一种基于三角数分解的可配置2-D卷积器优化方法

多尺寸2-D卷积通过特征提取在检测、分类等计算机视觉任务中发挥着重要作用。然而,目前缺少一种高效的可配置2-D卷积器设计方法,这限制了卷积神经网络(CNN)模型在边缘端的部署和应用。该文基于乘法管理以及奇平方数的三角数分解方法,提出一种高性能、高适应性的卷积核尺寸可配置的2-D卷积器。所提2-D卷积器包含一定数量的处理单元(PE)以及相应的控制单元,前者负责运算任务,后者负责管理乘法运算的组合,二者结合以实现不同尺寸的卷积。具体地,首先根据应用场景确定一个奇数列表,列表中为2-D卷积器所支持的尺寸,并利用三角数分解得到对应的三角数列表;其次,根据三角数列表和计算需求,确定PE的总数量;最后,基于以小凑大的方法,确定PE的互连方式,完成电路设计。该可配置2-D卷积器通过Verilog硬件描述语言(HDL)设计实现,由Vivado 2 022.2在XCZU7EG板卡上进行仿真和分析。实验结果表明,相比同类方法,该文所提可配置2-D卷积器,乘法资源利用率得到显著提升,由20%~50%提升至89%,并以514个逻辑单元实现1 500 MB/s的吞吐率,具有广泛的适用性。

Contrast between 2D inversion and 3D inversion based on 2D high-density resistivity data

The 2D data processing adopted by the high-density resistivity method regards the geological structures as two degrees, which makes the results of the 2D data inversion only an approximate interpretation;the accuracy and effect can not meet the precise requirement of the inversion. Two typical models of the geological bodies were designed, and forward calculation was carried out using finite element method. The forward-modeled profiles were obtained. 1% Gaussian random error was added in the forward models and then 2D and 3D inversions using a high-density resistivity method were undertaken to realistically simulate field data and analyze the sensitivity of the 2D and 3D inversion algorithms to noise. Contrast between the 2D and 3D inversion results of least squares inversion shows that two inversion results of high-density resistivity method all can basically reflect the spatial position of an anomalous body. However, the 3D inversion can more effectively eliminate the influence of interference from Gaussian random error and better reflect the distribution of resistivity in the anomalous bodies. Overall, the 3D inversion was better than 2D inversion in terms of embodying anomalous body positions, morphology and resistivity properties.

基于二萘并[2,3-B∶2′,3′-D]呋喃基团的高效窄发射蓝光OLED器件

高效率窄光谱蓝色有机电致发光器件(OLED)是柔性显示领域的研究重点之一。本文以二萘并[2,3-B∶2′,3′-D]呋喃为弱电子受体、N-(4-联苯基)-1-萘胺作为电子给体设计合成了一种D-A-D型蓝光分子DPF-NA,其在正己烷溶液中的发射峰位于441 nm。理论计算与光物理测试结果显示DPF-NA具有杂化局域电荷转移激发态(HLCT)特性,兼具局域态(LE)高发光效率与电荷转移态(CT)高激子利用率特征,在二氯甲烷溶液中的光致发光量子效率(PLQY)为81.2%。基于质量分数3%DPF-NA掺杂浓度的OLED器件电致发光(EL)峰位于455 nm,半峰宽(FWHM)仅为26 nm,CIE(x,y)坐标为(0.14,0.08),最大外量子效率(EQEmax)为6.76%。

New 4-imino-4H-Chromeno[2,3-d]Pyrimidin-3(5H)-Amine: Synthesis, Cytotoxic Effects on Tumoral Cell Lines and in Silico ADMET Properties

The synthesis of new 4-imino-4H-chromeno[2,3-d]pyrimidin-3(5H)-amine in four steps including one step under microwave dielectric heating is reported. The structural identity of the synthesized compounds was established according to their spectroscopic analysis, such as FT-IR, NMR and mass spectroscopy. These new compounds were tested for their antiproliferative activities on seven representative human tumoral cell lines (Huh7 D12, Caco2, MDA-MB231, MDA-MB468, HCT116, PC3 and MCF7) and also on fibroblasts. Among them, only the compounds 6c showed micromolar cytotoxic activity on tumor cell lines (1.8 50 50 > 25 μM). Finally, in silico ADMET studies ware performed to investigate the possibility of using of the identified compound 6c as potential anti-tumor compound.

