In the design of 3-D spherically symmetric FIR filters via the McClellan transformation, two methods are proposed to determine the transformation parameters. The first is to improve the original 3-D algorithm by explo...In the design of 3-D spherically symmetric FIR filters via the McClellan transformation, two methods are proposed to determine the transformation parameters. The first is to improve the original 3-D algorithm by exploiting the 2-D effective methods in 3-D. This method can change the constrained optimization algorithm into the unconstrained one and makes the design easier to realize. The second method is to solve the coupled equations under constrained conditions and a set of ideal parameters can be gotten. The design example shows that the two methods are all efficient and easier than the original algorithm.展开更多
This paper presents an algorithm for coding video signal based on 3-D wavelet transformation. When the frame order t of a video signal is replaced by order 2, the video signal can be looked as a block in 3-D space. Af...This paper presents an algorithm for coding video signal based on 3-D wavelet transformation. When the frame order t of a video signal is replaced by order 2, the video signal can be looked as a block in 3-D space. After splitting the block into smaller sub-blocks, imitate the method of 2-D wavelet transformation for images, we can transform the sub-blocks with 3-D wavelet. Most of video signal energy is in the decomposed low-frequency sub-bands. These sub-bands affect the visual quality of the video signal most. Quantizing different sub-bands with different precision and then entropy encoding each sub-band, we can eliminate inter- and intra-frame redundancy of the video signal and compress data. Our simulation experiments show that this algorithm can achieve very good result.展开更多
Image fusion is performed between one band of multi-spectral image and two bands of hyperspectral image to produce fused image with the same spatial resolution as source multi-spectral image and the same spectral reso...Image fusion is performed between one band of multi-spectral image and two bands of hyperspectral image to produce fused image with the same spatial resolution as source multi-spectral image and the same spectral resolution as source hyperspeetral image. According to the characteristics and 3-Dimensional （3-D） feature analysis of multi-spectral and hyperspectral image data volume, the new fusion approach using 3-D wavelet based method is proposed. This approach is composed of four major procedures： Spatial and spectral resampling, 3-D wavelet transform, wavelet coefficient integration and 3-D inverse wavelet transform. Especially, a novel method, Ratio Image Based Spectral Resampling （RIBSR）method, is proposed to accomplish data resampling in spectral domain by utilizing the property of ratio image. And a new fusion rule, Average and Substitution （A＆S） rule, is employed as the fusion rule to accomplish wavelet coefficient integration. Experimental results illustrate that the fusion approach using 3-D wavelet transform can utilize both spatial and spectral characteristics of source images more adequately and produce fused image with higher quality and fewer artifacts than fusion approach using 2-D wavelet transform. It is also revealed that RIBSR method is capable of interpolating the missing data more effectively and correctly, and A＆S rule can integrate coefficients of source images in 3-D wavelet domain to preserve both spatial and spectral features of source images more properly.展开更多
This paper presents an optimized 3-D Discrete Wavelet Transform (3-DDWT) architecture. 1-DDWT employed for the design of 3-DDWT architecture uses reduced lifting scheme approach. Further the architecture is optimized ...This paper presents an optimized 3-D Discrete Wavelet Transform (3-DDWT) architecture. 1-DDWT employed for the design of 3-DDWT architecture uses reduced lifting scheme approach. Further the architecture is optimized by applying block enabling technique, scaling, and rounding of the filter coefficients. The proposed architecture uses biorthogonal (9/7) wavelet filter. The architecture is modeled using Verilog HDL, simulated using ModelSim, synthesized using Xilinx ISE and finally implemented on Virtex-5 FPGA. The proposed 3-DDWT architecture has slice register utilization of 5%, operating frequency of 396 MHz and a power consumption of 0.45 W.展开更多
When multiple ground-based radars(GB-rads)are utilized together to resolve three-dimensional(3-D)deformations,the resolving accuracy is related with the measurement geometry constructed by these radars.This paper focu...When multiple ground-based radars(GB-rads)are utilized together to resolve three-dimensional(3-D)deformations,the resolving accuracy is related with the measurement geometry constructed by these radars.This paper focuses on constrained geometry analysis to resolve 3-D deformations from three GB-rads.The geometric dilution of precision(GDOP)is utilized to evaluate 3-D deformation accuracy of a single target,and its theoretical equation is derived by building a simplified 3-D coordinate system.Then for a 3-D scene,its optimal accuracy problem is converted into determining the minimum value of an objective function with a boundary constraint.The genetic algorithm is utilized to solve this constrained optimization problem.Numerical simulations are made to validate the correctness of the theoretical analysis results.展开更多
