Ethylene/1-hexene was copolymerized by an unbridged zirconocene, (2-PhInd)2ZrCl2/MAO (methyl aluminoxane) at 0 °C and 50 °C respectively. High copolymerization activity and 1-hexene incorporation were observ...Ethylene/1-hexene was copolymerized by an unbridged zirconocene, (2-PhInd)2ZrCl2/MAO (methyl aluminoxane) at 0 °C and 50 °C respectively. High copolymerization activity and 1-hexene incorporation were observed at 0 °C, with the co- polymer formed having random sequence distribution and narrow molecular weight distribution. Ethylene polymerization at 50 °C showed high activity, but copolymerization at 50 °C showed much lower activity, which decreased sharply with increasing 1-hexene concentration in the monomer feed. Copolymer formed at 50 °C showed blocky sequence distribution and broad mo- lecular weight distribution. A mechanism model based on ligand rotation hindered by the propagation chain has been proposed to qualitatively explain the observed phenomena.展开更多
1-hexene aromatization is a promising technology to convert excess olefin in fluid catalytic cracking(FCC)gasoline to high-value benzene(B),toluene(T),and xylene.Besides,the increasing market demand of xylene has put ...1-hexene aromatization is a promising technology to convert excess olefin in fluid catalytic cracking(FCC)gasoline to high-value benzene(B),toluene(T),and xylene.Besides,the increasing market demand of xylene has put forward higher requirements for new generation of catalyst.For increasing xylene yield in 1-hexene aromatization,the effect of mesopore structure and spatial distribution on product distribution and Zn loading was studied.Catalysts with different mesopore spatial distribution were prepared by post-treatment of parent HZSM-5 zeolite,including NaOH treatment,tetra-propylammonium hydroxide(TPAOH)treatment,and recrystallization.It was found the evenly distributed mesopore mainly prolongs the catalyst lifetime by enhancing diffusion properties but reduces the aromatics selectivity,as a result of damage of micropores close to the catalyst surface.While the selectivity of high-value xylene can be highly promoted when the mesopore is mainly distributed interior the catalyst.Besides,the state of loaded Zn was also affected by mesopores spatial distribution.On the optimized catalyst,the xylene selectivity was enhanced by 12.4%compared with conventional Zn-loaded parent HZSM-5 catalyst at conversion over 99%.It was attributed to the synergy effect of mesopores spatial distribution and optimized acid properties.This work reveals the role of mesopores in different spatial positions of 1-hexene aromatization catalysts in the reaction process and the influence on metal distribution,as well as their synergistic effect two on the improvement of xylene selectivity,which can improve our understanding of catalyst pore structure and be helpful for the rational design of high-efficient catalyst.展开更多
Utilizing solvent extraction to separate alkanes and olefins from catalytic light gasoline is an effective method for maximizing the utility of gasoline fractions.This study presents the determination of liquid-liquid...Utilizing solvent extraction to separate alkanes and olefins from catalytic light gasoline is an effective method for maximizing the utility of gasoline fractions.This study presents the determination of liquid-liquid equilibrium data for the ternary system of 1-hexene-n-hexane-3-methylsulfolane at 30℃,40℃,and 50℃under atmospheric pressure.The obtained data facilitated the construction of a ternary phase diagram for the system.The results showed that the extraction selectivity of 1-hexene/n-hexane exceeded 1.5 when using 3-methylsulfolane as the extraction solvent.Furthermore,the thermodynamic consistency of the experimental data was examined using Hand’s equation and the Othmer-Tobias method.The correlation coefficient,R^(2)≥0.9578,indicated the acceptable reliability of the phase equilibrium data.Subsequently,the NRTL(non-random two liquid)model was used to correlate the liquid-liquid phase equilibrium data and derive the binary interaction parameter.Notably,the results demonstrated that the root mean square deviation of the NRTL model correlation values from the experimental values did not exceed 2.5%.展开更多
