With the wide use of three-dimensional woven spacer composites(3DWSCs),the market expects greater mechanical properties from this material.By changing the weft fastening method of the traditional I-shape pile yarns,we...With the wide use of three-dimensional woven spacer composites(3DWSCs),the market expects greater mechanical properties from this material.By changing the weft fastening method of the traditional I-shape pile yarns,we designed three-dimensional woven spacer fabrics(3DWSFs)and 3DWSCs with the weft V-shape to improve the compression performance of traditional 3DWSFs.The effects of weft binding structures,V-pile densities,and V-shaped angle were investigated in this paper.It is found that the compression resistance of 3DWSFs with the weft V-shape is improved compared to that with the weft I-shape,the fabric height recovery rate is as high as 95.7%,and the average elastic recovery rate is 59.39%.When the interlayer pile yarn density is the same,the weft V-shaped and weft I-shaped 3DWSCs have similar flatwise pressure and edgewise pressure performance.The compression properties of the composite improve as the density of the V-pile yarns increases.The flatwise compression load decreases as the V-shaped angle decreases.When the V-shaped angle is 28°and 42°,the latitudinal V-shaped 3DWSCs perform exceptionally well in terms of anti-compression cushioning.The V-shaped weft binding method offers a novel approach to structural design of 3DWSCs.展开更多
A micro mechanical model is carried out to predict micro stresses and macro elastic properties of 3-D woven composites. A unit cell is composed of two phases. One is fiber yarn and the other is resin or fiber yarn in ...A micro mechanical model is carried out to predict micro stresses and macro elastic properties of 3-D woven composites. A unit cell is composed of two phases. One is fiber yarn and the other is resin or fiber yarn in transverse. The additional shearing introduced by bending of fiber yarn is considered. The method to determine the microstructure is also discussed. This model is applied to the analysis of a 3-D woven graphite/epoxy composite. Micro stresses of the cell are studied, and then macro modulus is obtained by employing the average method. The predictions agree well with experimental results.展开更多
In order to give a true reflection of the spatial structure of woven fabric, a circular mathematical model is established based on the Peirce＇s model and the principle of the coordinate transformation. The circular m...In order to give a true reflection of the spatial structure of woven fabric, a circular mathematical model is established based on the Peirce＇s model and the principle of the coordinate transformation. The circular model uses arcs and tangent lines as the yarn flexion shape and selects the circle as the yarn cross-section. Then, a new elliptical cross-section mathematical model is rapidly built by the Jaeobian transformation of the circular model. The Matiab software is used for the 3D simulation. It is shown that 3D simulations of woven fabrics with different weft and warp yarn counts, weft and warp densities, structure phases, weaves and flattening coefficients are successfully realized by Matiab basing on the elliptical mathematical model.展开更多
In order to avoid the delamination of traditional laminated tubular composites,on an ordinary loom,the 3D woven special⁃shaped square tubular fabrics were woven with environment⁃friendly basalt filament yarns,and then...In order to avoid the delamination of traditional laminated tubular composites,on an ordinary loom,the 3D woven special⁃shaped square tubular fabrics were woven with environment⁃friendly basalt filament yarns,and then the 3D woven special⁃shaped square tubular composites were prepared with epoxy resin by a vacuum⁃assisted resin transfer molding(VARTM)process.Through experiments and software fitting,the axial compression properties of composites were analyzed.The polynomial fitting formulas of load⁃displacement curve and energy⁃displacement curve were obtained by using least square methods.The results showed that the 3D woven special⁃shaped square tubular composites had good axial compression performance,and with the increase of the composite thickness,compressive strength and energy absorption increased significantly.The failure mode was analyzed in the paper,thus revealing the failure stress propagation,local stress concentration,and failure morphology.It provides an effective reference for the design and application of the 3D woven special⁃shaped square tubular composite.展开更多
The yarn architecture of 3-D braided composites products by the four-step 1×1 braiding technique has been studied by means of a control volume method in conjunction with experimental investigation and a numerical...The yarn architecture of 3-D braided composites products by the four-step 1×1 braiding technique has been studied by means of a control volume method in conjunction with experimental investigation and a numerical method, respectively. An ellipse assumption for the cross-section of yarn was proposed in this analysis method with considering the yarn size and yarn-packing factor. Two types of local unit cell structures were identified for 4-step braided composites by considering the nature of the braiding processes and by observing the sample cross-sections. The relationship between the braiding procedure and the properties for 3-D braided structural shapes was established. This method provides the basis for analyzing stiffness and strength of 3-D braided composites.展开更多
We propose a novel 3-dimensional hollow waveguide with a variable air core for widely tunable devices.We observed a wavelength shift of 1.8 nm in a hollow waveguide resonator with a displacement of 6μm in an air core.