2-D Modeling and Calculations of Stratospheric Ozone and Influences of Convection, Diffusion, and Time

An engineering system approach of 2-D cylindrical model of transient mass balance calculations of ozone and other concerned chemicals along with fourteen photolysis, ozone-generating and ozone-depleting chemical reaction equations was developed, validated, and used for studying the ozone concentrations, distribution and peak of the layer, ozone depletion and total ozone abundance in the stratosphere. The calculated ozone concentrations and profile at both the Equator and a 60˚N location were found to follow closely with the measured data. The calculated average ozone concentration was within 1% of the measured average, and the deviation of ozone profiles was within 14%. The monthly evolution of stratospheric ozone concentrations and distribution above the Equator was studied with results discussed in details. The influences of slow air movement in both altitudinal and radial directions on ozone concentrations and profile in the stratosphere were explored and discussed. Parametric studies of the influences of gas diffusivities of ozone DO3 and active atomic oxygen DO on ozone concentrations and distributions were also studied and delineated. Having both influences through physical diffusion and chemical reactions, the diffusivity (and diffusion) of atomic oxygen DO was found to be more sensitive and important than that of ozone DO3 on ozone concentrations and distribution. The 2-D ozone model present in this paper for stratospheric ozone and its layer and depletion is shown to be robust, convenient, efficient, and executable for analyzing the complex ozone phenomena in the stratosphere. .

2-D crustal structure of Changbaishan-Tianchi volcanic region determined by seismic traveltime inversion

2-D velocity structure and tectonics of the crust and upper mantle is revealed by inversion of seismic refraction and wide-angle reflection traveltimes acquired along the profile L1 in the Changbaishan-Tianchi volcanic region. It is used in this study that seismic traveltime inversion for simultaneous determination of 2-D velocity and interface structure of the crust and upper mantle. The result shows that, under Changbaishan-Tianchi crater, there exists a low-velocity body in the shape of an inverted triangle, and the crustal reflecting boundaries and Moho all become lower by a varying margin of 2-6 km, forming a crustal root which is assumed to be the Changbaishan-Tianchi volcanic system. Finally, we make a comparison between our 2-D velocity model and the result from the studies by using trial-and-error forward modeling with SEIS83.

Comparison of different inversion methods of D-T_(2)two-dimensional nuclear magnetic resonance logging and applicability analysis

D-T_(2)two-dimensional nuclear magnetic resonance(2D NMR)logging technology can distinguish pore fluid types intuitively,and it is widely used in oil and gas exploration.Many 2D NMR inversion methods(e.g.,truncated singular value decomposition(TSVD),Butler-Reds-Dawson(BRD),LM-norm smoothing,and TIST-L1 regularization methods)have been proposed successively,but most are limited to numerical simulations.This study focused on the applicability of different inversion methods for NMR logging data of various acquisition sequences,from which the optimal inversion method was selected based on the comparative analysis.First,the two-dimensional NMR logging principle was studied.Then,these inversion methods were studied in detail,and the precision and computational efficiency of CPMG and diffusion editing(DE)sequences obtained from oil-water and gas-water models were compared,respectively.The inversion results and calculation time of truncated singular value decomposition(TSVD),Butler-Reds-Dawson(BRD),LM-norm smoothing,and TIST-L1 regularization were compared and analyzed through numerical simulations.The inversion method was optimized to process SP mode logging data from the MR Scanner instrument.The results showed that the TIST-regularization and LM-norm smoothing methods were more accurate for the CPMG and DE sequence echo trains of the oil-water and gas-water models.However,the LM-norm smoothing method was less time-consuming,making it more suitable for logging data processing.A case study in well A25 showed that the processing results by the LM-norm smoothing method were consistent with GEOLOG software.This demonstrates that the LM-norm smoothing method is applicable in practical NMR logging processing.

