A new approach for three dimensional (3-D) shape measurement was proposed based on colorcoded fringe and neural networks. By applying the phase-shift technique to fringe projection, point clouds were generated with hi...A new approach for three dimensional (3-D) shape measurement was proposed based on colorcoded fringe and neural networks. By applying the phase-shift technique to fringe projection, point clouds were generated with high spatial resolution and limited accuracy. The picture element correspondence problem was solved by using projected color-coded fringes with different orientations. Once the high accurate corresponding points were decided, high precision dense 3-D points cloud was calculated by the well trained net. High spatial resolution can be obtained by the phase-shift technique and high accuracy 3-D object point coordinates are achieved by the well trained net, which is not dependent on the camera model and will work for any type of camera. Some experiments verify the performance of this method.展开更多
Dithering optimization techniques can be divided into the phase-optimized technique and the intensity-optimized technique. The problem with the former is the poor sensitivity to various defocusing amounts, and the pro...Dithering optimization techniques can be divided into the phase-optimized technique and the intensity-optimized technique. The problem with the former is the poor sensitivity to various defocusing amounts, and the problem with the latter is that it cannot enhance phase quality directly nor efficiently. In this paper, we present a multi-objective optimization framework for three-dimensional(3D) measurement by utilizing binary defocusing technique. Moreover, a binary patch optimization technique is used to solve the time-consuming issue of genetic algorithm. It is demonstrated that the presented technique consistently obtains significant phase performance improvement under various defocusing amounts.展开更多
Although automobile is an indispensable vehicle to modern life, it also serves as a social problem with a big traffic accident. Among the reasons of traffic accidents, careless driving accounts for the largest part. S...Although automobile is an indispensable vehicle to modern life, it also serves as a social problem with a big traffic accident. Among the reasons of traffic accidents, careless driving accounts for the largest part. So in order to avoid the careless driving, a system which can measure the posture of a driver and warns driver to drive carefully in the case of looking aside is necessary. Although the image measurement method is used broadly, there is a problem on which measurement accuracy is influenced by environment light, makeup of the driver, etc. in the general method based on the two-dimensional image. Therefore, in this study, we propose an image measurement method to obtain the head posture of driver. First we use three-dimensional measurement method which based on the infrared pattern projection to get 3-D information of head, and then we calculate the angle for faces. In this paper, we explain the composition method of an experiment system, and the results of head posture measurement experiment.展开更多
A new 3D surface contouring and ranging system based on digital fringe projection and phase shifting technique is presented. Using the phase-shift technique, points cloud with high spatial resolution and limited accur...A new 3D surface contouring and ranging system based on digital fringe projection and phase shifting technique is presented. Using the phase-shift technique, points cloud with high spatial resolution and limited accuracy can be generated. Stereo-pair images obtained from two cameras can be used to compute 3D world coordinates of a point using traditional active triangulation approach, yet the camera calibration is crucial. Neural network is a well-known approach to approximate a nonlinear system without an explicit physical model, in this work it is used to train the stereo vision application system to calculating 3D world coordinates such that the camera calibration can be bypassed. The training set for neural network consists of a variety of stereo-pair images and the corresponding 3D world coordinates. The picture elements correspondence problem is solved by using projected color-coded fringes with different orientations. Color imbalance is completely eliminated by the new color-coded method. Once the high accuracy correspondence of 2D images with 3D points is acquired, high precision 3D points cloud can be recognized by the well trained net. The obvious advantage of this approach is that high spatial resolution can be obtained by the phase-shifting technique and high accuracy 3D object point coordinates are achieved by the well trained net which is independent of the camera model works for any type of camera. Some experiments verified the performance of the method.展开更多
