This study delves into the charge transfer mechanism of boron (B)-doped 3C-SiC through first-principles investigations. We explore the effects of B doping on the electronic properties of 3C-SiC, focusing on a 12.5% im...This study delves into the charge transfer mechanism of boron (B)-doped 3C-SiC through first-principles investigations. We explore the effects of B doping on the electronic properties of 3C-SiC, focusing on a 12.5% impurity concentration. Our comprehensive analysis encompasses structural properties, electronic band structures, and charge density distributions. The optimized lattice constant and band gap energy of 3C-SiC were found to be 4.373 Å and 1.36 eV respectively, which is in agreement with previous research (Bui, 2012;Muchiri et al., 2018). Our results show that B doping narrows the band gap, enhances electrical conductivity, and influences charge transfer interactions. The charge density analysis reveals substantial interactions between B dopants and surrounding carbon atoms. This work not only enhances our understanding of the material’s electronic properties, but also highlights the importance of charge density analysis for characterizing charge transfer mechanisms and their implications in the 3C-SiC semiconductors.展开更多
The structures,mechanical properties and electronic structures of M metals(M=Ti,V,Cr,Mn and Fe)dopedβ-Si_(3)N_(4) were investigated by First-principles calculations within CASTEP.The calculated lattice parameters of...The structures,mechanical properties and electronic structures of M metals(M=Ti,V,Cr,Mn and Fe)dopedβ-Si_(3)N_(4) were investigated by First-principles calculations within CASTEP.The calculated lattice parameters ofβ-Si_(3)N_(4) were consistent with previous date.The cohesive energy and formation enthalpy show that initialβ-Si_(3)N_(4) has the highest structural stability.The calculated elastic constant and the Voigt-Reuss-Hill approximation indicate that elastic moduli ofβ-Si_(3)N_(4) are slightly reduced by M doping.Based on Poisson’s and Pugh’s ratio,β-Si_(3)N_(4) is a ductile material and the toughness ofβ-Si_(3)N_(4) increases with M doping,and Fe doping exhibited the best toughness.The results of density of states,charge distributions and overlapping populations indicate thatβ-Si_(3)N_(4) has the strong covalent and ionic bond strength between N and Si.展开更多
The electronic structure,including band structure,density of states （DOS）, and partial density of states of SrTi1-xSbxO3 with x = 0,0. 125,0.25,and 0.33 is calculated from the first principles of plane wave ultra-so...The electronic structure,including band structure,density of states （DOS）, and partial density of states of SrTi1-xSbxO3 with x = 0,0. 125,0.25,and 0.33 is calculated from the first principles of plane wave ultra-soft pseudo-potential technology based on density function theory. The calculated results reveal that due to the electron doping,the Fermi level moves into the conduction bands for SrTi1-xSbxO3 with x = 0. 125 and the system shows metallic behavior. In addition, the DOS moves towards low energy and the optical band gap is broadened. The wide band gap and the low density of the states in the conduction band result in the transparency of the films.展开更多
The first-principles method based on the projector augmented wave method within the generalized gradient approximation was employed to calculate the superlattice intrinsic stacking fault（SISF） and complex stacking f...The first-principles method based on the projector augmented wave method within the generalized gradient approximation was employed to calculate the superlattice intrinsic stacking fault（SISF） and complex stacking fault（CSF） energies of the binary Ni3Al alloys with different Al contents and the ternary Ni3Al intermetallic alloys with addition of alloying elements,such as Pd,Pt,Ti,Mo,Ta,W and Re.The results show that the energies of SISF and CSF increase significantly with increase of Al contents in Ni3Al.Addition of Pd and Pt occupying the Ni sublattices does not change the SISF and CSF energies of Ni3Al markedly in comparison with the Ni-23.75Al alloy.While addition of alloying elements,such as Ti,Mo,Ta,W and Re,occupying the Al sublattices dramatically increases the SISF and CSF energies of Ni3Al.The results suggest that the energies of SISF and CSF are dependent both on the Al contents and on the site occupancy of the ternary alloying element in Ni3Al intermetallic alloys.展开更多
