Crushing roller is one of the main parts of High-p re ssure Grinding Roller, which is a kind of high efficient ore crushing equipment. A kind of assembled roller, which is more convenient to renovate worn surface b y ...Crushing roller is one of the main parts of High-p re ssure Grinding Roller, which is a kind of high efficient ore crushing equipment. A kind of assembled roller, which is more convenient to renovate worn surface b y simply replacing segmented surface of the roller, was developed. The structura l models of assembled roller’s components were designed with SolidWorks softwar e based on feature modeling, these solid models of the roller were virtually ass embled. Through this work, not only was the assemble interference checked out so as to examine validity of the structure design, but also these solid models cou ld be recognized by COSMOS/Works software, through which the finite element an alysis can be done. Then the stress and displacement of the main shaft and sur face segment in two different working states were analyzed and detected quickly according to the analysis results with COSMOS/Works. In conclusion, the optimum clearance of 1.0～2.0 mm between concave-convex studded segments is determined to make the using life of assembled roller longer.展开更多
The 3D inverse design method, which methodology is far superior to the conventional design method that based on geometrical description, is gradually applied in pump blade design. However, no complete description abou...The 3D inverse design method, which methodology is far superior to the conventional design method that based on geometrical description, is gradually applied in pump blade design. However, no complete description about the method is outlined. Also, there are no general rules available to set the two important input parameters, blade loading distribution and stacking condition. In this sense, the basic theory and the mechanism why the design method can suppress the formation of secondary flow are summarized. And also, several typical pump design cases with different specific speeds ranging from centrifugal pump to axial pump are surveyed. The results indicates that, for centrifugal pump and mixed pump or turbine, the ratio of blade loading on the hub to that on the shroud is more than unit in the fore part of the blade, whereas in the aft part, the ratio is decreased to satisfy the same wrap angle for hub and shroud. And the choice of blade loading type depends on the balancing of efficiency and cavitation. If the cavitation is more weighted, the better choice is aft-loaded, otherwise, the fore-loaded or mid-loaded is preferable to improve the efficiency. The stacking condition, which is an auxiliary to suppress the secondary flow, can have great effect on the jet-wake outflow and the operation range for pump. Ultimately, how to link the design method to modem optimization techniques is illustrated. With the know-how design methodology and the know-how systematic optimization approach, the application of optimization design is promising for engineering. This paper summarizes the 3D inverse design method systematically.展开更多
According to the technique requests of the brake caliper in the process of production, a special fixture of float brake caliper has been developed based on 3 D design in this paper. The development process and verifie...According to the technique requests of the brake caliper in the process of production, a special fixture of float brake caliper has been developed based on 3 D design in this paper. The development process and verified data from 3D modeling and kinematics simulation for this special fixture show that this 3D-designed process can conveniently forecast the assembly interference of the fixture and accurately add the mass of lead brick before the prototype is made. In this way the flutter caused by the unbalanced lathe fixture can be eliminated and the precision of run-out tolerance in cylinder hole compared with machine tool spindle can be improved, thus the processing quality of the cylinder hole in a brake caliper can be greatly guaranteed.展开更多
This paper describes a method of the computer aided garment design,and discusses 3-D humanbody,wire frame modelling,approaches of expressing and a shading model of the 3-D garment.
In this paper,we consider a new spectrum sharing scenario for a cognitive relay network,where a secondary unmanned aerial vehicle(UAV)relay receives information from the ground secondary base station(SBS)and transmits...In this paper,we consider a new spectrum sharing scenario for a cognitive relay network,where a secondary unmanned aerial vehicle(UAV)relay receives information from the ground secondary base station(SBS)and transmits information to the ground secondary user(SU),coexisting with the primary users(PUs)at the same wireless frequency band.We investigate the optimization of the UAV relay’s three-dimensional(3D)trajectory to improve the communication throughput performance of the secondary network subject to the interference constraints of the PUs.The information throughput maximization problem is studied by jointly optimizing the UAV relay’s 3D trajectory and the transmit power of the SBS and the UAV,subject to the constraints on the velocity and elevation of the UAV relay,the maximum and average transmit power,and the information causality,as well as a set of interference temperature(IT)constraints.An efficient algorithm is proposed to solve the admittedly challenging non-convex problem by using the path discretization technique,the successive convex approximation technique and the alternating optimization method.Finally,simulation results are provided to show that our proposed design outperforms other benchmark schemes in terms of the throughput。展开更多
文摘Crushing roller is one of the main parts of High-p re ssure Grinding Roller, which is a kind of high efficient ore crushing equipment. A kind of assembled roller, which is more convenient to renovate worn surface b y simply replacing segmented surface of the roller, was developed. The structura l models of assembled roller’s components were designed with SolidWorks softwar e based on feature modeling, these solid models of the roller were virtually ass embled. Through this work, not only was the assemble interference checked out so as to examine validity of the structure design, but also these solid models cou ld be recognized by COSMOS/Works software, through which the finite element an alysis can be done. Then the stress and displacement of the main shaft and sur face segment in two different working states were analyzed and detected quickly according to the analysis results with COSMOS/Works. In conclusion, the optimum clearance of 1.0～2.0 mm between concave-convex studded segments is determined to make the using life of assembled roller longer.
