1-butyl-3-methylimidazolium perchlorate([BMIM]ClO4) was synthesized by two steps with N-methylimidazolium.Some physico-chemical properties,such as density,surface tension,viscosity,electrical conductivity as well as e...1-butyl-3-methylimidazolium perchlorate([BMIM]ClO4) was synthesized by two steps with N-methylimidazolium.Some physico-chemical properties,such as density,surface tension,viscosity,electrical conductivity as well as electrochemical window,were investigated and solvent performance was also studied.The results show that this kind of ionic liquid is an excellent electrolyte with low viscosity,high electrical conductivity and wide electrochemical window.In addition,[BMIM]ClO4 is soluble in most conventional solvents and some metal oxides have high solubility in it,which lays the foundation of direct electrolysis of metal oxides in this ionic liquid.展开更多
Poly[ 2, 2-（m.phenylene） -5, 5-bibenzimidazole] （mPBI） were synthesized by mixing 3, 3＇, 4, 4＇-tetraaminobiphenyl and isophthallc acid in 1 -butyl-3 -methyUmidazolinm chloride （ E BMIM] CI）. Intrinsic viscosit...Poly[ 2, 2-（m.phenylene） -5, 5-bibenzimidazole] （mPBI） were synthesized by mixing 3, 3＇, 4, 4＇-tetraaminobiphenyl and isophthallc acid in 1 -butyl-3 -methyUmidazolinm chloride （ E BMIM] CI）. Intrinsic viscosity of mPBI polymers was 0.67 dL/g which was measured in 96% sulfuric acid. The polymer was characterized by Fourier transform infrared spectroscopy （FTIR）, nuclear magnetic resonance （ 1H-NMR ）, and thermogravimetric analysis （TGA）. The effects of polymerization conditions on the intrinsic viscosity of mPBI were investigated. It showed that the molecular weight of polymer mainly depended on pre-reaction time and reaction temperature. Comparison of structure and properties of mPBI synthesized in ionic liquids（ILs） and polyphosphoric acid was also reported. It indicates that the ionic liquids are a kind of good solvents in synthesis process of m_PBI and ionic liquids mainly affect molecular weight of mPBL展开更多
Regenerated cellulose/amylopectin blend fibers with controlled biodegradation were produced using dry-jet wet-spinning technology from cellulose/amylopectin/1-butyl-3-methylimidazolium chloride blends.Morphological,st...Regenerated cellulose/amylopectin blend fibers with controlled biodegradation were produced using dry-jet wet-spinning technology from cellulose/amylopectin/1-butyl-3-methylimidazolium chloride blends.Morphological,structural and chemical analyses revealed that dense,homogeneous and void-free blend fibers were prepared in a two-stage dissolution process.The blend fibers were regenerated from water and treated with water or 95%(volume fraction)ethanol.However,cellulose-amylopectin interactions caused crystalline rearrangements in the blend fibers,resulting in a general decrease in crystallinity.Generally,tensile properties decreased with increasing amylopectin content,except that the blend fibers with 10%(mass fraction)amylopectin exhibited higher tensile strength than the regenerated cellulose control fibers.Ethanol treatment reduced the hydrophilicity of the blend fibers,increasing the crystallinity of the blend fibers.The blend fibers exhibited remarkable degradation,directly proportional to the amylopectin content.Despite higher crystallinity,ethanol-treated blend fibers degraded faster than water-treated fibers,indicating amylopectin and ethanol regulated the degradation.展开更多
A 1-butyl-3-methylimidazolium chloride-salt aqueous two-phase system was studied on extraction of abused drugs. The effects of sorts of salts, temperature, concentration of salt and drugs on system were investigated s...A 1-butyl-3-methylimidazolium chloride-salt aqueous two-phase system was studied on extraction of abused drugs. The effects of sorts of salts, temperature, concentration of salt and drugs on system were investigated systematically. A satisfactory extraction efficiency of 93% was obtained for papaverine while that of morphine was 65%. The extraction mechanism was primarily discussed.展开更多
In this paper, the effect of ionic liquids on the CaCO3 crystal growth has been studied for the first time. The obtained CaCO3 crystals were charactered by the X-ray diffraction and scanning electron micrographs. The ...In this paper, the effect of ionic liquids on the CaCO3 crystal growth has been studied for the first time. The obtained CaCO3 crystals were charactered by the X-ray diffraction and scanning electron micrographs. The results showed that the control ability of ionic liquids for CaCO3 crystals growth was dependent on the counter anion very much.展开更多