Zinc-air batteries(ZABs)are promising energy storage systems because of high theoretical energy density,safety,low cost,and abundance of zinc.However,the slow multi-step reaction of oxygen and heavy reliance on noble-...Zinc-air batteries(ZABs)are promising energy storage systems because of high theoretical energy density,safety,low cost,and abundance of zinc.However,the slow multi-step reaction of oxygen and heavy reliance on noble-metal catalysts hinder the practical applications of ZABs.Therefore,feasible and advanced non-noble-metal elec-trocatalysts for air cathodes need to be identified to promote the oxygen catalytic reaction.In this review,we initially introduced the advancement of ZABs in the past two decades and provided an overview of key developments in this field.Then,we discussed the work-ing mechanism and the design of bifunctional electrocatalysts from the perspective of morphology design,crystal structure tuning,interface strategy,and atomic engineering.We also included theoretical studies,machine learning,and advanced characterization technologies to provide a comprehensive understanding of the structure-performance relationship of electrocatalysts and the reaction pathways of the oxygen redox reactions.Finally,we discussed the challenges and prospects related to designing advanced non-noble-metal bifunctional electrocatalysts for ZABs.展开更多
The structural, elastic, electronic and optical properties for U3Si2-type AlSc2Si2 compound under pressure were systematically investigated by using the first-principles calculations. The values of elastic constants a...The structural, elastic, electronic and optical properties for U3Si2-type AlSc2Si2 compound under pressure were systematically investigated by using the first-principles calculations. The values of elastic constants and elastic moduli indicate that AlSc2Si2 keeps mechanical stability under high pressure. The mechanical properties of AISc2Si2 are compared with those of Al3Sc. The results indicate that AlSc2Si2 is harder than AI3Sc. Anisotropic constant AU and 3D curved surface of elastic moduli predict that AISc2Si2 is obviously anisotropic under pressure. The electronic structure of AlSc2Si2 exhibits metallic character and the metallicity decreases with the elevated pressure. In addition, optical properties as a function of pressure were calculated and analyzed. The present work provides theoretical support for further experimental work and industrial applications.展开更多
The Ni （001） surface, Ni3Nb （001） surface and Ni （001）/Ni3Nb （001） interfaces were studied using the first-principles pseudopotential plane-wave method. The adhesion work, thermal stability and electronic stru...The Ni （001） surface, Ni3Nb （001） surface and Ni （001）/Ni3Nb （001） interfaces were studied using the first-principles pseudopotential plane-wave method. The adhesion work, thermal stability and electronic structure of Ni/Ni3Nb （001） interfaces were calculated to expound the influence of atom termination and stacking sequence on the interface strength and stability. Simulated results indicate that Ni and Ni3Nb （001） surface models with more than eight atomic layers exhibit bulk-like interior. The （Ni＋Nb）-terminated interface with hollow site stacking has the largest cohesive strength and critical stress for crack propagation and the best thermal stability among the four models. This interfacial Ni and the first nearest neighbor Nb atoms form covalent bonds across the interface region, which are mainly contributed by Nb 4d and Ni 3d valence electrons. By comparison, the thermal stability of Ni/Ni3Nb （001） interfaces is worse than Ni/Ni3A1 （001） interface, implying that the former is harder to form. But the Ni/Ni3Nb interface can improve the mechanical properties ofNi-based superalloys.展开更多
