一种基于三角数分解的可配置2-D卷积器优化方法

多尺寸2-D卷积通过特征提取在检测、分类等计算机视觉任务中发挥着重要作用。然而,目前缺少一种高效的可配置2-D卷积器设计方法,这限制了卷积神经网络(CNN)模型在边缘端的部署和应用。该文基于乘法管理以及奇平方数的三角数分解方法,提出一种高性能、高适应性的卷积核尺寸可配置的2-D卷积器。所提2-D卷积器包含一定数量的处理单元(PE)以及相应的控制单元,前者负责运算任务,后者负责管理乘法运算的组合,二者结合以实现不同尺寸的卷积。具体地,首先根据应用场景确定一个奇数列表,列表中为2-D卷积器所支持的尺寸,并利用三角数分解得到对应的三角数列表;其次,根据三角数列表和计算需求,确定PE的总数量;最后,基于以小凑大的方法,确定PE的互连方式,完成电路设计。该可配置2-D卷积器通过Verilog硬件描述语言(HDL)设计实现,由Vivado 2 022.2在XCZU7EG板卡上进行仿真和分析。实验结果表明,相比同类方法,该文所提可配置2-D卷积器,乘法资源利用率得到显著提升,由20%~50%提升至89%,并以514个逻辑单元实现1 500 MB/s的吞吐率,具有广泛的适用性。

基于离散2-D小波多级分解的电容器外观缺陷视觉检测方法

电容器外观破损、凸起等缺陷直接影响器件的生产质量。目前电容器微小外观缺陷检测难度较大,导致视觉检测效率较低。为此提出了基于离散2-D小波多层分解的电容器外观缺陷视觉检测方法。采用同态滤波处理去除光照对电容器外观视觉检测结果的影响。利用像素点灰度值确定图像边缘点位置,提取电容器外观缺陷区域。应用离散2-D小波分解的方法对其展开多级分解。再差分统计电容器图像的外观缺陷纹理特征。将特征输入Mahalanobis分类器中,完成电容器外观缺陷视觉检测。仿真结果表明,所提方法可以较好检测电容的各种缺陷,召回率最低值是94.9%,误检率最高值为9.8%,漏检率均在10%以内,电容器缺陷检测效果较好。

2,4-D处理对欧李果实钙摄取的影响及与有机酸代谢和IAA的关系

为探究外源植物生长调节剂2,4-D处理对欧李(Cerasus humilis)果实发育成熟过程中钙素摄取能力的影响及与有机酸代谢、生长素(IAA)之间的关系,以内蒙古地区的低钙欧李MY-9果实为试材,以清水喷施作为对照,研究2,4-D处理对果实发育成熟过程中钙摄取能力和有机酸代谢及IAA的影响,并进行相关性分析。结果表明(:1)在摄钙速率方面,处理与对照果实的果胶钙、活性钙、总钙的摄钙速率变化规律相似,均表现为先升后降,处理后从硬核期到完熟期以上3种钙的摄取速率均显著高于对照;而水溶钙摄钙速率与其相反,表现为先降后升,果实发育后期显著高于对照。在摄钙活性方面,4种钙形态的变化规律相似,均表现为持续下降,处理后果实的摄钙活性均显著高于对照。在相对生长钙摄取量方面,4种钙形态的变化规律一致,均表现为先升后降,硬熟期和完熟期处理显著高于对照。(2)处理与对照果实中苹果酸脱氢酶(NAD-MDH)活性、苹果酸及有机酸含量随着果实发育成熟均呈上升趋势,苹果酸酶(NADP-ME)活性和柠檬酸含量均呈下降趋势,2,4-D处理可以不同程度提高果实中有机酸含量及相关酶活性。(3)处理与对照果实的IAA含量整体上均表现为先升后降,整个发育时期处理与对照均存在显著差异,2,4-D处理可显著提升欧李果实IAA含量。(4)相关性分析表明,水溶钙的摄钙速率和相对生长钙摄取量与NAD-MDH活性、苹果酸及有机酸含量均呈显著正相关,与IAA含量、NADP-ME活性及柠檬酸含量呈显著负相关;果胶钙、活性钙及总钙的摄钙活性与IAA含量、NADP-ME活性、柠檬酸含量呈显著正相关,与NAD-MDH活性、苹果酸及有机酸呈显著负相关;2,4-D处理提升了果实钙摄取能力与柠檬酸含量的相关性。综上所述,2,4-D处理可以提高欧李果实中钙摄取能力,提高有机酸代谢及IAA含量;欧李果实中钙摄取能力与有机酸代谢及IAA含量密切相关,随着NAD-MDH活性增强,苹果酸含量增加,有机酸含量增加,会提高水溶钙摄取能力,但会降低果胶钙、活性钙及总钙的摄取能力;而柠檬酸及IAA含量的增加会降低水溶钙摄取能力,提高果胶钙、活性钙及总钙摄取能力。2,4-D处理通过提高有机酸代谢及IAA含量调控果实钙摄取。

