Reconstruction of 3-D digital cores using a hybrid method

A 3-D digital core describes the pore space microstructure of rocks. An X-ray micro CT scan is the most accurate and direct but costly method to obtain a 3-D digital core. In this study, we propose a hybrid method which combines sedimentation simulation and simulated annealing （SA） method to generate 3-D digital cores based on 2-D images of rocks. The method starts with the sedimentation simulation to build a 3-D digital core, which is the initial configuration for the SA method. We update the initial digital core using the SA method to match the auto-correlation function of the 2-D rock image and eventually build the final 3-D digital core. Compared with the typical SA method, the hybrid method has significantly reduced the computation time. Local porosity theory is applied to quantitatively compare the reconstructed 3-D digital cores with the X-ray micro CT 3-D images. The results indicate that the 3-D digital cores reconstructed by the hybrid method have homogeneity and geometric connectivity similar to those of the X-ray micro CT image. The formation factors and permeabilities of the reconstructed 3-D digital cores are estimated using the finite element method （FEM） and lattice Boltzmann method （LBM）, respectively. The simulated results are in good agreement with the experimental measurements. Comparison of the simulation results suggests that the digital cores reconstructed by the hybrid method more closely reflect the true transport properties than the typical SA method alone.

Digital light processing based multimaterial 3D printing:challenges,solutions and perspectives

Multimaterial(MM)3D printing shows great potential for application in metamaterials,flexible electronics,biomedical devices and robots,since it can seamlessly integrate distinctive materials into one printed structure.Among numerous MM 3D printing technologies,digital light processing(DLP)MM 3D printing is compatible with a wide range of materials from hydrogels to ceramics,and can print MM 3D structures with high resolution,high complexity and fast speed.This paper introduces the fundamental mechanisms of DLP 3D printing,and reviews the recent advances of DLP MM 3D printing technologies with emphasis on material switching methods and material contamination issues.It also summarizes a number of typical examples of DLP MM 3D printing systems developed in the past decade,and introduces their system structures,working principles,material switching methods,residual resin removal methods,printing steps,as well as the representative structures and applications.Finally,we provide perspectives on the directions of the further development of DLP MM 3D printing technology.

The Application of Digital Optical 3D Image Analyzer Evaskin in The Evaluation of Wrinkles

To verify the effectiveness of digital optical 3D image analyzer EvaSKIN in the objective and quantitative evaluation of wrinkles.A total of 115 subjects were recruited,the facial images of the subjects were collected by digital optical 3D image analyzer and manual camera,the changes of crow’s feet with age were analyzed.Pictures obtained by manual photography can be directly used for observation and preliminary grading of wrinkles.However,the requirements for evaluators are high,and the results are prone to errors,which will affect the accuracy of the evaluation.Therefore,skilled raters are needed.Compared with the manual photography method,the digital optical 3D image analyzer EvaSKIN can realize three-dimensional extraction of wrinkles,and obtain the change trend of crow’s feet with age.20~30 years old,wrinkles begin to appear slowly;wrinkles will increase rapidly at the age of 30~50;The length of 50~60 year old wrinkles is basically fixed,the wrinkles develop longitudewise,gradually widen and deepen,and the area,depth and volume increase is obvious,and the skin aging condition is intensified.the digital optical 3D image analyzer EvaSKIN realizes the 3D extraction of wrinkles,quantifies the circumference,area,average depth,maximum depth and volume of wrinkles,realizes the objective and quantitative evaluation of wrinkle state,is more accurate in the measurement of wrinkles,and provides a new instrument and method for the evaluation of wrinkles.it is a perfect and supplement to the traditional evaluation methods,and to a certain extent,it helps the research and development and evaluation institutions of cosmetics to obtain more abundant and three-dimensional data support.

