3D printing techniques offer an effective method in fabricating complex radially multi-material structures.However,it is challenging for complex and delicate radially multi-material model geometries without supporting...3D printing techniques offer an effective method in fabricating complex radially multi-material structures.However,it is challenging for complex and delicate radially multi-material model geometries without supporting structures,such as tissue vessels and tubular graft,among others.In this work,we tackle these challenges by developing a polar digital light processing technique which uses a rod as the printing platform.The 3D model fabrication is accomplished through line projection.The rotation and translation of the rod are synchronized to project and illuminate the photosensitive material volume.By controlling the distance between the rod and the printing window,we achieved the printing of tubular structures with a minimum wall thickness as thin as 50 micrometers.By controlling the width of fine slits at the printing window,we achieved the printing of structures with a minimum feature size of 10 micrometers.Our process accomplished the fabrication of thin-walled tubular graft structure with a thickness of only 100 micrometers and lengths of several centimeters within a timeframe of just 100 s.Additionally,it enables the printing of axial multi-material structures,thereby achieving adjustable mechanical strength.This method is conducive to rapid customization of tubular grafts and the manufacturing of tubular components in fields such as dentistry,aerospace,and more.展开更多
The synthesis of new 4-imino-4H-chromeno[2,3-d]pyrimidin-3(5H)-amine in four steps including one step under microwave dielectric heating is reported. The structural identity of the synthesized compounds was establishe...The synthesis of new 4-imino-4H-chromeno[2,3-d]pyrimidin-3(5H)-amine in four steps including one step under microwave dielectric heating is reported. The structural identity of the synthesized compounds was established according to their spectroscopic analysis, such as FT-IR, NMR and mass spectroscopy. These new compounds were tested for their antiproliferative activities on seven representative human tumoral cell lines (Huh7 D12, Caco2, MDA-MB231, MDA-MB468, HCT116, PC3 and MCF7) and also on fibroblasts. Among them, only the compounds 6c showed micromolar cytotoxic activity on tumor cell lines (1.8 50 50 > 25 μM). Finally, in silico ADMET studies ware performed to investigate the possibility of using of the identified compound 6c as potential anti-tumor compound.展开更多
The dense and accurate measurement of 3D texture is helpful in evaluating the pavement function.To form dense mandatory constraints and improve matching accuracy,the traditional binocular reconstruction technology was...The dense and accurate measurement of 3D texture is helpful in evaluating the pavement function.To form dense mandatory constraints and improve matching accuracy,the traditional binocular reconstruction technology was improved threefold.First,a single moving laser line was introduced to carry out global scanning constraints on the target,which would well overcome the difficulty of installing and recognizing excessive laser lines.Second,four kinds of improved algorithms,namely,disparity replacement,superposition synthesis,subregion segmentation,and subregion segmentation centroid enhancement,were established based on different constraint mechanism.Last,the improved binocular reconstruction test device was developed to realize the dual functions of 3D texture measurement and precision self-evaluation.Results show that compared with traditional algorithms,the introduction of a single laser line scanning constraint is helpful in improving the measurement’s accuracy.Among various improved algorithms,the improvement effect of the subregion segmentation centroid enhancement method is the best.It has a good effect on both overall measurement and single pointmeasurement,which can be considered to be used in pavement function evaluation.展开更多
Objective:To build GPC3 gene short hairpin interference RNA(shRNA)slow virus veclor.observe expression of Huh-7 GPC3 gene in human liver cell line proliferation apoptosis and the effect of GPC3 gene influencing on liv...Objective:To build GPC3 gene short hairpin interference RNA(shRNA)slow virus veclor.observe expression of Huh-7 GPC3 gene in human liver cell line proliferation apoptosis and the effect of GPC3 gene influencing on liver cancer cell growth,and provide theoretical basis for genc therapy of liver cancer.Methods:Hepatocellular carcinoma cell line Huh-7 wsa transfected by a RNA interference technique.GPC3 gene expression in a variety of liver cancer cell lines was detected by fluorescence quantitative PCR.Targeted GPC3 gene seqnences of small interfering RNA(siRNA)PGC-shRNA-GPC3 were restructured.Stable expression cell linse of siRNA were screened and established with the heplp of liposomes(lipofectamine^(TM2000))as carrier transfcetion of human liver cell lines.In order to validate siRNA interference efficiency.GPC3 siRNA mRNA expression was detected after transfection by using RT-PCR and Western blot.The absorbance value of the cells of blank group,untransfection group and transfection group,the cell cycle and cell apoptosis were calculated,and effects of GPC3 gene nn Huh-7 cell proliferation and apoptosis were observed.Results:In the liver cancer cell lines Huh-7 GPC3 gene showed high expression.PGC-shRNA-GPC3 recombinant plasmid was constructde successfully via sequencing validation.Stable recombinant plasmid transfected into liver cancer cell linse Huh-7can obviously inhibit GPC3 mRNA expression level.Conclusions:The targeted GPC3 siRNA can effectively inhibit the expression of GPC3.展开更多
