A series of Zn–Ca–Al oxides with different CaO and ZnO contents have been prepared and evaluated in the synthesis of propylene carbonate(PC) from 1,2-propylene glycol(PG) and urea in a batch reactor. The effect of c...A series of Zn–Ca–Al oxides with different CaO and ZnO contents have been prepared and evaluated in the synthesis of propylene carbonate(PC) from 1,2-propylene glycol(PG) and urea in a batch reactor. The effect of catalyst composition, basicity and reaction process parameters such as temperature, catalyst dose, molar ratio of PG to urea, purge gas flow and reaction time has been studied to find suitable reaction conditions for the PC synthesis. The PC selectivity and yield under the desired conditions could reach 98.4% and 90.8%, respectively. The best performing catalyst also exhibited a good reusability without appreciable loss in the PC selectivity and yield after five consecutive reaction runs. In addition, a stepwise reaction pathway involving a 2-hydroxypropyl carbamate intermediate was proposed for the urea alcoholysis to PC in the presence of Zn–Ca–Al catalysts, according to the time dependences of reaction intermediates and products.展开更多
Vanillin 1, 2-propylene glycol acetal was synthesized from vanillin and 1, 2-propylene glycol using H3PMo6W6O40·nH2O as catalyst, The factors influencing the synthesis were discussed and the better reaction condi...Vanillin 1, 2-propylene glycol acetal was synthesized from vanillin and 1, 2-propylene glycol using H3PMo6W6O40·nH2O as catalyst, The factors influencing the synthesis were discussed and the better reaction conditions were found as follows： The amount of vanillin was 3.8 g, the molar ratio of vanillin was 1, 2-propylene glycol 1.0 to 2.4, the amount of catalyst was 1.6% in proportion to the total reacting materials, the volume ofcyclohexane as the water-carrying agent 4 mL, the refluxing time was 2 h at 88-96℃ and thus the product yield reached over 87%. The results show that the catalyst＇s activity is high and the reaction time is short.展开更多
MnOx-promoted Ni-based catalyst supported by ZnO was developed to selectively hydrogenate glucose into polyols in water at 523 K with a yield of 64.9%. Using glucose, sorbitol, glycerol and LA as the rawmaterials, the...MnOx-promoted Ni-based catalyst supported by ZnO was developed to selectively hydrogenate glucose into polyols in water at 523 K with a yield of 64.9%. Using glucose, sorbitol, glycerol and LA as the rawmaterials, the roles of nickel, ZnO and MnOx were investigated. The results show that nickel provided a new pathway of glucose to sorbitol and played an important role in the hydrogenation of C3 intermediates to 1,2-propanediol(1,2-PDO). The high yield of 1, 2-PDO was attributed to effective C–C bond cleavage performance of ZnO support promoted by MnOx. ZnO and MnOx contribute to the conversion of glycerol to lactic acid(LA) and LA to 1, 2-PDO, respectively. A concise pathway for hydrogenation of glucose over Ni-based catalyst was proposed.展开更多
基金Supported by the Changcheng Scholars Program of Beijing(CIT&TCD 20150316)
文摘A series of Zn–Ca–Al oxides with different CaO and ZnO contents have been prepared and evaluated in the synthesis of propylene carbonate(PC) from 1,2-propylene glycol(PG) and urea in a batch reactor. The effect of catalyst composition, basicity and reaction process parameters such as temperature, catalyst dose, molar ratio of PG to urea, purge gas flow and reaction time has been studied to find suitable reaction conditions for the PC synthesis. The PC selectivity and yield under the desired conditions could reach 98.4% and 90.8%, respectively. The best performing catalyst also exhibited a good reusability without appreciable loss in the PC selectivity and yield after five consecutive reaction runs. In addition, a stepwise reaction pathway involving a 2-hydroxypropyl carbamate intermediate was proposed for the urea alcoholysis to PC in the presence of Zn–Ca–Al catalysts, according to the time dependences of reaction intermediates and products.
文摘Vanillin 1, 2-propylene glycol acetal was synthesized from vanillin and 1, 2-propylene glycol using H3PMo6W6O40·nH2O as catalyst, The factors influencing the synthesis were discussed and the better reaction conditions were found as follows： The amount of vanillin was 3.8 g, the molar ratio of vanillin was 1, 2-propylene glycol 1.0 to 2.4, the amount of catalyst was 1.6% in proportion to the total reacting materials, the volume ofcyclohexane as the water-carrying agent 4 mL, the refluxing time was 2 h at 88-96℃ and thus the product yield reached over 87%. The results show that the catalyst＇s activity is high and the reaction time is short.
基金financially supported by the National Science Foundation of China (21671132)Shanghai Science and Technology Committee(16dz1207200)the Youth Innovation Promotion Association CAS(2015231)
文摘MnOx-promoted Ni-based catalyst supported by ZnO was developed to selectively hydrogenate glucose into polyols in water at 523 K with a yield of 64.9%. Using glucose, sorbitol, glycerol and LA as the rawmaterials, the roles of nickel, ZnO and MnOx were investigated. The results show that nickel provided a new pathway of glucose to sorbitol and played an important role in the hydrogenation of C3 intermediates to 1,2-propanediol(1,2-PDO). The high yield of 1, 2-PDO was attributed to effective C–C bond cleavage performance of ZnO support promoted by MnOx. ZnO and MnOx contribute to the conversion of glycerol to lactic acid(LA) and LA to 1, 2-PDO, respectively. A concise pathway for hydrogenation of glucose over Ni-based catalyst was proposed.