(1-3)-β-D葡聚糖联合降钙素原、CD4^(+)T淋巴细胞多指标在艾滋病患者马尔尼菲篮状菌感染早期诊断临床研究

目的探讨(1-3)-β-D葡聚糖联合降钙素原(procalcitonin,PCT)、CD4^(+)T淋巴细胞多指标在艾滋病患者马尔尼菲篮状菌感染早期诊断临床研究。方法回顾性选取我院2020年1月—2022年6月住院的120例艾滋病患者为研究对象。依据实验室结果,将其分为马尔尼菲篮状菌感染确诊组(血或组织液培育养出马尔尼菲篮状菌),简称A组(62例),及马尔尼菲篮状菌感染临床诊断组[根据临床症状、体征、血常规及(1-3)-β-D葡聚糖、PCT、CD4^(+)T淋巴细胞多指标诊断],简称B组(58例)。检测患者(1-3)-β-D葡聚糖、PCT、CD4^(+)T淋巴细胞的表达水平,采用受试者工作特征(receiver-operating characteristic,ROC)曲线下面积(area under the curve,AUC)评估上述指标联合检测对艾滋病患者感染马尔尼菲篮状菌的诊断效能。结果A组的(1-3)-β-D葡聚糖和PCT水平均高于B组,CD4^(+)T淋巴细胞个数低于B组(P<0.05);(1-3)-β-D葡聚糖、PCT、CD4^(+)T淋巴细胞联合检测的AUC为0.933,(1-3)-β-D葡聚糖单独检测的AUC是0.812,PCT单独检测的AUC为0.883,CD4^(+)T淋巴细胞单独检测的AUC是0.810,(1-3)-β-D葡聚糖、PCT和CD4^(+)T淋巴细胞联合检测的AUC皆优于三项单独检测,表明(1-3)-β-D葡聚糖、PCT和CD4^(+)T淋巴细胞联合检测的诊断价值皆优于单一指标诊断,且联合检测的特异度、约登指数分别为92.43%和0.580,均高于三项单独检测。结论(1-3)-β-D葡聚糖联合PCT和CD4^(+)T淋巴细胞多指标对艾滋病马尔尼菲篮状菌感染具有非常高的临床诊断价值,能够帮助医生分析出高危风险患者,及时制定治疗方案,同时也承担预后效果的判断依据,对治疗艾滋病马尔尼菲篮状菌感染具有非常重要的研究价值。

1例RHD-CE(3-7)-D基因重组与RHCE变异型患者的血清学与分子生物学分析

目的 研究分析1例Rh血型弱D、弱cE患者的血清学与分子生物学特征,为该类患者的临床安全输血提供实验依据。方法 采用微柱凝胶卡法对患者红细胞进行ABO、RhDCcEe抗原的鉴定,同时采用试管法进行血型复核,抗人球蛋白卡法筛查不规则抗体;采用PCR-SSP法对RhDCcEe(RhD、RhC、Rhc、RhE、Rhe)基因型进行检测;三代全长测序技术对RHD/RHCE基因序列进行测序分析。结果 微柱凝胶卡法鉴定ABO、RhD、RhCcEe血型抗原的结果为:A抗原(-)、B抗原(-)、RhD(1+)、RhC(4+)、Rhc(1+)、RhE(1+)、Rhe(4+)、对照孔(-);试管法ABO、RhD、RhCcEe抗原鉴定该患者表型为:A抗原(-)、B抗原(-)、RhD(w+)、RhC(4+)、Rhc(w+)、RhE(w+)、Rhe(4+),对照管(-);抗人球蛋白卡法筛查患者不规则抗体阴性;PCR-SSP法血型基因分型RhDCcEe结果:RhD(+)、RhC(+)、Rhc(+)、RhE(+)、Rhe(+);RHD/RHCE基因结果:RHD单倍体1为外显子1-10全缺失,而单倍体2为外显子RHD-CE基因重组融合,且确认其重组类型为RHD-CE(3-7)-D,起点在外显子2(g.20238-20312之间),终点在外显子8(g49184-50480之间),同时RHCE基因第6外显子存在新碱基点突变RHCE*cE(827C>A)。结论RHD-CE(3-7)-D基因重组融合与RHCE*cE(827C>A)新等位基因突变可能引起D、cE血型抗原弱表达,为临床安全输血提供了重要的实验数据支持。

Experimental Study on Full-Surface Buckling of Variable Curvature Cylindrical Shell Using Multi-camera 3D-DIC System