According to turbulent theory and characteristics of beam blank continuous casting, 3-D model to represent the flow of beam blank mould is established. The predicted results indicate that the exit obliquity of up 15...According to turbulent theory and characteristics of beam blank continuous casting, 3-D model to represent the flow of beam blank mould is established. The predicted results indicate that the exit obliquity of up 15°(+15°) should be adopted, which will benefit the floatation of non-metallic inclusion and purification of the molten steel. When the nozzle angle is 120°, the flow pattern is reasonable. Proper nozzle depth can be 200mm. Turbulent kinetic of meniscus can be reduced by adopting the square nozzle and suitable area of side outlet when casting speed increases. The results are consistent with those of water model experiment, so the model is exact and reasonable. The model can provide important information for design of SEN and defining of immersion depth.展开更多
The laser scanning and CCD image-transmitting measurement method and principle on acquiring 3-D curved surface shape data are discussed. Computer processing technique of 3-D curved surface shape(be called“ 3 - D surf...The laser scanning and CCD image-transmitting measurement method and principle on acquiring 3-D curved surface shape data are discussed. Computer processing technique of 3-D curved surface shape(be called“ 3 - D surface shape”for short) data is analysed. This technique in- cludes these concrete methods and principles such as data smoothing, fitting, reconstructing ,elimi- nating and so on. The example and result about computer processing of 3- D surface shape data are given .展开更多
This paper describes a multiple camera-based method to reconstruct the 3D shape of a human foot. From a foot database, an initial 3D model of the foot represented by a cloud of points is built. The shape parameters, w...This paper describes a multiple camera-based method to reconstruct the 3D shape of a human foot. From a foot database, an initial 3D model of the foot represented by a cloud of points is built. The shape parameters, which can characterize more than 92% of a foot, are defined by using the principal component analysis method. Then, using "active shape models", the initial 3D model is adapted to the real foot captured in multiple images by applying some constraints (edge points' distance and color variance). We insist here on the experiment part where we demonstrate the efficiency of the proposed method on a plastic foot model, and also on real human feet with various shapes. We propose and compare different ways of texturing the foot which is needed for reconstruction. We present an experiment performed on the plastic foot model and on human feet and propose two different ways to improve the final 3D shapers accuracy according to the previous experiments' results. The first improvement proposed is the densification of the cloud of points used to represent the initial model and the foot database. The second improvement concerns the projected patterns used to texture the foot. We conclude by showing the obtained results for a human foot with the average computed shape error being only 1.06 mm.展开更多
In this paper,a high-accuracy 3-D deformation measurement(HADM)method with structured light is proposed and applied to wing deformation measurement in wind tunnel experiments.The present method employs an arbitrarily ...In this paper,a high-accuracy 3-D deformation measurement(HADM)method with structured light is proposed and applied to wing deformation measurement in wind tunnel experiments.The present method employs an arbitrarily arranged fringe projector and a perpendicularly placed camera.The exact phase-height mapping using the phase differences of the projected sinusoidal fringe patterns,as well as the spatial distribution of the fringe,is accurately derived.It not only presents high feasibility but also reduces systemic uncertainties arising from deviations between the ideal model and the real-world conditions.Meanwhile,a dynamic boundary process algorithm is proposed to reduce the measurement uncertainty caused by fringe fracture near the object boundary.It is calibrated that a high accuracy with the average measurement uncertainty of 0.0237 mm is achieved,which is less than 0.01%of the side length of 25 cm of the field of view.In the wind tunnel experiments,the 3-D deformations of the elastic wing,particularly the key geometric parameters such as wing tip position,angle of attack,and dihedral angle,are well reconstructed to provide an in-depth explanation for the aerodynamic characteristics.展开更多
On the basis of the objective functions,dithering optimization techniques can be divided into the intensity-based optimization technique and the phase-based optimization technique.However,both types of techniques are ...On the basis of the objective functions,dithering optimization techniques can be divided into the intensity-based optimization technique and the phase-based optimization technique.However,both types of techniques are spatial-domain optimization techniques,while their measurement performances are essentially determined by the harmonic components in the frequency domain.In this paper,a novel genetic optimization technique in the frequency domain is proposed for highquality fringe generation.In addition,to handle the time-consuming difficulty of genetic algorithm(GA),we first optimize a binary patch,then join the optimal binary patches together according to periodicity and symmetry so as to generate a full-size pattern.It is verified that the proposed technique can significantly enhance the measured performance and ensure the robustness to various amounts of defocusing.展开更多
