Energy-storage systems and their production have attracted significant interest for practical applications.Batteries are the foundation of sustainable energy sources for electric vehicles(EVs),portable electronic devi...Energy-storage systems and their production have attracted significant interest for practical applications.Batteries are the foundation of sustainable energy sources for electric vehicles(EVs),portable electronic devices(PEDs),etc.In recent decades,Lithium-ion batteries(LIBs) have been extensively utilized in largescale energy storage devices owing to their long cycle life and high energy density.However,the high cost and limited availability of Li are the two main obstacles for LIBs.In this regard,sodium-ion batteries(SIBs) are attractive alternatives to LIBs for large-scale energy storage systems because of the abundance and low cost of sodium materials.Cathode is one of the most important components in the battery,which limits cost and performance of a battery.Among the classified cathode structures,layered structure materials have attracted attention because of their high ionic conductivity,fast diffusion rate,and high specific capacity.Here,we present a comprehensive review of the classification of layered structures and the preparation of layered materials.Furthermore,the review article discusses extensively about the issues of the layered materials,namely(1) electrochemical degradation,(2) irreversible structural changes,and(3) structural instability,and also it provides strategies to overcome the issues such as elemental phase composition,a small amount of elemental doping,structural design,and surface alteration for emerging SIBs.In addition,the article discusses about the recent research development on layered unary,binary,ternary,quaternary,quinary,and senary-based O3-and P2-type cathode materials for high-energy SIBs.This review article provides useful information for the development of high-energy layered sodium transition metal oxide P2 and O3-cathode materials for practical SIBs.展开更多
P2/O3-type Ni/Mn-based layered oxides are promising cathode materials for sodium-ion batteries(SIBs)owing to their high energy density.However,exploring effective ways to enhance the synergy between the P2 and 03 phas...P2/O3-type Ni/Mn-based layered oxides are promising cathode materials for sodium-ion batteries(SIBs)owing to their high energy density.However,exploring effective ways to enhance the synergy between the P2 and 03 phases remains a necessity.Herein,we design a P2/O3-type Na_(0.76)Ni_(0.31)Zn_(0.07)Mn_(0.50)Ti_(0.12)0_(2)(NNZMT)with high chemical/electrochemical stability by enhancing the coupling between the two phases.For the first time,a unique Na*extraction is observed from a Na-rich O3 phase by a Na-poor P2 phase and systematically investigated.This process is facilitated by Zn^(2+)/Ti^(4+)dual doping and calcination condition regulation,allowing a higher Na*content in the P2 phase with larger Na^(+)transport channels and enhancing Na transport kinetics.Because of reduced Na^(+)in the O3 phase,which increases the difficulty of H^(+)/Na^(+) exchange,the hydrostability of the O3 phase in NNZMT is considerably improved.Furthermore,Zn^(2+)/Ti^(4+)presence in NNZMT synergistically regulates oxygen redox chemistry,which effectively suppresses O_(2)/CO_(2) gas release and electrolyte decomposition,and completely inhibits phase transitions above 4.0 V.As a result,NNZMT achieves a high discharge capacity of 144.8 mA h g^(-1) with a median voltage of 3.42 V at 20 mA g^(-1) and exhibits excellent cycling performance with a capacity retention of 77.3% for 1000 cycles at 2000 mA g^(-1).This study provides an effective strategy and new insights into the design of high-performance layered-oxide cathode materials with enhanced structure/interface stability forSIBs.展开更多
The saturation rate and class of (0,m1,m2, …,mq) trigonometric inter polation operators in . spaces have been determined by Cavaretta and Selvaraj. In this paper, we consider the convergence and saturation problems o...The saturation rate and class of (0,m1,m2, …,mq) trigonometric inter polation operators in . spaces have been determined by Cavaretta and Selvaraj. In this paper, we consider the convergence and saturation problems of these operators in (1≤p≤∞) and obtain complete results.展开更多
Very recently, Yu, Le and Zhou introduced the so called △B1^＊ and △B2^＊ conditions, which are generalizations of the monotone condition. By applying these two new conditions, the author essentially generalizes the...Very recently, Yu, Le and Zhou introduced the so called △B1^＊ and △B2^＊ conditions, which are generalizations of the monotone condition. By applying these two new conditions, the author essentially generalizes the classical results of Chen on the necessary and sufficient conditions of the Lp integrability of trigonometric series. In fact, the present paper gives the first result on the necessary and sufficient conditions of the Lp integrability of trigonometric series, where coefficients may have different signs.展开更多
为了提高光伏电池转换效率、降低能量损失,有必要研究最大功率点跟踪(maximum power point tracking,MPPT)方法。针对传统扰动观察法(perturbation observation method,P&O)存在无法兼顾跟踪速度与稳态精度、在光照度发生较大变化...为了提高光伏电池转换效率、降低能量损失,有必要研究最大功率点跟踪(maximum power point tracking,MPPT)方法。针对传统扰动观察法(perturbation observation method,P&O)存在无法兼顾跟踪速度与稳态精度、在光照度发生较大变化时会产生误判现象的问题,文中提出一种能适应环境变化的变步长P&O控制策略。首先,利用光伏电池刚启动时类似恒流源的特性获取当前光照度下的短路电流,通过固定电流法推导出最大功率点(maximum power point,MPP)的参考电压;其次,当光照度突变时,提出功率修正方法,并给出突变时的变步长调整策略;最后,设计基于线性扩张状态观测器(linear extended state observer,LESO)的分数阶比例积分微分(fractional order proportion integration differentiation,FOPID)控制器,可以对算法输出的参考电压进一步进行跟踪补偿。仿真结果表明,所提控制策略可以提高稳态精度和跟踪速度,有效提高光伏电池的输出功率。展开更多