To achieve full-surface strain measurement of variable curvature objects,a 360°3D digital image correlation(DIC)system is proposed.The measurement system consists of four double-camera systems,which capture the object’s entire surface from multiple angles,enabling comprehensive full-surface measurement.To increase the stitching quality,a hierarchical coordinate matching method is proposed.Initially,a 3D rigid body calibration auxiliary block is employed to track motion trajectory,which enables preliminary matching of four 3D-DIC sub-systems.Subsequently,secondary precise matching is performed based on feature points on the test specimen’s surface.Through the hierarchical coordinate matching method,the local 3D coordinate systems of each double-camera system are unified into a global coordinate system,achieving 3D surface reconstruction of the variable curvature cylindrical shell,and error analysis is conducted on the results.Furthermore,axial compression buckling experiment is conducted to measure the displacement and strain fields on the cylindrical shell’s surface.The experimental results are compared with the finite element analysis,validating the accuracy and effectiveness of the proposed multi-camera 3D-DIC measuring system.

Modeling Methods of 3D Model in Digital Twins

To understand the current application and development of 3D modeling in Digital Twins(DTs),abundant literatures on DTs and 3D modeling are investigated by means of literature review.The transition process from 3D modeling to DTs modeling is analyzed,as well as the current application of DTs modeling in various industries.The application of 3D DTs modeling in the􀀀elds of smartmanufacturing,smart ecology,smart transportation,and smart buildings in smart cities is analyzed in detail,and the current limitations are summarized.It is found that the 3D modeling technology in DTs has broad prospects for development and has a huge impact on all walks of life and even human lifestyles.At the same time,the development of DTs modeling relies on the development and support capabilities of mature technologies such as Big Data,Internet of Things,Cloud Computing,Articial Intelligence,and game technology.Therefore,although some results have been achieved,there are still limitations.This work aims to provide a good theoretical support for the further development of 3D DTs modeling.

基于二萘并[2,3-B∶2′,3′-D]呋喃基团的高效窄发射蓝光OLED器件

高效率窄光谱蓝色有机电致发光器件(OLED)是柔性显示领域的研究重点之一。本文以二萘并[2,3-B∶2′,3′-D]呋喃为弱电子受体、N-(4-联苯基)-1-萘胺作为电子给体设计合成了一种D-A-D型蓝光分子DPF-NA,其在正己烷溶液中的发射峰位于441 nm。理论计算与光物理测试结果显示DPF-NA具有杂化局域电荷转移激发态(HLCT)特性,兼具局域态(LE)高发光效率与电荷转移态(CT)高激子利用率特征,在二氯甲烷溶液中的光致发光量子效率(PLQY)为81.2%。基于质量分数3%DPF-NA掺杂浓度的OLED器件电致发光(EL)峰位于455 nm,半峰宽(FWHM)仅为26 nm,CIE(x,y)坐标为(0.14,0.08),最大外量子效率(EQEmax)为6.76%。

Anisotropic creep behavior of soft-hard interbedded rock masses based on 3D printing and digital imaging correlation technology

Three-dimensional(3D)printing technology is increasingly used in experimental research of geotechnical engineering.Compared to other materials,3D layer-by-layer printing specimens are extremely similar to the inherent properties of natural layered rock masses.In this paper,soft-hard interbedded rock masses with different dip angles were prepared based on 3D printing(3DP)sand core technology.Uniaxial compression creep tests were conducted to investigate its anisotropic creep behavior based on digital imaging correlation(DIC)technology.The results show that the anisotropic creep behavior of the 3DP soft-hard interbedded rock mass is mainly affected by the dip angles of the weak interlayer when the stress is at low levels.As the stress level increases,the effect of creep stress on its creep anisotropy increases significantly,and the dip angle is no longer the main factor.The minimum value of the long-term strength and creep failure strength always appears in the weak interlayer within 30°–60°,which explains why the failure of the layered rock mass is controlled by the weak interlayer and generally emerges at 45°.The tests results are verified by comparing with theoretical and other published studies.The feasibility of the 3DP soft-hard interbedded rock mass provides broad prospects and application values for 3DP technology in future experimental research.