The computational load is prohibitive for real-time image generation in 3-D sonar systems, particularly when the steering angle approximation is required. In this paper, a novel multiple Chirp Zeta Transforms （MCZT）...The computational load is prohibitive for real-time image generation in 3-D sonar systems, particularly when the steering angle approximation is required. In this paper, a novel multiple Chirp Zeta Transforms （MCZT） beamforming method in frequency domain is being proposed. The single long-length Chirp Zeta Transform （CZT） in the original CZT beamforming is replaced by several CZTs with smaller lengths for different partitions along each dimension. The implementing routine of the algorithm is also optimized. Furthermore, an avenue to evaluate the estimating error for the angle approximation in 3-D imaging applications is presented, and an approach to attain valid partitions for the steering angles is also flhistrated. This paper demonstrates a few advantages of the proposed frequency-domain beamforming method over existing methods in terms of the computatianal complexity.展开更多
The technique of phase measuring profilometry using a single phase step method is proposed.This method can automatically obtain phase value at each pixel by using a discret cosine transform algorithm.The method is abl...The technique of phase measuring profilometry using a single phase step method is proposed.This method can automatically obtain phase value at each pixel by using a discret cosine transform algorithm.The method is able to automatically recognize any position between depression and elevation on an object surface.Theoretical analysis and experimental verification are presented.展开更多
A 3-Dimensional computer aided garment design (CAGD) system has been developed andimplemented on a high-performance workstation. We studied various approaches to the func-tional modelling of garment designs for the sy...A 3-Dimensional computer aided garment design (CAGD) system has been developed andimplemented on a high-performance workstation. We studied various approaches to the func-tional modelling of garment designs for the system. According to the characteristic data of a hu-man body, the models of human body and the garment are displayed on the screen, then we canmodify the garment with various styles and different sizes. The system can transform the 3-Dgarment to the 2-D pieces. The system has improved design efficiency. Various potential alterna-tives and improvement of the system have also been studied and explored.展开更多
Recently,securing Copyright has become a hot research topic due to rapidly advancing information technology.As a host cover,watermarking methods are used to conceal or embed sensitive information messages in such a ma...Recently,securing Copyright has become a hot research topic due to rapidly advancing information technology.As a host cover,watermarking methods are used to conceal or embed sensitive information messages in such a manner that it was undetectable to a human observer in contemporary times.Digital media covers may often take any form,including audio,video,photos,even DNA data sequences.In this work,we present a new methodology for watermarking to hide secret data into 3-D objects.The technique of blind extraction based on reversing the steps of the data embedding process is used.The implemented technique uses the features of the 3-D object vertex’discrete cosine transform to embed a grayscale image with high capacity.The coefficient of vertex and the encrypted picture pixels are used in the watermarking procedure.Additionally,the extraction approach is fully blind and is dependent on the backward steps of the encoding procedure to get the hidden data.Correlation distance,Euclidean distance,Manhattan distance,and the Cosine distance are used to evaluate and test the performance of the proposed approach.The visibility and imperceptibility of the proposed method are assessed to show the efficiency of our work compared to previous corresponding methods.展开更多
In this paper,we establish the exponential convergence theory for the multipole and local expansions,shifting and translation operators for the Green's function of 3-dimensional Laplace equation in layered media.A...In this paper,we establish the exponential convergence theory for the multipole and local expansions,shifting and translation operators for the Green's function of 3-dimensional Laplace equation in layered media.An immediate application of the theory is to ensure the exponential convergence of the FMM which has been shown by the numerical results reported in[27].As the Green's function in layered media consists of free space and reaction field components and the theory for the free space components is well known,this paper will focus on the analysis for the reaction components.We first prove that the density functions in the integral representations of the reaction components are analytic and bounded in the right half complex wave number plane.Then,by using the Cagniard-de Hoop transform and contour deformations,estimates for the remainder terms of the truncated expansions are given,and,as a result,the exponential convergence for the expansions and translation operators is proven.展开更多
In consideration of geometric parameters, several researches have already optimized the thermal efficiency of the cylindrical cavity receiver. However, most of the optimal results have been achieved at a fixed solar r...In consideration of geometric parameters, several researches have already optimized the thermal efficiency of the cylindrical cavity receiver. However, most of the optimal results have been achieved at a fixed solar radiation. At different direct normal irradiance (DNI), any single optimal result may not be suitable enough for different regions over the world. This study constructed a 3-D numerical model of cylindrical cavity receiver with DNI variation. In the model of a cylindrical cavity receiver containing a helical pipe, the heat losses of the cavity and heat transfer of working medium were also taken into account. The simulation results show that for a particular DNI in the range of 400 W/m2 to 800 W/m2, there exists a best design for achieving a highest thermal efficiency of the cavity receiver. Besides, for a receiver in constant geometric parameters, the total heat losses increases dramatically with the DNI increasing in that range, as well as the temperature of the working medium. The thermal efficiency presented a different variation tendency with the heat losses, which is 2.45% as a minimum decline. In summary, this paper proposed an optimization method in the form of a bunch of fitting curves which could be applied to receiver design in different DNI regions, with comparatively appropriate thermal performances.展开更多
