In-situ TiB2 particles reinforced 2014 aluminum alloy composite was prepared using an exothermic reaction process with K2TiF6 and KBF4 salts. The effects of CeO2 additive on the microstructure and properties of in-sit...In-situ TiB2 particles reinforced 2014 aluminum alloy composite was prepared using an exothermic reaction process with K2TiF6 and KBF4 salts. The effects of CeO2 additive on the microstructure and properties of in-situ TiB2/2014 composite were investigated. The results showed that CeO2 at high temperature exhibits the same function as Ce. When 0.5% （mass fraction） CeO2 additive was added, the dispersion of TiB2 particles in the matrix is improved significantly, and particles have no obvious settlement. The dispersing mechanism of TiB2 particles in 2014 Al alloy matrix was explained. Compared with the composite without CeO2, the hardness, tensile strength, yield strength and elongation of the composite with CeO2 addition are greatly increased in as-cast condition.展开更多
A three-dimensional friction stir welding （FSW） process model has been developed based on fluid mechanics. The material transport in the welding process has been regarded as a laminar, viscous, and non-Newtonian liq...A three-dimensional friction stir welding （FSW） process model has been developed based on fluid mechanics. The material transport in the welding process has been regarded as a laminar, viscous, and non-Newtonian liquid that flows past a rotating pin. A criterion to divide the weld zone has been given on the basis of cooperation of velocity field and viscosity field. That is, the η0-easy-flow zone that existed near the tool pin corresponded to the weld nugget zone; the area between the η0-easy-flow zone and η1-viscosity band is corresponded to the thermal-mechanical affected zone （TMAZ）. The model gives some useful information to improve the understanding of material flow in FSW through the simulation result of velocity distribution. In order to appraise the friction stir pin design, three kinds of pin geometry, one is column pin, the second is taper pin, and the last one is screw threaded taper pin, were used in the model. The pin geometry seriously affected the simulation result of velocity distribution in the η0-easy-flow zone. The velocity distribution in the η0-easy-flow zone can be considered as the criterion of optimizing friction stir tool design. This study will benefit to direct the friction stir tool design.展开更多
基金Project (2008AA03A239) supported by the High-tech Research and Development Program of China
文摘In-situ TiB2 particles reinforced 2014 aluminum alloy composite was prepared using an exothermic reaction process with K2TiF6 and KBF4 salts. The effects of CeO2 additive on the microstructure and properties of in-situ TiB2/2014 composite were investigated. The results showed that CeO2 at high temperature exhibits the same function as Ce. When 0.5% （mass fraction） CeO2 additive was added, the dispersion of TiB2 particles in the matrix is improved significantly, and particles have no obvious settlement. The dispersing mechanism of TiB2 particles in 2014 Al alloy matrix was explained. Compared with the composite without CeO2, the hardness, tensile strength, yield strength and elongation of the composite with CeO2 addition are greatly increased in as-cast condition.
文摘A three-dimensional friction stir welding （FSW） process model has been developed based on fluid mechanics. The material transport in the welding process has been regarded as a laminar, viscous, and non-Newtonian liquid that flows past a rotating pin. A criterion to divide the weld zone has been given on the basis of cooperation of velocity field and viscosity field. That is, the η0-easy-flow zone that existed near the tool pin corresponded to the weld nugget zone; the area between the η0-easy-flow zone and η1-viscosity band is corresponded to the thermal-mechanical affected zone （TMAZ）. The model gives some useful information to improve the understanding of material flow in FSW through the simulation result of velocity distribution. In order to appraise the friction stir pin design, three kinds of pin geometry, one is column pin, the second is taper pin, and the last one is screw threaded taper pin, were used in the model. The pin geometry seriously affected the simulation result of velocity distribution in the η0-easy-flow zone. The velocity distribution in the η0-easy-flow zone can be considered as the criterion of optimizing friction stir tool design. This study will benefit to direct the friction stir tool design.