New 4-imino-4H-Chromeno[2,3-d]Pyrimidin-3(5H)-Amine: Synthesis, Cytotoxic Effects on Tumoral Cell Lines and in Silico ADMET Properties

The synthesis of new 4-imino-4H-chromeno[2,3-d]pyrimidin-3(5H)-amine in four steps including one step under microwave dielectric heating is reported. The structural identity of the synthesized compounds was established according to their spectroscopic analysis, such as FT-IR, NMR and mass spectroscopy. These new compounds were tested for their antiproliferative activities on seven representative human tumoral cell lines (Huh7 D12, Caco2, MDA-MB231, MDA-MB468, HCT116, PC3 and MCF7) and also on fibroblasts. Among them, only the compounds 6c showed micromolar cytotoxic activity on tumor cell lines (1.8 50 50 > 25 μM). Finally, in silico ADMET studies ware performed to investigate the possibility of using of the identified compound 6c as potential anti-tumor compound.

Review of Digital Campus Construction Led by Virtual Reality Technology

In recent years,the government has issued a series of documents to promote the construction of digital campuses.This initiative serves to encourage the deep integration of information technology and intelligent technology education and digital reform,the combination of virtual reality and campus management is the need for innovative thinking and economic and social development,and then better change our learning style and living environment.The construction of the digital campus is based on virtual reality technology,BIM,GIS,and three-dimensional modeling technology to provide an immersive platform for students,promote the integration of virtual reality technology and education,help teachers,students,and parents to understand all kinds of education information and resources,to achieve their interoperability.From the off-campus environment to the school teaching equipment,teachers to teaching quality certification,and learning,to extracurricular entertainment,opening ceremonies to graduation parties,to bring more efficient,convenient,and safe campus life for teachers,students,and staff in school,and break the traditional information restrictions.

Application of Digital Technology in Road and Bridge Design

With the development and progress of science and technology,road and bridge design has experienced rapid development,from the initial manual drawing design to the popularity of Computer-Aided Design(CAD),and then to today’s digital software design era.Early designers relied on hand-drawn paper design forms which was time-consuming and error-prone.Digital support for road and bridge design not only saves the design time but the design quality has also achieved a qualitative leap.This paper engages in the application of digital technology in road and bridge design,to provide technical reference for China’s road and bridge engineering design units,to promote the popularity of Civil3D and other advanced design software in the field of engineering design and development,ultimately contributing to the sustainable development of China’s road and bridge engineering.

血浆(1-3)-β-D葡聚糖诊断新生儿侵袭性真菌感染的价值

探讨在针对新生儿侵袭性真菌感染的诊断中使用血浆(1-3)-β-D葡聚糖能够产生的诊断效能。方法 选取2021年1月到2022年2月因为侵袭性真菌感染于医院寻求医疗干预的新生儿总共60例作为本次研究的一部分研究对象记为1组;另外选取60例健康婴儿作为2组;统计、对比两组患者的血浆(1-3)-β-D葡聚糖水平、CD4+T淋巴细胞数水平;整理PCR技术针对1组患者诊断结果,将其与血浆(1-3)-β-D葡聚糖诊断侵袭性真菌感染的诊断效能进行对比。结果 研究结果显示1组患者的血浆(1-3)-β-D葡聚糖水平、CD4+T淋巴细胞数水平较之于2组患者存在明显差异,1组患者血浆(1-3)-β-D葡聚糖水平更高,而CD4+T淋巴细胞数水平明显更低;P<0.05。在针对诊断效能的考察上,血浆(1-3)-β-D葡聚糖诊断效能和PCR诊断结果之间在灵敏度、特异度方面差异不大,P>0.05。结论 针对罹患侵袭性真菌感染的新生儿使用血浆(1-3)-β-D葡聚糖进行检查,一定程度上能够确保诊断结果的严谨程度,可使用。

