(1-3)-β-D葡聚糖联合降钙素原、CD4^(+)T淋巴细胞多指标在艾滋病患者马尔尼菲篮状菌感染早期诊断临床研究

目的探讨(1-3)-β-D葡聚糖联合降钙素原(procalcitonin,PCT)、CD4^(+)T淋巴细胞多指标在艾滋病患者马尔尼菲篮状菌感染早期诊断临床研究。方法回顾性选取我院2020年1月—2022年6月住院的120例艾滋病患者为研究对象。依据实验室结果,将其分为马尔尼菲篮状菌感染确诊组(血或组织液培育养出马尔尼菲篮状菌),简称A组(62例),及马尔尼菲篮状菌感染临床诊断组[根据临床症状、体征、血常规及(1-3)-β-D葡聚糖、PCT、CD4^(+)T淋巴细胞多指标诊断],简称B组(58例)。检测患者(1-3)-β-D葡聚糖、PCT、CD4^(+)T淋巴细胞的表达水平,采用受试者工作特征(receiver-operating characteristic,ROC)曲线下面积(area under the curve,AUC)评估上述指标联合检测对艾滋病患者感染马尔尼菲篮状菌的诊断效能。结果A组的(1-3)-β-D葡聚糖和PCT水平均高于B组,CD4^(+)T淋巴细胞个数低于B组(P<0.05);(1-3)-β-D葡聚糖、PCT、CD4^(+)T淋巴细胞联合检测的AUC为0.933,(1-3)-β-D葡聚糖单独检测的AUC是0.812,PCT单独检测的AUC为0.883,CD4^(+)T淋巴细胞单独检测的AUC是0.810,(1-3)-β-D葡聚糖、PCT和CD4^(+)T淋巴细胞联合检测的AUC皆优于三项单独检测,表明(1-3)-β-D葡聚糖、PCT和CD4^(+)T淋巴细胞联合检测的诊断价值皆优于单一指标诊断,且联合检测的特异度、约登指数分别为92.43%和0.580,均高于三项单独检测。结论(1-3)-β-D葡聚糖联合PCT和CD4^(+)T淋巴细胞多指标对艾滋病马尔尼菲篮状菌感染具有非常高的临床诊断价值,能够帮助医生分析出高危风险患者,及时制定治疗方案,同时也承担预后效果的判断依据,对治疗艾滋病马尔尼菲篮状菌感染具有非常重要的研究价值。

1例RHD-CE(3-7)-D基因重组与RHCE变异型患者的血清学与分子生物学分析

目的 研究分析1例Rh血型弱D、弱cE患者的血清学与分子生物学特征,为该类患者的临床安全输血提供实验依据。方法 采用微柱凝胶卡法对患者红细胞进行ABO、RhDCcEe抗原的鉴定,同时采用试管法进行血型复核,抗人球蛋白卡法筛查不规则抗体;采用PCR-SSP法对RhDCcEe(RhD、RhC、Rhc、RhE、Rhe)基因型进行检测;三代全长测序技术对RHD/RHCE基因序列进行测序分析。结果 微柱凝胶卡法鉴定ABO、RhD、RhCcEe血型抗原的结果为:A抗原(-)、B抗原(-)、RhD(1+)、RhC(4+)、Rhc(1+)、RhE(1+)、Rhe(4+)、对照孔(-);试管法ABO、RhD、RhCcEe抗原鉴定该患者表型为:A抗原(-)、B抗原(-)、RhD(w+)、RhC(4+)、Rhc(w+)、RhE(w+)、Rhe(4+),对照管(-);抗人球蛋白卡法筛查患者不规则抗体阴性;PCR-SSP法血型基因分型RhDCcEe结果:RhD(+)、RhC(+)、Rhc(+)、RhE(+)、Rhe(+);RHD/RHCE基因结果:RHD单倍体1为外显子1-10全缺失,而单倍体2为外显子RHD-CE基因重组融合,且确认其重组类型为RHD-CE(3-7)-D,起点在外显子2(g.20238-20312之间),终点在外显子8(g49184-50480之间),同时RHCE基因第6外显子存在新碱基点突变RHCE*cE(827C>A)。结论RHD-CE(3-7)-D基因重组融合与RHCE*cE(827C>A)新等位基因突变可能引起D、cE血型抗原弱表达,为临床安全输血提供了重要的实验数据支持。

