期刊文献+
共找到10篇文章
< 1 >
每页显示 20 50 100
Synthesis and physico-chemical properties of new green electrolyte 1-butyl-3-methylimidazolium perchlorate 被引量:3
1
作者 王晓丹 吴文远 +1 位作者 徐赣峰 将开喜 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2010年第10期2032-2036,共5页
1-butyl-3-methylimidazolium perchlorate([BMIM]ClO4) was synthesized by two steps with N-methylimidazolium.Some physico-chemical properties,such as density,surface tension,viscosity,electrical conductivity as well as e... 1-butyl-3-methylimidazolium perchlorate([BMIM]ClO4) was synthesized by two steps with N-methylimidazolium.Some physico-chemical properties,such as density,surface tension,viscosity,electrical conductivity as well as electrochemical window,were investigated and solvent performance was also studied.The results show that this kind of ionic liquid is an excellent electrolyte with low viscosity,high electrical conductivity and wide electrochemical window.In addition,[BMIM]ClO4 is soluble in most conventional solvents and some metal oxides have high solubility in it,which lays the foundation of direct electrolysis of metal oxides in this ionic liquid. 展开更多
关键词 room temperature ionic liquid 1-butyl-3-methylimidazolium perchlorate ELECTROLYTE solubility
下载PDF
Synthesis and Characterization of Poly [2,2-( m-phenylene) -5,5-bibenzimidazole] in 1-butyl-3-methylimidazolium Chloride
2
作者 白雪君 王彪 +3 位作者 唐艳芳 文志伟 江建明 王华平 《Journal of Donghua University(English Edition)》 EI CAS 2013年第3期239-243,共5页
Poly[ 2, 2-(m.phenylene) -5, 5-bibenzimidazole] (mPBI) were synthesized by mixing 3, 3', 4, 4'-tetraaminobiphenyl and isophthallc acid in 1 -butyl-3 -methyUmidazolinm chloride ( E BMIM] CI). Intrinsic viscosit... Poly[ 2, 2-(m.phenylene) -5, 5-bibenzimidazole] (mPBI) were synthesized by mixing 3, 3', 4, 4'-tetraaminobiphenyl and isophthallc acid in 1 -butyl-3 -methyUmidazolinm chloride ( E BMIM] CI). Intrinsic viscosity of mPBI polymers was 0.67 dL/g which was measured in 96% sulfuric acid. The polymer was characterized by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance ( 1H-NMR ), and thermogravimetric analysis (TGA). The effects of polymerization conditions on the intrinsic viscosity of mPBI were investigated. It showed that the molecular weight of polymer mainly depended on pre-reaction time and reaction temperature. Comparison of structure and properties of mPBI synthesized in ionic liquids(ILs) and polyphosphoric acid was also reported. It indicates that the ionic liquids are a kind of good solvents in synthesis process of m_PBI and ionic liquids mainly affect molecular weight of mPBL 展开更多
关键词 polybenzimidazole PBI 1-butyl-3-methylimidazolium chloride( [ BMIM] C1 ionic liquids(ILs) synthesis
下载PDF
Preparation and Properties of Regenerated Cellulose/Amylopectin Blend Fibers from 1-Butyl-3-Methylimidazolium Chloride with Controlled Biodegradation
3
作者 KUMI Alex Kwasi FAN Ruiling +2 位作者 ZHANG Yue CHEN Ye ZHANG Yumei 《Journal of Donghua University(English Edition)》 CAS 2024年第5期461-473,共13页
Regenerated cellulose/amylopectin blend fibers with controlled biodegradation were produced using dry-jet wet-spinning technology from cellulose/amylopectin/1-butyl-3-methylimidazolium chloride blends.Morphological,st... Regenerated cellulose/amylopectin blend fibers with controlled biodegradation were produced using dry-jet wet-spinning technology from cellulose/amylopectin/1-butyl-3-methylimidazolium chloride blends.Morphological,structural and chemical analyses revealed that dense,homogeneous and void-free blend fibers were prepared in a two-stage