EFFICIENT STRIP-MODE SAR RAW SIGNAL SIMULATION OF MIXED TARGETS BASED ON ACCURATE 2-D SPECTRUM

An accurate and efficient Synthetic Aperture Radar(SAR)raw data generator is of considerable value for testing system parameters and verifying imaging algorithms.Nevertheless,the existing simulator cannot exactly handle the case of the fast moving targets in high squint geometry.As for the issue,the analytical expression for the two Dimensional(2-D)signal spectrum of moving targets is derived and a fast raw echo simulation method is proposed in this study.The proposed simulator can accommodate the moving targets in the high squint geometry,whose processing steps of the simulation are given in detail and its computational complexity is analyzed.The simulation data for static and moving targets are processed and analyzed,and the results are given to validate the effectiveness of the proposed approach.

A 2-D Non-local Closure Model for Atmospheric Boundary Layer Simulations

In this paper a new approach for PBL simulation, the non-local closure scheme based on the transient turbulence theory has been used. It was set up as an alternative to local closure schemes which physical concept is reasonable and distinct. A 2-D non-local closure model was developed in order to study the PBL structure and simulatesome interesting atmospheric processes over non-ulliform underlying surface, especially under the convective and unique weather conditions, such as sea-land circulation and the TIBL structure. The modelled results show good agreement with field measurement.

A 2-Dimensional Micro Flow Sensor with Wide Range Flow Sensing Properties

A new silicon micro flow sensor with multiple temperature sensing elements was proposed and numerically simulated in considering wide range flow measuring properties.The micro flow sensor has three pairs of temperature sensing elements with a central heater compared with typical sensor which has only a temperature sensing element on each side of a central heater.A numerical analysis of the micro flow sensor by Finite Difference Formulation for Heat Transfer Equation was performed.The nearest pair of temperature sensor showed very good linear sensitivity between 0 to 0.4m/s flow and saturated from 0.75m/s flow.However the furthest pair of temperature sensor showed some flow sensitivity even though the flow rate of 2.0m/s.Thus,this suggested new micro flow meter with multiple temperature sensing elements could be used as a thermal mass flow sensor which has accuracy sensitivity for very wide flow range.

Comparison of Fully 3-D,Simplified 3-D and 2-D Numerical Simulations on a Circulating Fluidized Bed Boiler

Based on the fully three-dimensional(3-D)and two-dimensional(2-D)comprehensive CFD(Computational Fluid Dynamics)combustion models for a circulating fluidized bed boiler,a simplified 3-D computational domain considering the corrections of furnace side wall openings is proposed.It aims to compensate for the deficiencies of the large amount of computation in the fully 3-D model and improve the air and gas flow treatments at the openings in the simplified 2-D model.Three different computational domains,named as the fully 3-D model,simplified 3-D model and 2-D model,were implemented to perform a comparative CFD analysis in an ultra-supercritical circulating fluidized bed boiler including the hydrodynamics,penetration depth of secondary air,temperature and species distribution.The simulation results computed by the simplified3-D model yield better agreement with the fully 3-D simulation results than those of the 2-D model.The simplified 3-D model is recommended as an alternative computational domain for the conventional 2-D model in the numerical simulation of large-scale circulating fluidized bed boiler.

Simulation of silicon strip detector for space-based cosmic ray experiments with Allpix^(2)

Purpose Silicon strip detectors are widely applied in space-based cosmic ray experiments and most of the silicon strip detectors deploy an analytical method for its digitization.However,the analytical method simplifies the physical process of propagation of electrons/holes generated inside the silicon detector by particles that pass through the detector.In order to simulate silicon strip detectors with different configurations comprehensively,the Allpix^(2),an open-source software,is used to study those processes.Methods When particle passes through the silicon detector,energy is deposited based on Geant4 simulation,and electron-hole pairs are created due to the deposited energy.The Allpix^(2)simulation method and the analytical method are both used to calculate or simulate the diffusion and drift processes that electron-hole pairs propagate inside the silicon detector under internal electric field,and the number of electrons/holes accumulated at implanted strips are counted.Results and conclusion The number of electrons/holes accumulated along the implanted strips are compared between the Allpix^(2)simulation method and analytical method for different incident angles and different incident positions,they are found to be in good agreement for proton particles,while there are discrepancies for carbon and silicon particles.The Allpix^(2)software may be an important tool for the study of response of silicon strip detectors in space.The charge resolution of single implanted strip predicted by Allpix^(2)simulation method is about 4.7%for proton,3.8%for carbon and 1.6%for silicon particles for an incident angle of 45◦.