Effect of lateral heterogeneity on 2-D Rayleigh wave ZH ratio sensitivity kernels based on the adjoint method: Synthetic and inversion examples

The ratio between vertical and radial amplitudes of Rayleigh waves(hereafter,the Rayleigh wave ZH ratio)is an important parameter used to constrain structures beneath seismic stations.Some previous studies have explored crust and upper mantle structures by joint inversion of the Rayleigh wave ZH ratio and surface wave dispersion.However,all these studies have used a 1-D depth sensitivity kernel,and this kernel may lack precision when the structure varies a great deal laterally.Here,we present a systematic investigation of the two-dimensional(2-D)Rayleigh wave ZH ratio kernel based on the adjoint-wavefield method and perform two synthetic tests using the new kernel.The 2-D ZH ratio kernel is consistent with the traditional 1-D sensitivity kernel but has an asymmetric pattern with a preferred orientation toward the source.The predominant effect caused by heterogeneity can clearly be seen from kernels calculated from models with 2-D heterogeneities,which confirms the necessity of using the new 2-D kernel in some complex regions.Inversion tests using synthetic data show that the 2-D ZH ratio kernel has the potential to resolve small anomalies as well as complex lateral structures.

基于OCO-2卫星数据的中国CO_(2)浓度时空变化特征

大气CO_(2)浓度增加引起的全球变暖问题是国内外学者关注的热点议题,但对CO_(2)的监测一直存在较多的不确定性。利用2015—2022年OCO-2卫星观测的CO_(2)柱浓度混合比数据(XCO_(2)),基于克里金插值和标准差椭圆等方法,分析了中国CO_(2)浓度时空分布与变化特征,有以下3个结论。1)基于OCO-2卫星数据的XCO_(2)数据集精度较高,与地面监测站(瓦里关站、鹿林站)观测结果的均方根误差仅为1.75 ppm和1.58 ppm,相关系数分别为0.91和0.96。2)年际上,2015—2022年中国年均XCO_(2)由399.52 ppm增至417.64 ppm,年均增速为2.56 ppm/a,高于过去10年全球CO_(2)浓度平均增速(2.06 ppm/a),但在2019年之后XCO_(2)增速呈下降趋势。季节上,XCO_(2)具有明显的季节变化特征,春季XCO_(2)最高,夏季最低。3)空间分布上,XCO_(2)表现出东部高,西部、东北地区低的空间分布特征。XCO_(2)浓度高值区域集中在京津冀和长三角等城市群。中国东北、西南地区XCO_(2)增速较快,高于华东、华南等经济发达地区。

基于Sentinel-2多光谱遥感影像的小浪底水质反演

多光谱遥感技术可根据遥感波段信息反演水质参数,降低监测成本,提高监测速度和质量,为大范围水环境监测提供了一种新的方法。通过分析小浪底水库的Sentinel-2多光谱影像以及采样点实测水质数据,建立了最佳光谱波段的水质参数反演模型,对小浪底水库的化学需氧量(COD)、总磷(TP)、总氮(TN)和氨氮(NH_3-N)进行了遥感反演,验证了反演模型的精确度和稳定性,并反演了各水质参数的空间分布规律。结果表明:在4种水质参数反演模型中,COD模型精确度和稳定性最高,其次是TP、TN,最低的是NH_3-N,水库出水口和部分边缘COD质量浓度较高,水库中心TN、TP和NH_3-N质量浓度高于边缘处。

Two-dimensional inversion of spectral induced polarization data using MPI parallel algorithm in data space