Objective: To optimize the ionic liquid based microwave-assisted extraction (IL-MAE) of polyphenolic content from Peperomia pellucida (L) Kunth. Methods: The IL-MAE factors as experimental design parameters, including...Objective: To optimize the ionic liquid based microwave-assisted extraction (IL-MAE) of polyphenolic content from Peperomia pellucida (L) Kunth. Methods: The IL-MAE factors as experimental design parameters, including microwave power, extraction time, ionic liquid concentration, and liquid–solid ratio had been involved. Response surface methodology and Box–Behnken design were used to obtain predictive model (multivariate quadratic regression equation) and optimization of the extraction process. The response surface was analyzed by using the yields of total polyphenolic content as response value. Results: Based on the obtained results the optimum extraction condition, including microwave power of 30% Watts, extraction time of 18.5 min, the ionic liquid concen-tration of 0.79 mol/L, and the liquid–solid ratio of 10.72 mL/g 1-Buthyl-3-methylimidazolium tetrafluoroborate ([bmim]BF4) as a solvent was selected. The regression model was obtained to predicts the yields from Peperomia pellucida:Y = 30.250 – 1.356X1 + 2.655X2 + 2.252X3 – 0.565X4 + 0.990 X1X3 – 8.172 X1X4 – 3.439 X3X4 – 4.178 X12 – 3.210 X32 – 6.786 X42 – 7.290 X12X3 + 5.575 X1X32 – 4.843 X32X4 with R2 = 0.82519. Scale-up confirmation test was obtained the maximum yields of total polyphenolics content with the amount of 31.1725μg GAE/g. Conclusions: The IL-MAE method produced a higher extraction polyphenolic and performed rapidly, easily and efficiently.展开更多
A single-drop liquid phase micro-extraction procedure using 1-butyl-3-methylimidazolium hexafluorophosphate （[C4MIM][PF6]） was demonstrated for the sensitive determination of four phenols in water samples. Under the...A single-drop liquid phase micro-extraction procedure using 1-butyl-3-methylimidazolium hexafluorophosphate （[C4MIM][PF6]） was demonstrated for the sensitive determination of four phenols in water samples. Under the optimized conditions, the linear range of proposed method was excellent in the range of 0.5-100 μg·L^-1, the reproducibility （RSD, n=6） were in the range 5.4%-8.9% and detection limits （S/N=3） were 0.3, 0.3, 0.5 and 0.5 μg·L^-1 for 2, 4-dichlorophenol, 2-naphthol, 2-nitrophenol and 4-chlorophenol, respectively. The experimental results indicated that the effect of complex matrices natural water samples could be resolved with addition of sodium ethylene diamine tetracetate （EDTA） into the samples. Excellent spiked recoveries were achieved for these four phenols ranged from 86.2%-114.9 %. All these facts demonstrated that the proposed method with merits of low cost, simplicity and easy operating would be a competitive alternative procedure for the determination of such compounds at trace level.展开更多
The effects of N-methylimidazole cation [Cnmim] with different alkyl chain lengths, the types of cations and anions of ionic liquids and the reaction parameters on the catalytic activity and the selectivity for 4,4′-...The effects of N-methylimidazole cation [Cnmim] with different alkyl chain lengths, the types of cations and anions of ionic liquids and the reaction parameters on the catalytic activity and the selectivity for 4,4′-bisphenol F were investigated. The hydrogen bonding between the hydroxyl of phenol and the C2-position hydrogen of imidazole moiety in hydrophilic imidazole-based ionic liquid has important influence on the selectivity for 4,4′-bisphenol F, and under the conditions of the molar ratio of phenol/[C4mim][HSO4] 1:1, reaction temperature65 °C and the theoretical molar ratio of phenol/formaldehyde 2:1, the selectivity for 4,4′-bisphenol F reached69.1%. Compared with the high phenol/formaldehyde ratio reported in literatures, the low molar ratio of phenol/formaldehyde and the low reaction temperature can greatly reduce energy consumption, and has important significance for industrial application.展开更多
A new transition metal complex, [Cu（N-MeIm）4（BF4）2]（N-MeIm=N-methylated imidazoles, BF4= tetrafluoroborate）, was synthesized via the solvothermal method in ionic liquid. The ionic liquid acts as thermal decompos...A new transition metal complex, [Cu（N-MeIm）4（BF4）2]（N-MeIm=N-methylated imidazoles, BF4= tetrafluoroborate）, was synthesized via the solvothermal method in ionic liquid. The ionic liquid acts as thermal decomposition reaction medium, soft temple agent and ligand compound. The central Cu（Ⅱ） ion is coordinated by four N atoms from four N-methylated imidazole ligands, and the four N-methylated imidazole rings are perpendicular to each other. The crystal structure of [Cu（N-MeIm）4（BF4）2] was determined by single crystal X-ray diffraction. The results of thermogravimetry（TG） and Fourier transform infrared spectrometry（FTIR） analyses were in accordance with that of crystal structure. The complex showed strong ligand-based absorbance with maximum wavelength at 208 and 231 nm, which are attributed to π-π＊ transition of the N-methylated imidazole ligands.展开更多
基金Project(50574031) supported by the National Natural Science Foundation of China
文摘1-butyl-3-methylimidazolium perchlorate([BMIM]ClO4) was synthesized by two steps with N-methylimidazolium.Some physico-chemical properties,such as density,surface tension,viscosity,electrical conductivity as well as electrochemical window,were investigated and solvent performance was also studied.The results show that this kind of ionic liquid is an excellent electrolyte with low viscosity,high electrical conductivity and wide electrochemical window.In addition,[BMIM]ClO4 is soluble in most conventional solvents and some metal oxides have high solubility in it,which lays the foundation of direct electrolysis of metal oxides in this ionic liquid.
