Abundant invariant solutions of extended(3+1)-dimensional KP-Boussinesq equation

Lie group analysis method is applied to the extended(3+1)-dimensional Kadomtsev–Petviashvili–Boussinesq equation and the corresponding similarity reduction equations are obtained with various infinitesimal generators.By selecting suitable arbitrary functions in the similarity reduction solutions,we obtain abundant invariant solutions,including the trigonometric solution,the kink-lump interaction solution,the interaction solution between lump wave and triangular periodic wave,the two-kink solution,the lump solution,the interaction between a lump and two-kink and the periodic lump solution in different planes.These exact solutions are also given graphically to show the detailed structures of this high dimensional integrable system.

Bi-level hybrid local search approach for three-dimensional loading problem with balancing constraints

This paper presents a bi-level hybrid local search(BHLS)algorithm for the three-dimensional loading problem with balancing constraints(3DLP-B),where several rectangular boxes with even densities but different sizes are loaded into a single cubic bin to meet the requirements of the space or capacity utilization and the balance of the center of gravity.The proposed algorithm hybridizes a novel framed-layout procedure in which the concept of the core block and its generation strategy are introduced.Once the block-loading sequence has been determined,we can load one block at a time by the designed construction heuristic.Then,the double-search is introduced;its external search procedure generates a list of compact packing patterns while its internal search procedure is used to search the core-block frames and their best distribution locations.The approach is extensively tested on weakly to strongly heterogeneous benchmark data.The results show that it has better performance in improving space utilization rate and balanced condition of the placement than existed techniques:the overall averages from 79.85%to 86.45%were obtained for the balanced cases and relatively high space-usage rate of 89.44%was achieved for the unbalanced ones.

Damage evolution of rock-encased-backfill structure under stepwise cyclic triaxial loading

Rock-encased-backfill(RB)structures are common in underground mining,for example in the cut-andfill and stoping methods.To understand the effects of cyclic excavation and blasting activities on the damage of these RB structures,a series of triaxial stepwise-increasing-amplitude cyclic loading experiments was conducted with cylindrical RB specimens(rock on outside,backfill on inside)with different volume fractions of rock(VF=0.48,0.61,0.73,and 0.84),confining pressures(0,6,9,and 12 MPa),and cyclic loading rates(200,300,400,and 500 N/s).The damage evolution and meso-crack formation during the cyclic tests were analyzed with results from stress-strain hysteresis loops,acoustic emission events,and post-failure X-ray 3D fracture morphology.The results showed significant differences between cyclic and monotonic loadings of RB specimens,particularly with regard to the generation of shear microcracks,the development of stress memory and strain hardening,and the contact forces and associated friction that develops along the rock-backfill interface.One important finding is that as a function of the number of cycles,the elastic strain increases linearly and the dissipated energy increases exponentially.Also,compared with monotonic loading,the cyclic strain hardening characteristics are more sensitive to rising confining pressures during the initial compaction stage.Another finding is that compared with monotonic loading,more shear microcracks are generated during every reloading stage,but these microcracks tend to be dispersed and lessen the likelihood of large shear fracture formation.The transition from elastic to plastic behavior varies depending on the parameters of each test(confinement,volume fraction,and cyclic rate),and an interesting finding was that the transformation to plastic behavior is significantly lower under the conditions of 0.73 rock volume fraction,400 N/s cyclic loading rate,and 9 MPa confinement.All the findings have important practical implications on the ability of backfill to support underground excavations.

In situ formation of multiple catalysts for enhancing the hydrogen storage of MgH_(2) by adding porous Ni_(3)ZnC_(0.7)/Ni loaded carbon nanotubes microspheres