Traditional two-dimensional（2D） complex resistivity forward modeling is based on Poisson＇s equation but spectral induced polarization（SIP） data are the coproducts of the induced polarization（IP） and the electromagnetic induction（EMI） effects.This is especially true under high frequencies,where the EMI effect can exceed the IP effect.2D inversion that only considers the IP effect reduces the reliability of the inversion data.In this paper,we derive differential equations using Maxwell＇s equations.With the introduction of the Cole-Cole model,we use the finite-element method to conduct2 D SIP forward modeling that considers the EMI and IP effects simultaneously.The data-space Occam method,in which different constraints to the model smoothness and parametric boundaries are introduced,is then used to simultaneously obtain the four parameters of the Cole-Cole model using multi-array electric field data.This approach not only improves the stability of the inversion but also significantly reduces the solution ambiguity.To improve the computational efficiency,message passing interface programming was used to accelerate the 2D SIP forward modeling and inversion.Synthetic datasets were tested using both serial and parallel algorithms,and the tests suggest that the proposed parallel algorithm is robust and efficient.

Centimeter-sized Cs_(3)Cu_(2)I_(5)single crystals grown by oleic acid assisted inverse temperature crystallization strategy and their films for high-quality X-ray imaging

Low-dimensional halide perovskites have become the most promising candidates for X-ray imaging,yet the issues of the poor chemical stability of hybrid halide perovskite,the high poisonousness of lead halides and the relatively low detectivity of the lead-free halide perovskites which seriously restrain its commercialization.Here,we developed a solution inverse temperature crystal growth(ITCG)method to bring-up high quality Cs_(3)Cu_(2)I_(5)crystals with large size of centimeter order,in which the oleic acid(OA)is introduced as an antioxidative ligand to inhibit the oxidation of cuprous ions effieiently,as well as to decelerate the crystallization rate remarkalby.Based on these fine crystals,the vapor deposition technique is empolyed to prepare high quality Cs_(3)Cu_(2)I_(5)films for efficient X-ray imaging.Smooth surface morphology,high light yields and short decay time endow the Cs_(3)Cu_(2)I_(5)films with strong radioluminescence,high resolution(12 lp/mm),low detection limits(53 nGyair/s)and desirable stability.Subsequently,the Cs_(3)Cu_(2)I_(5)films have been applied to the practical radiography which exhibit superior X-ray imaging performance.Our work provides a paradigm to fabricate nonpoisonous and chemically stable inorganic halide perovskite for X-ray imaging.

ICESat-2水深提取方法及其反演应用

相比于传统水深测量方法,结合主动激光卫星ICESat-2数据与被动光学遥感影像的主被动融合水深反演方法具有低成本、覆盖面积广、不受地域限制、无需地面实测数据等优点.研究选取澳大利亚大堡礁中部的John Brewer Reef和南部的Fitzroy Reef为实验区,开展主被动融合水深反演实验.针对ICESat-2光子点群信噪比低、光子点水深信息提取和改正难的问题,本文提出基于光子点群高斯分布特征的海面光子点群提取方法和基于深度自适应DBSCAN的海底光子点群提取方法,并顾及海面倾斜引起的入射角偏移,改进了Parrish水体折射改正几何模型.实验表明,基于光子点群高斯分布特征的海面光子点群提取方法和基于深度自适应DBSCAN的海底光子点群提取方法可以高效准确地提取出有效的海面、海底光子点群;经过地球物理改正和基于改进模型的水体折射改正后,水深变浅,且改正项与改正前水深呈线性关系,线性系数约为-0.2550.实验将提取并改正后的ICESat-2光子点水深与经大气校正、耀斑校正、空间域滤波等预处理后的Sentinel-2影像进行空间匹配构建水深反演样本集,并利用单波段模型(SB)、比值模型(BR)、Lyzenga多项式模型(LP)、二次多项式模型(QP)、三次多项式模型(CP)、支持向量回归模型(SVR)、多层感知器模型(MLP)、随机森林回归模型(RF)等水深反演模型对实验区全域水深进行反演.通过对比分析多种水深反演模型在不同地理区域和ICESat-2水深样本分布条件下的表现,研究为不同场景下的主被动融合水深反演策略提供了一定的科学依据.