It takes a long computer time for 3-D convolution to accomplish 3-D ideal band-pass filtering according to conventional method. The author proposed that 2-D fan filtering or directional filtering can be accomplished b...It takes a long computer time for 3-D convolution to accomplish 3-D ideal band-pass filtering according to conventional method. The author proposed that 2-D fan filtering or directional filtering can be accomplished by using Hilbert transform. This note introduces accomplishment of some kinds of ideal band-pass filtering by Hilbert transform, and then the 3-D convolution becomes a finite number of 1-D convolution series-parallel connected.展开更多
We report for the first time the theoretical analysis and experimental results of a white-light reconstructed monochromatic 3-D image synthesizing tomograms by multiple rainbow holo-graphy with vertical-area partition...We report for the first time the theoretical analysis and experimental results of a white-light reconstructed monochromatic 3-D image synthesizing tomograms by multiple rainbow holo-graphy with vertical-area partition (VAP) approach. The theoretical and experimental results show that 3-D monochromatic image can be synthesized by recording the master hologram by VAP ap-proach without any distortions either in gray scale or in geometrical position. A 3-D monochromatic image synthesized from a series of medical tomograms is presented in this paper for the first time.展开更多
Depth estimation is an active research area with the developing of stereo vision in recent years. It is one of the key technologies to resolve the large data of stereo vision communication. Now depth estimation still ...Depth estimation is an active research area with the developing of stereo vision in recent years. It is one of the key technologies to resolve the large data of stereo vision communication. Now depth estimation still has some problems, such as occlusion, fuzzy edge, real-time processing, etc. Many algorithms have been proposed base on software, however the performance of the computer configurations limits the software processing speed. The other resolution is hardware design and the great developments of the digital signal processor （DSP）, and application specific integrated circuit （ASIC） and field programmable gate array （FPGA） provide the opportunity of flexible applications. In this work, by analyzing the procedures of depth estimation, the proper algorithms which can be used in hardware design to execute real-time depth estimation are proposed. The different methods of calibration, matching and post-processing are analyzed based on the hardware design requirements. At last some tests for the algorithm have been analyzed. The results show that the algorithms proposed for hardware design can provide credited depth map for further view synthesis and are suitable for hardware design.展开更多
Starting with governing equations of a saturated soil with anisotropic permeability and based on multiple integral transforms, an analytical layer-element equation is established explicitly in the Laplace-Fourier tran...Starting with governing equations of a saturated soil with anisotropic permeability and based on multiple integral transforms, an analytical layer-element equation is established explicitly in the Laplace-Fourier transformed domain. A global matrix of layered soil can be obtained by assembling a set of analytical layer-elements, which is further solved in the transformed domain by considering boundary conditions. The numerical inversion of LaplaceFourier trans- form is employed to acquire the actual solution. Numerical analysis for 3-D consolidation with anisotropic permeability of a layered soil system is presented, and the influence of anisotropy of permeability on the consolidation behavior is discussed.展开更多
In order to satisfy the need of diagnoses,based on the characteristic of medical images that a sequence of frames are formed in one body inspection,a new strategy for medical images compression is proposed.The 3-D wav...In order to satisfy the need of diagnoses,based on the characteristic of medical images that a sequence of frames are formed in one body inspection,a new strategy for medical images compression is proposed.The 3-D wavelet is adopted and the planar zerotree is extended to the 3-D zerotree.By making use of the 3-D zerotree structure,a simple method for region of interest(ROI)mask generation is put forward.Medical images are compressed by three-dimensional embedded coding with the compression of regions of interest.Simulation results have shown that it can efficiently improve the compression ratio without affecting the diagnoses.展开更多
文摘In the design of 3-D spherically symmetric FIR filters via the McClellan transformation, two methods are proposed to determine the transformation parameters. The first is to improve the original 3-D algorithm by exploiting the 2-D effective methods in 3-D. This method can change the constrained optimization algorithm into the unconstrained one and makes the design easier to realize. The second method is to solve the coupled equations under constrained conditions and a set of ideal parameters can be gotten. The design example shows that the two methods are all efficient and easier than the original algorithm.