基于二萘并[2,3-B∶2′,3′-D]呋喃基团的高效窄发射蓝光OLED器件

高效率窄光谱蓝色有机电致发光器件(OLED)是柔性显示领域的研究重点之一。本文以二萘并[2,3-B∶2′,3′-D]呋喃为弱电子受体、N-(4-联苯基)-1-萘胺作为电子给体设计合成了一种D-A-D型蓝光分子DPF-NA,其在正己烷溶液中的发射峰位于441 nm。理论计算与光物理测试结果显示DPF-NA具有杂化局域电荷转移激发态(HLCT)特性,兼具局域态(LE)高发光效率与电荷转移态(CT)高激子利用率特征,在二氯甲烷溶液中的光致发光量子效率(PLQY)为81.2%。基于质量分数3%DPF-NA掺杂浓度的OLED器件电致发光(EL)峰位于455 nm,半峰宽(FWHM)仅为26 nm,CIE(x,y)坐标为(0.14,0.08),最大外量子效率(EQEmax)为6.76%。

New 4-imino-4H-Chromeno[2,3-d]Pyrimidin-3(5H)-Amine: Synthesis, Cytotoxic Effects on Tumoral Cell Lines and in Silico ADMET Properties

The synthesis of new 4-imino-4H-chromeno[2,3-d]pyrimidin-3(5H)-amine in four steps including one step under microwave dielectric heating is reported. The structural identity of the synthesized compounds was established according to their spectroscopic analysis, such as FT-IR, NMR and mass spectroscopy. These new compounds were tested for their antiproliferative activities on seven representative human tumoral cell lines (Huh7 D12, Caco2, MDA-MB231, MDA-MB468, HCT116, PC3 and MCF7) and also on fibroblasts. Among them, only the compounds 6c showed micromolar cytotoxic activity on tumor cell lines (1.8 50 50 > 25 μM). Finally, in silico ADMET studies ware performed to investigate the possibility of using of the identified compound 6c as potential anti-tumor compound.

2-D Modeling and Calculations of Stratospheric Ozone and Influences of Convection, Diffusion, and Time

An engineering system approach of 2-D cylindrical model of transient mass balance calculations of ozone and other concerned chemicals along with fourteen photolysis, ozone-generating and ozone-depleting chemical reaction equations was developed, validated, and used for studying the ozone concentrations, distribution and peak of the layer, ozone depletion and total ozone abundance in the stratosphere. The calculated ozone concentrations and profile at both the Equator and a 60˚N location were found to follow closely with the measured data. The calculated average ozone concentration was within 1% of the measured average, and the deviation of ozone profiles was within 14%. The monthly evolution of stratospheric ozone concentrations and distribution above the Equator was studied with results discussed in details. The influences of slow air movement in both altitudinal and radial directions on ozone concentrations and profile in the stratosphere were explored and discussed. Parametric studies of the influences of gas diffusivities of ozone DO3 and active atomic oxygen DO on ozone concentrations and distributions were also studied and delineated. Having both influences through physical diffusion and chemical reactions, the diffusivity (and diffusion) of atomic oxygen DO was found to be more sensitive and important than that of ozone DO3 on ozone concentrations and distribution. The 2-D ozone model present in this paper for stratospheric ozone and its layer and depletion is shown to be robust, convenient, efficient, and executable for analyzing the complex ozone phenomena in the stratosphere. .