A new phase unwrapping method based on dual-frequency fringe is proposed to improve both high accuracy and large measurement range of three-dimensional shape measurement by synthesizing the projected dual-frequency fr...A new phase unwrapping method based on dual-frequency fringe is proposed to improve both high accuracy and large measurement range of three-dimensional shape measurement by synthesizing the projected dual-frequency fringes obtaining higher and lower frequencies.The lower-frequency one is their phase difference,which can help unwrap the wrapped phase of the higher-frequency one from their phase sum.In addition,the relationship between the measuring accuracy and the frequencies of the projected fringes is studied to guide the frequency selection in actual measurement.It is found that the closer the two frequencies are,the higher the measurement accuracy will be.The computer simulation and experiment results show the viability of this method.展开更多
Based on the computer integrated and flexible laser p rocessing system, we developed an intelligent measuring sub-system. A novel mod el has been built to compensate the deviations of the main frame-structure, and a l...Based on the computer integrated and flexible laser p rocessing system, we developed an intelligent measuring sub-system. A novel mod el has been built to compensate the deviations of the main frame-structure, and a laser tracker system is applied to calibrate the accuracy of the system. Anal yzing the characteristics of all kind surfaces of automobile outer penal moulds and dies, the surface and border to be measured and processed are classified int o four types. A 2-D adaptive measuring method based on Bzier curve and a 3 -D adaptive measuring method based on Spline curve are developed for different types of surface. During the data processing, a 3-D probe compensation method i s described in details. The control software of the sub-measuring system is des cribed. Some measuring experiments are carried out to testify the methods.展开更多
In order to simultaneously attack a target with impact angle constraint in threedimensional(3-D) space, a novel distributed cooperative guidance law for multiple missiles under directed communication topologies is pro...In order to simultaneously attack a target with impact angle constraint in threedimensional(3-D) space, a novel distributed cooperative guidance law for multiple missiles under directed communication topologies is proposed without radial velocity measurements. First, based on missiles-target 3-D relative motion equations, the multiple missiles cooperative guidance model with impact angle constraint is constructed. Then, in Line-of-Sight(LOS) direction, based on multiagent system cooperative control theory, one guidance law with directed topologies is designed with strict proof, which can guarantee finite time consensus of multiple missiles' impact times. Next, in elevation direction and azimuth direction of LOS, based on homogeneous system stability theory and integral sliding mode control theory, two guidance laws are proposed respectively with strict proof, which can guarantee LOS angles converge to desired values and LOS angular rates converge to zero in finite time. Finally, the effectiveness of the designed cooperative guidance law is demonstrated through simulation results.展开更多
基金Supported by the Eleventh Five-Year Pre-Research Project of China
文摘A new approach for three dimensional (3-D) shape measurement was proposed based on colorcoded fringe and neural networks. By applying the phase-shift technique to fringe projection, point clouds were generated with high spatial resolution and limited accuracy. The picture element correspondence problem was solved by using projected color-coded fringes with different orientations. Once the high accurate corresponding points were decided, high precision dense 3-D points cloud was calculated by the well trained net. High spatial resolution can be obtained by the phase-shift technique and high accuracy 3-D object point coordinates are achieved by the well trained net, which is not dependent on the camera model and will work for any type of camera. Some experiments verify the performance of this method.
基金Project supported by the Zhejiang Provincial Welfare Technology Applied Research Project,China(Grant No.2017C31080)
文摘Dithering optimization techniques can be divided into the phase-optimized technique and the intensity-optimized technique. The problem with the former is the poor sensitivity to various defocusing amounts, and the problem with the latter is that it cannot enhance phase quality directly nor efficiently. In this paper, we present a multi-objective optimization framework for three-dimensional(3D) measurement by utilizing binary defocusing technique. Moreover, a binary patch optimization technique is used to solve the time-consuming issue of genetic algorithm. It is demonstrated that the presented technique consistently obtains significant phase performance improvement under various defocusing amounts.