We have investigated properties of the compound LuAlO3：Ce^3＋ associated with the Ce^3＋ 4f-5d transition by using the periodic density functional theory. A hybrid functional has been used for the 4f states and a con...We have investigated properties of the compound LuAlO3：Ce^3＋ associated with the Ce^3＋ 4f-5d transition by using the periodic density functional theory. A hybrid functional has been used for the 4f states and a constrained approach has been employed for the excited 5d state. It is found that the average distance between Ce^3＋ and the eight nearest-neighbor O atoms decrease by 0.05 A on going from 4f to 5d state. The calculated Stokes shift is in good agreement with experiment. Based on the optimized structure around Ce^3＋, the energy level scheme of the 5d states has been evaluated using the angular overlap model, in reasonable agreement with experiment.展开更多
A model system consisting of Ni[001]（100）/Ni3Al[001]（100） multi-layers are studied using the density functional theory in order to explore the elastic properties of single crystal Ni-based superalloys. Simulation ...A model system consisting of Ni[001]（100）/Ni3Al[001]（100） multi-layers are studied using the density functional theory in order to explore the elastic properties of single crystal Ni-based superalloys. Simulation results are consistent with the experimental observation that rafted Ni-base superalloys virtually possess a cubic symmetry. The convergence of the elastic properties with respect to the thickness of the multilayers are tested by a series of multilayers from 2γ′＋2γto 10γ′＋10γ atomic layers. The elastic properties are found to vary little with the increase of the multilayer＇s thickness. A Ni/Ni3Al multilayer with 10γ′＋10γ atomic layers （3.54 nm） can be used to simulate the mechanical properties of Ni-base model superalloys. Our calculated elastic constants, bulk modulus, orientation-dependent shear modulus and Young＇s modulus, as well as the Zener anisotropy factor are all compatible with the measured results of Ni-base model superalloys R1 and the advanced commercial superalloys TMS-26, CMSX-4 at a low temperature. The mechanical properties as a function of the γ′ phase volume fraction are calculated by varying the proportion of the γ and γ′ phase in the multilayers. Besides, the mechanical properties of two-phase Ni/Ni3Al multilayer can be well predicted by the Voigt-Reuss-Hill rule of mixtures.展开更多
In order to address the output feedback issue for linear discrete-time systems, this work suggests a brand-new adaptive dynamic programming(ADP) technique based on the internal model principle(IMP). The proposed metho...In order to address the output feedback issue for linear discrete-time systems, this work suggests a brand-new adaptive dynamic programming(ADP) technique based on the internal model principle(IMP). The proposed method, termed as IMP-ADP, does not require complete state feedback-merely the measurement of input and output data. More specifically, based on the IMP, the output control problem can first be converted into a stabilization problem. We then design an observer to reproduce the full state of the system by measuring the inputs and outputs. Moreover, this technique includes both a policy iteration algorithm and a value iteration algorithm to determine the optimal feedback gain without using a dynamic system model. It is important that with this concept one does not need to solve the regulator equation. Finally, this control method was tested on an inverter system of grid-connected LCLs to demonstrate that the proposed method provides the desired performance in terms of both tracking and disturbance rejection.展开更多
The electronic and magnetic properties of Ce doped SrMnO3 have been investigated us- ing the pseudo-potential plane wave method within the generalized gradient approximation method by first principles. The different M...The electronic and magnetic properties of Ce doped SrMnO3 have been investigated us- ing the pseudo-potential plane wave method within the generalized gradient approximation method by first principles. The different Mn-O bond lengths indicate that there is a strong Jahn-Teller distortion of the MnO6 octahedron, which associates with a structural phase transition from cubic symmetry （Pm3m） to tetragonal symmetry （I4/mcm）, and the Jahn- Teller ordering stabilizes a chain like （C-type） antiferromagnetie ground state. The electronic structures indicate that SrMnO3 and Sr1-xCexMnO3 （z=0.125 and 0.25） are semiconductor and metallic, respectively. The doping of SrMnO3 with cerium induces simultaneously a decrease in the electrical resistivity, which can be attributed to the formation of Mn3＋ as a result of charge compensation. The density of states and charge density map present that hybridization exists between some of O bands with those of Mn and Ce bands, the bonding between Sr and O is mainly ionic. Density of states and magnetic moment calculations show that the formal valence state of the Ce ion is trivalence.展开更多