Deployment Reliability Test and Assessment for Landing Gear of Chang' E-3 Probe

Chang'E-3 probe incorporates four landing gears to assure the soft-landing,which are stowed while launching and deployed after separated from rocket. Deployment reliability is quite crucial for this mission. The deployment reliability test( DRT) method and assessment method were developed in this paper. Then DRT was conducted and the deployment reliability estimate of Chang'E-3probe was used to verify the proposed methods.

Accuracy Assessment of Alos W3d30, Aster Gdem and Srtm30 Dem: A Case Study of Nigeria, West Africa

Digital Elevation Models (DEMs) depict the configuration of the earth surface and are being applied in many areas in earth and environmental sciences. In this study, the accuracy of the Advanced Land Observing Satellite World 3D Digital Surface Model version 2.1 (ALOS W3D30), the Shuttle Radar Topography Mission Digital Elevation Model version 3.0 (SRTM30) and the Advanced Space borne Thermal Emission and Reflection Radiometer Global DEM version 2.0 (ASTER GDEM2) was statistically assessed using high accuracy GPS survey data. Root-Mean-Square errors of ~5.40 m, ~7.47 m and ~20.03 m were obtained for ALOS W3D30, SRTM30 and ASTER GDEM2 respectively. In further analyses, we discovered that ALOS W3D30 and SRTM30 were much more accurate in regions where the height intervals were within 201 m - 400 m and >801 m. ALOS W3D30 proved to be the most accurate DEM that best represents the topography of the earth’s surface and could be used for some earth and environmental applications in Nigeria. We recommend that this study should serve as a guide in the use of any of these DEMs for earth and environmental applications in Nigeria.

Movement Function Assessment Based on Human Pose Estimation from Multi-View

Human pose estimation is a basic and critical task in the field of computer vision that involves determining the position(or spatial coordinates)of the joints of the human body in a given image or video.It is widely used in motion analysis,medical evaluation,and behavior monitoring.In this paper,the authors propose a method for multi-view human pose estimation.Two image sensors were placed orthogonally with respect to each other to capture the pose of the subject as they moved,and this yielded accurate and comprehensive results of three-dimensional(3D)motion reconstruction that helped capture their multi-directional poses.Following this,we propose a method based on 3D pose estimation to assess the similarity of the features of motion of patients with motor dysfunction by comparing differences between their range of motion and that of normal subjects.We converted these differences into Fugl–Meyer assessment(FMA)scores in order to quantify them.Finally,we implemented the proposed method in the Unity framework,and built a Virtual Reality platform that provides users with human–computer interaction to make the task more enjoyable for them and ensure their active participation in the assessment process.The goal is to provide a suitable means of assessing movement disorders without requiring the immediate supervision of a physician.

Spatiotemporal Evolution Analysis of the 3-D Deformation Field of Land Subsidence in Beijing after the South-to-North Water Diversion Project

The implementation of the South-to-North Water Diversion Project (SNWDP) has alleviated groundwater resource pressure in North China to some extent, resulting in a gradual deceleration of land subsidence and even rebound in some areas. To investigate the spatiotemporal evolution characteristics of land subsidence in the eastern plain of Beijing following the SNWDP, this study employs Ascending (ASC) and Descending (DES) InSAR data combined with a Strain Model (SM) to obtain a Three-Dimensional (3-D) deformation field from 2016 to 2018. Through analysis of the 3-D deformation characteristics and spatiotemporal evolution of land subsidence in this region from 2016 to 2018, the results reveal a shift in the distribution of subsiding areas after the South-to-North Water Diversion, with a marked decrease in subsidence rates in certain areas. The maximum subsidence rate in the Beijing area has decreased to 110 mm/yr, accompanied by horizontal deformation at a rate of 12 mm/yr. Additionally, by examining the spatial relationship between major active faults and subsidence deformation in this region, the study further elucidates the influence of fault activity on the spatial distribution of subsidence deformation.

