Application of Bronsted acid ionic liquids as green catalyst in the synthesis of 2-propanol with reactive distillation

Five Br?nsted acidic ionic liquids(ILs) were prepared and characterized by FT-IR,~1H NMR and ^(13)C NMR. Their catalytic activities for the synthesis of 2-propanol(IPOH) via transesterification of isopropyl acetate(IPAc) with methanol(Me OH) were investigated. Among all the tested ILs, [Ps-mim]HSO_4 performed best and was used as catalyst for further studies. The reaction kinetics were carried out to correlate the parameters in a homogeneous second order kinetic model. It has been found that there is close agreement between the calculated and experimental values. The high-pressure batch reactive distillation experimental apparatus was set up in order to enhance the conversion of IPAc. A high conversion of IPAc of 99.4% was obtained under the optimal reaction conditions. The catalyst [Ps-mim]HSO_4 can be recycled easily by a rotary evaporator and reused without any further treatment. The catalyst had been repeatedly used for four times and no obvious changes in the structure of catalyst could be observed.

Highly efficient synthesis of 1-methoxy-2-propanol using ionic liquid catalysts in a micro-tubular circulating reactor

The catalysis of ionic liquids (ILs) in the traditional stirred reactor suffers from insufficient mass and heat transfer, which always needs a long reaction time and results in a low reaction rate. In this work, highly efficient synthesis of 1-methoxy-2-propanol via the alcoholysis reaction of propylene oxide (PO) with methanol was proposed and achieved by the combination of micro-tubular circulating reactor with the IL [N4444] [Buty] catalyst. Compared with the stirred reactor, the rate of alcoholysis reaction in a micro-tubular circulating reactor was found to be significantly improved. The reaction time was remarkably shortened to 20 min from 180 min as well as the yield of 1-methoxy-2-propanol reached 92%. Moreover, the kinetic study further demonstrated that the main reaction rate to 1-methoxy-2-propanol (K1) was about 20 times larger than the side reaction rate to byproduct 2-methoxy-1-propanol (K2) in the temperature range of 363–383 K. Such combination of micro-tubular circulating reactor with IL catalysts is believed to be a class of effective process intensification technique for highly efficient synthesis of 1-methoxy-2-propanol.

Correlation and Prediction of Salt Effect on Vapor Liquid Equilibrium for the System of 2-Propanol/Water

Binary vapor liquid equilibrium （VLE） data were measured for the systems of 2-propanol/ ethanediol and ethanediol/potassium acetate （KAc）. VLE data for the system of propanol/ethanediol was tested using thermodynamic consistency test. The average values of Ayj and A P were 0.0776 and 0.1542 kPa, respectively. The above two sets of VLE data were correlated with the NRTL model. Ternary VLE data for the system of 2-propanol/water/KAc was used to obtain the more suitable parameters of NRTL model for binary systems of 2-propanol/KAc and water/KAc （called TDCM）. For multicomponent systems, ternary and quaternary, the VLE values predicted by the NRTL model agreed well with the literature data. Influence of KAc, ethanediol, and the mixture of KAc and ethanediol on volatility between 2- propanol and water was investigated respectively. The results showed that the above-mentioned materials and mixture had different influence on volatility between 2-propanol and water. The method for correlation and prediction of salt-containing VLE is simple and effective for the said system.

Study on Excess Thermodynamic Parameters and Theoretical Estimation of Ultrasonic Velocity Using Scaled Particle Theory in Binary Liquid Mixtures of 2-Methyl-2-propanol and Nitriles at Different Temperatures

