Modeling of Intelligent Integrated Network Management System Using Object Oriented Approach *

The concept of intelligent integrated network management (IINM) is briefly introduced. In order to analyze, design and implement IINM successfully, object oriented approach is testified to be an effective and efficient way. In this paper, object oriented technique is applied to the structural model of IINM system, The Domain object class and the MU object class are used to represent the manager and the managed resources. Especially, NM IA is introduced which is a special object class with intelligent behaviors to manage the resources efficiently.

一种改进Oriented RepPoints的遥感图像有向目标检测

为解决Oriented RepPoints算法在遥感图像有向目标检测中因遥感图像背景干扰信息较多和目标尺度大小不一所导致的检测精度不高、易漏检误检等问题,提出一种改进Oriented RepPoints的遥感图像有向目标检测方法MA-RPDet(Mixed Attention RepPoints Detector).首先,采用了PVTv2作为主干网络,该网络利用线性空间缩减自注意力机制提取出更具局部连续性的特征图,并保持与卷积运算类似的线性复杂度.其次,在特征融合阶段设计了串联性混合注意力模块,进一步强化了重要特征,促进了多尺度特征的高效交互.最后,引入平滑GIoU损失函数对模型学习策略进行优化,提高了检测精度.在两个遥感图像目标检测数据集DOTA和HRSC2016上的实验结果表明,所提方法的检测精度mAP分别达到了77.19%和90.3%,均高于其他对比算法,证明了本文方法的有效性.

基于改进Oriented R-CNN的旋转框麦穗检测与计数模型

为对干扰、遮挡等复杂的田野环境中麦穗进行精准定位与计数,该研究提出了一种改进的Oriented R-CNN麦穗旋转框检测与计数方法,首先在主干网络中引入跨阶段局部空间金字塔(spatial pyramid pooling cross stage partial networks,SPPCSPC)模块扩大模型感受野,增强网络感知能力;其次,在颈网络中结合路径聚合网络(PANet,path aggregation network)和混合注意力机制(E2CBAM,efficient two convolutional block attention module),丰富特征图包含的特征信息;最后采用柔性非极大值抑制算法(Soft-NMS,soft-non maximum suppression)优化预测框筛选过程。试验结果显示,改进的模型对复杂环境中的麦穗检测效果良好。相较原模型,平均精确度均值mAP提高了2.02个百分点,与主流的旋转目标检测模型Gliding vertex、R3det、Rotated Faster R-CNN、S2anet和Rotated Retinanet相比,mAP分别提高了4.99、2.49、3.94、2.25和4.12个百分点。该研究方法利用旋转框准确定位麦穗位置,使得框内背景区域面积大幅度减少,为实际观察麦穗生长状况和统计数量提供了一种有效的方法。

Primary Recrystallization of Grain Oriented Silicon Steel Strip Rolled by CSR and Annealed in Magnetic Field

The magnetic properties and textures of grain oriented silicon steel with different thickness rolled by cross shear rolling （CSR） of different mismatched speed ratio （MSR） and annealed in magnetic field under hydrogen were presented.Effects of the factors such as thickness and mismatched speed ratio on the magnetic properties and recrystallization texture were analyzed and the recrystallization principles in magnetic field annealing were discussed. The study would provide a new route for mass production of high quality ultra-thin grain oriented silicon steel strip.

Magnetic properties and structure of (001)-oriented [CoPt/C]_n /Ag nanocomposite films on the glass substrates

The highly （1301） oriented triple system of [CoPt/C]n/Ag films was deposited on glass substrates by DC and RF magnetron sputtering. After annealing at 600℃ for 30 min, thin films become magnetically hard with coercivities in the range of 160-875 kA/m because of high anisotropy associated with the L10 ordered phase. C doping plays an important role in improving （001） texture and reducing the intergrain interactions. The oriented growth of CoPt films was influenced strongly by the number of repetitions （n） of CoPt/C. By controlling the C content and the number of repetitions （n） of CoPt/C, nearly perfect （001） orientation can be obtained in the [CoPt3nm/C3nm]5/Ag50 nm.

EFFECTS OF Sn AND Sb ON STRUCTURE AND MAGNETIC PROPERTIES OF HIGH INDUCTION ORIENTED SILICON STEEL

Effects of Sn and Sb on the structure and magnetic properties of high induction oriented silicon steel have been investigated.The heats with Sn or Sb possess rather fine primary and secondary gram sizes.Sn or Sb promotes the finer AlN particles,increases the amount of pre- cipitated AlN after normalizing and strengthens the ability of inhibition.After decarburizing annealing,the texture components of{110}〈115〉and〈110〉〈001〉tend to increase and form more secondary grain nuclei.

