期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
Early Clinical Outcomes with a 3-D Porous Titanium Acetabular Cup
1
作者 Tatsuya Sueyoshi E. Michael Keating +2 位作者 Merrill A. Ritter John B. Meding Matthew J. Brunsman 《Open Journal of Orthopedics》 2016年第6期121-125,共5页
Cementless acetabular components are associated with a significant incidence of polyethylene wear and secondary osteolysis. 3-dimentional (3-D) porous coating and enhanced shell to a liner fixation are expected to red... Cementless acetabular components are associated with a significant incidence of polyethylene wear and secondary osteolysis. 3-dimentional (3-D) porous coating and enhanced shell to a liner fixation are expected to reduce the polyethylene wear and to increase the longevity of an acetabular cup. The authors report the early clinical outcome with a cementless acetabular cup, Regenerex Ringloc+ (Zimmer Biomet, Warsaw, IN) for total hip arthroplasty. Between 2007 and 2013, the registry with 476 hip joints was reviewed retrospectively. There were 210 (48.4%) female and 224 (51.6%) male patients. The average age of the patients at the surgery was 63.9 (± 12.0) years and the average follow-up period was 2.6 years [0.5, 6.5]. At the final follow-up, there was no loosening or cup failure. There were 2 infections, 1 dislocation and 1 liner fracture, resulting in revision hip surgery. Average Harris hip score improved from 53.9 preoperatively to 91.4 postoperatively. The survivorship of Regenerex Ring Loc+ cup and the low complication rate is comparable with previous studies using other 3-D porous metal prostheses. Although this short-term outcome from the institute is very encouraging, a longer follow-up study is required. 展开更多
关键词 Total Hip Arthroplasty (THA) 3-d Porous Regenerex Ringloc+ Clinical Outcome complicATION
下载PDF
三维复杂槽型车刀片切屑折断界限的研究 被引量:3
2
作者 刘二亮 韩荣第 +2 位作者 谭光宇 李振加 张慧萍 《哈尔滨理工大学学报》 CAS 2008年第4期109-113,共5页
在金属切削过程中,采用三维复杂断屑槽断屑是实现切屑控制的有效手段之一.在切削试验的基础上提出了三维复杂断屑槽型的切屑折断界限曲线;分析了非直槽型、凸曲面槽型对切屑的约束作用,建立了切屑折断界限的数学模型;为验证切屑折断界... 在金属切削过程中,采用三维复杂断屑槽断屑是实现切屑控制的有效手段之一.在切削试验的基础上提出了三维复杂断屑槽型的切屑折断界限曲线;分析了非直槽型、凸曲面槽型对切屑的约束作用,建立了切屑折断界限的数学模型;为验证切屑折断界限数学模型进行了钢外圆车削的断屑试验.试验结果证明切屑折断界限数学模型是合理的. 展开更多
关键词 金属切削 三维复杂槽型 切屑控制 切屑折断界限
下载PDF
可转位刀片断屑槽对切屑卷曲半径影响的分析
3
作者 苏宏志 《装备制造技术》 2015年第3期120-122,共3页
在对断屑槽形状和切屑向上卷曲分析基础上,研究了三种典型断屑槽对切屑影响作用,并计算切屑卷曲半径的大小,对切屑折断预测提供了一定的借鉴作用。
关键词 三维复杂断屑槽 断屑单元 切屑卷曲半径
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部