Density, ρ, ultrasonic speed, u, and viscosity, η, of binary mixtures of 2-methyl-2-propanol (2M2P) with acetonitrile (AN), propionitrile (PN) and butyronitrile (BN) including those of pure liquids are measured over the entire composition range at temperatures 298.15, 303.15 and 308.15 K. From these experimental data, the excess available volume, E a V , excess free volume, E f V , excess isothermal compressibility, E T β , excess thermal expansion coefficient, E α , and excess internal pressure, E i π , are calculated. The variation of these properties with composition and temperature are discussed in terms of molecular interactions between unlike molecules of the mixtures. It is found that the values of E a V , E f V , E T β and E α are positive and those of E i π are negative for all the mixtures at each temperature studied, indicating the presence of weak interactions between 2M2P and AN/PN/BN molecules. The variations of E a V , E f V , E T β , E α and E i π values with composition indicate that the interactions in these mixtures follow the order: AN<PN<BN, i.e., the 2M2P-nitrile interaction decreases with the increase of alkyl chain length in these nitrile molecules. In addition, the theoretical ultrasonic velocity is calculated using the scaled particle theory and compared with the experimental values.

Study of 2-Propanol Photocatalytic Degradation on Surface of Phase-Ratio-Controlled TiO_2 Nanoparticles

The crystal form of TiO_2 is a crucial focus of research on the photocatalytic degradation of gaseous pollutants by TiO_2-based composite photocatalysts. To explore the synergistic effect of mixed crystalline TiO_2 on gaseous organic-pollutant photocatalytic degradation, we synthesized a series of TiO_2 nanoparticles with controllable phase ratios. We explored the role of the TiO_2 phase ratio on the photocatalytic activity and degradation pathway in the photodegradation of 2-propanol(IPA). We estimated the crystallite size and crystal proportions of anatase and rutile by X-ray diffraction. We used the Brunauer-Emmett-Teller method to calculate the specific surface area and Fourier transform infrared spectroscopy to characterize the surface chemistry of the samples. Our results show the photocatalytic activities of pure anatase and the sample with 8.6% rutile to be much better than those of the samples with a phase junction and pure rutile. As such, anatase is the better option for the study of photodegradation design and preparation of gas-phase organic pollutants.

Stability and Refolding of Prophenol Oxidase Protein with 2-Propanol in Drosophila melanogaster

Phenol oxidase in Drosophila melanogaster occurs as folded phase precursors designated as prophenol oxidase A1 and A3, and prophenol oxidase is activated with alcohol, especially 2-propanol, within a few minutes as unfolded-phase in vitro. To clarify a common effect of alcohols on proteins and peptides, the extract containing prophenol oxidase protein was prepared. Phenol oxidase activity activated with 2-propanol has been maintained stable at least 24 hours remains as it is. Protein of prophenol oxidase was not denatured opposite hypnoses known as the instability of protein with alcohol. Activated prophenol oxidase with 2-propanol remain enzyme activity with no aggregation, stable, renaturation, and the refolding phenomena occurred around the active phase within the catalytic active center of prophenol oxidase protein in Drosophila melanogaster. This study is important to induce the wide range applications of the effect in many fields for rational drag design.

Catalytic Oxidative Conversion from Naphthol to 2-Hydroxy-1, 4-naphthoquinone over Iron Porphyrin Catalysts by Molecular Oxygen in an Alkaline 2-Propanol Solution

In an alkaline 2-propanol solution with 5,10,15,20-tetra(4-methoxyl phenyl) porphyrin iron chloride(TOMPPFeCl) as a catalyst and oxygen as a cheap green oxidant, 2-naphthol was conversed to 2-hydroxy-\{1,4-naphthoquinone(HNQ)\} with a yield of 62.17% and a selectivity of 100%, and the conversion number of TMOPPFeCl catalyst was 8.32/min. The catalytic oxidation products were characterized by means of UV-Vis, IR, GC-MS, ~ 1H NMR and melting point determination. In this catalytic oxidation, the catalytic activity of TMOPPFeCl was researched in detail and the reacting conditions were optimized. A possible reaction mechanism is summarized based on in situ EPR determination.