The effect of H2S contents on the transformation of 1-hexene with hydrogen over NiMoS/γ-Al2O3 catalyst was investigated.Inhibition of H2S on both hydrogenation and isomerization reactions of olefin has been demonstra...The effect of H2S contents on the transformation of 1-hexene with hydrogen over NiMoS/γ-Al2O3 catalyst was investigated.Inhibition of H2S on both hydrogenation and isomerization reactions of olefin has been demonstrated.And the promotion effect of H2S on the formation of C6 thiols and C12 thioethers has also been observed.It was found out that there was only one type of active site on the NiMoS/γ-Al2O3 for reactions which include hydrogenation reaction,isomerization reaction and sulfides formation reaction,and the formation reactions of sulfides were superior to both hydrogenation and isomerization reactions.The reaction network for the conversion of 1-hexene in the presence of H2S was proposed.展开更多
A series of Ti/Mg supported catalysts are prepared by using ball-milled mixtures of MgCl2-ethanol adducts and NaCl as supports, and 1-hexene polymerizations catalyzed by the novel catalysts are studied. It is found th...A series of Ti/Mg supported catalysts are prepared by using ball-milled mixtures of MgCl2-ethanol adducts and NaCl as supports, and 1-hexene polymerizations catalyzed by the novel catalysts are studied. It is found that the molecular weight distribution of poly(1-hexene) becomes apparently narrower when catalysts with doped supports are used, indicating that changing the structure of the support is an effective way to regulate the active center distribution of heterogeneous Ziegler-Natta catalyst.展开更多
Two different solvents had been used to separate benzene from 1-hexene under atmosphere pressure by employing one of the following two solvents, viz.: dimethyl sulfoxide (DMSO) at 298.15 K and 318.15 K, and furfural a...Two different solvents had been used to separate benzene from 1-hexene under atmosphere pressure by employing one of the following two solvents, viz.: dimethyl sulfoxide (DMSO) at 298.15 K and 318.15 K, and furfural at 298.15 K. A series of liquid-liquid equilibrium (LLE) data had been obtained and the distribution coefficient together with the separation factor were calculated from them. Both the NRTL and the UNIQUAC models could fit in with the experimental data quite well.展开更多
The copolymerization of l-octene with styrene catalyzed by rare earth coordination catalysts has been studied for the first time. Some features and kinetic behavior are described. The overall activation energy of the ...The copolymerization of l-octene with styrene catalyzed by rare earth coordination catalysts has been studied for the first time. Some features and kinetic behavior are described. The overall activation energy of the copolymerization was 22.2 KJ/mol and the copolymerization rate could be expressed as R_p=K_p [Nd] [M]~2. (=1.68×10^(-3) L^2/mol^2. S, 50℃, [Oct]/[St]=1). The catalytic activity of various rare earth elements in Ln (naph)_3 for the copolymerization was compared and shows the following sequence: Dy, Y, Yb>Ho>Sm, Gd, Nd>Pr>Ce>La>Tm. Both monomers of l-octene and styrene in the copolymerization by Nd (naph)_3-AlEt_3 have the tendency of constant proportion copolymerization. The structure of the copolymers was studied by ~1H-NMR.展开更多
Copolymerization of ethylene/1-octene was carried out in toluene withvarious concentrations of comonomer in the feed using Et(Ind)_2ZrCl_2/MAO (methyl alu-minoxane) as catalyst. It was found that with the increase of ...Copolymerization of ethylene/1-octene was carried out in toluene withvarious concentrations of comonomer in the feed using Et(Ind)_2ZrCl_2/MAO (methyl alu-minoxane) as catalyst. It was found that with the increase of 1-octene concentration in thefeed the content of 1-octene in the copolymer increases, while the density, melting point,crystallinity and intrinsic viscosity of copolymer decrease. A copolymer with very lowdensity, containing 11.5 mol% of 1-octene (VLLDPE) can be produced with this catalystsystem. The effect of temperature and zirconium aluminum mole ratio of the catalyst onthe copolymerization was also investigated. The results of ^(13)C NMR determination of thecopolymer showed that the 1-octene units in the copolymer are principally isolated.展开更多