Surface characteristics analysis of fractures induced by supercritical CO_(2)and water through three-dimensional scanning and scanning electron micrography

Morphology of hydraulic fracture surface has significant effects on oil and gas flow,proppant migration and fracture closure,which plays an important role in oil and gas fracturing stimulation.In this paper,we analyzed the fracture surface characteristics induced by supercritical carbon dioxide(SC-CO_(2))and water in open-hole and perforation completion conditions under triaxial stresses.A simple calculation method was proposed to quantitatively analyze the fracture surface area and roughness in macro-level based on three-dimensional(3D)scanning data.In micro-level,scanning electron micrograph(SEM)was used to analyze the features of fracture surface.The results showed that the surface area of the induced fracture increases with perforation angle for both SC-CO_(2)and water fracturing,and the surface area of SC-CO_(2)-induced fracture is 6.49%e58.57%larger than that of water-induced fracture.The fractal dimension and surface roughness of water-induced fractures increase with the increase in perforation angle,while those of SC-CO_(2)-induced fractures decrease with the increasing perforation angle.A considerable number of microcracks and particle peeling pits can be observed on SC-CO_(2)-induced fracture surface while there are more flat particle surfaces in water-induced fracture surface through SEM images,indicating that fractures tend to propagate along the boundary of the particle for SC-CO_(2)fracturing while water-induced fractures prefer to cut through particles.These findings are of great significance for analyzing fracture mechanism and evaluating fracturing stimulation performance.

基于CT扫描的CO_(2)相变致裂煤裂隙演化特征

为进一步揭示CO_(2)相变致裂煤的裂隙改造机理,开展了CO_(2)相变致裂煤体实验,基于CT扫描和三维裂隙重构,分析了CO_(2)相变致裂前后的煤样内部裂隙结构参数,查明了CO_(2)相变致裂煤的三维裂隙结构演化特征。结果表明,致裂后煤样的裂隙总数量减少,裂隙总体积和裂隙总表面积增加;CO_(2)相变致裂产生了裂隙扩张转化效应,在致裂压力的扩张作用下,小尺度裂隙转化为更大尺度的裂隙;长度小于1000μm的裂隙数量减少、裂隙体积和表面积明显减小,长度大于1000μm的裂隙体积和表面积明显增大,且裂隙之间扩张贯通而引起其数量减少;CO_(2)相变致裂大幅度改善了煤体三维裂隙的连通性,有利于气体的运移和产出。此研究为CO_(2)相变致裂效果提供新的分析评价方法,也可为其他非常规天然气储层及其改造的裂隙演化特征研究提供参考和借鉴。

基2-FFT输入分级截断算法在频域合成孔径超声成像中的研究

为提高超声频域成像算法的计算速度,提出一种应用于超声频域成像算法的基2-FFT输入分级截断算法。首先,借助于COMSOL多物理场仿真软件,建立钢件中含有孔缝缺陷的有限元模型进行声场仿真。仿真结果得到关于缺陷的回波信号,并通过PSM算法对频域内声场进行重建,得到成像区域的聚焦图像,和原始仿真信号的B扫图像相比效果更加直观且成像质量更好,验证了PSM算法的可行性。然后为了避免超声频域成像算法中二维傅里叶变换的冗余计算,进一步提出了支持任意非0值输入的基2-FFT输入分级截断算法。实验结果证明,基2-FFT输入分级截断算法比标准基2-FFT算法快27%,超声频域算法成像速度提高13%。