Measurement and Modeling of Vapor-Liquid Equilibrium for Ternary System Water+2-Propanol+1-Butyl-3-methylimidazolium Chloride

Vapor-liquid equilibrium(VLE)data for water+2-propanol+1-butyl-3-methylimidazolium chloride([bmim]Cl)were measured.Six sets of complete T,x,y data are reported,in which the 2-propanol mole fraction on IL-free basis is fixed separately at 0.1,0.2,0.4,0.6,0.8,and approximate 0.98,while the IL mass fraction is varied from 0.1 to 0.8,in an interval of 0.1.The non-random-two-liquid(NRTL)and electrolyte non-random-two-liquid(eNRTL)equations are used to correlate the experimental data with satisfactory results.The ternary VLE behavior is also modeled with the parameters obtained by correlating two data sets,in which the mole fraction of 2-propanol on IL-free basis is approximately 0.1 and 0.98.In this way,the six sets of data are reproduced satisfactorily.With the eNRTL model,the root-mean-square deviation for temperature is 0.82 K and that for vapor-phase mole fraction is 0.0078.The influences of IL on activity coefficients and relative volatility of the volatile components are also graphically illustrated.

A Computational Study on the Mechanism for the K_2CO_3-catalyzed Reaction of Carbon Dioxide and 1-Chlo-2-propanol

The microcosmic reaction mechanism of K2CO3-catalyzed 1-chlo-2-propanol and carbon dioxide has been investigated by density functional theory（DFT） at the GGA/PW91/DNP level.We optimize the geometric configurations of reactants,intermediates,transition states,and products.The energy analysis calculation approves the authenticity of intermediates and transition states.According to our calculations,four feasible reaction pathways are found.The main pathway of the reaction is ReA → IMA1 → TSA1 → IMA2 → IMA5 → TSA5 → P.Besides,we also in-vestigate the reaction mechanism of 1-chlo-2-propanol and carbon dioxide without K2CO3-catalyzation by the same theory and level.The computational results indicate that the activation barrier with K2CO3-catalyzed is smaller than the activation barrier without K2CO3-catalyzed.That is to say,K2CO3 can promote the reaction to give the product in a high yield,which is in agreement with the experimental results.

Acetone Formation from Photolysis of 2-Propanol on Anatase-TiO2（101）

Photocatalysis of 2-propanol on A-TiO2（101） has been investigated using a temperature programed desorption method with 266 nm laser light. A clear mechanism is proposed for photodissociation of 2-propanol on A-TiO2（101）. Acetone product on five coordinate Ti4＋ sites is formed in a stepwise manner in which the O-H dissociation proceeds first and then followed by secondary C-H dissociation of 2-propanol while H atoms are transferred to the adjacent bridge bond oxygen （BBO） sites. Low temperature water is formed in a thermally driven process via H-atom on BBO in exchange with isopropyl groups of molecule 2-propanol, while isopropyl radical desorbs at high temperature during the TPD process. The observation demonstrates the prospect of TiO2 as a photocatalyst for degradation of organics.

Study on Salt-Containing Extractive Distillation for the 2-Propanol/Water System

The salt-containing extractive distillation column and the salt-containing agent recovery column for the 2-propanol/water/ethanediol/KAc system were simulated by the NRTL model and the modified Rose Relaxation method. The simulation results showed that prediction of the salt effect in vapor-liquid equilibrium and the correlation method （TDCM） of NRTL parameters were suitable for the said system. Four different distillation technology processes were investigated; the results showed that the salt-containing extractive distillation process was the best one. The simulating design of the extractive distillation column was performed under the conditions of different total stage number, feeding location, reflux ratio, amount of mixed agent and concentration of KAc. The results showed that such factors as 17 stages, a feeding location at the 9th stage, a reflux ratio of 1.2, and a mixed agent feeding rate of 1.141 kmol/h, might be the best suited operating conditions. The simulating design was also done for the column for recovering the salt-containing agent. The simulation method of the salt-containing extractive distillation is simple and effective in this work.

Measurement and Correlation of Solubility for Propylene in 2-Propanol-Water Solutions

In order to obtain the solubility data of propylene in 2-propanol-water solutions, gas-liquid equilibrium (GLE) experiments were carried out at 303.15-333.15 K, 0.27-0.98 MPa in a static equilibrium still. The original mass ratio of 2-propanol to water was 9∶1,8∶2,7∶3,1∶0, respectively. The equilibrium data were correlated with an empirical model and the regression of model parameters was completed by Gauss-Newton nonlinear least square (NLS). The average relative deviation (ARD) between the experimental and calculated value is 1.570 0, and the maximum relative deviation (MRD) is 4.820 0. In addition, a simple approach that correlated the model parameters with the system composition was also provided.