dissolution process.The blend fibers were regenerated from water and treated with water or 95%(volume fraction)ethanol.However,cellulose-amylopectin interactions caused crystalline rearrangements in the blend fibers,resulting in a general decrease in crystallinity.Generally,tensile properties decreased with increasing amylopectin content,except that the blend fibers with 10%(mass fraction)amylopectin exhibited higher tensile strength than the regenerated cellulose control fibers.Ethanol treatment reduced the hydrophilicity of the blend fibers,increasing the crystallinity of the blend fibers.The blend fibers exhibited remarkable degradation,directly proportional to the amylopectin content.Despite higher crystallinity,ethanol-treated blend fibers degraded faster than water-treated fibers,indicating amylopectin and ethanol regulated the degradation. 展开更多
关键词 cellulose/amylopectin blend fiber cellulose amylopectin 1-butyl-3-methylimidazolium chloride ethanol
下载PDF
1-丁基-3-甲基咪唑四氟硼酸盐的合成研究 被引量:2
4
作者 王赟 杨亮 高丹 《广东化工》 CAS 2011年第9期8-9,共2页
以1-溴丁烷和N-甲基咪唑为原料合成了中间体溴化1-丁基-3-甲基咪唑,以中间体与NaBF4进行复分解反应制备了离子液体1-丁基-3-甲基咪唑四氟硼酸盐。探讨了投料比、反应时间、反应温度对中间体和1-丁基-3-甲基咪唑四氟硼酸盐产率的影响,确... 以1-溴丁烷和N-甲基咪唑为原料合成了中间体溴化1-丁基-3-甲基咪唑,以中间体与NaBF4进行复分解反应制备了离子液体1-丁基-3-甲基咪唑四氟硼酸盐。探讨了投料比、反应时间、反应温度对中间体和1-丁基-3-甲基咪唑四氟硼酸盐产率的影响,确定了最佳合成条件。在此工艺条件下,1-丁基-3-甲基咪唑四氟硼酸盐产率可达85%以上。 展开更多
关键词 溴化1-丁基-3-甲基咪唑 1-丁基-3-甲基咪唑四氟硼酸盐 离子液体
下载PDF
1-乙基-3-甲基咪唑四氟硼酸盐的合成研究 被引量:1
5
作者 王赟 高丹 梁都 《广州化工》 CAS 2011年第15期81-83,共3页
以溴乙烷和N-甲基咪唑为原料合成了中间体溴化1-乙基-3-甲基咪唑,以中间体与NaBF4进行复分解反应制备了离子液体1-乙基-3-甲基咪唑四氟硼酸盐。探讨了投料比、反应时间、反应温度对中间体和1-乙基-3-甲基咪唑四氟硼酸盐产率的影响,确定... 以溴乙烷和N-甲基咪唑为原料合成了中间体溴化1-乙基-3-甲基咪唑,以中间体与NaBF4进行复分解反应制备了离子液体1-乙基-3-甲基咪唑四氟硼酸盐。探讨了投料比、反应时间、反应温度对中间体和1-乙基-3-甲基咪唑四氟硼酸盐产率的影响,确定了最佳合成条件。在此工艺条件下,1-乙基-3-甲基咪唑四氟硼酸盐产率可达94%以上。 展开更多
关键词 溴化1-乙基-3-甲基咪唑 1-乙基-3-甲基咪唑四氟硼酸盐 离子液体
下载PDF
The Effect of Ionic Liquids on the CaCO_3 Crystal Growth
6
作者 ZhiGuoHU ShiLiSONG +1 位作者 JianJiWANG LinYANG 《Chinese Chemical Letters》 SCIE CAS CSCD 2004年第6期707-710,共4页
In this paper, the effect of ionic liquids on the CaCO3 crystal growth has been studied for the first time. The obtained CaCO3 crystals were charactered by the X-ray diffraction and scanning electron micrographs. The ... In this paper, the effect of ionic liquids on the CaCO3 crystal growth has been studied for the first time. The obtained CaCO3 crystals were charactered by the X-ray diffraction and scanning electron micrographs. The results showed that the control ability of ionic liquids for CaCO3 crystals growth was dependent on the counter anion very much. 展开更多
关键词 Ionic liquids CaCO3 crystal growth 1-butyl-3-methylimidazolium salt.
下载PDF
Ionic Liquid-salt Aqueous Two-phase System, a Novel System for theExtraction of Abused Drugs 被引量:4
7
作者 She Hong LI Chi Yang HE +2 位作者 Hu Wei LIU Ke An LI Feng LIU 《Chinese Chemical Letters》 SCIE CAS CSCD 2005年第8期1074-1076,共3页
A 1-butyl-3-methylimidazolium chloride-salt aqueous two-phase system was studied on extraction of abused drugs. The effects of sorts of salts, temperature, concentration of salt and drugs on system were investigated s... A 1-butyl-3-methylimidazolium chloride-salt aqueous two-phase system was studied on extraction of abused drugs. The effects of sorts of salts, temperature, concentration of salt and drugs on system were investigated systematically. A satisfactory extraction efficiency of 93% was obtained for papaverine while that of morphine was 65%. The extraction mechanism was primarily discussed. 展开更多
关键词 Aqueous two-phase system ionic liquids 1-butyl-3-methylimidazolium chloride extraction abused drugs.