MgH_(2) is considered one of the most promising hydrogen storage materials because of its safety,high efficiency,high hydrogen storage quantity and low cost characteristics.But some shortcomings are still existed:high operating temperature and poor hydrogen absorption dynamics,which limit its application.Porous Ni_(3)ZnC_(0.7)/Ni loaded carbon nanotubes microspheres(NZC/Ni@CNT)is prepared by facile filtration and calcination method.Then the different amount of NZC/Ni@CNT(2.5,5.0 and 7.5 wt%)is added to the MgH_(2) by ball milling.Among the three samples with different amount of NZC/Ni@CNT(2.5,5.0 and 7.5 wt%),the MgH_(2)-5 wt%NZC/Ni@CNT composite exhibits the best hydrogen storage performances.After testing,the MgH_(2)-5 wt%NZC/Ni@CNT begins to release hydrogen at around 110℃ and hydrogen absorption capacity reaches 2.34 wt%H_(2) at 80℃ within 60 min.Moreover,the composite can release about 5.36 wt%H_(2) at 300℃.In addition,hydrogen absorption and desorption activation energies of the MgH_(2)-5 wt%NZC/Ni@CNT composite are reduced to 37.28 and 84.22 KJ/mol H_(2),respectively.The in situ generated Mg_(2)NiH_(4)/Mg_(2)Ni can serve as a"hydrogen pump"that plays the main role in providing more activation sites and hydrogen diffusion channels which promotes H_(2) dissociation during hydrogen absorption process.In addition,the evenly dispersed Zn and MgZn2 in Mg and MgH_(2) could provide sites for Mg/MgH_(2) nucleation and hydrogen diffusion channel.This attempt clearly proved that the bimetallic carbide Ni_(3)ZnC_(0.7) is a effective additive for the hydrogen storage performances modification of MgH_(2),and the facile synthesis of the Ni_(3)ZnC_(0.7)/Ni@CNT can provide directions of better designing high performance carbide catalysts for improving MgH_(2).

A 3-DIMENSIONAL DATA MODEL FOR VISUALIZING CLOVERLEAF JUNCTION IN A CITY MODEL

The research work has been seldom done about cloverleaf junction expression in a 3-dimensional city model (3DCM). The main reason is that the cloverleaf junction is often in a complex and enormous construction. Its main body is bestraddle in air,and has aerial intersections between its parts. This complex feature made cloverleaf junction quite different from buildings and terrain, therefore, it is difficult to express this kind of spatial objects in the same way as for buildings and terrain. In this paper,authors analyze spatial characteristics of cloverleaf junction, propose an all-constraint points TIN algorithm to partition cloverleaf junction road surface, and develop a method to visualize cloverleaf junction road surface using TIN. In order to manage cloverleaf junction data efficiently, the authors also analyzed the mechanism of 3DCM data management, extended BLOB type in relational database, and combined R-tree index to manage 3D spatial data. Based on this extension, an appropriate data

All Single Traveling Wave Solutions to （3＋1）-Dimensional Nizhnok-Novikov-Veselov Equation

Using elementary integral method, a complete classification of all possible exact traveling wave solutions to （3＋1）-dimensional Nizhnok-Novikov-Veselov equation is given. Some solutions are new.

New Exact Solutions and Conservation Laws to （3＋1）-Dimensional Potential-YTSF Equation

Using the modified find some new exact solutions to Lie point symmetry groups and also get conservation laws, of the CK＇s direct method, we build the relationship between new solutions and old ones and the （3＋1）-dimensional potentiaial-YTSF equation. Baaed on the invariant group theory, Lie symmetries of the （3＋1）-dimensional potential-YTSF equation are obtained. We equation with the given Lie symmetry.

Evaluation of Airway Obstruction at Soft Palate Level in Male Patients with Obstructive Sleep Apnea/Hypopnea Syndrome:Dynamic 3-Dimensional CT Imaging of Upper Airway