Synthesis and Antifungal Activity of 1-(1H-1,2,4-Triazole)-2-(2,4-diflurophenyl)-3-(N-methyl-N-substituted benzylamino)-2-propanols

Eleven 1-(1H-1,2,4-triazole)-2-(2,4-diflurophenyl)-3-(N-methyl-N-substituted benzylamino)-2-propanols were designed and synthesized, on the basis of the crystal structure of P450 cytochrome 14α-sterol demethylase(CYP51) and the docking results of inhibitors to the active site of the enzyme. All title compounds were first by reported. Results of preliminary biological tests showed that most of title compounds exhibited activity against the seven common pathogenic fungi. Compound 11 showed best antifungal activity with broad antifungal spectrum and proved to be more active against Cryptococcus neoformans, Candida albicans, Microsporum lanosum and Trichophyton rubrum than ketoconazole. Compounds 3, 10 and 4 also had high activities.

Synthesis of graphene/tourmaline/TiO_2 composites with enhanced activity for photocatalytic degradation of 2-propanol

We report the construction of a graphene/tourmaline/TiO2(G/T/TiO2)composite system with enhanced charge‐carrier separation,and therefore enhanced photocatalytic properties,based on tailoring the surface‐charged state of graphene and/or by introducing an external electric field arising from tourmaline.A simple two‐step hydrothermal method was used to synthesize G/T/TiO2composites and poly(diallyldimethylammonium chloride)‐G/T/TiO2composites.In the photocatalytic degradation of2‐propanol(IPA),the catalytic activity of the composite containing negatively charged graphene was higher than of the composite containing positively charged graphene.The highest acetone evolution rate(223?mol/h)was achieved using the ternary composite with the optimum composition,i.e.,G0.5/T5/TiO2(0.5wt%graphene and5wt%tourmaline).The involvement of tourmaline and graphene in the composite is believed to facilitate the separation and transportation of electrons and holes photogenerated in TiO2.This synergetic effect could account for the enhanced photocatalytic activity of the G/T/TiO2composite.A mechanistic study indicated that O2??radicals and holes were the main reactive oxygen species in photocatalytic degradation of IPA.

Effect of （＋）-limonene and 1-methoxy-2-propanol on Ips typographus response to pheromone blends

We compared two different strategies to increase the catches oflps typographus （L.）, particularly males, in pheromone-baited traps. The first of these strategies, the barrier approach, used alternating pheromone blends, targeting males and females respectively, in closely-spaced traps forming a barrier around forest stands. The second strategy, the single trap approach, used widely-spaced traps that were all baited with the same lure and intended to trap the highest possible numbers of males without compromising trapping of females. In the blend used for the barrier traps targeting primarily males, with a lower percentage of （4S）-cis-verbenol （cV）, the （-）-α-pinene was replaced step wise with （＋）-limonene at rates of 0%, 1%, 10%, 35%, 60% and 90%. This replacement had no significant effect on the numbers of responding 1. typographus males, but there was a slight effect on the percentage of males caught. In the attractant blend for the barrier traps targeting females, with a higher percentage of cV, the 2-methyl-3-buten-2-ol （MB） was replaced with 1-methoxy-2-propanol （MP） in a similar fashion as for the male-specific blends. The replacement did not significantly affect the catch of females. Thus, it is pos- sible to use the MP in the blend with cV and ipsdienol without significant change in catch efficacy. In the blends for single traps, the （-）-α- pinene was replaced with （＋）-limonene and MB with MP. The replacement of （-）-α-pinene had only a slight effect on the percentage of males, but the results suggest that replacing MB with MP in the blend will not significantly reduce trapping efficacy.