AIM: To investigate the potential roles of enhancer of zeste homolog2(EZH2), Bmi-1 and mi R-203 in cell proliferation and invasion in hepatocellular carcinoma(HCC) cell line Hep3 B.METHODS: A total of 73 patients who ...AIM: To investigate the potential roles of enhancer of zeste homolog2(EZH2), Bmi-1 and mi R-203 in cell proliferation and invasion in hepatocellular carcinoma(HCC) cell line Hep3 B.METHODS: A total of 73 patients who underwent surgical resection at Fuzong Clinical Medical College of Fujian Medical University were enrolled in this study. Hep3 B cells were cultivated in RPMI 1640 medium supplemented with 10% fetal bovine serum at 37?℃. Vectors that containing c DNA of the EZH2 gene or mi R-203 targeted sh RNA plasmid were constructed, and then transfected into Hep3 B cells. The m RNA expression of mi R-203, EZH2, and Bmi-1 was analyzed using quantitative real-time polymerase chain reaction analysis, and the protein levels of EZH2 and Bmi-1 were detected by Western blot analysis. Effect of EZH2 or mi R-203 on cell proliferation was observed by methyl thiazolyl tetrazolium assay, and cell apoptosis was assessed using flow cytometry. Besides, effect of EZH2 or mi R-203 on tumor cell invasion was detected using Transwell assay.RESULTS: The m RNA levels of EZH2 and Bmi-1 in HCC tissues and in Hep3 B cells were significantly higher compared with those in normal samples(P < 0.01), while mi R-203 level was significantly lower in HCC tissues(P < 0.01). Hep3 B cells transfected with EZH2-sh RNA or mi R-203-sh RNA showed lower expression levels of EZH2 and Bmi-1(P < 0.05). Compared with controls, Hep3 B cells transfected with EZH2-sh RNA had relative slow cell proliferation, indicating that low expression of EZH2 and Bmi-1 and overexpression of mi R-203 could inhibit Hep3 B cell proliferation(P < 0.05). The average apoptosis rate of Hep3 B cells transfected with EZH2-sh RNA vector was about 18.631%, while that of Hep3 B cells transfected with sh RNA vector was about 5.33%, suggesting that EZH2 was down-regulated by transfecting with EZH2-sh RNA, and the down-regulated EZH2 contributed to the cell apoptosis. Low expression of EZH2 and Bmi-1 and overexpression of mi R-203 could reduce Hep3 B cell invasion(P < 0.05).CONCLUSION: Our study suggests that EZH2 and Bmi-1 are up-regulated while mi R-203 is downregulated in Hep3 B cells. Mi R-203 may contribute to the metastasis and enhance apoptosis of HCC cells by regulating EZH2 and Bmi-1. Our study may provide a theoretical basis for metastasis of HCC and targeted therapy of HCC.展开更多
Wear and scuffing failures often occur in marine transmission gears due to high friction and flash temperature at the interface between the meshing-teeth.In this paper,a numerical solution procedure was developed for ...Wear and scuffing failures often occur in marine transmission gears due to high friction and flash temperature at the interface between the meshing-teeth.In this paper,a numerical solution procedure was developed for the predictions of transient friction and flash temperature in the marine timing gears during one meshing circle based on the 3D line contact mixed lubrication simulation,which had been verified by comparing the flash temperature with those from Blok’s theory.The effect of machined surface roughness on the mixed lubrication characteristics is studied.The obtained results for several typical gear pairs indicate that gear pair 4-6 exhibits the largest friction and the highest interfacial temperature increase due to severe rough surface asperity contacts,while the polished gear surfaces yield the smallest friction and the lowest interfacial temperature.In addition,the influences of the operating conditions and the gear design parameters on the friction-temperature behaviors are discussed.It is observed that the conditions of heavy load and low rotational velocity usually lead to significantly increased friction and temperature.In the meantime,by optimizing the gear design parameters,such as the modulus and the pressure angle,the performance of interfacial friction and temperature can be significantly improved.展开更多
基金supported financially by the Fundamental Research Funds for the Central Universities (YWF-22-K-101,YWF-23-L-805 and YWF-23-YG-QB-006)the support from the National Natural Science Foundation of China (12372106)Fundamental Research Funds for the Central Universities
