancellation test(apple test):Egocentric neglect(EN)and allocentric neglect(AN).However,in South Korea,apple test results and decision criteria are still largely dependent on tests by foreign countries.AIM To establish a new South Korea standard and improve the accuracy of neglect assessment,the apple experiment was standardized in this study.METHODS This study was conducted on 223 healthy subjects for a total of 7 mo from August 2021 to February 2022.Standardization was carried out using the original apple test developed by Bickerton in 2011.In scoring for the apple test,total omission error refers to the number of missed targets(full apple)in the entire test sheet(left,middle,and right area).The score for EN is the difference between the correct number of right area and the correct number of left area(excluding the middle area).For AN,the score is difference between the number of left opening apples and number of right opening apples(including the middle area).Linear regression analysis was used for standardization using the general characteristics of subjects and the results of the apple test.RESULTS The cut-off score,which is the standard value indicating the pathological condition by combining the results of all subjects,is as follows:Total omission error(5),error for EN(2),and error for AN(2).Also,differences in cut-off score according to age were found.CONCLUSION This study will be helpful in facilitating a more accurate differential diagnosis of neglect.

Failure characterization of fully grouted rock bolts under triaxial testing

Confining stresses serve as a pivotal determinant in shaping the behavior of grouted rock bolts.Nonetheless,prior investigations have oversimplified the three-dimensional stress state,primarily assuming hydrostatic stress conditions.Under these conditions,it is assumed that the intermediate principal stress(σ_(2))equals the minimum principal stress(σ_(3)).This assumption overlooks the potential variations in magnitudes of in situ stress conditions along all three directions near an underground opening where a rock bolt is installed.In this study,a series of push tests was meticulously conducted under triaxial conditions.These tests involved applying non-uniform confining stresses(σ_(2)≠σ_(3))to cubic specimens,aiming to unveil the previously overlooked influence of intermediate principal stresses on the strength properties of rock bolts.The results show that as the confining stresses increase from zero to higher levels,the pre-failure behavior changes from linear to nonlinear forms,resulting in an increase in initial stiffness from 2.08 kN/mm to 32.51 kN/mm.The load-displacement curves further illuminate distinct post-failure behavior at elevated levels of confining stresses,characterized by enhanced stiffness.Notably,the peak load capacity ranged from 27.9 kN to 46.5 kN as confining stresses advanced from σ_(2)=σ_(3)=0 to σ_(2)=20 MPa and σ_(3)=10 MPa.Additionally,the outcomes highlight an influence of confining stress on the lateral deformation of samples.Lower levels of confinement prompt overall dilation in lateral deformation,while higher confinements maintain a state of shrinkage.Furthermore,diverse failure modes have been identified,intricately tied to the arrangement of confining stresses.Lower confinements tend to induce a splitting mode of failure,whereas higher loads bring about a shift towards a pure interfacial shear-off and shear-crushed failure mechanism.

Unbound^(28)O,the heaviest oxygen isotope observed:a cutting-edge probe for testing nuclear models

The beyond-dripline oxygen isotopes^(27,28)O were recently observed at RIKEN,and were found to be unbound decaying into^(24)O by emitting neutrons.The unbound feature of the heaviest oxygen isotope,^(28)O,provides an excellent test for stateof-the-art nuclear models.The atomic nucleus is a self-organized quantum manybody system comprising specific numbers of protons Z and neutrons N.

Inspection and testing stressed in standards comparison and compliance action

The symposium on inspection and testing bodies in the special action on standards comparison and complianee of 10,000 enterprises of 1,000 sectors in 100 cities was held in Beijing on April 16,which was attended by more than 70 representatives from SAMR and inspection and testing bodies.

Application of Using Standard Equipment for Dental Scaler Tip Testing according to ISO 18397

The objective of this work was to study the use of standard equipment in amplitude and frequency tests of dental scaler tip according to ISO 18397.Four types of standard equipment:a laser displacement sensor,a microscope,a tachometer,and an ultrasonic frequency meter,were experimentally investigated to test a tip.The standard laser displacement sensor and the standard microscope were used to test the unloaded amplitude of the scaler tip.It was found that two types of standard equipment were able to measure the unloaded amplitude of the tip.The standard microscope was also employed for the loaded amplitude test.This test was performed by pressing the scaler tip with a load of 1 N,which was measured by a load cell set.The peak-to-peak amplitude found from the test was 116.7 m.The frequency test of the scaler tip was conducted using the standard laser displacement sensor,the tachometer and the ultrasonic frequency meter.All three types of standard equipment were found to be able to test the frequency of the tip without cooling liquid.Nevertheless,only the standard tachometer was capable of measuring the frequency of the tip with cooling liquid applied.

The impact of the Rural Minimum Living Standard Guarantee(Rural Dibao)Program on child nutrition outcomes

The Rural Minimum Living Standard Guarantee(Rural Dibao)is an important unconditional cash transfer program to alleviate poverty in rural China.Despite the importance of children’s nutrition in breaking poverty cycles,little is known about the impact of Rural Dibao on child nutrition outcomes.Using China Family Panel Studies(CFPS),this paper examines the effects of Rural Dibao on child nutrition outcomes and investigates potential pathways and heterogeneous effects.We exploit propensity score matching and difference-in-differences techniques to evaluate the effects of the Rural Dibao program on child nutrition outcomes.Our results suggest that Rural Dibao significantly impacts the nutrition outcomes of children up to 15 years of age.Specifically,our results suggest that Rural Dibao improves child height-to-age z-scores by 1.05 standard deviations and lowers the probability of stunting by 11.9 percentage points.Additional analyses suggest that increased protein intake is the main pathway through which Rural Dibao participation contributes to better nutrition outcomes.We also find that the effect of the program is more pronounced among girls,children who are non-left-behind or live with highly educated mothers,and those from low-income families and poor areas.Our findings suggest that Rural Dibao participation helps improve child nutrition outcomes through improving diet quality.

Obtaining 2D Soil Resistance Profiles from the Integration of Electrical Resistivity Data and Standard Penetration Test (SPT) and Light Dynamic Penetrometer (DPL) Resistance Tests—Applications in Mass Movements Studies

In Brazil and various regions globally, the initiation of landslides is frequently associated with rainfall;yet the spatial arrangement of geological structures and stratification considerably influences landslide occurrences. The multifaceted nature of these influences makes the surveillance of mass movements a highly intricate task, requiring an understanding of numerous interdependent variables. Recent years have seen an emergence in scholarly research aimed at integrating geophysical and geotechnical methodologies. The conjoint examination of geophysical and geotechnical data offers an enhanced perspective into subsurface structures. Within this work, a methodology is proposed for the synchronous analysis of electrical resistivity geophysical data and geotechnical data, specifically those extracted from the Light Dynamic Penetrometer (DPL) and Standard Penetration Test (SPT). This study involved a linear fitting process to correlate resistivity with N10/SPT N-values from DPL/SPT soundings, culminating in a 2D profile of N10/SPT N-values predicated on electrical profiles. The findings of this research furnish invaluable insights into slope stability by allowing for a two-dimensional representation of penetration resistance properties. Through the synthesis of geophysical and geotechnical data, this project aims to augment the comprehension of subsurface conditions, with potential implications for refining landslide risk evaluations. This endeavor offers insight into the formulation of more effective and precise slope management protocols and disaster prevention strategies.