基金Supported by National Basic Research Program of China(973 Program,Grant No.2009CB724302)
文摘The 3D inverse design method, which methodology is far superior to the conventional design method that based on geometrical description, is gradually applied in pump blade design. However, no complete description about the method is outlined. Also, there are no general rules available to set the two important input parameters, blade loading distribution and stacking condition. In this sense, the basic theory and the mechanism why the design method can suppress the formation of secondary flow are summarized. And also, several typical pump design cases with different specific speeds ranging from centrifugal pump to axial pump are surveyed. The results indicates that, for centrifugal pump and mixed pump or turbine, the ratio of blade loading on the hub to that on the shroud is more than unit in the fore part of the blade, whereas in the aft part, the ratio is decreased to satisfy the same wrap angle for hub and shroud. And the choice of blade loading type depends on the balancing of efficiency and cavitation. If the cavitation is more weighted, the better choice is aft-loaded, otherwise, the fore-loaded or mid-loaded is preferable to improve the efficiency. The stacking condition, which is an auxiliary to suppress the secondary flow, can have great effect on the jet-wake outflow and the operation range for pump. Ultimately, how to link the design method to modem optimization techniques is illustrated. With the know-how design methodology and the know-how systematic optimization approach, the application of optimization design is promising for engineering. This paper summarizes the 3D inverse design method systematically.
文摘According to the technique requests of the brake caliper in the process of production, a special fixture of float brake caliper has been developed based on 3 D design in this paper. The development process and verified data from 3D modeling and kinematics simulation for this special fixture show that this 3D-designed process can conveniently forecast the assembly interference of the fixture and accurately add the mass of lead brick before the prototype is made. In this way the flutter caused by the unbalanced lathe fixture can be eliminated and the precision of run-out tolerance in cylinder hole compared with machine tool spindle can be improved, thus the processing quality of the cylinder hole in a brake caliper can be greatly guaranteed.
文摘This paper describes a method of the computer aided garment design,and discusses 3-D humanbody,wire frame modelling,approaches of expressing and a shading model of the 3-D garment.
基金This work was supported by the National Key Research and Development Project under Grant 2020YFB1807602,Natural Science Foundation of China under Grant 62071223,62031012,61701214 and 61661028by the National Key Scientific Instrument and Equipment Development Project under Grant No.61827801+1 种基金the Open Project of the Shaanxi Key Laboratory of Information Communication Network and Security under Grant ICNS201701the Excellent Youth Foundation of Jiangxi Province under Grant 2018ACB21012 and in part by the Young Elite Scientist Sponsorship Program by CAST.
文摘In this paper,we consider a new spectrum sharing scenario for a cognitive relay network,where a secondary unmanned aerial vehicle(UAV)relay receives information from the ground secondary base station(SBS)and transmits information to the ground secondary user(SU),coexisting with the primary users(PUs)at the same wireless frequency band.We investigate the optimization of the UAV relay’s three-dimensional(3D)trajectory to improve the communication throughput performance of the secondary network subject to the interference constraints of the PUs.The information throughput maximization problem is studied by jointly optimizing the UAV relay’s 3D trajectory and the transmit power of the SBS and the UAV,subject to the constraints on the velocity and elevation of the UAV relay,the maximum and average transmit power,and the information causality,as well as a set of interference temperature(IT)constraints.An efficient algorithm is proposed to solve the admittedly challenging non-convex problem by using the path discretization technique,the successive convex approximation technique and the alternating optimization method.Finally,simulation results are provided to show that our proposed design outperforms other benchmark schemes in terms of the throughput。