基金supported by a grant from the Subway Fine Dust Reduction Technology Development Project of the Ministry of Land Infrastructure and Transport,Republic of Korea(21QPPWB152306-03)the Basic Science Research Capacity Enhancement Project through a Korea Basic Science Institute(National Research Facilities and Equipment Center)grant funded by the Ministry of Education of the Republic of Korea(2019R1A6C1010016)。
文摘Energy-storage systems and their production have attracted significant interest for practical applications.Batteries are the foundation of sustainable energy sources for electric vehicles(EVs),portable electronic devices(PEDs),etc.In recent decades,Lithium-ion batteries(LIBs) have been extensively utilized in largescale energy storage devices owing to their long cycle life and high energy density.However,the high cost and limited availability of Li are the two main obstacles for LIBs.In this regard,sodium-ion batteries(SIBs) are attractive alternatives to LIBs for large-scale energy storage systems because of the abundance and low cost of sodium materials.Cathode is one of the most important components in the battery,which limits cost and performance of a battery.Among the classified cathode structures,layered structure materials have attracted attention because of their high ionic conductivity,fast diffusion rate,and high specific capacity.Here,we present a comprehensive review of the classification of layered structures and the preparation of layered materials.Furthermore,the review article discusses extensively about the issues of the layered materials,namely(1) electrochemical degradation,(2) irreversible structural changes,and(3) structural instability,and also it provides strategies to overcome the issues such as elemental phase composition,a small amount of elemental doping,structural design,and surface alteration for emerging SIBs.In addition,the article discusses about the recent research development on layered unary,binary,ternary,quaternary,quinary,and senary-based O3-and P2-type cathode materials for high-energy SIBs.This review article provides useful information for the development of high-energy layered sodium transition metal oxide P2 and O3-cathode materials for practical SIBs.
基金supported by the National Natural Science Foundation of China (22169002)the Chongzuo Key Research and Development Program of China (20220603)the Counterpart Aid Project for Discipline Construction from Guangxi University(2023M02)
文摘P2/O3-type Ni/Mn-based layered oxides are promising cathode materials for sodium-ion batteries(SIBs)owing to their high energy density.However,exploring effective ways to enhance the synergy between the P2 and 03 phases remains a necessity.Herein,we design a P2/O3-type Na_(0.76)Ni_(0.31)Zn_(0.07)Mn_(0.50)Ti_(0.12)0_(2)(NNZMT)with high chemical/electrochemical stability by enhancing the coupling between the two phases.For the first time,a unique Na*extraction is observed from a Na-rich O3 phase by a Na-poor P2 phase and systematically investigated.This process is facilitated by Zn^(2+)/Ti^(4+)dual doping and calcination condition regulation,allowing a higher Na*content in the P2 phase with larger Na^(+)transport channels and enhancing Na transport kinetics.Because of reduced Na^(+)in the O3 phase,which increases the difficulty of H^(+)/Na^(+) exchange,the hydrostability of the O3 phase in NNZMT is considerably improved.Furthermore,Zn^(2+)/Ti^(4+)presence in NNZMT synergistically regulates oxygen redox chemistry,which effectively suppresses O_(2)/CO_(2) gas release and electrolyte decomposition,and completely inhibits phase transitions above 4.0 V.As a result,NNZMT achieves a high discharge capacity of 144.8 mA h g^(-1) with a median voltage of 3.42 V at 20 mA g^(-1) and exhibits excellent cycling performance with a capacity retention of 77.3% for 1000 cycles at 2000 mA g^(-1).This study provides an effective strategy and new insights into the design of high-performance layered-oxide cathode materials with enhanced structure/interface stability forSIBs.
文摘The saturation rate and class of (0,m1,m2, …,mq) trigonometric inter polation operators in . spaces have been determined by Cavaretta and Selvaraj. In this paper, we consider the convergence and saturation problems of these operators in (1≤p≤∞) and obtain complete results.
基金Supported by National Natural Science Foundation of China (10901044)
文摘Very recently, Yu, Le and Zhou introduced the so called △B1^＊ and △B2^＊ conditions, which are generalizations of the monotone condition. By applying these two new conditions, the author essentially generalizes the classical results of Chen on the necessary and sufficient conditions of the Lp integrability of trigonometric series. In fact, the present paper gives the first result on the necessary and sufficient conditions of the Lp integrability of trigonometric series, where coefficients may have different signs.
文摘为了提高光伏电池转换效率、降低能量损失,有必要研究最大功率点跟踪(maximum power point tracking,MPPT)方法。针对传统扰动观察法(perturbation observation method,P&O)存在无法兼顾跟踪速度与稳态精度、在光照度发生较大变化时会产生误判现象的问题,文中提出一种能适应环境变化的变步长P&O控制策略。首先,利用光伏电池刚启动时类似恒流源的特性获取当前光照度下的短路电流,通过固定电流法推导出最大功率点(maximum power point,MPP)的参考电压;其次,当光照度突变时,提出功率修正方法,并给出突变时的变步长调整策略;最后,设计基于线性扩张状态观测器(linear extended state observer,LESO)的分数阶比例积分微分(fractional order proportion integration differentiation,FOPID)控制器,可以对算法输出的参考电压进一步进行跟踪补偿。仿真结果表明,所提控制策略可以提高稳态精度和跟踪速度,有效提高光伏电池的输出功率。