Fabrication and Magnetic Properties of Highly Oriented ZnO:Eu Films by Sol-Gel Process

A series of Eu-doped ZnO films were prepared by a sol-gel method. Precursor and films were characterized by thermal analysis (TG-DTA), X-ray diffraction (XRD), scanning electron microscope (SEM), UV-vis spectra, as well as the magnetism measurement. The wurtzite structure of obtained films presents an extreme high c-orientation character. The film susceptibility resembles a Curie-Weiss behavior at high temperature, and presents an obvious enhancement at low temperature, indicating the presence of antiferromagnetic interactions in the Zn0.9Eu0.1O films.

Effect of Cutting Techniques on the Structure and Magnetic Properties of a High-grade Non-oriented Electrical Steel

The high grade non-oriented electrical steel sheets containing 3.0%Si were manufacturing processed using different cutting techniques, then they were stress relief annealed（SRA）, the profiles and textures of the cutting edges were compared before and after annealing, and the magnetic properties of these specimens were tested and compared. The experimental results show that the iron loss of the specimen by water jet cutting is the lowest, but the magnetic induction under the low magnetic field is the highest, the iron loss of the specimen by laser cutting is the highest, but the magnetic induction under the low magnetic field is the lowest. It is necessary to adopt suitable production conditions and minimize the deterioration involved, and the magnetic property can be recovered by SRA effectively.

Effect of Magnesia Blending on the Magnetic Properties of Grain Oriented Silicon Steel

Decarburized samples of grain oriented silicon steel were coated with alone and blended magnesias and submitted to the high temperature annealing. The magnesias and their blendings were characterized using granulometry measurements, ignition loss and reactivity tests. After high temperature annealing, forsterite film morphology, magnetic properties and Goss deviation were also analyzed. Better magnetic properties and sharper Goss orientation were found in samples which had used blended magnesias. These results are explained by the magnesias particle size distributions, forsterite film formation and rate of inhibitors release.

A preparation strategy for protein-oriented immobilized silica magnetic beads with Spy chemistry for ligand fishing

Due to the complexity of bioactive ingredients in biological samples,the screening of target proteins is a complex process.Herein,a feasible strategy for directing protein immobilization on silica magnetic beads for ligand fishing based on SpyTag/SpyCatcher(ST/SC)-mediated anchoring is presented.Carboxyl functional groups on the surface of silica-coated magnetic beads(SMBs)were coupled with SC using the 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride/N-hydroxysulfosuccinimide method,named SC-SMBs.The green fluorescent protein(GFP),as the capturing protein model,was ST-labeled and anchored at a specific orientation onto the surface of SC-SMBs directly from relevant cell lysates via ST/SC self-ligation.The characteristics of the SC-SMBs were studied via electron microscopy,energy dispersive spectroscopy,and Fourier transform infrared spectroscopy.The spontaneity and site-specificity of this unique reaction were confirmed via electrophoresis and fluorescence analyses.Although the alkaline stability of ST-GFP-ligated SC-SMBs was not ideal,the formed isopeptide bond was unbreakable under acidic conditions(0.05 M glycine-HCl buffer,pH 1e6)for 2 h,under 20%ethanol solution within 7 days,and at most temperatures.We,therefore,present a simple and universal strategy for the preparation of diverse protein-functionalized SMBs for ligand fishing,prompting its usage on drug screening and target finding.

Investigation on the Orientation Transition of Oriented Magnetostrictive TbDyFe Crystals

〈110〉 and 〈112〉 TbDyFe magnetostrictive oriented crystals were prepared by the zone-melting unidirectional solidification method at 240 mmfh and 720 mm/h respectively. 〈112〉 oriented crystals were also obtained with 〈110〉 oriented seeds with the same technique as for growing the 〈112〉 oriented crystals. It is confirmed that this technique is stable for growing the oriented crystals in the TbDyFe alloys. Meanwhile, the variation of orientation, the solidification morphology and the magnetostriction were studied during the transition from 〈110〉 oriented seeds to the 〈112〉 oriented crystal growth. As the growth speeds up, the preferred orientation changed from 〈110〉 to 〈112〉, and its morphology develops from of initial cellular to dendritic gradually. When an axial compressive pre-stress of 10 MPa is applied, the magnetostriction at the bottom, the middle and the top are 972× 10^6, 918 × 10^-6 and 900× 10^-6 at 100 mT respectively. The middle sections with mixed orientations have the same high magnetostriction performance as those with a single preferred orientation, which may be due to its celluar-dendritic morphology.