基于二萘并[2,3-B∶2′,3′-D]呋喃基团的高效窄发射蓝光OLED器件

高效率窄光谱蓝色有机电致发光器件(OLED)是柔性显示领域的研究重点之一。本文以二萘并[2,3-B∶2′,3′-D]呋喃为弱电子受体、N-(4-联苯基)-1-萘胺作为电子给体设计合成了一种D-A-D型蓝光分子DPF-NA,其在正己烷溶液中的发射峰位于441 nm。理论计算与光物理测试结果显示DPF-NA具有杂化局域电荷转移激发态(HLCT)特性,兼具局域态(LE)高发光效率与电荷转移态(CT)高激子利用率特征,在二氯甲烷溶液中的光致发光量子效率(PLQY)为81.2%。基于质量分数3%DPF-NA掺杂浓度的OLED器件电致发光(EL)峰位于455 nm,半峰宽(FWHM)仅为26 nm,CIE(x,y)坐标为(0.14,0.08),最大外量子效率(EQEmax)为6.76%。

New 4-imino-4H-Chromeno[2,3-d]Pyrimidin-3(5H)-Amine: Synthesis, Cytotoxic Effects on Tumoral Cell Lines and in Silico ADMET Properties

The synthesis of new 4-imino-4H-chromeno[2,3-d]pyrimidin-3(5H)-amine in four steps including one step under microwave dielectric heating is reported. The structural identity of the synthesized compounds was established according to their spectroscopic analysis, such as FT-IR, NMR and mass spectroscopy. These new compounds were tested for their antiproliferative activities on seven representative human tumoral cell lines (Huh7 D12, Caco2, MDA-MB231, MDA-MB468, HCT116, PC3 and MCF7) and also on fibroblasts. Among them, only the compounds 6c showed micromolar cytotoxic activity on tumor cell lines (1.8 50 50 > 25 μM). Finally, in silico ADMET studies ware performed to investigate the possibility of using of the identified compound 6c as potential anti-tumor compound.

Decision-making of biomass ethanol fuel policy based on life cycle 3E assessment

To evaluate the environmental, economic, energy performance of biomass ethanol fuel in China and to support the decision-making of biomass ethanol energy policy, an assessment method of life cycle 3E (economy, environment, energy) was applied to the three biomass ethanol fuel cycle alternatives, which includes cassava-based, corn-based and wheat-based ethanol fuel. The assessments provide a comparison of the economical performance, energy efficiency and environmental impacts of the three alternatives. And the development potential of the three alternatives in China was examined. The results are very useful for the Chinese government to make decisions on the biomass ethanol energy policy, and some advises for the decision-making of Chinese government were given.

血浆(1-3)-β-D葡聚糖诊断新生儿侵袭性真菌感染的价值

探讨在针对新生儿侵袭性真菌感染的诊断中使用血浆(1-3)-β-D葡聚糖能够产生的诊断效能。方法 选取2021年1月到2022年2月因为侵袭性真菌感染于医院寻求医疗干预的新生儿总共60例作为本次研究的一部分研究对象记为1组;另外选取60例健康婴儿作为2组;统计、对比两组患者的血浆(1-3)-β-D葡聚糖水平、CD4+T淋巴细胞数水平;整理PCR技术针对1组患者诊断结果,将其与血浆(1-3)-β-D葡聚糖诊断侵袭性真菌感染的诊断效能进行对比。结果 研究结果显示1组患者的血浆(1-3)-β-D葡聚糖水平、CD4+T淋巴细胞数水平较之于2组患者存在明显差异,1组患者血浆(1-3)-β-D葡聚糖水平更高,而CD4+T淋巴细胞数水平明显更低;P<0.05。在针对诊断效能的考察上,血浆(1-3)-β-D葡聚糖诊断效能和PCR诊断结果之间在灵敏度、特异度方面差异不大,P>0.05。结论 针对罹患侵袭性真菌感染的新生儿使用血浆(1-3)-β-D葡聚糖进行检查,一定程度上能够确保诊断结果的严谨程度,可使用。