下载PDF
Enhancement of Sensitivity for Determination of Phenols in Environmental Water Samples by Single-drop Liquid Phase Microextraction Using Ionic Liquid prior to HPLC 被引量:5
8
作者 Qing Xiang ZHOU Jun Ping XIAO +1 位作者 Cun Ling YE Xin Ming WANG 《Chinese Chemical Letters》 SCIE CAS CSCD 2006年第8期1073-1076,共4页
A single-drop liquid phase micro-extraction procedure using 1-butyl-3-methylimidazolium hexafluorophosphate ([C4MIM][PF6]) was demonstrated for the sensitive determination of four phenols in water samples. Under the... A single-drop liquid phase micro-extraction procedure using 1-butyl-3-methylimidazolium hexafluorophosphate ([C4MIM][PF6]) was demonstrated for the sensitive determination of four phenols in water samples. Under the optimized conditions, the linear range of proposed method was excellent in the range of 0.5-100 μg·L^-1, the reproducibility (RSD, n=6) were in the range 5.4%-8.9% and detection limits (S/N=3) were 0.3, 0.3, 0.5 and 0.5 μg·L^-1 for 2, 4-dichlorophenol, 2-naphthol, 2-nitrophenol and 4-chlorophenol, respectively. The experimental results indicated that the effect of complex matrices natural water samples could be resolved with addition of sodium ethylene diamine tetracetate (EDTA) into the samples. Excellent spiked recoveries were achieved for these four phenols ranged from 86.2%-114.9 %. All these facts demonstrated that the proposed method with merits of low cost, simplicity and easy operating would be a competitive alternative procedure for the determination of such compounds at trace level. 展开更多
关键词 1-butyl-3-methylimidazolium hexafluorophosphate single-drop liquid phase microextraction phenols.
下载PDF
Highly selective synthesis for 4,4′-bisphenol F from phenol and formaldehyde catalyzed with [C_4mim][HSO_4] ionic liquid 被引量:2
9
作者 Danfeng Wang Zhicheng He +3 位作者 Zhimin Wu Ying Tan Yongfei Li Yuejin Liu 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2016年第9期1166-1170,共5页
The effects of N-methylimidazole cation [Cnmim] with different alkyl chain lengths, the types of cations and anions of ionic liquids and the reaction parameters on the catalytic activity and the selectivity for 4,4′-... The effects of N-methylimidazole cation [Cnmim] with different alkyl chain lengths, the types of cations and anions of ionic liquids and the reaction parameters on the catalytic activity and the selectivity for 4,4′-bisphenol F were investigated. The hydrogen bonding between the hydroxyl of phenol and the C2-position hydrogen of imidazole moiety in hydrophilic imidazole-based ionic liquid has important influence on the selectivity for 4,4′-bisphenol F, and under the conditions of the molar ratio of phenol/[C4mim][HSO4] 1:1, reaction temperature65 °C and the theoretical molar ratio of phenol/formaldehyde 2:1, the selectivity for 4,4′-bisphenol F reached69.1%. Compared with the high phenol/formaldehyde ratio reported in literatures, the low molar ratio of phenol/formaldehyde and the low reaction temperature can greatly reduce energy consumption, and has important significance for industrial application. 展开更多
关键词 4 4′-Bisphenol F PHENOL FORMALDEHYDE 1-butyl-3-methylimidazolium hydrogen sulfate
下载PDF
Synthesis and Characterization of [Cu(N-MeIm)4(BF4)2] in Ionic Liquid
10
作者 WANG Jingyang ZHANG Meng +6 位作者 XU Xiaodong FENG Jing WANG Yanli ZHANG Milin HAN Wei CHEN Yitung TIAN Guoxin 《Chemical Research in Chinese Universities》 SCIE CAS CSCD 2018年第1期8-12,共5页
A new transition metal complex, [Cu(N-MeIm)4(BF4)2](N-MeIm=N-methylated imidazoles, BF4= tetrafluoroborate), was synthesized via the solvothermal method in ionic liquid. The ionic liquid acts as thermal decompos... A new transition metal complex, [Cu(N-MeIm)4(BF4)2](N-MeIm=N-methylated imidazoles, BF4= tetrafluoroborate), was synthesized via the solvothermal method in ionic liquid. The ionic liquid acts as thermal decomposition reaction medium, soft temple agent and ligand compound. The central Cu(Ⅱ) ion is coordinated by four N atoms from four N-methylated imidazole ligands, and the four N-methylated imidazole rings are perpendicular to each other. The crystal structure of [Cu(N-MeIm)4(BF4)2] was determined by single crystal X-ray diffraction. The results of thermogravimetry(TG) and Fourier transform infrared spectrometry(FTIR) analyses were in accordance with that of crystal structure. The complex showed strong ligand-based absorbance with maximum wavelength at 208 and 231 nm, which are attributed to π-π* transition of the N-methylated imidazole ligands. 展开更多
关键词 Transition metal complex Ionic liquid Solvothermal method Crystal structure 1-butyl-3-methylimidazolium tetrafluoroborate
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部