基金Fundamental Research Funds for the Central Universities,China(Nos.2232022D-11 and 22D128102/007)Jiangsu Transformation and Upgrading Funding Program for Industrial and Information Industry,ChinaShanghai Natural Science Foundation of Shanghai Municipal Science and Technology Commission,China(No.20ZR1401600)。
文摘With the wide use of three-dimensional woven spacer composites(3DWSCs),the market expects greater mechanical properties from this material.By changing the weft fastening method of the traditional I-shape pile yarns,we designed three-dimensional woven spacer fabrics(3DWSFs)and 3DWSCs with the weft V-shape to improve the compression performance of traditional 3DWSFs.The effects of weft binding structures,V-pile densities,and V-shaped angle were investigated in this paper.It is found that the compression resistance of 3DWSFs with the weft V-shape is improved compared to that with the weft I-shape,the fabric height recovery rate is as high as 95.7%,and the average elastic recovery rate is 59.39%.When the interlayer pile yarn density is the same,the weft V-shaped and weft I-shaped 3DWSCs have similar flatwise pressure and edgewise pressure performance.The compression properties of the composite improve as the density of the V-pile yarns increases.The flatwise compression load decreases as the V-shaped angle decreases.When the V-shaped angle is 28°and 42°,the latitudinal V-shaped 3DWSCs perform exceptionally well in terms of anti-compression cushioning.The V-shaped weft binding method offers a novel approach to structural design of 3DWSCs.
文摘A micro mechanical model is carried out to predict micro stresses and macro elastic properties of 3-D woven composites. A unit cell is composed of two phases. One is fiber yarn and the other is resin or fiber yarn in transverse. The additional shearing introduced by bending of fiber yarn is considered. The method to determine the microstructure is also discussed. This model is applied to the analysis of a 3-D woven graphite/epoxy composite. Micro stresses of the cell are studied, and then macro modulus is obtained by employing the average method. The predictions agree well with experimental results.
文摘In order to give a true reflection of the spatial structure of woven fabric, a circular mathematical model is established based on the Peirce＇s model and the principle of the coordinate transformation. The circular model uses arcs and tangent lines as the yarn flexion shape and selects the circle as the yarn cross-section. Then, a new elliptical cross-section mathematical model is rapidly built by the Jaeobian transformation of the circular model. The Matiab software is used for the 3D simulation. It is shown that 3D simulations of woven fabrics with different weft and warp yarn counts, weft and warp densities, structure phases, weaves and flattening coefficients are successfully realized by Matiab basing on the elliptical mathematical model.
基金Natural Science Foundation of Liaoning Province,China(No.2019⁃MS⁃017)。
文摘In order to avoid the delamination of traditional laminated tubular composites,on an ordinary loom,the 3D woven special⁃shaped square tubular fabrics were woven with environment⁃friendly basalt filament yarns,and then the 3D woven special⁃shaped square tubular composites were prepared with epoxy resin by a vacuum⁃assisted resin transfer molding(VARTM)process.Through experiments and software fitting,the axial compression properties of composites were analyzed.The polynomial fitting formulas of load⁃displacement curve and energy⁃displacement curve were obtained by using least square methods.The results showed that the 3D woven special⁃shaped square tubular composites had good axial compression performance,and with the increase of the composite thickness,compressive strength and energy absorption increased significantly.The failure mode was analyzed in the paper,thus revealing the failure stress propagation,local stress concentration,and failure morphology.It provides an effective reference for the design and application of the 3D woven special⁃shaped square tubular composite.
基金Aeronautical Science Foundation of China ( 99B2 3 0 0 1)
文摘The yarn architecture of 3-D braided composites products by the four-step 1×1 braiding technique has been studied by means of a control volume method in conjunction with experimental investigation and a numerical method, respectively. An ellipse assumption for the cross-section of yarn was proposed in this analysis method with considering the yarn size and yarn-packing factor. Two types of local unit cell structures were identified for 4-step braided composites by considering the nature of the braiding processes and by observing the sample cross-sections. The relationship between the braiding procedure and the properties for 3-D braided structural shapes was established. This method provides the basis for analyzing stiffness and strength of 3-D braided composites.
文摘We propose a novel 3-dimensional hollow waveguide with a variable air core for widely tunable devices.We observed a wavelength shift of 1.8 nm in a hollow waveguide resonator with a displacement of 6μm in an air core.
