In this study,Pd-Mg(Al)-LDH/γ-Al2O3 and Pd-Mg(Al)Zr-LDH/γ-Al2O3 precursors were synthesized by impregnating Na2PdCl4 on Mg(Al)-LDH/γ-Al2O3 and Mg(Al)Zr-LDH/γ-Al2O3,and then the precursors were calcinated and reduc...In this study,Pd-Mg(Al)-LDH/γ-Al2O3 and Pd-Mg(Al)Zr-LDH/γ-Al2O3 precursors were synthesized by impregnating Na2PdCl4 on Mg(Al)-LDH/γ-Al2O3 and Mg(Al)Zr-LDH/γ-Al2O3,and then the precursors were calcinated and reduced to obtain Pd-Mg(Al)-MMO/γ-Al2O3 and Pd-Mg(Al)Zr-MMO/γ-Al2O3 catalysts.Compared with Pd/γ-Al2O3 catalyst,the hydrogenation efficiency of Pd-Mg(Al)-MMO/γ-Al2O3 and Pd-Mg(Al)Zr-MMO/γ-Al2O3 increased by 15.7%and 24.0%,respectively.Moreover,the stability of Pd-Mg(Al)Zr-MMO/γ-Al2O3 catalyst was also higher than that of Pd/γ-Al2O3.After four runs,the hydrogenation efficiency of Pd/γ-Al2O3 decreased from 12.1 to 10.0 g/L,while that of Pd-Mg(Al)Zr-MMO/γ-Al2O3 decreased from 15.0 to 14.3 g/L.The active aquinones selectivities of all catalysts were almost 99%.The structures of the catalysts were characterized by X-ray diffraction(XRD),scanning electron microscopy(SEM),N2 adsorption–desorption,inductively coupled plasma-atomic emission spectrometry(ICP-AES),CO chemisorption analysis,transmission electron microscopy(TEM),temperature-programmed reduction with hydrogen(H2-TPR),and X-ray photoelectron spectroscopy(XPS).The results indicate that the improved catalytic performance is attributed to the stronger interaction between Pd and Mg(Al)Zr-MMO/γ-Al2O3,smaller Pd particle size and higher Pd dispersion.This work develops an effective method to synthesize highly dispersed Pd nanoparticles based on the layered double hydroxides(LDHs)precursor.展开更多
The dehydration of 2-(4'-ethylbenzoyl) benzoic acid (BE acid) to 2-ethylanthraquinone (2-EAQ) was investigated over solid acid catalysts. The results showed that H-beta zeolite catalyst modified by dilute HNO3 ...The dehydration of 2-(4'-ethylbenzoyl) benzoic acid (BE acid) to 2-ethylanthraquinone (2-EAQ) was investigated over solid acid catalysts. The results showed that H-beta zeolite catalyst modified by dilute HNO3 solution exhibited an excellent performance. In our study, the conversion of BE acid can reach 96.7%, and the selectivity to 2-EAQ is up to 99.6%.展开更多
Pd/oxide/cordierite monolithic catalysts(oxide = Al_2O_3, SiO_2 and SiO_2\\Al_2O_3) were prepared by the impregnation method. The results of ICP, XRD, SEM–EDX, XPS and N_2 adsorption–desorption measurements revealed...Pd/oxide/cordierite monolithic catalysts(oxide = Al_2O_3, SiO_2 and SiO_2\\Al_2O_3) were prepared by the impregnation method. The results of ICP, XRD, SEM–EDX, XPS and N_2 adsorption–desorption measurements revealed that the Pd penetration depth increased with increasing the thickness of oxide layer, and the catalysts with Al_2O_3 layers had the larger pore size than those with SiO_2 and SiO_2\\Al_2O_3 layers. Catalytic hydrogenation of 2-ethylanthraquinone(eA Q), a key step of the H_2O_2 production by the anthraquinone process, over the various monolithic catalysts(60 °C, atmosphere pressure) showed that the monolithic catalyst with the moderate thickness of Al_2O_3 layer(about 6 μm) exhibited the highest conversion of e AQ(99.1%) and hydrogenation efficiency(10.0 g·L^(-1)). This could be ascribed to the suitable Pd penetration depth and the larger pore size, which provides a balance between the distribution of Pd and accessibility of active sites by the reactants.展开更多