The random copolymer poly （1, 3-pentadiene-co-styrene） formed through cationic copolymerization using the ~ethylamine hydrochloride and hydrous aluminium chloride （Et3NHCl-AlCl3） room temperature ionic liquid as i...The random copolymer poly （1, 3-pentadiene-co-styrene） formed through cationic copolymerization using the ~ethylamine hydrochloride and hydrous aluminium chloride （Et3NHCl-AlCl3） room temperature ionic liquid as initiating agent in toluene was analyzed using IR spectra in conjunction with gel permeation chromatography （GPC）. The room temperature ionic liquid was found to have high initiatic activity for copolymerization.展开更多
The pyrolysis of 1-hexene can act as a prototype of pyrolytic mechanism in petro- leum processing. Details of C-C bond cleavage in the 1-hexene pyrolysis were investigated at the MP2/6-31 I＋＋G^＊＊ basis set level. ...The pyrolysis of 1-hexene can act as a prototype of pyrolytic mechanism in petro- leum processing. Details of C-C bond cleavage in the 1-hexene pyrolysis were investigated at the MP2/6-31 I＋＋G^＊＊ basis set level. The equilibrium geometries and key thermodynamic parameters such as Gibbs free energies and thermal enthalpies were gained. Our theoretical results show that the entropy effect plays a significant role in dissociative processes. The dissociation of 1-hexene-4-yl radical into C4H6 and C2H5 is not an H-transfer and C-C rupture elementary reaction, but a process involving H-transfer and C-C rupture.展开更多
The performance of MCM-22 zeolite for catalytic isomerization of 1-hexene has been studied. At a n(H2)/n(1-hexene) ratio of 8, the influence of steam treatment temperature, reaction temperature and reaction pressure o...The performance of MCM-22 zeolite for catalytic isomerization of 1-hexene has been studied. At a n(H2)/n(1-hexene) ratio of 8, the influence of steam treatment temperature, reaction temperature and reaction pressure on the performance of MCM-22 zeolite for catalytic skeletal isomerization of 1-hexene was examined. The experimental results showed that at a steam treatment temperature of 500℃, a reaction temperature of 270℃, a space velocity of 1.0 h-1 and a reaction pressure of 0.2 MPa, the MCM-22 zeolite exhibited excellent performance for catalytic skeletal isomerization of 1-hexene with the i-hexene yield reaching 66.15%. Compared with other commonly used molecular sieve catalysts, the MCM-22 zeolite catalyst exhibited better catalytic performance for skeletal isomerization of 1-hexene.展开更多
Promoted by various reductants,the addition of 1-iodo-4-chloro- perfluorobutane to 1-hexene giving 1:1 adduct is reported.Based on these facts,several new redox systems are proposed.
Optically active copolymers of pairs of three monomers, triphenyl (methyl methacrylate)and one or two pyridyl substituted methyl methacrylate homologues, were obtained by helix-sense-selective copolymerization using c...Optically active copolymers of pairs of three monomers, triphenyl (methyl methacrylate)and one or two pyridyl substituted methyl methacrylate homologues, were obtained by helix-sense-selective copolymerization using complexes of organolithium with chiral ligand as anionicinitiators in toluene at low temperature. The copolymers obtained with (-)-sparteine (Sp) and(S,S)-(+)-and (R, R)-(-)-2, 3-dimethoxy-1, 4-bis (dimethylamino) butanes((+)-and (-)-DDB) complexes of organolithium showed low optical activity, but PMP complex with N, N-diphenylethyleneamine monolithium amide (PMP-DPEDA-Li) was effective in synthesizingcopolymers of high optical rotation ([α]_D^(25) about+320～1370°)which were comparable to thoseof relative homopolymers with one-handed helical structure.展开更多