Ultrasonic study on molecular interactions in binary mixtures of formamide with 1-propanol or 2-propanol

Ultrasonic speeds have been measured at 298.15 K and 308.15 K for mixtures of formamide ＋ 1 -propanol or 2-propanol. For an equimolar mixture, excess molar compressibility follows the sequence of l-propanol 〉 2-propanol. The ultrasonic speed data are correlated by various correlations such as Nomoto＇s relation, van Dael＇s mixing relation and impedance dependence relation, and analyzed in terms of Jacobson＇s free length theory and Schaaffs collision factor theory. Excess isentropic compressibility is calculated from ex- perimental ultrasonic speed data and previously reported excess volume data. The excess molar ultrasonic speed and isentropic compressibility values are fitted to Redlich-Kister polynomial equation. Other proper- ties such as molecular association, available volume, free volume, and intermolecular free length are also calculated. The excess isentropic compressibility data are also interpreted in terms of graph theoretical ap- proach. The calculated isentropic compressibility values are well consistent with the experimental data. It is found that the interaction between formamide and propanol increases when hydroxyl group attached to a carbon atom has more -CH3 groups.

Fe、Ir掺杂MoS_(2)表面对N_(2)气敏吸附与解离反应性能提升的第一性原理研究

基于第一性原理方法,采用周期性平板模型,研究了N_(2)分子在掺杂体系TM-MoS_(2)(TM=Fe、Ir)表面的吸附和解离行为.研究表明:N_(2)分子在TM-MoS_(2)(TM=Fe、Ir)表面吸附能依次为0.62和0.47 eV,而完整MoS_(2)表面的吸附能只有0.08 eV,说明掺杂之后对N_(2)表现出略好的吸附性能.差分电荷密度分析表明,N_(2)吸附后,掺杂Fe、Ir原子与两个N原子之间电荷有所增加,N-N键之间的区域电荷密度减少,N-N键的强度减弱.态密度计算结果发现,N_(2)在吸附过程中,主要是N原子的2p_(y)、2p_(z)轨道与Ir的5d_(xy)和5d_(z^(2))以及Fe的3d_(xy)和3d_(z^(2))发生杂化作用.通过分析解离活化能,N_(2)在掺杂体系TM-MoS_(2)(TM=Fe、Ir)表面解离需要活化能均较高,且远大于在相应掺杂表面的吸附能,说明N_(2)在掺杂体系TM-MoS_(2)(TM=Fe、Ir)表面解离应该表现为分子吸附或脱附.

芝麻过敏原Ses i 2核酸适体的筛选与鉴定研究

芝麻是八大类食物过敏原之一,快速准确识别芝麻过敏原对预防其过敏有重要意义。核酸适配体可以高效识别靶标过敏原,在过敏原检测中有良好的应用前景。为了获得芝麻主要过敏原Ses i 2的特异性核酸适体,本研究以Ses i 2为靶标,通过磁珠筛选法(磁珠-SELEX)开展10轮筛选,经由高通量测序获得6条候补序列(S1~S6),并进行家族性、同源性分析及二级结构预测。结果表明,6条候选核酸适体的重复率可达46.38%,其自由能在-9.02到-2.47 kcal·moL^(-1)之间,根据自由能能量稳定原则,S1和S5吉布斯自由能最低最稳定,分别为-6.70和-9.02 kcal·moL^(-1)。利用ELISA试验进行亲和力测试,结果表明核酸适体S1和S2的亲和能力较强,S1:KD=67.02 nmol·L^(-1),R2=0.925 8,S2:KD=97.65 nmol·L^(-1),R2=0.795 1。核酸适体S1与过敏原Ses i 2的结合力和其他过敏原蛋白相比有显著差异,可视为具有特异性。本研究最终获得一条兼具良好亲和力和特异性的核酸适体S1,为芝麻过敏原快速检测提供了技术支撑。