血浆(1,3)-β-D葡聚糖检测在侵袭性真菌感染诊断中的价值分析

研究血浆(1,3)-β-D葡聚糖检测技术(G实验)应用于侵袭性真菌感染(IFI)诊断中的应用价值。方法 选择我院在2023年1月至2024年1月期间收治的100例高危型侵袭型真菌感染患者,应用MB-80微生物快速检测动态系统以及对应的试剂对患者的血浆(1,3)-β-D葡聚糖进行检测,分析真菌培养、G实验和联合检测结果;三种方法的诊断效能;三种方法的ROC曲线。结果 确诊IFI阳性共28例,阴性共72例;联合检测的诊断效能高于真菌培养或者G实验。联合检测面积高于单一检测。结论 在侵袭性真菌感染的诊断中,应用血浆(1,3)-β-D葡聚糖检测,诊断效能良好,在和传统真菌培养技术联合检测下,可进一步提升诊断效能。

Resolution assessment of the three-dimensional acquisition geometry of the Anhui experiment in"Geoscience Yangtze Plan"

According to the actual observation conditions of the Yangtze River valley from Anqing city to Maanshan city,we designed the 3D acquisition geometry,and applied the multi-scale checkerboard semblance analysis to assess the preliminary resolution of the designed observation.The checkerboard semblance tests use the refraction and reflection travel-time simultaneous inversion algorithm to quantitatively provide both resolution assessment of velocity structure and Moho topography.The multi-scale checker-board semblance recovery results show that while the chec-kerboard semblance threshold value is 0.5,the preliminary resolution of the designed acquisition geometry is better than 10 km in the upper crust(the depth is less than 10 km),around 15 km in the mid-crust(the depth is 10?25 km),and better than 20 km in the lower crust(the depth is 25?33 km).The preliminary tomographic resolution for the Moho topography is about 20 km in the ray-path coverage area beneath the acquisition geometry.While the checkerboard semblance threshold value is 0.75,the preliminary resolution is 20 km in the upper crust,around 20?25 km in the mid-crust and 25 km in the lower crust.And the preliminary tomographic resolution for the Moho topography is better than 30 km in the ray-path coverage area beneath the acquisition geometry.These non-linear checkerboard tests reveal that the designed acquisition geometry is suitable to image the crustal velocity structure of the Yangtze River valley in the Anhui province.

Exposure Assessment of Sb2O3 in PET Food Contact Materials

This study was conducted to do exposure assessment of the possible migration of antimony trioxide （Sb203） from Polyethylene terephthalate （PET） food contact materials （FCM）. Consumption Factor （CF） and Food-type Distribution Factor （fT） were calculated from survey data with reference to the US FDA method. The most conservative migration conditions were obtained by testing Sb migration from PET FCM based on the Chinese national standard of GB/T 5009.101-2003[1].

Introduction of New Method on Engineering Risk Assessment:Engineering Errors and Effects Analysis(3EA)

Construction and commissioning accidents investigation shows that engineer’s errors in basic and detailed phases are the main causes.It will be gained more efficiency of investment when a relevant method is applied for error identification and risk assessment in basic and detailed phases.Most of risk assessment methods are related to construction phase,meanwhile hidden risks that were happen in previous phases cannot be found by these methods.Although HAZOP study can be applied in detail phase but it can help to find process defections.Importance of identifying risks in basic and detailed phases is to apply preventive actions against birth and grows risks.This risk assessment method can reduce costs and improve environmental protection,safety,and reliability of designs.The main purpose of this study is to identify engineer’s errors and analyse their HSE effects.The method is applied in seven oil and gas engineering projects in Iran,raising the level of engineer’s attention to safety precautions and environmentally-friendly design,reducing the cost of improving the level of safety and environmental protection,improving environmental protection,safety,and design reliability,and improving procedures related to design process and control have been achieved.

Heath Assessment Method of EMU Trains in Level 3-5 Maintenance and Repair

An accurate and objective assessment of the health status of EMU trains is of great importance.In order to make sure the trains are functional,reliable,and endurable in their full life cycle(FLC),health assessment method for EMU trains after Level 3-5 maintenance and repair is studied.First,the element-selection principles and the assessment rules are defined;second,to present the complex topological relationship between the elements in assessment,a functional logical structure construction method is proposed;third,a health value calculation model is defined based on the element’s characteristics and their logical structures.The health variables of each element is calculated and fitted following the steps in the corresponding weight calculation methods.The assessment method is proved to be applicable and effective.