文摘Although automobile is an indispensable vehicle to modern life, it also serves as a social problem with a big traffic accident. Among the reasons of traffic accidents, careless driving accounts for the largest part. So in order to avoid the careless driving, a system which can measure the posture of a driver and warns driver to drive carefully in the case of looking aside is necessary. Although the image measurement method is used broadly, there is a problem on which measurement accuracy is influenced by environment light, makeup of the driver, etc. in the general method based on the two-dimensional image. Therefore, in this study, we propose an image measurement method to obtain the head posture of driver. First we use three-dimensional measurement method which based on the infrared pattern projection to get 3-D information of head, and then we calculate the angle for faces. In this paper, we explain the composition method of an experiment system, and the results of head posture measurement experiment.
基金Supported by the Eleventh Five-Year Pre-research Project of China.
文摘A new 3D surface contouring and ranging system based on digital fringe projection and phase shifting technique is presented. Using the phase-shift technique, points cloud with high spatial resolution and limited accuracy can be generated. Stereo-pair images obtained from two cameras can be used to compute 3D world coordinates of a point using traditional active triangulation approach, yet the camera calibration is crucial. Neural network is a well-known approach to approximate a nonlinear system without an explicit physical model, in this work it is used to train the stereo vision application system to calculating 3D world coordinates such that the camera calibration can be bypassed. The training set for neural network consists of a variety of stereo-pair images and the corresponding 3D world coordinates. The picture elements correspondence problem is solved by using projected color-coded fringes with different orientations. Color imbalance is completely eliminated by the new color-coded method. Once the high accuracy correspondence of 2D images with 3D points is acquired, high precision 3D points cloud can be recognized by the well trained net. The obvious advantage of this approach is that high spatial resolution can be obtained by the phase-shifting technique and high accuracy 3D object point coordinates are achieved by the well trained net which is independent of the camera model works for any type of camera. Some experiments verified the performance of the method.
文摘According to turbulent theory and characteristics of beam blank continuous casting, 3-D model to represent the flow of beam blank mould is established. The predicted results indicate that the exit obliquity of up 15°(+15°) should be adopted, which will benefit the floatation of non-metallic inclusion and purification of the molten steel. When the nozzle angle is 120°, the flow pattern is reasonable. Proper nozzle depth can be 200mm. Turbulent kinetic of meniscus can be reduced by adopting the square nozzle and suitable area of side outlet when casting speed increases. The results are consistent with those of water model experiment, so the model is exact and reasonable. The model can provide important information for design of SEN and defining of immersion depth.
文摘The laser scanning and CCD image-transmitting measurement method and principle on acquiring 3-D curved surface shape data are discussed. Computer processing technique of 3-D curved surface shape(be called“ 3 - D surface shape”for short) data is analysed. This technique in- cludes these concrete methods and principles such as data smoothing, fitting, reconstructing ,elimi- nating and so on. The example and result about computer processing of 3- D surface shape data are given .
基金This work was supported by Grant-in-Aid for Scientific Research (C) (No.17500119)
文摘This paper describes a multiple camera-based method to reconstruct the 3D shape of a human foot. From a foot database, an initial 3D model of the foot represented by a cloud of points is built. The shape parameters, which can characterize more than 92% of a foot, are defined by using the principal component analysis method. Then, using "active shape models", the initial 3D model is adapted to the real foot captured in multiple images by applying some constraints (edge points' distance and color variance). We insist here on the experiment part where we demonstrate the efficiency of the proposed method on a plastic foot model, and also on real human feet with various shapes. We propose and compare different ways of texturing the foot which is needed for reconstruction. We present an experiment performed on the plastic foot model and on human feet and propose two different ways to improve the final 3D shapers accuracy according to the previous experiments' results. The first improvement proposed is the densification of the cloud of points used to represent the initial model and the foot database. The second improvement concerns the projected patterns used to texture the foot. We conclude by showing the obtained results for a human foot with the average computed shape error being only 1.06 mm.