基金Natural Science Foundation of Shanghai,China(No.09ZR1401500)
文摘Poly[ 2, 2-（m.phenylene） -5, 5-bibenzimidazole] （mPBI） were synthesized by mixing 3, 3＇, 4, 4＇-tetraaminobiphenyl and isophthallc acid in 1 -butyl-3 -methyUmidazolinm chloride （ E BMIM] CI）. Intrinsic viscosity of mPBI polymers was 0.67 dL/g which was measured in 96% sulfuric acid. The polymer was characterized by Fourier transform infrared spectroscopy （FTIR）, nuclear magnetic resonance （ 1H-NMR ）, and thermogravimetric analysis （TGA）. The effects of polymerization conditions on the intrinsic viscosity of mPBI were investigated. It showed that the molecular weight of polymer mainly depended on pre-reaction time and reaction temperature. Comparison of structure and properties of mPBI synthesized in ionic liquids（ILs） and polyphosphoric acid was also reported. It indicates that the ionic liquids are a kind of good solvents in synthesis process of m_PBI and ionic liquids mainly affect molecular weight of mPBL
文摘Regenerated cellulose/amylopectin blend fibers with controlled biodegradation were produced using dry-jet wet-spinning technology from cellulose/amylopectin/1-butyl-3-methylimidazolium chloride blends.Morphological,structural and chemical analyses revealed that dense,homogeneous and void-free blend fibers were prepared in a two-stage dissolution process.The blend fibers were regenerated from water and treated with water or 95%(volume fraction)ethanol.However,cellulose-amylopectin interactions caused crystalline rearrangements in the blend fibers,resulting in a general decrease in crystallinity.Generally,tensile properties decreased with increasing amylopectin content,except that the blend fibers with 10%(mass fraction)amylopectin exhibited higher tensile strength than the regenerated cellulose control fibers.Ethanol treatment reduced the hydrophilicity of the blend fibers,increasing the crystallinity of the blend fibers.The blend fibers exhibited remarkable degradation,directly proportional to the amylopectin content.Despite higher crystallinity,ethanol-treated blend fibers degraded faster than water-treated fibers,indicating amylopectin and ethanol regulated the degradation.
基金This study was jointly supported by the National Natural Science Foundation of China(20275003 and 20335010).
文摘A 1-butyl-3-methylimidazolium chloride-salt aqueous two-phase system was studied on extraction of abused drugs. The effects of sorts of salts, temperature, concentration of salt and drugs on system were investigated systematically. A satisfactory extraction efficiency of 93% was obtained for papaverine while that of morphine was 65%. The extraction mechanism was primarily discussed.
文摘In this paper, the effect of ionic liquids on the CaCO3 crystal growth has been studied for the first time. The obtained CaCO3 crystals were charactered by the X-ray diffraction and scanning electron micrographs. The results showed that the control ability of ionic liquids for CaCO3 crystals growth was dependent on the counter anion very much.