文摘3D printing techniques offer an effective method in fabricating complex radially multi-material structures.However,it is challenging for complex and delicate radially multi-material model geometries without supporting structures,such as tissue vessels and tubular graft,among others.In this work,we tackle these challenges by developing a polar digital light processing technique which uses a rod as the printing platform.The 3D model fabrication is accomplished through line projection.The rotation and translation of the rod are synchronized to project and illuminate the photosensitive material volume.By controlling the distance between the rod and the printing window,we achieved the printing of tubular structures with a minimum wall thickness as thin as 50 micrometers.By controlling the width of fine slits at the printing window,we achieved the printing of structures with a minimum feature size of 10 micrometers.Our process accomplished the fabrication of thin-walled tubular graft structure with a thickness of only 100 micrometers and lengths of several centimeters within a timeframe of just 100 s.Additionally,it enables the printing of axial multi-material structures,thereby achieving adjustable mechanical strength.This method is conducive to rapid customization of tubular grafts and the manufacturing of tubular components in fields such as dentistry,aerospace,and more.
文摘The synthesis of new 4-imino-4H-chromeno[2,3-d]pyrimidin-3(5H)-amine in four steps including one step under microwave dielectric heating is reported. The structural identity of the synthesized compounds was established according to their spectroscopic analysis, such as FT-IR, NMR and mass spectroscopy. These new compounds were tested for their antiproliferative activities on seven representative human tumoral cell lines (Huh7 D12, Caco2, MDA-MB231, MDA-MB468, HCT116, PC3 and MCF7) and also on fibroblasts. Among them, only the compounds 6c showed micromolar cytotoxic activity on tumor cell lines (1.8 50 50 > 25 μM). Finally, in silico ADMET studies ware performed to investigate the possibility of using of the identified compound 6c as potential anti-tumor compound.
基金supported by National Natural Science Foundation of China (52178422)Doctoral Research Foundation of Hubei University of Arts and Science (2059047)National College Students’Innovation and Entrepreneurship Training Program (202210519021).
文摘The dense and accurate measurement of 3D texture is helpful in evaluating the pavement function.To form dense mandatory constraints and improve matching accuracy,the traditional binocular reconstruction technology was improved threefold.First,a single moving laser line was introduced to carry out global scanning constraints on the target,which would well overcome the difficulty of installing and recognizing excessive laser lines.Second,four kinds of improved algorithms,namely,disparity replacement,superposition synthesis,subregion segmentation,and subregion segmentation centroid enhancement,were established based on different constraint mechanism.Last,the improved binocular reconstruction test device was developed to realize the dual functions of 3D texture measurement and precision self-evaluation.Results show that compared with traditional algorithms,the introduction of a single laser line scanning constraint is helpful in improving the measurement’s accuracy.Among various improved algorithms,the improvement effect of the subregion segmentation centroid enhancement method is the best.It has a good effect on both overall measurement and single pointmeasurement,which can be considered to be used in pavement function evaluation.
基金supported by Wuhan Municipal Science and Technology Bureau of applied basic research project(No.2013062301010823)Wuhan City health planning medieal research project(No.WX14A11)
文摘Objective:To build GPC3 gene short hairpin interference RNA(shRNA)slow virus veclor.observe expression of Huh-7 GPC3 gene in human liver cell line proliferation apoptosis and the effect of GPC3 gene influencing on liver cancer cell growth,and provide theoretical basis for genc therapy of liver cancer.Methods:Hepatocellular carcinoma cell line Huh-7 wsa transfected by a RNA interference technique.GPC3 gene expression in a variety of liver cancer cell lines was detected by fluorescence quantitative PCR.Targeted GPC3 gene seqnences of small interfering RNA(siRNA)PGC-shRNA-GPC3 were restructured.Stable expression cell linse of siRNA were screened and established with the heplp of liposomes(lipofectamine^(TM2000))as carrier transfcetion of human liver cell lines.In order to validate siRNA interference efficiency.GPC3 siRNA mRNA expression was detected after transfection by using RT-PCR and Western blot.The absorbance value of the cells of blank group,untransfection group and transfection group,the cell cycle and cell apoptosis were calculated,and effects of GPC3 gene nn Huh-7 cell proliferation and apoptosis were observed.Results:In the liver cancer cell lines Huh-7 GPC3 gene showed high expression.PGC-shRNA-GPC3 recombinant plasmid was constructde successfully via sequencing validation.Stable recombinant plasmid transfected into liver cancer cell linse Huh-7can obviously inhibit GPC3 mRNA expression level.Conclusions:The targeted GPC3 siRNA can effectively inhibit the expression of GPC3.