Magnetostriction of Fe_(81) Ga_(19) oriented crystals

The effect of the orientation on the magnetostriction in Fe81Ga19 alloy has been investigated experimentally and theoretically. The Fe81Ca19 [001] and [110] oriented crystals were prepared and the magnetostriction was measured under different pre-stress. The saturation magnetostriction of the [001] oriented crystal increases from 170×10^-6 to 330×10^-6 under the pre-stress from 0 to 50 MPa. The [110] oriented crystal has a saturation magnetostriction from 20×10^-6 to 140×10^-6 with the compressive pre-stress from 0 to 40 MPa. The magnetostriction of [001] and [110] oriented crystals has been simulated based on the phenomenological theory. The domain rotation path has been determined and the resultant magnetostriction calculated under different pre-stress. The experimental and simulated results both show that the [001] oriented crystal exhibits better magnetostriction than [110] oriented crystal. The enhancement of the saturation magnetostriction by the compressive pre-stress in the [110] oriented crystal is higher than that in the [001] oriented crystal.

A Way to Build Software Culture: Distributed Object-Oriented Software Engineering over Internet

This paper focuses on Distributed Object Oriented Software Engineering over Internet, which is a way to build software culture. We believe that our work will contribute to better understanding of how to meet the needs of the big potential software market and to promote the software industry in developing country. The United States and Western Europe have well established software industry and related civilization. Software science, technology, and engineering are needed in China; however, maybe what is needed, first of all, is software civilization, including software ideas, customs, skills, arts, etc. We will draw a framework for the software culture as following: Software is the most important commodity in this age; Brilliance of hardware component era has become past fact; A software component era is ahead; Traditional linear process model is obsolete; Modern software engineering has a new face, object evolution model; Distributed object oriented software engineering over Internet is an approach to software component era; and Complete software civilization will be formed all over the world in next century.

Magnetic and Magnetocaloric Properties of Polycrystalline and Oriented Mn2-δSn

Mn-based Heusler alloys have attracted significant research attention as half-metallic materials because of their giant magnetocr.ystalline anisotropy and magnetocaloric properties.We investigate the crystal structure and magnetic properties of polycrystalline,[101]-oriented,and[100]-oriented Mn2-δ Sn prepared separately by arc melting,the Bridgeman method,and the flux method.All of these compounds crystallize in a Ni2 In-type structure.In the Mn2-δSn lattice,Mn atoms occupy all of the 2 a and a fraction of the 2 d sites.Site disorder exists between Mn and Sn atoms in the 2 c sites.In addition,these compounds undergo a re-entrant spin-glass-like transition at low temperatures,which is caused by frustration and randomness within the spin system.The magnetic properties of these systems depend on the crystal directions,which means that the magnetic interactions differ significantly along different directions.Furthermore,these materials exhibit a giant magnetocaloric effect near the Curie temperature.The largest value of maximum of magnetic entropy change(-△SM)occurs perpendicular to the[100]direction.Specifically,at 252 K,maximum-△SM is 2.91 and 3.64 J-kg-1K-1 for a magnetic field of 5 and7 T,respectively.The working temperature span over 80 K and the relative cooling power reaches 302 J/kg for a magnetic field of 7 T,which makes the Mn2-δSn compound a promising candidate for a magnetic refrigerator.

Effect of annealing parameter on microstructure and magnetic properties of cold rolled non-oriented electrical steel

The microstructure and magnetic properties of cold rolled non-oriented electrical steel,annealed at 200-1 000 ℃ for 0-240 min with different heating rates,were investigated by optical microscopy,scanning electron microscopy,Epstein frame,and transmission electron microscopy. The results show that the magnetic properties of cold rolled non-oriented electrical steel can be improved by controlling the annealing process to obtain uniform coarse grains with critical sizes after the recovery,recrystallization and growth of grains. Additionally,the annealing temperature influences the magnetic properties more significantly than annealing time,and with the increase of heating-up rate during the annealing process,the magnetic properties of the cold rolled non-oriented electrical steel increase.