文摘This paper presents an algorithm for coding video signal based on 3-D wavelet transformation. When the frame order t of a video signal is replaced by order 2, the video signal can be looked as a block in 3-D space. After splitting the block into smaller sub-blocks, imitate the method of 2-D wavelet transformation for images, we can transform the sub-blocks with 3-D wavelet. Most of video signal energy is in the decomposed low-frequency sub-bands. These sub-bands affect the visual quality of the video signal most. Quantizing different sub-bands with different precision and then entropy encoding each sub-band, we can eliminate inter- and intra-frame redundancy of the video signal and compress data. Our simulation experiments show that this algorithm can achieve very good result.
文摘Image fusion is performed between one band of multi-spectral image and two bands of hyperspectral image to produce fused image with the same spatial resolution as source multi-spectral image and the same spectral resolution as source hyperspeetral image. According to the characteristics and 3-Dimensional （3-D） feature analysis of multi-spectral and hyperspectral image data volume, the new fusion approach using 3-D wavelet based method is proposed. This approach is composed of four major procedures： Spatial and spectral resampling, 3-D wavelet transform, wavelet coefficient integration and 3-D inverse wavelet transform. Especially, a novel method, Ratio Image Based Spectral Resampling （RIBSR）method, is proposed to accomplish data resampling in spectral domain by utilizing the property of ratio image. And a new fusion rule, Average and Substitution （A＆S） rule, is employed as the fusion rule to accomplish wavelet coefficient integration. Experimental results illustrate that the fusion approach using 3-D wavelet transform can utilize both spatial and spectral characteristics of source images more adequately and produce fused image with higher quality and fewer artifacts than fusion approach using 2-D wavelet transform. It is also revealed that RIBSR method is capable of interpolating the missing data more effectively and correctly, and A＆S rule can integrate coefficients of source images in 3-D wavelet domain to preserve both spatial and spectral features of source images more properly.
文摘This paper presents an optimized 3-D Discrete Wavelet Transform (3-DDWT) architecture. 1-DDWT employed for the design of 3-DDWT architecture uses reduced lifting scheme approach. Further the architecture is optimized by applying block enabling technique, scaling, and rounding of the filter coefficients. The proposed architecture uses biorthogonal (9/7) wavelet filter. The architecture is modeled using Verilog HDL, simulated using ModelSim, synthesized using Xilinx ISE and finally implemented on Virtex-5 FPGA. The proposed 3-DDWT architecture has slice register utilization of 5%, operating frequency of 396 MHz and a power consumption of 0.45 W.