文摘AIM: To investigate the potential roles of enhancer of zeste homolog2(EZH2), Bmi-1 and mi R-203 in cell proliferation and invasion in hepatocellular carcinoma(HCC) cell line Hep3 B.METHODS: A total of 73 patients who underwent surgical resection at Fuzong Clinical Medical College of Fujian Medical University were enrolled in this study. Hep3 B cells were cultivated in RPMI 1640 medium supplemented with 10% fetal bovine serum at 37?℃. Vectors that containing c DNA of the EZH2 gene or mi R-203 targeted sh RNA plasmid were constructed, and then transfected into Hep3 B cells. The m RNA expression of mi R-203, EZH2, and Bmi-1 was analyzed using quantitative real-time polymerase chain reaction analysis, and the protein levels of EZH2 and Bmi-1 were detected by Western blot analysis. Effect of EZH2 or mi R-203 on cell proliferation was observed by methyl thiazolyl tetrazolium assay, and cell apoptosis was assessed using flow cytometry. Besides, effect of EZH2 or mi R-203 on tumor cell invasion was detected using Transwell assay.RESULTS: The m RNA levels of EZH2 and Bmi-1 in HCC tissues and in Hep3 B cells were significantly higher compared with those in normal samples(P < 0.01), while mi R-203 level was significantly lower in HCC tissues(P < 0.01). Hep3 B cells transfected with EZH2-sh RNA or mi R-203-sh RNA showed lower expression levels of EZH2 and Bmi-1(P < 0.05). Compared with controls, Hep3 B cells transfected with EZH2-sh RNA had relative slow cell proliferation, indicating that low expression of EZH2 and Bmi-1 and overexpression of mi R-203 could inhibit Hep3 B cell proliferation(P < 0.05). The average apoptosis rate of Hep3 B cells transfected with EZH2-sh RNA vector was about 18.631%, while that of Hep3 B cells transfected with sh RNA vector was about 5.33%, suggesting that EZH2 was down-regulated by transfecting with EZH2-sh RNA, and the down-regulated EZH2 contributed to the cell apoptosis. Low expression of EZH2 and Bmi-1 and overexpression of mi R-203 could reduce Hep3 B cell invasion(P < 0.05).CONCLUSION: Our study suggests that EZH2 and Bmi-1 are up-regulated while mi R-203 is downregulated in Hep3 B cells. Mi R-203 may contribute to the metastasis and enhance apoptosis of HCC cells by regulating EZH2 and Bmi-1. Our study may provide a theoretical basis for metastasis of HCC and targeted therapy of HCC.
基金Project(51905118)supported by the National Natural Science Foundation of ChinaProject(3072020CF0306)supported by the Fundamental Research Funds for the Central Universities,China。
文摘Wear and scuffing failures often occur in marine transmission gears due to high friction and flash temperature at the interface between the meshing-teeth.In this paper,a numerical solution procedure was developed for the predictions of transient friction and flash temperature in the marine timing gears during one meshing circle based on the 3D line contact mixed lubrication simulation,which had been verified by comparing the flash temperature with those from Blok’s theory.The effect of machined surface roughness on the mixed lubrication characteristics is studied.The obtained results for several typical gear pairs indicate that gear pair 4-6 exhibits the largest friction and the highest interfacial temperature increase due to severe rough surface asperity contacts,while the polished gear surfaces yield the smallest friction and the lowest interfacial temperature.In addition,the influences of the operating conditions and the gear design parameters on the friction-temperature behaviors are discussed.It is observed that the conditions of heavy load and low rotational velocity usually lead to significantly increased friction and temperature.In the meantime,by optimizing the gear design parameters,such as the modulus and the pressure angle,the performance of interfacial friction and temperature can be significantly improved.