基金funded by Directorate of Research and Humanity Engagement (DRPM), Universitas Indonesia via grant “Hibah PITTA 2017” with No. 328/UN2.R3.1/HKP.05.00/ 2017
文摘Objective: To optimize the ionic liquid based microwave-assisted extraction (IL-MAE) of polyphenolic content from Peperomia pellucida (L) Kunth. Methods: The IL-MAE factors as experimental design parameters, including microwave power, extraction time, ionic liquid concentration, and liquid–solid ratio had been involved. Response surface methodology and Box–Behnken design were used to obtain predictive model (multivariate quadratic regression equation) and optimization of the extraction process. The response surface was analyzed by using the yields of total polyphenolic content as response value. Results: Based on the obtained results the optimum extraction condition, including microwave power of 30% Watts, extraction time of 18.5 min, the ionic liquid concen-tration of 0.79 mol/L, and the liquid–solid ratio of 10.72 mL/g 1-Buthyl-3-methylimidazolium tetrafluoroborate ([bmim]BF4) as a solvent was selected. The regression model was obtained to predicts the yields from Peperomia pellucida:Y = 30.250 – 1.356X1 + 2.655X2 + 2.252X3 – 0.565X4 + 0.990 X1X3 – 8.172 X1X4 – 3.439 X3X4 – 4.178 X12 – 3.210 X32 – 6.786 X42 – 7.290 X12X3 + 5.575 X1X32 – 4.843 X32X4 with R2 = 0.82519. Scale-up confirmation test was obtained the maximum yields of total polyphenolics content with the amount of 31.1725μg GAE/g. Conclusions: The IL-MAE method produced a higher extraction polyphenolic and performed rapidly, easily and efficiently.
文摘A single-drop liquid phase micro-extraction procedure using 1-butyl-3-methylimidazolium hexafluorophosphate （[C4MIM][PF6]） was demonstrated for the sensitive determination of four phenols in water samples. Under the optimized conditions, the linear range of proposed method was excellent in the range of 0.5-100 μg·L^-1, the reproducibility （RSD, n=6） were in the range 5.4%-8.9% and detection limits （S/N=3） were 0.3, 0.3, 0.5 and 0.5 μg·L^-1 for 2, 4-dichlorophenol, 2-naphthol, 2-nitrophenol and 4-chlorophenol, respectively. The experimental results indicated that the effect of complex matrices natural water samples could be resolved with addition of sodium ethylene diamine tetracetate （EDTA） into the samples. Excellent spiked recoveries were achieved for these four phenols ranged from 86.2%-114.9 %. All these facts demonstrated that the proposed method with merits of low cost, simplicity and easy operating would be a competitive alternative procedure for the determination of such compounds at trace level.
基金Supported by the National Natural Science Foundation of China(21276217)
文摘The effects of N-methylimidazole cation [Cnmim] with different alkyl chain lengths, the types of cations and anions of ionic liquids and the reaction parameters on the catalytic activity and the selectivity for 4,4′-bisphenol F were investigated. The hydrogen bonding between the hydroxyl of phenol and the C2-position hydrogen of imidazole moiety in hydrophilic imidazole-based ionic liquid has important influence on the selectivity for 4,4′-bisphenol F, and under the conditions of the molar ratio of phenol/[C4mim][HSO4] 1:1, reaction temperature65 °C and the theoretical molar ratio of phenol/formaldehyde 2:1, the selectivity for 4,4′-bisphenol F reached69.1%. Compared with the high phenol/formaldehyde ratio reported in literatures, the low molar ratio of phenol/formaldehyde and the low reaction temperature can greatly reduce energy consumption, and has important significance for industrial application.
基金Supported by the National Natural Science Foundation of China（Nos. 51104050, 51301050, 51202047）, the Natural Science Foundation of Heilongjiang Province, China（No. E201413）, the Technology Foundation for Selected Overseas Chinese Scholar of Heilongjiang Province, China（No. 159150130002）, the Postdoctoral Scientific Research Developmental Fund of Heilongjiang Province, China（No.LBH-3236310448） and the Fundamental Research Funds for the Central Universities, China（No. GK2150260120）.
文摘A new transition metal complex, [Cu（N-MeIm）4（BF4）2]（N-MeIm=N-methylated imidazoles, BF4= tetrafluoroborate）, was synthesized via the solvothermal method in ionic liquid. The ionic liquid acts as thermal decomposition reaction medium, soft temple agent and ligand compound. The central Cu（Ⅱ） ion is coordinated by four N atoms from four N-methylated imidazole ligands, and the four N-methylated imidazole rings are perpendicular to each other. The crystal structure of [Cu（N-MeIm）4（BF4）2] was determined by single crystal X-ray diffraction. The results of thermogravimetry（TG） and Fourier transform infrared spectrometry（FTIR） analyses were in accordance with that of crystal structure. The complex showed strong ligand-based absorbance with maximum wavelength at 208 and 231 nm, which are attributed to π-π＊ transition of the N-methylated imidazole ligands.