The structural stability, electronic and elastic properties of Pd3-xRhxV alloys with L12 and D022 structures were investigated theoretically by the first-principles calculations. The results reveal that with the incre...The structural stability, electronic and elastic properties of Pd3-xRhxV alloys with L12 and D022 structures were investigated theoretically by the first-principles calculations. The results reveal that with the increase of Rh content, the unit cell volume of Pd3-xRhxV alloys with L12 and D022 structures decreases, and the structure of Pd3-xRhxV alloys tends to transform from D022 to L12. The elastic parameters such as elastic constants, bulk modulus, shear modulus, elastic modulus, and Poisson ratio, were calculated and discussed in details. Electronic structures were also computed to reveal the underlying mechanism for the stability and elastic properties.展开更多
The structural,electronic and optical properties of KNbO 3 （KN）,NaNbO3（NN）and K05 Na0.5NbO3（KNN） in paraelectric cubic phase were calculated employing the plane-wave pseudopotential method based on density funct...The structural,electronic and optical properties of KNbO 3 （KN）,NaNbO3（NN）and K05 Na0.5NbO3（KNN） in paraelectric cubic phase were calculated employing the plane-wave pseudopotential method based on density functional theory （DFT）.The calculated electronic structures of the three crystals show similar features in the valence bands and the lower conduction bands.However,the structures in higher conduction bands differ markedly due to the effect of Na and K atoms.The calculated optical properties reveal that the features of optical spectrum at low energy are dominated by the transitions from O2p valence bands to Nb 4d conduction bands and those at high energy are related to the transitions to K 4s4p and/or Na 3s3p states.Moreover,the optical constants of KNN are approximately the average of KN and NN at high energy.Therefore,the optical properties of KNN in high energy region can probably be altered by changing the ratio of Na/K.展开更多
文摘This study delves into the charge transfer mechanism of boron (B)-doped 3C-SiC through first-principles investigations. We explore the effects of B doping on the electronic properties of 3C-SiC, focusing on a 12.5% impurity concentration. Our comprehensive analysis encompasses structural properties, electronic band structures, and charge density distributions. The optimized lattice constant and band gap energy of 3C-SiC were found to be 4.373 Å and 1.36 eV respectively, which is in agreement with previous research (Bui, 2012;Muchiri et al., 2018). Our results show that B doping narrows the band gap, enhances electrical conductivity, and influences charge transfer interactions. The charge density analysis reveals substantial interactions between B dopants and surrounding carbon atoms. This work not only enhances our understanding of the material’s electronic properties, but also highlights the importance of charge density analysis for characterizing charge transfer mechanisms and their implications in the 3C-SiC semiconductors.
文摘The structures,mechanical properties and electronic structures of M metals(M=Ti,V,Cr,Mn and Fe)dopedβ-Si_(3)N_(4) were investigated by First-principles calculations within CASTEP.The calculated lattice parameters ofβ-Si_(3)N_(4) were consistent with previous date.The cohesive energy and formation enthalpy show that initialβ-Si_(3)N_(4) has the highest structural stability.The calculated elastic constant and the Voigt-Reuss-Hill approximation indicate that elastic moduli ofβ-Si_(3)N_(4) are slightly reduced by M doping.Based on Poisson’s and Pugh’s ratio,β-Si_(3)N_(4) is a ductile material and the toughness ofβ-Si_(3)N_(4) increases with M doping,and Fe doping exhibited the best toughness.The results of density of states,charge distributions and overlapping populations indicate thatβ-Si_(3)N_(4) has the strong covalent and ionic bond strength between N and Si.