2-D NUMERICAL SIMULATION OF CRUSH BEDROCK RIVER

In this paper, the erosion-resisting coefficient was introduced to computebed deformation in a crush bedrock river. In the case of crush bedrock, there has been no propercontrol equation to describe bed stability, which leads to difficulty in calculation of the beddeformation with conventional methods. The data from field survey were used to give thee-rosion-resisting capability with an appropriate coefficient. After the determination oflongitudinal distribution expressed by polynomial regression and transversal distribution expressedby normal distribution function, the plane distribution of erosion-resisting coefficient in a crushbedrock river was obtained. With the computational results from a 2-D horizontal flow mathematicalmodel, the erosion-resisting coefficient and controlling condition of local stability were employedto compute the values of bed deformation when riverbed is stable. The above method was applied in acase study, and the computational results of flow and bed deformations are in good a-greement withphysical model test data.

2-D NUMERICAL SIMULATION OF FLOODING EFFECTS CAUSED BY SOUTH-TO-NORTH WATER TRANSFER PROJECT

Since the General Channel designed for the South-to-North Water Transfer Project in China has to cross many rivers and streams flowing from west to east, there are potentially serious effects additional flooding on the western side of the project alignment. Therefore, a 2-D numerical model for forecasting basin flood disasters was established and verified using historical flood data. The model was applied to researching the interaction between the proposed Project and flooding events for 5 streams in the Anyang River reach as a representative case study. Simulated results indicate that the model could correctly forecast the flood, submerged area and depths, and water surface elevations along the left side of the channel. The discharge capacity and location of hydraulic structures in the transfer canal alignment were analyzed. Then adjustments to the dimensions and positioning of proposed hydraulic structures were recommended at intersections, especially the addition of a channel to transfer flood water from one stream to another, which can effectively limit the sluice and protect the Anyang City from flooding.

Molecular dynamics simulation for O_2 aqueous solution

The solutions of small apolar solutes in water are important for investigating the chemical behaviour of the apolar molecules in solution. They also form simple and convenient models for understanding hydrophobic effects in more complicated systems involving proteins, micelles and membranes.

二维磁流体力学程序MFCGⅡ与MFCGⅠ计算结果的对比分析

根据磁场、电流密度和感应电流的解析公式研制了爆炸磁通压缩发生器充电和爆磁压缩过程的计算程序MFCGⅡ。在相同条件下用该程序和二维磁流体力学程序MFCGⅠ分别计算相同模型所得结果符合较好。因此用MFCGⅡ可分析、解释MFCG实验中有关的物理问题。

NUMERICAL SIMULATION AND ANALYSIS ON THE HEMODYNAMICS OF AN ELASTIC ANEURYSM

Intracranial aneurysms are pathological dilatations which endanger people＇s health. Hemodynamics is thought to be an important factor in the pathogenesis and treatment of aneurysms. To date, the bulk of investigations into hemodynamics have been conducted by making use of mathematically idealized models for rigid aneurysms and associated arteries. However the walls of aneurysms and associated arteries are elastic in vivo. This study shows the differences of the simulation between elastic and rigid wall models. The numerical simulation of elastic aneurysm model is made fi＇om a representative Digital Subtraction Angiography （DSA） image and calculated with CFD software to get the wall deformation and the velocity field. Then the results are analyzed. By comparing the simulation results of the two models from their velocity vectors and shear stress distribution, many differences can be noted. The main difference exists in the distribution of velocity magnitude at some sections, with one outlet having obviously off-center distribution for the elastic wall model. The currents of the distribution of wall shear stress along the wall of aneurysm simulated in rigid and elastic wall models were similar. But there were apparent differences between the two models on the values of wall shear stress especially at the neck of aneurysm. The off-center distribution of velocity magnitude affects the distribution of wall shear stress and the exchange of substance through the wall. The analysis demonstrated clearly that the results of 2-D elastic numerical simulation were in good agreement with the clinical and pathological practice. The results of this study play an important role in the formation, growth, rupture and prognosis of an aneurysm on clinic application.