基金supported by the National Natural Science Foundation of China (Grant Nos.12127802 and 11721202)。
文摘In this paper,a high-accuracy 3-D deformation measurement(HADM)method with structured light is proposed and applied to wing deformation measurement in wind tunnel experiments.The present method employs an arbitrarily arranged fringe projector and a perpendicularly placed camera.The exact phase-height mapping using the phase differences of the projected sinusoidal fringe patterns,as well as the spatial distribution of the fringe,is accurately derived.It not only presents high feasibility but also reduces systemic uncertainties arising from deviations between the ideal model and the real-world conditions.Meanwhile,a dynamic boundary process algorithm is proposed to reduce the measurement uncertainty caused by fringe fracture near the object boundary.It is calibrated that a high accuracy with the average measurement uncertainty of 0.0237 mm is achieved,which is less than 0.01%of the side length of 25 cm of the field of view.In the wind tunnel experiments,the 3-D deformations of the elastic wing,particularly the key geometric parameters such as wing tip position,angle of attack,and dihedral angle,are well reconstructed to provide an in-depth explanation for the aerodynamic characteristics.
基金Project supported by the Science and Technology Major Projects of Zhejiang Province,China(Grant No.2017C31080)
文摘On the basis of the objective functions,dithering optimization techniques can be divided into the intensity-based optimization technique and the phase-based optimization technique.However,both types of techniques are spatial-domain optimization techniques,while their measurement performances are essentially determined by the harmonic components in the frequency domain.In this paper,a novel genetic optimization technique in the frequency domain is proposed for highquality fringe generation.In addition,to handle the time-consuming difficulty of genetic algorithm(GA),we first optimize a binary patch,then join the optimal binary patches together according to periodicity and symmetry so as to generate a full-size pattern.It is verified that the proposed technique can significantly enhance the measured performance and ensure the robustness to various amounts of defocusing.
基金supported by the National Natural Science Foundation of China(No.62075143)。
文摘A new phase unwrapping method based on dual-frequency fringe is proposed to improve both high accuracy and large measurement range of three-dimensional shape measurement by synthesizing the projected dual-frequency fringes obtaining higher and lower frequencies.The lower-frequency one is their phase difference,which can help unwrap the wrapped phase of the higher-frequency one from their phase sum.In addition,the relationship between the measuring accuracy and the frequencies of the projected fringes is studied to guide the frequency selection in actual measurement.It is found that the closer the two frequencies are,the higher the measurement accuracy will be.The computer simulation and experiment results show the viability of this method.
文摘Based on the computer integrated and flexible laser p rocessing system, we developed an intelligent measuring sub-system. A novel mod el has been built to compensate the deviations of the main frame-structure, and a laser tracker system is applied to calibrate the accuracy of the system. Anal yzing the characteristics of all kind surfaces of automobile outer penal moulds and dies, the surface and border to be measured and processed are classified int o four types. A 2-D adaptive measuring method based on Bzier curve and a 3 -D adaptive measuring method based on Spline curve are developed for different types of surface. During the data processing, a 3-D probe compensation method i s described in details. The control software of the sub-measuring system is des cribed. Some measuring experiments are carried out to testify the methods.
基金supported by the National Natural Science Foundation of China(Nos.61603114,61673135)
文摘In order to simultaneously attack a target with impact angle constraint in threedimensional(3-D) space, a novel distributed cooperative guidance law for multiple missiles under directed communication topologies is proposed without radial velocity measurements. First, based on missiles-target 3-D relative motion equations, the multiple missiles cooperative guidance model with impact angle constraint is constructed. Then, in Line-of-Sight(LOS) direction, based on multiagent system cooperative control theory, one guidance law with directed topologies is designed with strict proof, which can guarantee finite time consensus of multiple missiles' impact times. Next, in elevation direction and azimuth direction of LOS, based on homogeneous system stability theory and integral sliding mode control theory, two guidance laws are proposed respectively with strict proof, which can guarantee LOS angles converge to desired values and LOS angular rates converge to zero in finite time. Finally, the effectiveness of the designed cooperative guidance law is demonstrated through simulation results.