An assessment of arctic sea ice concentration retrieval based on “HY-2” scanning radiometer data using field observations during CHINARE-2012 and other satellite instruments

A retrieval algorithm of arctic sea ice concentration （SIC） based on the brightness temperature data of “HY-2” scanning microwave radiometer has been constructed. The tie points of the brightness temperature were selected based on the statistical analysis of a polarization gradient ratio and a spectral gradient ratio over open water （OW）, first-year ice （FYI）, and multiyear ice （MYI） in arctic. The thresholds from two weather filters were used to reduce atmospheric effects over the open ocean. SIC retrievals from the “HY-2” radiom-eter data for idealized OW, FYI, and MYI agreed well with theoretical values. The 2012 annual SIC was calcu-lated and compared with two reference operational products from the National Snow and Ice Data Center （NSIDC） and the University of Bremen. The total ice-covered area yielded by the “HY-2” SIC was consistent with the results from the reference products. The assessment of SIC with the aerial photography from the fifth Chinese national arctic research expedition （CHINARE） and six synthetic aperture radar （SAR） images from the National Ice Service was carried out. The “HY-2” SIC product was 16% higher than the values de-rived from the aerial photography in the central arctic. The root-mean-square （RMS） values of SIC between “HY-2” and SAR were comparable with those between the reference products and SAR, varying from 8.57% to 12.34%. The “HY-2” SIC is a promising product that can be used for operational services.

Monitoring slope deformation using a 3-D laser image scanning system: a case study

An ILRIS-36D 3-D laser image scanning system was used to monitor the Anjialing strip mine slope on Pingshuo in Shanxi province. The basic working principles, performance indexes, features and data collection and processing methods are illus-trated. The point cloud results are analyzed in detail. The rescale range analysis method was used to analyze the deformation char-acteristics of the slope. The results show that the trend of slope displacement is stable and that the degree of landslide danger is low. This work indicates that 3-D laser image scanning can supply multi-parameter, high precision real time data over long distances. These data can be used to study the distortion of the slope quickly and accurately.

A preliminary assessment of the sea surface wind speed production of HY-2 scanning microwave radiometer

A scanning microwave radiometer（RM） was launched on August 16,2011,on board HY-2 satellite.The six-month long global sea surface wind speeds observed by the HY-2 scanning microwave radiometer are preliminarily validated using in-situ measurements and WindSat observations,respectively,from January to June 2012.The wind speed root-mean-square（RMS） difference of the comparisons with in-situ data is 1.89 m/s for the measurements of NDBC and 1.72 m/s for the recent four-month data measured by PY30-1 oil platform,respectively.On a global scale,the wind speeds of HY-2 RM are compared with the sea surface wind speeds derived from WindSat,the RMS difference of 1.85 m/s for HY-2 RM collocated observations data set is calculated in the same period as above.With analyzing the global map of a mean difference between HY-2 RM and WindSat,it appears that the bias of the sea surface wind speed is obviously higher in the inshore regions.In the open sea,there is a relatively higher positive bias in the mid-latitude regions due to the overestimation of wind speed observations,while the wind speeds are underestimated in the Southern Ocean by HY-2 RM relative to WindSat observations.

Possible Nodeless Superconducting Gaps in Bi_2Sr_2CaCu_2O_(8+δ) and YBa_2Cu_3O_(7-x) Revealed by Cross-Sectional Scanning Tunneling Spectroscopy

Pairing in the cuprate high-temperature superconductors and its origin remain among the most enduring mysteries in condensed matter physics. With cross-sectional scanning tunneling microscopy/spectroscopy, we clearly reveal the spatial-dependence or inhomogeneity of the superconducting gap structure of Bi2Sr2CaCu2O8＋δ （Bi2212） and YBa2Cu3O7-x （YBCO） along their c-axes on a scale shorter than the interlayer spacing. By tunneling into the （100） plane of a Bi2212 single crystal and a YBCO film, we observe both U-shaped tunneling spectra with extended fiat zero-conductance bottoms, and V-shaped gap structures, in different regions of each sample. On the YBCO film, tunneling into a （110） surface only reveals a U-shaped gap without any zero-bias peak. Our analysis suggests that the U-shaped gap is likely a nodeless superconducting gap. The V-shaped gap has a very small amplitude, and is likely proximity-induced by regions having the larger U-shaped gap.