基金supported by the National Natural Science Foundation of China(61960206009,61971037,31727901)the Natural Science Foundation of Chongqing+1 种基金China(2020jcyj-jq X0008)Chongqing Key Laboratory of Geological Environment Monitoring and Disaster Early-warning in Three Gorges Reservoir Area(ZD2020A0101)。
文摘When multiple ground-based radars(GB-rads)are utilized together to resolve three-dimensional(3-D)deformations,the resolving accuracy is related with the measurement geometry constructed by these radars.This paper focuses on constrained geometry analysis to resolve 3-D deformations from three GB-rads.The geometric dilution of precision(GDOP)is utilized to evaluate 3-D deformation accuracy of a single target,and its theoretical equation is derived by building a simplified 3-D coordinate system.Then for a 3-D scene,its optimal accuracy problem is converted into determining the minimum value of an objective function with a boundary constraint.The genetic algorithm is utilized to solve this constrained optimization problem.Numerical simulations are made to validate the correctness of the theoretical analysis results.
基金National High Technology Research and Development Program (863 Program) of China (No. 2010AA09Z104)the Fundamental Research Funds for the Central Universities
文摘The computational load is prohibitive for real-time image generation in 3-D sonar systems, particularly when the steering angle approximation is required. In this paper, a novel multiple Chirp Zeta Transforms （MCZT） beamforming method in frequency domain is being proposed. The single long-length Chirp Zeta Transform （CZT） in the original CZT beamforming is replaced by several CZTs with smaller lengths for different partitions along each dimension. The implementing routine of the algorithm is also optimized. Furthermore, an avenue to evaluate the estimating error for the angle approximation in 3-D imaging applications is presented, and an approach to attain valid partitions for the steering angles is also flhistrated. This paper demonstrates a few advantages of the proposed frequency-domain beamforming method over existing methods in terms of the computatianal complexity.
文摘The technique of phase measuring profilometry using a single phase step method is proposed.This method can automatically obtain phase value at each pixel by using a discret cosine transform algorithm.The method is able to automatically recognize any position between depression and elevation on an object surface.Theoretical analysis and experimental verification are presented.
文摘A 3-Dimensional computer aided garment design (CAGD) system has been developed andimplemented on a high-performance workstation. We studied various approaches to the func-tional modelling of garment designs for the system. According to the characteristic data of a hu-man body, the models of human body and the garment are displayed on the screen, then we canmodify the garment with various styles and different sizes. The system can transform the 3-Dgarment to the 2-D pieces. The system has improved design efficiency. Various potential alterna-tives and improvement of the system have also been studied and explored.
文摘Recently,securing Copyright has become a hot research topic due to rapidly advancing information technology.As a host cover,watermarking methods are used to conceal or embed sensitive information messages in such a manner that it was undetectable to a human observer in contemporary times.Digital media covers may often take any form,including audio,video,photos,even DNA data sequences.In this work,we present a new methodology for watermarking to hide secret data into 3-D objects.The technique of blind extraction based on reversing the steps of the data embedding process is used.The implemented technique uses the features of the 3-D object vertex’discrete cosine transform to embed a grayscale image with high capacity.The coefficient of vertex and the encrypted picture pixels are used in the watermarking procedure.Additionally,the extraction approach is fully blind and is dependent on the backward steps of the encoding procedure to get the hidden data.Correlation distance,Euclidean distance,Manhattan distance,and the Cosine distance are used to evaluate and test the performance of the proposed approach.The visibility and imperceptibility of the proposed method are assessed to show the efficiency of our work compared to previous corresponding methods.
基金supported by the US National Science Foundation (Grant No.DMS-1950471)the US Army Research Office (Grant No.W911NF-17-1-0368)partially supported by NSFC (grant Nos.12201603 and 12022104)。
文摘In this paper,we establish the exponential convergence theory for the multipole and local expansions,shifting and translation operators for the Green's function of 3-dimensional Laplace equation in layered media.An immediate application of the theory is to ensure the exponential convergence of the FMM which has been shown by the numerical results reported in[27].As the Green's function in layered media consists of free space and reaction field components and the theory for the free space components is well known,this paper will focus on the analysis for the reaction components.We first prove that the density functions in the integral representations of the reaction components are analytic and bounded in the right half complex wave number plane.Then,by using the Cagniard-de Hoop transform and contour deformations,estimates for the remainder terms of the truncated expansions are given,and,as a result,the exponential convergence for the expansions and translation operators is proven.
