RING-OPENING POLYMERIZATION OF l,4-DIOXAN-2-ONE INITIATED BY LANTHANUM TRIS(2,6-DI-TERT-BUTYL-4-METHYLPHENOLATE)

The ring-opening polymerization of 1,4-dioxan-2-one （PDO） was carried out by lanthanum tris（2,6-di-tert-butyl-4- methylphenolate） （La（OAr）3） as novel single component initiaLor. The influences of polymerization reaction temperature and the molar ratio of monomer to initiator on the monomer conversion and molecular weight of poly（1,4-dioxan-2-one） （PPDO） were explored. PPDO with high viscosity average molecular weight of 1.95×10^5 can be prepared at 40℃ when [PDO]/ [La（OAr）3] molar ratio was 800. Mechanism investigation shows that the polymerization proceeds through a ＂coordination- insertion＂ mechanism with selective rupture of acyl-oxygen be,nd of PDO.

Polymerization of n-Hexyl Isocyanate Initiated by Novel Rare Earth Tris(2,6-di-tert-butyl-4-methylphenolate)

The polymerization of n-hexyl isocyanate(HNCO) was carried out in the presence of a novel single initiator, rare earth tris(2,6-di-tert-butyl-4-methylphenolate)[Ln(OAr)_3]. The influences of reaction conditions such as the monomer concentration, the polymerization temperature and time, and the types of solvents on the polymerization of HNCO were studied. Polymerizations of phenyl, i-propyl, p-tolyl, n-butyl and n-octyl isocyanates with La(OAr)_3 were also examined.

喷气燃料中抗氧剂2,6-二叔丁基对甲酚的高效液相色谱分析

采用高效液相色谱法分析喷气燃料HDF 1中的抗氧化剂 2 ,6 二叔丁基对甲酚 (简称BHT)含量 ,研究了二元混合流动相中甲醇 乙酸缓冲液的比例对燃料主体和BHT分离效果的影响 ,选择了最佳分离条件 (甲醇所占体积分数为 85 % ,流速为 1mL/min) ,在此条件下 ,可测出质量分数为 1× 10 -5的BHT。用该喷气燃料配制了BHT质量分数在 2 0× 10 -6到 12 0× 10 -6之间的标准溶液 ,考察了BHT质量分数与峰面积之间的关系 。

Visible-light-induced novel cyclization of 2-(2-(arylethynyl)benzylidene)-malononitrile derivatives with 2,6-di(tert-butyl)-4-methylphenol to bridged spirocyclic compounds

A green and highly efficient strategy for the preparation of bridged spirocyclic compounds via visible-light-induced cyclization of 2-(2-(arylethynyl)benzylidene)malononitrile derivatives with 2,6-di(tert-butyl)-4-methylphenol(BHT)at room temperature was developed.The photoinduced radical reactions generated the corresponding products in good yields under simple and mild reaction conditions.

桥键烷基酚及其衍生物用于合成橡胶防老剂的研究进展

分析了2,6-二叔丁基-4-甲基苯酚(BHT)作为合成橡胶防老剂存在易迁移、易挥发、抗老化效率低等问题,阐述了BHT与桥键烷基酚类防老剂的作用机理,介绍了桥键烷基酚类防老剂的优势、合成方法,指出用桥键烷基酚及其衍生物取代BHT是合成橡胶防老剂发展的方向。

酰基吡唑啉酮配合物-玻碳复合修饰电极测定甲基苯酚的研究

制备了一种新型复合膜修饰电极[GdL3（HL）1·H2O（HL=1-对甲苯基-3-甲基-4-（a-呋喃甲酰基）-5-吡唑啉酮）／聚2,2-联吡啶（Pbpy）／玻碳电极（GCE）。运用循环伏安法（CV）和脉冲伏安法（DPV），研究了电极对食品添加剂2,6-二叔丁基-4-甲基苯酚（BHT）的电化学反应与机理。与裸电极和Pbpy／GCE相比，新修饰电极测定BHT的氧化峰电流和灵敏度均显著提高。在pH=5．0，该修饰电极测试的cv曲线于Ep=0．212V处出现一个灵敏的氧化峰。峰电位差AEp较GCE、Pbpy／GCE分别降低400mV、42mV，峰电流明显增加。在最佳条件下，氧化峰电流与BHT浓度于6．0×10^-6～2．0×10^-4mol·L-1范围内呈现良好的线性关系，检出限为1×10^-8mol／L。