Effect of Boron Content on the Microstructure and Magnetic Properties of Non-oriented Electrical Steels

The effects of boron content in the range of 0-0.0082 wt%, on the inclusion type, microstructurc, texture and magnetic properties of non-oriented electrical steels have been studied. After final annealing, the addition of excess boron（w（B0〉0.004 1 wt%） led to the formation of Fe2B particles. As boron content increased, grain size increased and reached a maximum in steel with 0.004 1 wt% boron. Furthermore, steel containing 0.004 1 wt% boron had the strongest { 100} fiber texture, Goss texture and the weakest { 111 } fiber texture among the five tested steels. Flux density firstly rapidly increased and then suddenly decreased with increasing boron content and reached a maximum in steel with 0.004 1 wt% boron. Conversely, core loss first sharply decreased and then abruptly increased with the increase of boron content and reached a minimum in steel containing 0.004 1 wt% boron. Steel containing 0.004 1 wt% boron obtained the best magnetic properties, predominantly through the development of optimum grain size and favorable texture.

Mobile Internet Oriented 3G Teleco 2.0

Mobile Internet will be the killer application of 3G. For the mobile Internet, the business model of telecom operators has to evolve to Teleco2.0. IP Multimedia Subsystem (IMS) will be used mainly for VIP and enterprise customers. Mass-oriented entertainment and new media services will be based on the Intelligent Node Overlay Node (INON)/Distributed Service Network (DSN). The core network will be flat, with an evolution route from Internet High Speed Packet Access (I-HSPA) to System Architecture Evolution (SAE), and even the Internet can be used as the core network. The low-cost mobile phone can be accessed to HTTP Internet by using 'client end software + portal'model with cloud computing. Flat rate will be the only fee model to be accepted by customers, and cheap and reasonable prices will contribute to the development of mobile Internet.

Effects of calcium treatment on non-metallic inclusions and magnetic properties of non-oriented silicon steel sheets

Based on the industrial production of non-oriented silicon steel,calcium treatment by CaSi wire feeding during the RH refining process was studied. The thermodynamics of CaS inclusion formation was analyzed, and the morphology and the size distribution were observed. Furthermore, the change in inclusion characteristics after calcium treatment and the effect of calcium treatment on magnetic properties were discussed. The results show that the formation of MnS and A1N inclusions were restrained, and the aggregating, floating and removing of microinclusions after calcium treatment were effectively promoted. The cleanliness of liquid steel was obviously increased. The main type of inclusions was single phase of CaO, with some complex inclusions composed of CaO, SiO2 and MgO. No CaS inclusion was observed after an appropriate calcium treatment. The size of all inclusions was distributed in the range of 2 - 20 μm, and the number was about 1.8 × 10^5/mm3. In addition, as an increasing amount of calcium was added,the core loss gradually decreased to a stable level, and the magnetic induction decreased quickly after a slow increase. The optimal calcium treatment mode depends on the chemical composition of steel.

STOCHASTIC OBJECT-ORIENTED PETRI NETS (SOPNS) AND ITS APPLICATION IN MODELING OF MANUFACTURING SYSTEM RELIABILITY

Object-oriented Petri nets (OPNs) is extended into stochastic object-oriented Petri nets (SOPNs) by associating the OPN of an object with stochastic transitions and introducing stochastic places. The stochastic transition of the SOPNs of a production resources can be used to model its reliability, while the SOPN of a production resource can describe its performance with reliability considered. The SOPN model of a case production system is built to illustrate the relationship between the system's performances and the failures of individual production resources.

Modeling Method of Automotive Body CAN/LIN Nets Application Protocol Based on Object-oriented Colored Petri Net

Recently automotive nets are adopted to solve increasing problems in automotive electronic systems.Technologies of automotive local area network from CAN and LIN can solve the problems of the increasing of wire bunch weight and lack in module installation space.However,the multilayer automotive nets software becomes more and more complex,and the development expense is difficult to predict and to keep in check.In this paper,the modeling method of hierarchical automotive nets and the substitution operation based on object-oriented colored Petri net(OOCPN) are proposed.The OOCPN model which analyzes the software structure and validates the collision mechanism of CAN/LIN bus can speed the automobile system development.First,the subsystems are divided and modeled by object-oriented Petri net(OOPN).According to the sets of message sharing relations,the message ports among them are set and the communication gate transitions are defined.Second,the OOPN model is substituted step by step until the inner objects in the automotive body control modules(BCM) are indivisible and colored by colored Petri net(CPN).And the color subsets mark the node messages for the collision mechanism.Third,the OOCPN model of the automotive body CAN/LIN nets is assembled,which keeps the message sets and the system can be expanded.The proposed model is used to analyze features of information sharing among the objects,and it is also used to describe each subsystem real-time behavior of processing messages and implemental device controllers operating,and puts forward a reasonable software framework for the automotive body control subsystem.The research can help to design the communication model in the automotive body system effectively and provide a convenient and rapid way for developing the logical hierarchy software.