深部真菌感染患者血浆1-3-β-D葡聚糖检测的临床意义

目的探讨深部真菌感染患者血浆1-3-β-D葡聚糖检测的临床意义。方法 应用ME-80微生物动态快速 检测系统,及GKT-5M Set动态真菌检测试剂盒定量检测血浆中1-3-β-D葡聚糖的含量。结果正常对照组血浆 1-3-β-D葡聚糖含量为(2.83士2.57)μg／L;深部真菌感染组为(54.06士36.13)μg／L,经t检验分析,对照组与深部 真菌感染组1-3-β-D葡聚糖平均值差异非常显著(t=7.741,P<0.001)。结论 血浆葡聚糖检测可在拟诊早期为 临床医生提供机体是否感染真菌的可靠信息,是一种实用的真菌感染早期诊断方法。

三乙基苄基氯化铵催化下水介质中吡喃并[2，3-d]嘧啶衍生物的一步合成

以芳亚甲基丙二腈、1,3-二甲基巴比妥酸为原料,以水为溶剂,在100℃以三乙基苄基氯化铵(TEBAC)为催化剂合成了一系列的吡喃并[2,3-d]嘧啶衍生物,该方法具有反应条件温和,产率良好(78%～90%)和环境友好等优点.产物的结构通过IR,1H NMR和元素分析表征,并进一步通过X射线衍射分析确证.

基于小波变换的显微图像清晰度评价函数及3-D自动调焦技术

提出了基于小波变换的图像清晰度评价函数。采用大NA(数值孔径)和小NA的显微图像序列,比较分析了本文提出的评价函数和经典的归一化方差函数、熵函数、能量拉普拉斯函数以及另外两种基于小波变换评价函数的清晰度评价性能。同时采用带有标准偏差为25的高斯噪声显微图像序列,比较了这五种评价函数的抗噪能力。实验结果表明:提出的评价函数具有最高的聚焦精度和聚焦分辨率,且具有与抗噪能力最强的归一化方差函数相当的抗噪能力。提出了基于区域选择的自动聚焦方法,实现了处于不同深度的微操作对象的3-D自动聚焦。该评价函数和区域选择聚焦技术可以用于高精度的自动微操作作业中。进一步说明自动调焦是实现自动化微操作的关键技术,而其核心是清晰度评价函数的选取或构建。

3-D颞骨模型的制作与应用

目的探讨利用粉末堆积打印技术制作的高仿真3-D颞骨模型在解剖技能训练及模拟手术中的应用。方法利用高分辨率CT获取活体颞骨断层图像(正常人2例,慢性中耳炎患者2例),数据导入Mimics软件行图像分割及颞骨三维重建,以石膏粉末为原料,利用粉末堆积快速成型技术打印出颞骨模型,重要解剖结构与组织(听骨链、面神经、位听器、炎性渗出及胆脂瘤等)以不同颜色打印,并在显微镜下进行手术演练。结果颞骨模型的硬度与人骨相近,模型表面及内部骨性标志明显,解剖精确度高,钻磨触感接近真实,满足颞骨解剖技能训练及模拟手术的要求。结论利用粉末堆积打印技术能制作出仿真度更高、更接近实际人体解剖结构的颞骨模型,帮助临床医生在术前全面了解患者的颞骨及周围组织解剖结构与病变情况,制定和优化手术方案,减少并发症。

4-(对取代苯基)-2-[2-(取代苯基)呋喃-4-甲酰胺]-1',3',4'-均三唑[1,2-d]-1,3,4-噻二唑类衍生物的合成和生物活性

以1-氨基-5-巯基-2-(对取代苯基)-1,3,4-均三唑和5-取代苯基-2-呋喃甲酰异硫氰酸酯为原料,合成了10个未见文献报道的含苯环连呋喃的均三唑并噻二唑类衍生物,通过元素分析,1HNMR,IR和MS确定化合物的结构,初步生物活性测试表明标题化合物具有一定的除草活性.