文摘The electronic structure,including band structure,density of states （DOS）, and partial density of states of SrTi1-xSbxO3 with x = 0,0. 125,0.25,and 0.33 is calculated from the first principles of plane wave ultra-soft pseudo-potential technology based on density function theory. The calculated results reveal that due to the electron doping,the Fermi level moves into the conduction bands for SrTi1-xSbxO3 with x = 0. 125 and the system shows metallic behavior. In addition, the DOS moves towards low energy and the optical band gap is broadened. The wide band gap and the low density of the states in the conduction band result in the transparency of the films.
基金Project(50871065) supported by the National Natural Science Foundation of ChinaProjects(08DJ1400402,09JC1407200,10DZ2290904) supported by the Science and Technology Committee of Shanghai Municipality,China
文摘The first-principles method based on the projector augmented wave method within the generalized gradient approximation was employed to calculate the superlattice intrinsic stacking fault（SISF） and complex stacking fault（CSF） energies of the binary Ni3Al alloys with different Al contents and the ternary Ni3Al intermetallic alloys with addition of alloying elements,such as Pd,Pt,Ti,Mo,Ta,W and Re.The results show that the energies of SISF and CSF increase significantly with increase of Al contents in Ni3Al.Addition of Pd and Pt occupying the Ni sublattices does not change the SISF and CSF energies of Ni3Al markedly in comparison with the Ni-23.75Al alloy.While addition of alloying elements,such as Ti,Mo,Ta,W and Re,occupying the Al sublattices dramatically increases the SISF and CSF energies of Ni3Al.The results suggest that the energies of SISF and CSF are dependent both on the Al contents and on the site occupancy of the ternary alloying element in Ni3Al intermetallic alloys.
基金the Natural Science Foundation of China(Grant No:22309180)Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No:XDB0600000,XDB0600400)+3 种基金Liaoning Binhai Laboratory,(Grant No:LILBLB-2023-04)Dalian Revitalization Talents Program(Grant No:2022RG01)Youth Science and Technology Foundation of Dalian(Grant No:2023RQ015)the University of Waterloo.
文摘Zinc-air batteries(ZABs)are promising energy storage systems because of high theoretical energy density,safety,low cost,and abundance of zinc.However,the slow multi-step reaction of oxygen and heavy reliance on noble-metal catalysts hinder the practical applications of ZABs.Therefore,feasible and advanced non-noble-metal elec-trocatalysts for air cathodes need to be identified to promote the oxygen catalytic reaction.In this review,we initially introduced the advancement of ZABs in the past two decades and provided an overview of key developments in this field.Then,we discussed the work-ing mechanism and the design of bifunctional electrocatalysts from the perspective of morphology design,crystal structure tuning,interface strategy,and atomic engineering.We also included theoretical studies,machine learning,and advanced characterization technologies to provide a comprehensive understanding of the structure-performance relationship of electrocatalysts and the reaction pathways of the oxygen redox reactions.Finally,we discussed the challenges and prospects related to designing advanced non-noble-metal bifunctional electrocatalysts for ZABs.
基金Projects(L2014051,LT2014004)supported by the Program for Scientific Technology Plan of the Educational Department of Liaoning Province,China
文摘The structural, elastic, electronic and optical properties for U3Si2-type AlSc2Si2 compound under pressure were systematically investigated by using the first-principles calculations. The values of elastic constants and elastic moduli indicate that AlSc2Si2 keeps mechanical stability under high pressure. The mechanical properties of AISc2Si2 are compared with those of Al3Sc. The results indicate that AlSc2Si2 is harder than AI3Sc. Anisotropic constant AU and 3D curved surface of elastic moduli predict that AISc2Si2 is obviously anisotropic under pressure. The electronic structure of AlSc2Si2 exhibits metallic character and the metallicity decreases with the elevated pressure. In addition, optical properties as a function of pressure were calculated and analyzed. The present work provides theoretical support for further experimental work and industrial applications.