基于Sentinel-2影像的黄河南岸典型改良示范区土壤含盐量反演模型

土壤盐渍化严重制约农田土壤环境的循环发展,高效准确地监测土壤盐分动态变化对盐碱地改良利用具有重要意义。为及时、有效地监测盐渍化土壤含盐量,以内蒙古黄河南岸灌区的4个典型盐碱化耕地改良示范区为例,利用Sentinel-2多光谱遥感影像,同步采集示范区内表层土壤的含盐量数据,通过相关性分析筛选敏感光谱指标,基于偏最小二乘回归(PLSR)、逐步回归(SR)、岭回归(RR)3种简单机器学习模型和深度学习Transformer模型建模,最后进行精度评价并优选出最佳含盐量反演模型。结果表明:示范区土壤反射率的可见光、红边、近红外波段反射率均与土壤含盐量呈正相关,短波红外波段反射率与土壤含盐量呈负相关,引入光谱指数能够有效提升Sentinel-2遥感影像与示范区表层土壤含盐量的相关性(相关系数绝对值不小于0.32);对比不同模型发现深度学习Transformer模型优于简单机器学习模型,验证集决定系数R~2和均方根误差(RMSE)分别为0.546和2.687 g/kg;含盐量反演结果与实地结果相吻合,为更精准反演内蒙古黄河南岸灌区盐渍化程度提供了参考。

A phase inversion based sponge-like polysulfonamide/SiO_2 composite separator for high performance lithium-ion batteries

In this work,a sponge-like polysulfonamide(PSA)/SiO_2 composite membrane is unprecedentedly prepared by the phase inversion method,and successfully demonstrated as a novel separator of lithium-ion batteries(LIBs).Compared to the commercial polypropylene(PP) separator,the sponge-like PSA/SiO_2 composite possesses better physical and electrochemical properties,such as higher porosity,ionic conductivity,thermal stability and flame retarding ability.The LiCoO_2/Li half-cells using the sponge-like composite separator demonstrate superior rate capability and cyclability over those using the commercial PP separator.Moreover,the sponge-like composite separator can ensure the normal operation of LiCoO_2/Li half-cell at an extremely high temperature of 90 °C,while the commercial PP separator cannot.All these encouraging results suggest that this phase inversion based sponge-like PSA/SiO_2 composite separator is really a promising separator for high performance LIBs.

Early Diagnosis of Recurrent Optic Neuritis Using Contrast-Enhanced T2 Fluid-attenuated Inversion Recovery Imaging：a Case Report

The diagnosis of the recurrent optic neuritis is commonly established clinically,and sometimes it could be challenging because the involved optic nerve does not always show significant enhancement on conventional contrast enhanced-T1 weighted imaging（CE-T1W1）.In this paper,we reported a middle-aged female with early diagnosis of recurrent optic neuritis using contrast-enhanced T2 fluid-attenuated inversion recovery imaging（CET2FLAIR）.The involved optic nerve presented evident enhancement on CE-T2FLAIR and no enhancement on CE-T1W1.This case suggested that the CE-T2FLAIR may be a useful diagnostic tool specifically for the recurrent optic neuritis in clinical practice.