Two kinds of 1,4-anhydroribose derivatives,1,4-anhydro-2,3-O-benzylidene-T-D-ribopyranose(ABRP)and 1,4-anhydro-2,3-O-isopropylidene-T-D-ribopyranose(AIRP)were prepared fromD-ribose.The ringopening copolymerizations of...Two kinds of 1,4-anhydroribose derivatives,1,4-anhydro-2,3-O-benzylidene-T-D-ribopyranose(ABRP)and 1,4-anhydro-2,3-O-isopropylidene-T-D-ribopyranose(AIRP)were prepared fromD-ribose.The ringopening copolymerizations of ABRP and AIRP in various feed ratios were carried out with SbCl_5 and BF_3OEt_2 as catalyst at low temperatures.The copolymer structure was characterized by means of ^(1)H,^(13)C NMR spectroscopy and specific rotation.When SbCl_(5)was used as catalyst,the copolymer obtained had completely 1,4-β-pyranosidic structure,i.e.,cellulosetype structure.However,when BF_(3)OEt_2 was used as catalyst,the copolymer had a mixed structure of furanosidic and pyranosidic units.展开更多
The copolymerizations of methyl acrylate （MA） with different N- arylmethacrylamide （N-ArMA） were carried out in benzene solution by free radical initiation. The compositions of the copolymers were deter mined by;H...The copolymerizations of methyl acrylate （MA） with different N- arylmethacrylamide （N-ArMA） were carried out in benzene solution by free radical initiation. The compositions of the copolymers were deter mined by;H NMR method. The monomer reactivity ratios were calculated by the Fineman-Ross （F-R） method. The reactivity ratios and the activity of various N-ArMA with MA were investigated.展开更多
基金Project (Nos. 29734144 and 20274037) supported by the National Natural Science Foundation of China
文摘Ethylene/1-hexene was copolymerized by an unbridged zirconocene, (2-PhInd)2ZrCl2/MAO (methyl aluminoxane) at 0 °C and 50 °C respectively. High copolymerization activity and 1-hexene incorporation were observed at 0 °C, with the co- polymer formed having random sequence distribution and narrow molecular weight distribution. Ethylene polymerization at 50 °C showed high activity, but copolymerization at 50 °C showed much lower activity, which decreased sharply with increasing 1-hexene concentration in the monomer feed. Copolymer formed at 50 °C showed blocky sequence distribution and broad mo- lecular weight distribution. A mechanism model based on ligand rotation hindered by the propagation chain has been proposed to qualitatively explain the observed phenomena.
基金supported by National Natural Science Foundation of China(22021004).
文摘1-hexene aromatization is a promising technology to convert excess olefin in fluid catalytic cracking(FCC)gasoline to high-value benzene(B),toluene(T),and xylene.Besides,the increasing market demand of xylene has put forward higher requirements for new generation of catalyst.For increasing xylene yield in 1-hexene aromatization,the effect of mesopore structure and spatial distribution on product distribution and Zn loading was studied.Catalysts with different mesopore spatial distribution were prepared by post-treatment of parent HZSM-5 zeolite,including NaOH treatment,tetra-propylammonium hydroxide(TPAOH)treatment,and recrystallization.It was found the evenly distributed mesopore mainly prolongs the catalyst lifetime by enhancing diffusion properties but reduces the aromatics selectivity,as a result of damage of micropores close to the catalyst surface.While the selectivity of high-value xylene can be highly promoted when the mesopore is mainly distributed interior the catalyst.Besides,the state of loaded Zn was also affected by mesopores spatial distribution.On the optimized catalyst,the xylene selectivity was enhanced by 12.4%compared with conventional Zn-loaded parent HZSM-5 catalyst at conversion over 99%.It was attributed to the synergy effect of mesopores spatial distribution and optimized acid properties.This work reveals the role of mesopores in different spatial positions of 1-hexene aromatization catalysts in the reaction process and the influence on metal distribution,as well as their synergistic effect two on the improvement of xylene selectivity,which can improve our understanding of catalyst pore structure and be helpful for the rational design of high-efficient catalyst.
基金The authors wish to acknowledge financial support by the project of SINOPEC(No.223039).