基金Project(2011DFA50520)supported by International Cooperation Project Supported by Ministry of Science and Technology of ChinaProjects(51204147,51274175)supported by the National Natural Science Foundation of China+1 种基金Projects(2011-key6,2013-81)supported by Research Project Supported by Shanxi Scholarship Council of ChinaProjects(2013081017,2012081013)supported by International Cooperation Project Supported by Shanxi Province,China
文摘The Ni （001） surface, Ni3Nb （001） surface and Ni （001）/Ni3Nb （001） interfaces were studied using the first-principles pseudopotential plane-wave method. The adhesion work, thermal stability and electronic structure of Ni/Ni3Nb （001） interfaces were calculated to expound the influence of atom termination and stacking sequence on the interface strength and stability. Simulated results indicate that Ni and Ni3Nb （001） surface models with more than eight atomic layers exhibit bulk-like interior. The （Ni＋Nb）-terminated interface with hollow site stacking has the largest cohesive strength and critical stress for crack propagation and the best thermal stability among the four models. This interfacial Ni and the first nearest neighbor Nb atoms form covalent bonds across the interface region, which are mainly contributed by Nb 4d and Ni 3d valence electrons. By comparison, the thermal stability of Ni/Ni3Nb （001） interfaces is worse than Ni/Ni3A1 （001） interface, implying that the former is harder to form. But the Ni/Ni3Nb interface can improve the mechanical properties ofNi-based superalloys.
基金ACKNOWLEDGMENTS This work was supported by the National Natural Science Foundation of China （No.10804001 and No.11074003）, the Scientific Research Foundation for the Returned Overseas Chinese Scholars, State Education Ministry, and the program for innovative research team in Anhui Normal University of China.
文摘We have investigated properties of the compound LuAlO3：Ce^3＋ associated with the Ce^3＋ 4f-5d transition by using the periodic density functional theory. A hybrid functional has been used for the 4f states and a constrained approach has been employed for the excited 5d state. It is found that the average distance between Ce^3＋ and the eight nearest-neighbor O atoms decrease by 0.05 A on going from 4f to 5d state. The calculated Stokes shift is in good agreement with experiment. Based on the optimized structure around Ce^3＋, the energy level scheme of the 5d states has been evaluated using the angular overlap model, in reasonable agreement with experiment.
基金Project supported by the State Key Development Program for Basic Research of China (Grant No 2006CB605102)
文摘A model system consisting of Ni[001]（100）/Ni3Al[001]（100） multi-layers are studied using the density functional theory in order to explore the elastic properties of single crystal Ni-based superalloys. Simulation results are consistent with the experimental observation that rafted Ni-base superalloys virtually possess a cubic symmetry. The convergence of the elastic properties with respect to the thickness of the multilayers are tested by a series of multilayers from 2γ′＋2γto 10γ′＋10γ atomic layers. The elastic properties are found to vary little with the increase of the multilayer＇s thickness. A Ni/Ni3Al multilayer with 10γ′＋10γ atomic layers （3.54 nm） can be used to simulate the mechanical properties of Ni-base model superalloys. Our calculated elastic constants, bulk modulus, orientation-dependent shear modulus and Young＇s modulus, as well as the Zener anisotropy factor are all compatible with the measured results of Ni-base model superalloys R1 and the advanced commercial superalloys TMS-26, CMSX-4 at a low temperature. The mechanical properties as a function of the γ′ phase volume fraction are calculated by varying the proportion of the γ and γ′ phase in the multilayers. Besides, the mechanical properties of two-phase Ni/Ni3Al multilayer can be well predicted by the Voigt-Reuss-Hill rule of mixtures.