This study examined the dynamic characteristics of upper airway collapse at soft palate level in patients with obstructive sleep apnea/hypopnea syndrome（OSAHS） by using dynamic 3-Dimensional（3-D） CT imaging.A total of 41 male patients who presented with 2 of the following symptoms,i.e.,daytime sleepiness and fatigue,frequent snoring,and apnea with witness,were diagnosed as having OSAHS.They underwent full-night polysomnography and then dynamic 3-D CT imaging of the upper airway during quiet breathing and in Muller＇s maneuver.The soft palate length（SPL）,the minimal cross-sectional area of the retropalatal region（mXSA-RP）,and the vertical distance from the hard palate to the upper posterior part of the hyoid（hhL） were compared between the two breathing states.These parameters,together with hard palate length（HPL）,were also compared between mild/moderate and severe OSAHS groups.Association of these parameters with the severity of OSAHS [as reflected by apnea hypopnea index（AHI） and the lowest saturation of blood oxygen（LSaO2）] was examined.The results showed that 31 patients had severe OSAHS,and 10 mild/moderate OSAHS.All the patients had airway obstruction at soft palate level.mXSA-RP was significantly decreased and SPL remarkably increased during Muller＇s maneuver as compared with the quiet breathing state.There were no significant differences in these airway parameters（except the position of the hyoid bone） between severe and mild/moderate OSAHS groups.And no significant correlation between these airway parameters and the severity of OSAHS was found.The position of hyoid was lower in the severe OSAHS group than in the mild/moderate OSAHS group.The patients in group with body mass index（BMI）≥26 had higher collapse ratio of mXSA-RP,greater neck circumference and smaller mXSA-RP in the Muller＇s maneuver than those in group with BMI26（P0.05 for all）.It was concluded that dynamic 3-D CT imaging could dynamically show the upper airway changes at soft palate level in OSAHS patients.All the OSAHS patients had airway obstruction of various degrees at soft palate level.But no correlation was observed between the airway change at soft palate level and the severity of OSAHS.The patients in group with BMI≥26 were more likely to develop airway obstruction at soft palate level than those with BMI26.

Grammian Determinant Solution and Pfaffianization for a (3+1)-Dimensional Soliton Equation

Based on the Pfaffian derivative formulae,a Grammian determinant solution for a(3+1)-dimensionalsoliton equation is obtained.Moreover,the Pfaffianization procedure is applied for the equation to generate a newcoupled system.At last,a Gram-type Pfaffian solution to the new coupled system is given.

NOVEL 6-SPS PARALLEL 3-DIMENSIONAL PLATFORM MANIPULATOR AND ITS FORCE/MOTION TRANSMISSION ANALYSIS

The unique design for a novel 6-SPS parallel 3-dimensional platformmanipulator with an orthogonal configuration is investigated. The layout feature of the parallelmanipulator is described. Its force/motion transmission capability, evaluation criteria arepresented. At the orthogonal configuration, the criteria and the relationships between the criteriaand the link lengths are analyzed, which is important since it can provide designer a piece ofvaluable information about how to choose the linear actuators. From the analysis of the results itis shown that the force/motion transmission capabilities of the parallel manipulator arecharacterized by isotropy at the orthogonal configuration. The manipulator is particularly suitablefor certain applications in 6-DOF micromanipulators and 6-axis force/moment transducers.

Spatiotemporal Similaritons in (3+l)-Dimensional Inhomogeneous Nonlinear Medium with Cubic-Quintic Nonlinearity

We obtain exact spatiotemporal similaritons to a （3＋ l）-dimensional inhomogeneous nonlinear Schrodinger equation, which describes the propagation of optical pulses in a cubic-quintic nonlinearity medium with distributed dispersion and gain. A one-to-one correspondence between such self-similar waves and solutions of the elliptic equation is found when a certain compatibility condition is satisfied. Based on exact solutions, we discuss evolutional behaviors of self-similar cnoidal waves and chirped similaritons in two kind of typicai soliton control systems. Moreover, the comparison between chirped similaritons and chirp-free solitons is given.

Some Special Types of Solitary Wave Solutions for （3＋1）-Dimensional Jimbo-MiwaEquation

Using the extended homogeneous balance method, we find some special types of single solitary wave solution and new types of the multisoliton solutions of the (3+1)-dimensional Jimbo-Miwa equation.

A Generalized Variable-Coefficient Algebraic Method Exactly Solving （3＋1）-Dimensional Kadomtsev-Petviashvilli Equation

A generalized variable-coefficient algebraic method is appfied to construct several new families of exact solutions of physical interest for （3＋1）-dimensional Kadomtsev-Petviashvilli （KP） equation. Among them, the Jacobi elliptic periodic solutions exactly degenerate to the soliton solutions at a certain limit condition. Compared with the existing tanh method, the extended tanh method, the Jacobi elliptic function method, and the algebraic method, the proposed method gives new and more general solutions.