一种高速2-D滑动FFT的设计实现

文章介绍了采用2-D快速傅里叶变换(fast Fourier transform,FFT)算法的滑动窗FFT的基本特性原理和硬件实现过程,完成了窗长256点、步长16点的2-D滑动窗FFT的专用集成电路(application specific integrated circuit,ASIC)设计。传统FFT算法受序列完整性的制约,时滞较大,无法满足某些高实时性信号分析领域的处理速度要求。该文采用滑动FFT算法,克服了传统FFT对序列完整性的依赖,设计的滑动FFT处理器使用2-D FFT压缩新序列计算时间,以基16蝶形运算器为核心,采用系数复用和高基Booth方法优化系数编码技术压缩乘法器的数量,减少电路面积。所设计的2-D滑动FFT完成单次滑动窗长的计算时间比传统算法节约了16.1%,变换结果与MATLAB的运算结果相比,信噪比(signal-to-noise ratio,SNR)大于130 dB。在TSMC 28 nm的工艺下,工作主频为600 MHz,面积为1980μm×2060μm。

Reformatted method for two-dimensional detector arrays measurement data in proton pencil beam scanning

The spatial resolution of a commercial two-dimensional(2D)ionization chamber(IC)array is limited by the size of the individual detector and the center-to-center distance between sensors.For dose distributions with areas of steep dose gradients,inter-detector dose values are derived by the interpolation of nearby detector readings in the conventional mathematical interpolation of 2D IC array measurements.This may introduce significant errors,particularly in proton spot scanning radiotherapy.In this study,by combining logfile-based reconstructed dose values and detector measurements with the Laplacian pyramid image blending method,a novel method is proposed to obtain a reformatted dose distribution that provides an improved estimation of the delivered dose distribution with high spatial resolution.Meanwhile,the similarity between the measured original data and the downsampled logfilebased reconstructed dose is regarded as the confidence of the reformatted dose distribution.Furthermore,we quantify the performance benefits of this new approach by directly comparing the reformatted dose distributions with 2D IC array detector mathematically interpolated measurements and original low-resolution measurements.The result shows that this new method is better than the mathematical interpolation and achieves gamma pass rates similar to those of the original low-resolution measurements.The reformatted dose distributions generally yield a confidence exceeding 95%.

2-D distributed pose estimation of multi-agent systems using bearing measurements

This article studies distributed pose(orientation and position)estimation of leader–follower multi-agent systems over𝜅-layer graphs in 2-D plane.Only the leaders have access to their orientations and positions,while the followers can measure the relative bearings or(angular and linear)velocities in their unknown local coordinate frames.For the orientation estimation,the local relative bearings are used to obtain the relative orientations among the agents,based on which a distributed orientation estimation algorithm is proposed for each follower to estimate its orientation.For the position estimation,the local relative bearings are used to obtain the position constraints among the agents,and a distributed position estimation algorithm is proposed for each follower to estimate its position by solving its position constraints.Both the orientation and position estimation errors converge to zero asymptotically.A simulation example is given to verify the theoretical results.