文摘In consideration of geometric parameters, several researches have already optimized the thermal efficiency of the cylindrical cavity receiver. However, most of the optimal results have been achieved at a fixed solar radiation. At different direct normal irradiance (DNI), any single optimal result may not be suitable enough for different regions over the world. This study constructed a 3-D numerical model of cylindrical cavity receiver with DNI variation. In the model of a cylindrical cavity receiver containing a helical pipe, the heat losses of the cavity and heat transfer of working medium were also taken into account. The simulation results show that for a particular DNI in the range of 400 W/m2 to 800 W/m2, there exists a best design for achieving a highest thermal efficiency of the cavity receiver. Besides, for a receiver in constant geometric parameters, the total heat losses increases dramatically with the DNI increasing in that range, as well as the temperature of the working medium. The thermal efficiency presented a different variation tendency with the heat losses, which is 2.45% as a minimum decline. In summary, this paper proposed an optimization method in the form of a bunch of fitting curves which could be applied to receiver design in different DNI regions, with comparatively appropriate thermal performances.
文摘It takes a long computer time for 3-D convolution to accomplish 3-D ideal band-pass filtering according to conventional method. The author proposed that 2-D fan filtering or directional filtering can be accomplished by using Hilbert transform. This note introduces accomplishment of some kinds of ideal band-pass filtering by Hilbert transform, and then the 3-D convolution becomes a finite number of 1-D convolution series-parallel connected.
基金This work was supported by the National Natural Science Foundation of China (Grant No. 69677020) and the Tianjin Foundation of Natural Science for this research.
文摘We report for the first time the theoretical analysis and experimental results of a white-light reconstructed monochromatic 3-D image synthesizing tomograms by multiple rainbow holo-graphy with vertical-area partition (VAP) approach. The theoretical and experimental results show that 3-D monochromatic image can be synthesized by recording the master hologram by VAP ap-proach without any distortions either in gray scale or in geometrical position. A 3-D monochromatic image synthesized from a series of medical tomograms is presented in this paper for the first time.
基金supported by the National Natural Science Foundation of China(Grant Nos.60832003)the Key Laboratory of Advanced Display and System Applications(Shanghai University),Ministry of Education,China(Grant No.P200801)the Science and Technology Commission of Shanghai Municipality(Grant No.10510500500)
文摘Depth estimation is an active research area with the developing of stereo vision in recent years. It is one of the key technologies to resolve the large data of stereo vision communication. Now depth estimation still has some problems, such as occlusion, fuzzy edge, real-time processing, etc. Many algorithms have been proposed base on software, however the performance of the computer configurations limits the software processing speed. The other resolution is hardware design and the great developments of the digital signal processor （DSP）, and application specific integrated circuit （ASIC） and field programmable gate array （FPGA） provide the opportunity of flexible applications. In this work, by analyzing the procedures of depth estimation, the proper algorithms which can be used in hardware design to execute real-time depth estimation are proposed. The different methods of calibration, matching and post-processing are analyzed based on the hardware design requirements. At last some tests for the algorithm have been analyzed. The results show that the algorithms proposed for hardware design can provide credited depth map for further view synthesis and are suitable for hardware design.
基金Project supported by the National Natural Science Foundation of China (No. 50578121)
文摘Starting with governing equations of a saturated soil with anisotropic permeability and based on multiple integral transforms, an analytical layer-element equation is established explicitly in the Laplace-Fourier transformed domain. A global matrix of layered soil can be obtained by assembling a set of analytical layer-elements, which is further solved in the transformed domain by considering boundary conditions. The numerical inversion of LaplaceFourier trans- form is employed to acquire the actual solution. Numerical analysis for 3-D consolidation with anisotropic permeability of a layered soil system is presented, and the influence of anisotropy of permeability on the consolidation behavior is discussed.
基金supported by the National Natural Science Foundation of China(Grant No.60272050).
文摘In order to satisfy the need of diagnoses,based on the characteristic of medical images that a sequence of frames are formed in one body inspection,a new strategy for medical images compression is proposed.The 3-D wavelet is adopted and the planar zerotree is extended to the 3-D zerotree.By making use of the 3-D zerotree structure,a simple method for region of interest(ROI)mask generation is put forward.Medical images are compressed by three-dimensional embedded coding with the compression of regions of interest.Simulation results have shown that it can efficiently improve the compression ratio without affecting the diagnoses.