闽江下游突发性水污染事故模拟分析

突发性水污染事故会导致严重的生态破坏，危害居民的生命安全和社会稳定。以闽江下游为例，应用二维瞬时点源的数学预测模式，定量模拟了突发性水污染事故发生后，闽江下游不同地点处污染物到达的时间和浓度值，并对突发风险事故的影响范围、程度、时间做出定量预报，同时给出了各取样口最大污染物浓度到达时间和解除警戒的时间。分析表明，数学预测模式符合污染物扩散的实际情况，可为突发性水污染事故的应急处置提供参考。

Radiation induced inter-device leakage degradation

The evolution of inter-device leakage generation technologies is studied with an N-type current with total ionizing dose in transistors in 180 nm poly-gate field device （PFD） that uses the shallow trench isolation as an effective gate oxide. The overall radiation response of these structures is determined by the trapped charge in the oxide. The impacts of different bias conditions during irradiation on the inter-device leakage current are studied for the first time in this work, which demonstrates that the worst condition is the same as traditional NMOS transistors. Moreover simulation is used to understand the bias dependence the two-dimensional technology computer-aided design

APPLICATION OF LBM-SGS MODEL TO FLOWS IN A PUMPING-STATION FOREBAY

A 2-D Lattice Boltzmann Method（LBM） coupled with a Sub-Grid Stress（SGS） model is proposed and validated by flows around a non-submerged spur dike in a channel.And then the LBM-SGS model is further applied to flows in a pumping-station forebay.Shallow water equations are numerically solved by the LBM and the turbulence can be taken into account and modeled efficiently by the Large Eddy Simulation（LES） model.The bounce-back scheme of the non-equilibrium part of the distribution function is used at the inlet boundary,the normal gradient of the distribution function is set as zero at the outlet boundary and the bounce-back scheme is applied to the solid wall to ensure non-slip boundary conditions.Firstly,the model successfully predicts the flow characteristics around a spur dike,such as circulating flow,velocity and water depth distributions.The results are verified by the experimental data and compared to the results obtained by conventional Smagoringsky Model（SM） of LES.Finally,the LBM-SGS model is used to further predict the flow characteristics in a forebay,such as secondary flow and water level.The comparisons show that the model scheme has the capacity to simulate complex flows in shallow water with reasonable accuracy and reliability.

Numerical analysis of flow separation zone in a confluent meander bend channel

The flow pattern in the confluent meander bend channel under the conditions of different discharge ratios and junction angles is numerically simulated by means of the large eddy simulation（LES）, and the characteristics of the flow separation zone are analyzed. Numerical results are well validated by experimental data with a good agreement. Analysis of the vertical confinement shows that the turbulence within the separation zone can be characterized as quasi-2-D. Details of the separation zone characteristics are revealed as shown by mean velocity isolines. According to the analysis of numerical results, the length and the width of the separation zone generally increase with the increase of the discharge ratio and the junction angle. However, the width of the separation zone keeps substantially constant when the junction angle increases from 60 o to90o. The dimensionless shape of the separation zone is nearly the same for three discharge ratios and three junction angles. The formulas of the relative width and the relative length of the separation zone are obtained by means of the polynomial fit method.

Numerical study of the flow in the Yellow River with non-monotonous banks

A 2-D depth averaged RNG k- ε model is developed to simulate the flow in a typical reach of the Upper Yellow River with non-monotonic banks. In order to take account of the effect of the secondary flow in a bend, the momentum equations are modified by adding an additional source term. A comparison between the numerical simulation and the field measurements indicates that the improved 2-D depth averaged RNG k- ε model can improve the accuracy of the numerical simulation. An arc spline interpolation method is developed to interpolate the non-monotonic river banks. The method can also be reasonably applied for the 2-D interpolation of the river bed level. Through a comparison of the water surface gradients simulated in the seven bends of the studied reach, some analytical formulae are improved to reasonably calculate the longitudinal and transverse gradients in meandering river reaches. Furthermore, the positions of the maximum water depth and the maximum velocity in a typical bend are discussed.