血浆(1,3)-β-D葡聚糖检测在侵袭性真菌感染诊断中的价值分析

研究血浆(1,3)-β-D葡聚糖检测技术(G实验)应用于侵袭性真菌感染(IFI)诊断中的应用价值。方法 选择我院在2023年1月至2024年1月期间收治的100例高危型侵袭型真菌感染患者,应用MB-80微生物快速检测动态系统以及对应的试剂对患者的血浆(1,3)-β-D葡聚糖进行检测,分析真菌培养、G实验和联合检测结果;三种方法的诊断效能;三种方法的ROC曲线。结果 确诊IFI阳性共28例,阴性共72例;联合检测的诊断效能高于真菌培养或者G实验。联合检测面积高于单一检测。结论 在侵袭性真菌感染的诊断中,应用血浆(1,3)-β-D葡聚糖检测,诊断效能良好,在和传统真菌培养技术联合检测下,可进一步提升诊断效能。

Digital Beamforming by Multiple Chirp Zeta Transforms for 3-D Sonar Imaging Systems

The computational load is prohibitive for real-time image generation in 3-D sonar systems, particularly when the steering angle approximation is required. In this paper, a novel multiple Chirp Zeta Transforms （MCZT） beamforming method in frequency domain is being proposed. The single long-length Chirp Zeta Transform （CZT） in the original CZT beamforming is replaced by several CZTs with smaller lengths for different partitions along each dimension. The implementing routine of the algorithm is also optimized. Furthermore, an avenue to evaluate the estimating error for the angle approximation in 3-D imaging applications is presented, and an approach to attain valid partitions for the steering angles is also flhistrated. This paper demonstrates a few advantages of the proposed frequency-domain beamforming method over existing methods in terms of the computatianal complexity.

Computation of elastic properties of 3D digital cores from the Longmaxi shale

The dependence of elastic moduli of shales on the mineralogy and microstructure of shales is important for the prediction of sweet spots and shale gas production. Based on 3D digital images of the microstructure of Longmaxi black shale samples using X-ray CT, we built detailed 3D digital images of cores with porosity properties and mineral contents. Next, we used finite-element （FE） methods to derive the elastic properties of the samples. The FE method can accurately model the shale mineralogy. Particular attention is paid to the derived elastic properties and their dependence on porosity and kerogen. The elastic moduli generally decrease with increasing porosity and kerogen, and there is a critical porosity （0.75） and kerogen content （ca. ≤3%） over which the elastic moduli decrease rapidly and slowly, respectively. The derived elastic moduli of gas- and oil-saturated digital cores differ little probably because of the low porosity （4.5%） of the Longmaxi black shale. Clearly, the numerical experiments demonstrated the feasibility of combining microstructure images of shale samples with elastic moduli calculations to predict shale properties.

Parallel computing approach for efficient 3-D X-ray-simulated image reconstruction

Accurate 3-dimensional(3-D)reconstruction technology for nondestructive testing based on digital radiography(DR)is of great importance for alleviating the drawbacks of the existing computed tomography(CT)-based method.The commonly used Monte Carlo simulation method ensures well-performing imaging results for DR.However,for 3-D reconstruction,it is limited by its high time consumption.To solve this problem,this study proposes a parallel computing method to accelerate Monte Carlo simulation for projection images with a parallel interface and a specific DR application.The images are utilized for 3-D reconstruction of the test model.We verify the accuracy of parallel computing for DR and evaluate the performance of two parallel computing modes-multithreaded applications(G4-MT)and message-passing interfaces(G4-MPI)-by assessing parallel speedup and efficiency.This study explores the scalability of the hybrid G4-MPI and G4-MT modes.The results show that the two parallel computing modes can significantly reduce the Monte Carlo simulation time because the parallel speedup increment of Monte Carlo simulations can be considered linear growth,and the parallel efficiency is maintained at a high level.The hybrid mode has strong scalability,as the overall run time of the 180 simulations using 320 threads is 15.35 h with 10 billion particles emitted,and the parallel speedup can be up to 151.36.The 3-D reconstruction of the model is achieved based on the filtered back projection(FBP)algorithm using 180 projection images obtained with the hybrid G4-MPI and G4-MT.The quality of the reconstructed sliced images is satisfactory because the images can reflect the internal structure of the test model.This method is applied to a complex model,and the quality of the reconstructed images is evaluated.