铀对α-Al_(2)O_(3)中氢与本征点缺陷相互作用的影响

在长期高温服役过程中,铀床的氚渗透泄露问题是聚变堆涉氚系统中需要关注的焦点之一,而一种行之有效的解决思路是在内壁制备阻氚涂层.然而,服役过程中通过热扩散渗入涂层内部的铀可能在阻氚涂层氢行为中起作用,进而影响其服役可靠性.基于此,采用第一性原理计算方法,研究了铀对α-Al_(2)O_(3)中氢与本征点缺陷相互作用的影响.结果发现,铀对α-Al_(2)O_(3)中空位型本征点缺陷及氢相关缺陷的存在形式、电荷态及相对稳定性有重要影响.从形成能观点来看,铀对α-Al_(2)O_(3)中空位型本征点缺陷及氢相关缺陷的形成有利,且α-Al_(2)O_(3)中空位型点缺陷对氢的捕陷能力因铀的引入显著增加.研究结果对α-Al_(2)O_(3)基内壁阻氚涂层在氚工艺系统铀床中应用的可靠性评估具有重要的指导意义.

C反应蛋白/白蛋白比值对2型糖尿病合并急性心肌梗死患者远期不良心脑血管事件的预测价值研究

背景急性心肌梗死(AMI)是威胁全球公众健康的主要原因之一。虽然已有相应的再灌注治疗策略,但AMI相关的主要不良心脑血管事件(MACCEs)仍然是全世界人口死亡的原因之一。尤其合并糖尿病的AMI患者,因冠状动脉病变复杂,病变程度严重,尽早发现和判断该部分患者远期预后相对困难,因此寻找相对简便、易获得的实验室指标,有利于为2型糖尿病(T2DM)合并AMI患者经皮冠状动脉介入(PCI)术后MACCEs的预测提供依据。目的探讨血清C反应蛋白(CRP)/白蛋白(Alb)比值(CAR)对T2DM合并AMI患者PCI术后远期MACCEs的预测价值。方法纳入2014—2019年就诊于宁夏医科大学总医院心血管内科1683例T2DM合并AMI患者为研究对象,收集患者的一般临床资料与检查结果。对所有患者进行电话或门诊随访,以全因死亡、非致死性心肌梗死、再发不稳定型心绞痛、非致死性脑卒中、新发心力衰竭或心力衰竭加重再入院、再次血运重建作为MACCEs。根据患者随访期间是否发生MACCEs分为MACCEs组(508例)和非MACCEs组(1175例)。采用单因素及多因素Logistic回归分析探讨T2DM合并AMI患者MACCEs事件的影响因素。采用Kaplan-Meier法绘制患者的生存曲线,生存曲线的比较采用Log-rank检验。采用受试者工作特征(ROC)曲线分析CAR对T2DM合并AMI患者远期发生MACCEs的预测效能,使用净重分类改善指标(NRI)和综合判别指数(IDI)评价CAR对T2DM合并AMI患者预后评估的改善效果。结果1683例患者中508例(30.18%)患者发生MACCEs。多因素Logistic回归分析显示高血压病[OR(95%CI)=1.994(1.142~3.483)]、冠状动脉植入支架长度[OR(95%CI)=1.031(1.002~1.062)]、CRP[OR(95%CI)=0.950(0.915~0.986)]、Alb[OR(95%CI)=0.933(0.880~0.989)]及CAR[OR(95%CI)=5.582(1.705~18.277)]是T2DM合并AMI患者PCI术后发生MACCEs的影响因素(P<0.05)。根据CAR中位表达水平(0.86),将患者分为CAR<0.86组和CAR≥0.86组,Log-rank检验结果显示,CAR≥0.86组MACCEs发生率高于CAR<0.86组(52.68%与22.92%;χ^(2)=65.65,P<0.001)。ROC曲线显示CAR预测T2DM合并AMI患者发生MACCEs的ROC曲线下面积为0.728(95%CI=0.702~0.754),最佳截断值为0.576,灵敏度为0.617,特异度为0.747。在基线模型基础上,与CRP、Alb相比,CAR能明显改善对患者发生MACCEs的预测效果(NRI=0.377,IDI=0.166,C指数=0.690;P<0.05)。结论CAR是T2DM合并AMI患者PCI术后远期MACCEs发生风险的有效预测指标。