基金supported by the National Science Fund for Distinguished Young Scholars (62225303)the Fundamental Research Funds for the Central Universities (buctrc202201)+1 种基金China Scholarship Council,and High Performance Computing PlatformCollege of Information Science and Technology,Beijing University of Chemical Technology。
文摘In order to address the output feedback issue for linear discrete-time systems, this work suggests a brand-new adaptive dynamic programming(ADP) technique based on the internal model principle(IMP). The proposed method, termed as IMP-ADP, does not require complete state feedback-merely the measurement of input and output data. More specifically, based on the IMP, the output control problem can first be converted into a stabilization problem. We then design an observer to reproduce the full state of the system by measuring the inputs and outputs. Moreover, this technique includes both a policy iteration algorithm and a value iteration algorithm to determine the optimal feedback gain without using a dynamic system model. It is important that with this concept one does not need to solve the regulator equation. Finally, this control method was tested on an inverter system of grid-connected LCLs to demonstrate that the proposed method provides the desired performance in terms of both tracking and disturbance rejection.
文摘The electronic and magnetic properties of Ce doped SrMnO3 have been investigated us- ing the pseudo-potential plane wave method within the generalized gradient approximation method by first principles. The different Mn-O bond lengths indicate that there is a strong Jahn-Teller distortion of the MnO6 octahedron, which associates with a structural phase transition from cubic symmetry （Pm3m） to tetragonal symmetry （I4/mcm）, and the Jahn- Teller ordering stabilizes a chain like （C-type） antiferromagnetie ground state. The electronic structures indicate that SrMnO3 and Sr1-xCexMnO3 （z=0.125 and 0.25） are semiconductor and metallic, respectively. The doping of SrMnO3 with cerium induces simultaneously a decrease in the electrical resistivity, which can be attributed to the formation of Mn3＋ as a result of charge compensation. The density of states and charge density map present that hybridization exists between some of O bands with those of Mn and Ce bands, the bonding between Sr and O is mainly ionic. Density of states and magnetic moment calculations show that the formal valence state of the Ce ion is trivalence.
基金Project (50861002) supported by the National Natural Science Foundation of ChinaProject (0991051) supported by the Natural Science Foundation of Guangxi Province, China+2 种基金Project (08JJ6001) supported by the Natural Science Foundation of Hunan Province, ChinaProject (KF0803) supported by Key Laboratory of Materials Design and Preparation Technology of Hunan Province, ChinaProject (X071117) supported by the Scientific Research Foundation of Guangxi University, China
文摘The structural stability, electronic and elastic properties of Pd3-xRhxV alloys with L12 and D022 structures were investigated theoretically by the first-principles calculations. The results reveal that with the increase of Rh content, the unit cell volume of Pd3-xRhxV alloys with L12 and D022 structures decreases, and the structure of Pd3-xRhxV alloys tends to transform from D022 to L12. The elastic parameters such as elastic constants, bulk modulus, shear modulus, elastic modulus, and Poisson ratio, were calculated and discussed in details. Electronic structures were also computed to reveal the underlying mechanism for the stability and elastic properties.
基金Supported by the National Natural Science Foundation of China (Nos. 50862005,51062005,91022034 and 91022027)the Jiangxi Natural Science Foundation and Cooperative Project (Nos. 2008GZC000,2009JX02060,2010GQW0038 and [2008]212)+1 种基金Foundation of Jiangxi Educational Committee (GJJ11204)the Jiangxi Colleges and Universities "Advanced Ceramics" scientific and technological innovation team
文摘The structural,electronic and optical properties of KNbO 3 （KN）,NaNbO3（NN）and K05 Na0.5NbO3（KNN） in paraelectric cubic phase were calculated employing the plane-wave pseudopotential method based on density functional theory （DFT）.The calculated electronic structures of the three crystals show similar features in the valence bands and the lower conduction bands.However,the structures in higher conduction bands differ markedly due to the effect of Na and K atoms.The calculated optical properties reveal that the features of optical spectrum at low energy are dominated by the transitions from O2p valence bands to Nb 4d conduction bands and those at high energy are related to the transitions to K 4s4p and/or Na 3s3p states.Moreover,the optical constants of KNN are approximately the average of KN and NN at high energy.Therefore,the optical properties of KNN in high energy region can probably be altered by changing the ratio of Na/K.