Thermal effect on endurance performance of 3-dimensional RRAM crossbar array

Three-dimensional（3D） crossbar array architecture is one of the leading candidates for future ultra-high density nonvolatile memory applications. To realize the technological potential, understanding the reliability mechanisms of the3 D RRAM array has become a field of intense research. In this work, the endurance performance of the 3D 1D1 R crossbar array under the thermal effect is investigated in terms of numerical simulation. It is revealed that the endurance performance of the 3D 1D1 R array would be seriously deteriorated under thermal effects as the feature size scales down to a relatively small value. A possible method to alleviate the thermal effects is provided and verified by numerical simulation.

Applications of Extended Mapping Deformation Method in Two （3＋1）-Dimensional Nonlinear Models

Based on the extended mapping deformation method and symbolic computation, many exact travelling wave solutions are found for the (3+1)-dimensional JM equation and the (3+1)-dimensional KP equation. The obtained solutions include solitary solution, periodic wave solution, rational travelling wave solution, and Jacobian and Weierstrass function solution, etc.

Painleve Analysis and Determinant Solutions of a (3+1)-Dimensional Variable-Coefficient Kadomtsev-Petviashvili Equation in Wronskian and Grammian Form

In this paper, the investigation is focused on a （3＋1）-dimensional variable-coefficient Kadomtsev- Petviashvili （vcKP） equation, which can describe the realistic nonlinear phenomena in the fluid dynamics and plasma in three spatial dimensions. In order to study the integrability property of such an equation, the Painlevé analysis is performed on it. And then, based on the truncated Painlevé expansion, the bilinear form of the （3＋1）-dimensionaJ vcKP equation is obtained under certain coefficients constraint, and its solution in the Wronskian determinant form is constructed and verified by virtue of the Wronskian technique. Besides the Wronskian determinant solution, it is shown that the （3＋1）-dimensional vcKP equation also possesses a solution in the form of the Grammian determinant.

Rota-Baxter Operators on 3-dimensional Lie Algebras and Solutions of the Classical Yang-Baxter Equation

In this paper,we compute Rota-Baxter operators on the 3-dimensional Lie algebra g whose derived algebra’s dimension is 2.Furthermore,we give the corresponding solutions of the classical Yang-Baxter equation in the 6-dimensional Lie algebras g ■ _(ad~*) g~* and some new structures of left-symmetric algebra induced from g and its Rota-Baxter operators.

Extended symmetry transformation of (3+1)-dimensional generalized nonlinear Schrdinger equation with variable coefficients

In this paper, the extended symmetry transformation of （3＋1）-dimensional （3D） generalized nonlinear Schrodinger （NLS） equations with variable coefficients is investigated by using the extended symmetry approach and symbolic computation. Then based on the extended symmetry, some 3D variable coefficient NLS equations are reduced to other variable coefficient NLS equations or the constant coefficient 3D NLS equation. By using these symmetry transformations, abundant exact solutions of some 3D NLS equations with distributed dispersion, nonlinearity, and gain or loss are obtained from the constant coefficient 3D NLS equation.

A New Auto-Backlund Transformation and Two-Soliton Solution for (3+l)-Dimensional Jimbo-Miwa Equation

Abstract By improving the extended homogeneous balance method, a general method is suggested to derive a new auto-Bgcklund transformation （BT） for （3-k l）-Dimensional Jimbo-Miwa （JM） equation. The auto-BT obtained by using our method only involves one quadratic homogeneity equation written as a bilinear equation. Based on the auto-BT, two-soliton solution of the （3＋1）-Dimensional JM equation is obtained.

Multisymplectic Pseudospectral Discretizations for(3+1)-Dimensional Klein-Gordon Equation

We explore the multisymplectic Fourier pseudospectral discretizations for the (3+1)-dimensional Klein-Gordon equation in this paper.The corresponding multisymplectic conservation laws are derived.Two kinds of explicitsymplectic integrators in time are also presented.