血清25-羟维生素-D3 超敏C反应蛋白及心电图参数与ST段抬高型心肌梗死患者介入治疗后发生恶性心律失常的关系

目的:探讨血清25-羟维生素-D3(25-hydroxyvitamin D3,25-(OH)-D3)、超敏C反应蛋白(High sensitivity C-reactive protein,hs-CRP)、心电图参数变化与ST段抬高型心肌梗死(ST segment elevation myocardial infarction,STEMI)患者经皮冠脉介入术(Percutaneous coronary intervention,PCI)后发生恶性心律失常的关系。方法:选取我院2020年1月至2022年6月实施PCI治疗的193例STEMI患者作为研究对象,根据患者术后72h内是否发生恶性心律失常分为心律失常组38例、对照组155例,对比两组患者入院12h内的25-(OH)-D3、hs-CRP、血清电解质、血常规指标、血脂指标、心肌酶学指标,并对患者PCI术后实施连续动态心电图监测,对比两组患者心电图碎裂QRS波、校正Tp-e间期(Corrected Tp-e interval,Tp-ec)、QT离散度(QT dispersion,Qtd),并采用Logistic回归模型分析上述指标与STEMI患者PCI术后发生恶性心律失常的关系。结果:心律失常组患者的血清25-(OH)-D3水平低于对照组,心律失常组患者的血清hs-CRP、Tp-ec测定值、Qtd测定值、碎裂QRS波检出率均高于对照组,上述指标组间差异均具有统计学意义(P<0.05);心律失常组患者的白细胞(White blood cell,WBC)、肌钙蛋白I(Troponin I,cTnI)、肌酸激酶同工酶(Creatine kinase isoenzyme,CK-MB)、肌红蛋白(Myoglobin,MYO)、K+、Mg 2+水平均高于对照组患者,差异具有统计学意义(P<0.05);Logistic回归模型结果显示:cTnI、CK-MB、K+、hs-CRP、Tp-ec、Qtd增高,碎裂QRS波阳性会显著增大STEMI患者PCI后发生恶性心律失常的风险(P<0.05);血清25-(OH)-D3水平增高会降低STEMI患者PCI后发生恶性心律失常的风险(P<0.05)。结论:STEMI患者血清25-(OH)-D3水平降低、hs-CRP增高、PCI术后Tp-ec、Qtd增高、出现碎裂QRS波会增大患者出现恶性心律失常的风险。

Fe_(3)O_(4)/BiOBr/BiOI的制备及降解2,4-D的性能研究

采用水热法制备了微米球花状结构的Fe_(3)O_(4)/BiOBr/BiOI复合材料,通过SEM、XRD、XPS和UV-Vis等手段对催化剂进行表征分析。结果表明,该催化剂对2,4-D具有高效的光降解性能和光催化效率(80 min,88%)。降解速率常数为2.498×10^(-2)min^(-1),分别是Br∶I=5∶5(K=2.004×10^(-2)min^(-1))、BiOBr(K=1.289×10^(-2)min^(-1))和BiOI(K=6.98×10-3min-1)的1.25倍、1.94倍与3.58倍。这是由于Fe_(3)O_(4)/BiOBr/BiOI复合材料内部形成了异质结,利于光生载流子的分离。此外,5次循环实验后,降解效率保持在82.9%,证明该催化剂稳定、可回收、可磁分离。

Dynamic full-color digital holographic 3D display on single DMD

Digital holography has high potentials for future 3D imaging and display technology.We present a method for a dynamic full-color digital holographic 3D display on single digital micro-mirror device(DMD)with full-color,high-speed and high-fidelity characteristics.We combine the square regions of adjacent micro-mirrors into super-pixels that can modulate amplitude and phase independently.Gray images are achieved by amplitude modulation and precise positioning of each color is achieved by phase modulation.The proposed method realizes a full-color imaging based on the three primary colors and achieves measured structural similarity of more than 88%and color similarity of more than 98%,while retaining the high switch speed of 9 kHz,thus achieving dynamic full-color 3D display on charge-coupled device(CCD).