文摘Utilizing solvent extraction to separate alkanes and olefins from catalytic light gasoline is an effective method for maximizing the utility of gasoline fractions.This study presents the determination of liquid-liquid equilibrium data for the ternary system of 1-hexene-n-hexane-3-methylsulfolane at 30℃,40℃,and 50℃under atmospheric pressure.The obtained data facilitated the construction of a ternary phase diagram for the system.The results showed that the extraction selectivity of 1-hexene/n-hexane exceeded 1.5 when using 3-methylsulfolane as the extraction solvent.Furthermore,the thermodynamic consistency of the experimental data was examined using Hand’s equation and the Othmer-Tobias method.The correlation coefficient,R^(2)≥0.9578,indicated the acceptable reliability of the phase equilibrium data.Subsequently,the NRTL(non-random two liquid)model was used to correlate the liquid-liquid phase equilibrium data and derive the binary interaction parameter.Notably,the results demonstrated that the root mean square deviation of the NRTL model correlation values from the experimental values did not exceed 2.5%.
基金supported by the Natural Science Foundation of Shandong China (No.2009ZRA05107)the Plan of Innovation Team of Ministry of Education China (No.IRT0759)
文摘The effect of H2S contents on the transformation of 1-hexene with hydrogen over NiMoS/γ-Al2O3 catalyst was investigated.Inhibition of H2S on both hydrogenation and isomerization reactions of olefin has been demonstrated.And the promotion effect of H2S on the formation of C6 thiols and C12 thioethers has also been observed.It was found out that there was only one type of active site on the NiMoS/γ-Al2O3 for reactions which include hydrogenation reaction,isomerization reaction and sulfides formation reaction,and the formation reactions of sulfides were superior to both hydrogenation and isomerization reactions.The reaction network for the conversion of 1-hexene in the presence of H2S was proposed.
基金This work was supported by the National Natural Science Foundation of China (grant No. 20174034, 20274037).
文摘A series of Ti/Mg supported catalysts are prepared by using ball-milled mixtures of MgCl2-ethanol adducts and NaCl as supports, and 1-hexene polymerizations catalyzed by the novel catalysts are studied. It is found that the molecular weight distribution of poly(1-hexene) becomes apparently narrower when catalysts with doped supports are used, indicating that changing the structure of the support is an effective way to regulate the active center distribution of heterogeneous Ziegler-Natta catalyst.
基金the financial supports provided by the National Natural Science Foundation of China (No.21177038)
文摘Two different solvents had been used to separate benzene from 1-hexene under atmosphere pressure by employing one of the following two solvents, viz.: dimethyl sulfoxide (DMSO) at 298.15 K and 318.15 K, and furfural at 298.15 K. A series of liquid-liquid equilibrium (LLE) data had been obtained and the distribution coefficient together with the separation factor were calculated from them. Both the NRTL and the UNIQUAC models could fit in with the experimental data quite well.
文摘The copolymerization of l-octene with styrene catalyzed by rare earth coordination catalysts has been studied for the first time. Some features and kinetic behavior are described. The overall activation energy of the copolymerization was 22.2 KJ/mol and the copolymerization rate could be expressed as R_p=K_p [Nd] [M]~2. (=1.68×10^(-3) L^2/mol^2. S, 50℃, [Oct]/[St]=1). The catalytic activity of various rare earth elements in Ln (naph)_3 for the copolymerization was compared and shows the following sequence: Dy, Y, Yb>Ho>Sm, Gd, Nd>Pr>Ce>La>Tm. Both monomers of l-octene and styrene in the copolymerization by Nd (naph)_3-AlEt_3 have the tendency of constant proportion copolymerization. The structure of the copolymers was studied by ~1H-NMR.
文摘Copolymerization of ethylene/1-octene was carried out in toluene withvarious concentrations of comonomer in the feed using Et(Ind)_2ZrCl_2/MAO (methyl alu-minoxane) as catalyst. It was found that with the increase of 1-octene concentration in thefeed the content of 1-octene in the copolymer increases, while the density, melting point,crystallinity and intrinsic viscosity of copolymer decrease. A copolymer with very lowdensity, containing 11.5 mol% of 1-octene (VLLDPE) can be produced with this catalystsystem. The effect of temperature and zirconium aluminum mole ratio of the catalyst onthe copolymerization was also investigated. The results of ^(13)C NMR determination of thecopolymer showed that the 1-octene units in the copolymer are principally isolated.