基金supported by the National Natural Science Foundation of China (Nos. 21276179, 21576205)the Program for Changjiang Scholars, Innovative Research Team in University (IRT_15R46)
文摘In this study,Pd-Mg(Al)-LDH/γ-Al2O3 and Pd-Mg(Al)Zr-LDH/γ-Al2O3 precursors were synthesized by impregnating Na2PdCl4 on Mg(Al)-LDH/γ-Al2O3 and Mg(Al)Zr-LDH/γ-Al2O3,and then the precursors were calcinated and reduced to obtain Pd-Mg(Al)-MMO/γ-Al2O3 and Pd-Mg(Al)Zr-MMO/γ-Al2O3 catalysts.Compared with Pd/γ-Al2O3 catalyst,the hydrogenation efficiency of Pd-Mg(Al)-MMO/γ-Al2O3 and Pd-Mg(Al)Zr-MMO/γ-Al2O3 increased by 15.7%and 24.0%,respectively.Moreover,the stability of Pd-Mg(Al)Zr-MMO/γ-Al2O3 catalyst was also higher than that of Pd/γ-Al2O3.After four runs,the hydrogenation efficiency of Pd/γ-Al2O3 decreased from 12.1 to 10.0 g/L,while that of Pd-Mg(Al)Zr-MMO/γ-Al2O3 decreased from 15.0 to 14.3 g/L.The active aquinones selectivities of all catalysts were almost 99%.The structures of the catalysts were characterized by X-ray diffraction(XRD),scanning electron microscopy(SEM),N2 adsorption–desorption,inductively coupled plasma-atomic emission spectrometry(ICP-AES),CO chemisorption analysis,transmission electron microscopy(TEM),temperature-programmed reduction with hydrogen(H2-TPR),and X-ray photoelectron spectroscopy(XPS).The results indicate that the improved catalytic performance is attributed to the stronger interaction between Pd and Mg(Al)Zr-MMO/γ-Al2O3,smaller Pd particle size and higher Pd dispersion.This work develops an effective method to synthesize highly dispersed Pd nanoparticles based on the layered double hydroxides(LDHs)precursor.
文摘The dehydration of 2-(4'-ethylbenzoyl) benzoic acid (BE acid) to 2-ethylanthraquinone (2-EAQ) was investigated over solid acid catalysts. The results showed that H-beta zeolite catalyst modified by dilute HNO3 solution exhibited an excellent performance. In our study, the conversion of BE acid can reach 96.7%, and the selectivity to 2-EAQ is up to 99.6%.
基金Supported by the Sinopec Corp.Scientific Research Projects(414076)
文摘Pd/oxide/cordierite monolithic catalysts(oxide = Al_2O_3, SiO_2 and SiO_2\\Al_2O_3) were prepared by the impregnation method. The results of ICP, XRD, SEM–EDX, XPS and N_2 adsorption–desorption measurements revealed that the Pd penetration depth increased with increasing the thickness of oxide layer, and the catalysts with Al_2O_3 layers had the larger pore size than those with SiO_2 and SiO_2\\Al_2O_3 layers. Catalytic hydrogenation of 2-ethylanthraquinone(eA Q), a key step of the H_2O_2 production by the anthraquinone process, over the various monolithic catalysts(60 °C, atmosphere pressure) showed that the monolithic catalyst with the moderate thickness of Al_2O_3 layer(about 6 μm) exhibited the highest conversion of e AQ(99.1%) and hydrogenation efficiency(10.0 g·L^(-1)). This could be ascribed to the suitable Pd penetration depth and the larger pore size, which provides a balance between the distribution of Pd and accessibility of active sites by the reactants.