具有执行器饱和的切换2-D系统事件触发控制

针对具有执行器饱和的切换2-D连续离散系统,提出了一种基于多Lyapunov函数法的事件触发控制方案;为了减少通信资源浪费和执行器的损耗,提出了一种事件触发机制;该触发机制考虑了执行器饱和特性,只有当执行器未饱和,且满足事件触发条件时,控制器才会更新;利用凸组合技术和多Lyapunov函数法,提出了一种状态依赖的切换信号与状态反馈控制器的设计方法,并对闭环系统的指数稳定性进行了分析,利用线性矩阵不等式技术导出了控制器增益矩阵存在的充分条件;利用Darboux方程的仿真算例验证了所提出的事件触发控制方案的有效性,仿真结果表明了在所设计的控制方案下,闭环系统的状态是指数收敛的,同时还能减少通信资源的浪费。

小尺寸纳米颗粒的SEM高分辨成像模式探究——以Ni_(2)P为例

相比透射电子显微镜(TEM),扫描电子显微镜(SEM)具有批量进样、成本低、三维成像的优势,但小尺寸纳米颗粒在进行SEM成像时存在容易积碳、分辨率不足、形貌结构信息弱等技术难题。文章以超小空心(34.4 nm)、实心(13.3 nm)Ni_(2)P纳米颗粒为例,重点探究了如何通过调控工作模式、工作距离、加速电压、束流等参数获得分辨率高、形貌结构清晰的SEM图像。研究表明,高分辨模式下T2和超高分辨模式下T3探头所成二次电子(SE)像的分辨率明显优于标准模式下ETD探头的,且SE像表面形貌信息多、立体感较好。其中由于T3探头位置最高且仅收集高位二次电子信号,这部分二次电子信号进入透镜的角度准直且能量较低。因此超高分辨模式-T3探头所成SE像分辨率和信噪比最高、形貌衬度良好,但几乎观察不到颗粒内部结构。而高分辨和超高分辨模式下T1(背散射信号)探头所成BSE像成分衬度好,虽景深较小但最有利于观察空心结构。同时探究发现工作距离太小,所得SE像分辨率好但景深差,工作距离太大,SE像分辨率稍弱但景深较好。结合图像质量测量结果,对于文中的Ni_(2)P纳米颗粒,选择适中的工作距离(~8 mm)可获得质量较高的SE像。提升加速电压可有效提高图像分辨率(空心Ni_(2)P在30 kV下可达2.3 nm)。信噪比会随束流的增大而增强,其过大会导致颗粒边缘模糊,选择适中的束流(~0.2 nA)成像效果较好。以上研究结果对小尺寸及中空结构纳米颗粒的SEM成像选择具有一定的借鉴作用。

“探究2,4-D对插枝生根的作用”实验中因变量的确定

“探究2,4-D对插枝生根的作用”是浙科版高中生物学教材选择性必修1教材中的重要实验,实践中一些师生对该实验中的因变量常有疑惑,本文选择常见的碰碰香作为实验材料展开探究。发现2,4-D浓度在2.5×10-4—2.5×10-14g/L浓度范围内,对根的平均长度和根的总长度作用差异不明显,但是对根的数量有显著的差异。该探究可为师生提供一定的参考。

CO_(2)激光退火不同外径锗芯光纤的扫描速度研究

对内径为41~43μm,外径约为188μm、251μm和270μm的锗芯光纤进行激光退火实验,研究CO_(2)激光沿光纤轴向扫描速度对锗芯拉曼峰频率和光传输损耗特性的影响。研究发现,激光扫描速度是决定退火后光纤特性的重要参数。对不同外径的光纤,达到最优退火效果的激光扫描速度不同,188μm、251μm和270μm外径的锗芯光纤分别为10 mm·s^(-1)、14 mm·s^(-1)和16 mm·s^(-1),光传输损耗分别为3.435 dB·cm^(-1)、2.147 dB·cm^(-1)和3.578 dB·cm^(-1)。使用COMSOL软件对退火过程中纤芯表面固定点的温度变化进行了模拟仿真研究,仿真结果显示激光退火过程中温度呈脉冲形变化。相同外径条件下,激光扫描速度提高,温度脉冲的峰值升高、谷值降低、单脉冲持续时间缩短;相同扫描速度条件下,光纤外径减小,温度脉冲峰值提高,谷值降低。