文摘The random copolymer poly （1, 3-pentadiene-co-styrene） formed through cationic copolymerization using the ~ethylamine hydrochloride and hydrous aluminium chloride （Et3NHCl-AlCl3） room temperature ionic liquid as initiating agent in toluene was analyzed using IR spectra in conjunction with gel permeation chromatography （GPC）. The room temperature ionic liquid was found to have high initiatic activity for copolymerization.
基金financially supported by the National Natural Science Foundation of China (No. 11174215)the Foundation of Shandong Province (ZR2012BL10)
文摘The pyrolysis of 1-hexene can act as a prototype of pyrolytic mechanism in petro- leum processing. Details of C-C bond cleavage in the 1-hexene pyrolysis were investigated at the MP2/6-31 I＋＋G^＊＊ basis set level. The equilibrium geometries and key thermodynamic parameters such as Gibbs free energies and thermal enthalpies were gained. Our theoretical results show that the entropy effect plays a significant role in dissociative processes. The dissociation of 1-hexene-4-yl radical into C4H6 and C2H5 is not an H-transfer and C-C rupture elementary reaction, but a process involving H-transfer and C-C rupture.
文摘The performance of MCM-22 zeolite for catalytic isomerization of 1-hexene has been studied. At a n(H2)/n(1-hexene) ratio of 8, the influence of steam treatment temperature, reaction temperature and reaction pressure on the performance of MCM-22 zeolite for catalytic skeletal isomerization of 1-hexene was examined. The experimental results showed that at a steam treatment temperature of 500℃, a reaction temperature of 270℃, a space velocity of 1.0 h-1 and a reaction pressure of 0.2 MPa, the MCM-22 zeolite exhibited excellent performance for catalytic skeletal isomerization of 1-hexene with the i-hexene yield reaching 66.15%. Compared with other commonly used molecular sieve catalysts, the MCM-22 zeolite catalyst exhibited better catalytic performance for skeletal isomerization of 1-hexene.
文摘Promoted by various reductants,the addition of 1-iodo-4-chloro- perfluorobutane to 1-hexene giving 1:1 adduct is reported.Based on these facts,several new redox systems are proposed.
基金This project is supported by the National Natural Science Foundation of China and the President Foundation of Academia Sinica
文摘Optically active copolymers of pairs of three monomers, triphenyl (methyl methacrylate)and one or two pyridyl substituted methyl methacrylate homologues, were obtained by helix-sense-selective copolymerization using complexes of organolithium with chiral ligand as anionicinitiators in toluene at low temperature. The copolymers obtained with (-)-sparteine (Sp) and(S,S)-(+)-and (R, R)-(-)-2, 3-dimethoxy-1, 4-bis (dimethylamino) butanes((+)-and (-)-DDB) complexes of organolithium showed low optical activity, but PMP complex with N, N-diphenylethyleneamine monolithium amide (PMP-DPEDA-Li) was effective in synthesizingcopolymers of high optical rotation ([α]_D^(25) about+320～1370°)which were comparable to thoseof relative homopolymers with one-handed helical structure.
文摘Two kinds of 1,4-anhydroribose derivatives,1,4-anhydro-2,3-O-benzylidene-T-D-ribopyranose(ABRP)and 1,4-anhydro-2,3-O-isopropylidene-T-D-ribopyranose(AIRP)were prepared fromD-ribose.The ringopening copolymerizations of ABRP and AIRP in various feed ratios were carried out with SbCl_5 and BF_3OEt_2 as catalyst at low temperatures.The copolymer structure was characterized by means of ^(1)H,^(13)C NMR spectroscopy and specific rotation.When SbCl_(5)was used as catalyst,the copolymer obtained had completely 1,4-β-pyranosidic structure,i.e.,cellulosetype structure.However,when BF_(3)OEt_2 was used as catalyst,the copolymer had a mixed structure of furanosidic and pyranosidic units.
文摘The copolymerizations of methyl acrylate （MA） with different N- arylmethacrylamide （N-ArMA） were carried out in benzene solution by free radical initiation. The compositions of the copolymers were deter mined by;H NMR method. The monomer reactivity ratios were calculated by the Fineman-Ross （F-R） method. The reactivity ratios and the activity of various N-ArMA with MA were investigated.