基于GF-1卫星遥感反演排水河沟水体溶存N_(2)O浓度模型对比研究

[目的]探究利用GF-1卫星数据反演水体溶存氧化亚氮(N_(2)O)浓度的可行性,为实现低成本、高效率的水质实时监测提供有效途径。[方法]以宁夏青铜峡灌区第1和第5排水河沟为研究对象,选取与排水河沟水体溶存N_(2)O浓度相关性高的GF-1卫星影像波段反射率和水质参数作为自变量,通过最优子集筛选法确定最优自变量组合,分别构建了多元线性回归、BP神经网络和支持向量机模型,对水体溶存N_(2)O浓度进行预测对比。[结果]水温(T)、溶解性有机碳(DOC)等是影响水体溶存N_(2)O浓度的主要因素,同时近红外(NIR)等卫星波段与水体溶存N_(2)O浓度变化趋势显著相关。当自变量包括T,NIR等7个因素时,模型预测效果最佳。在3种模型中,BP神经网络模型验证结果R^(2)为0.64,具有最高预测精度。[结论]GF-1卫星数据以及水质参数与水体溶存N_(2)O浓度存在复杂的相关性关系,且BP神经网络能够实现利用GF-1卫星数据较高精度地反演水体溶存N_(2)O浓度。

2-CPR/RPU并联机构的构型设计及工作性能分析

针对当前物流领域中货件品类多、人工耗用高等问题,为满足产线快速分拣的需求,提出一种全周自由度的2-CPR/RPU并联机构,以提高物流货件的分拣效率,减少人力时间成本。绘制2-CPR/RPU机构的三维模型,采用螺旋理论对2-CPR/RPU机构自由度进行求解,并根据修正的Grübler-Kutzbach公式进行验证,通过封闭矢量对机构支链进行位置逆解分析,基于逆解表达式求得机构速度Jacobian矩阵,利用代数法分析奇异位形是否存在,编程MATLAB语言求解其符合工作范围的点并绘制出工作空间,最后对机构的承重量进行有限元仿真分析。结果表明:2-CPR/RPU并联机构具有共3个自由度,可实现2T1R型的运动(沿x、z轴的平移和绕x轴的转动);结构尺寸符合要求没有奇异位形,工作空间较大,均匀分布且呈扇形对称,执行平台转动可达60°;2-CPR/RPU并联机构结构简单且运动稳定,工作精度高、载重性能良好,适用于大部分物流包装产线的分拣装箱工作。

Numerical estimation of choice of the regularization parameter for NMR T2 inversion

Nuclear Magnetic inversion is the basis of NMR Resonance （NMR） T2 logging interpretation. The regularization parameter selection of the penalty term directly influences the NMR T2 inversion result. We implemented both norm smoothing and curvature smoothing methods for NMR T2 inversion, and compared the inversion results with respect to the optimal regular- ization parameters （（Xopt） which were selected by the dis- crepancy principle （DP）, generalized cross-validation （GCV）, S-curve, L-curve, and the slope of L-curve methods, respectively. The numerical results indicate that the DP method can lead to an oscillating or oversmoothed solution which is caused by an inaccurately estimated noise level. The （Xopt selected by the L-curve method is occa- sionally small or large which causes an undersmoothed or oversmoothed T2 distribution. The inversion results from GCV, S-curve and the slope of L-curve methods show satisfying inversion results. The slope of the L-curve method with less computation is more suitable for NMR T2 inversion. The inverted T2 distribution from norm smoothing is better than that from curvature smoothing when the noise level is high.

一种高速2-D滑动FFT的设计实现

文章介绍了采用2-D快速傅里叶变换(fast Fourier transform,FFT)算法的滑动窗FFT的基本特性原理和硬件实现过程,完成了窗长256点、步长16点的2-D滑动窗FFT的专用集成电路(application specific integrated circuit,ASIC)设计。传统FFT算法受序列完整性的制约,时滞较大,无法满足某些高实时性信号分析领域的处理速度要求。该文采用滑动FFT算法,克服了传统FFT对序列完整性的依赖,设计的滑动FFT处理器使用2-D FFT压缩新序列计算时间,以基16蝶形运算器为核心,采用系数复用和高基Booth方法优化系数编码技术压缩乘法器的数量,减少电路面积。所设计的2-D滑动FFT完成单次滑动窗长的计算时间比传统算法节约了16.1%,变换结果与MATLAB的运算结果相比,信噪比(signal-to-noise ratio,SNR)大于130 dB。在TSMC 28 nm的工艺下,工作主频为600 MHz,面积为1980μm×2060μm。