Breeding and Seed Reproduction Techniques of a New Tetraploid Common Buckwheat Variety‘Pintianqiao 3’

[Objectives]This study was conducted to actively carry out the breeding of new tetraploid common buckwheat varieties and its supporting breeding techniques.[Methods]Pintianqiao 3 is a new tetraploid common buckwheat variety developed by College of Agriculture of Shanxi Agricultural University and Agricultural Genetic Resources Center of Shanxi Agricultural University,using‘Pintianqiao 1’as the parent,through mutation treatment with 0.2%colchicine aqueous solution,grain selection,plant selection,isolation and identification,variety comparison,regional test and field investigation.The variety has chromosomes 2n=4X=32,and shows a spring sowing period of 101 d and a summer sowing period of 80 d,large flowers and seeds(with a 1000-grain weight of 41.4 g),and good resistance to lodging.[Results]From 2021 to 2022,Pintianqiao 3 participated in the independent joint regional test of common buckwheat varieties in Shanxi Province,and the average yield in 10 test positions was 1.8 kg,equivalent to 1800 kg/hm^(2),which was 8.4%higher than the control.It passed the field investigation conducted by Shanxi provincial expert group for identification of non-major crop varieties in Dongyang and Kelan experimental sites on September 2-3,2022.On January 4,2024,it passed the preliminary examination of Shanxi Provincial Crop Variety Approval Committee.The seed reproduction technique of Pintianqiao 3 including land selection,preparation before sowing,sowing,field management and timely harvesting has been developed.[Conclusions]This study provides technical support for the demonstration and popularization of this new variety.

The Application and Operation-Effect Analysis for Complex Tibial Plateau Fractures with 3D Printing Technique

Objective: To investigate the value of 3D printing techniques in the treatment of complex tibial plateau fractures. Methods: From September 2016 to September 2018, 28 patients with complex tibial plateau fractures were treated in our hospital. According to the odevity of hospitalized order, the patients were divided into two groups. Group A used 3D reconstruction, virtually reduction, 3D printing and demonstration of individual fracture model before operation while group B only received conventional process by use X-rays or CT image. Comparison between the two groups was made in operation time, operative blood loss, radiation frequency, surgery instrument cost and knee function score. Results: The follow-up was 14.4 months on average (ranged 6 to 22 months). There was no statistical difference of the surgery instrument cost between the 2 groups (P > 0.05). The operation time of group A was significantly shorter than that of group B (P χ2 = 0.373, P = 0.54). Conclusion: 3D printing techniques can improve surgery effect in complex tibial plateau fractures.

Assessment of the effects of induced anisometropia on binocularity with glasses-free 3D technique

AIM:To assess the effect of experimentally induced anisometropia on binocularity in normal adults with glassesfree three-dimensional(3D)technique.METHODS:Totally 54 healthy medical students with normal binocularity in the cross-sectional study were enrolled.Anisometropia was induced by placing trail lenses over the right eye,in 0.5 D steps including lenses of-0.5,-1,-1.5,-2,-2.5 D(hyperopic anisometropia)and lenses of+0.5,+1,+1.5,+2,+2.5 D(myopic anisometropia).The glasses-free 3D technique was used to evaluated not only fine stereopsis,but also coarse stereopsis,dynamic stereopsis,foveal suppression,and peripheral suppression in these subjects.One-way analysis of variance was used to compare quantitative data such as fine stereopsis,coarse stereopsis.Pearson’s Chi-square test was performed to compare categorical data such as dynamic stereopsis,foveal suppression and peripheral suppression.RESULTS:The subjects showed a statistically significant decline in fine stereopsis,coarse stereopsis,and dynamic stereopsis with increasing levels of anisometropia(P<0.001).Binocularity was af fected when induced anisometropia was more than 1 D(P<0.05).Foveal suppression and peripheral suppression were evident and increased in proportion to anisometropia(P<0.001).CONCLUSION:The relatively low degrees of anisometropia may have a potentially significant effect on high-grade binocular interaction.The mechanisms underlying the defect of binocularity seem to involve not only foveal suppression,but also peripheral suppression.

Kinetics and the difference for extraction of praseodymium and neodymium from nitrate aqueous solution by [A336][NO_3] using the single drop technique

The kinetics and the difference for Pr(Ⅲ)and Nd(Ⅲ)extraction from nitrate aqueous solution using trialkylmethylammonium nitrate([A336][NO3])as extractant were investigated by the single drop technique.The dependence of the extraction rate of Pr(Ⅲ)and Nd(Ⅲ)on the concentrations of free Pr(Ⅲ)and Nd(Ⅲ)ions,the concentrations of Na NO3 and H+in aqueous solutions,and the concentrations of[A336][NO3]in kerosene solutions were discussed and the corresponding extraction rate equations for Pr(Ⅲ)and Nd(Ⅲ)were obtained.These equations demonstrated that the reaction rate constant of Pr(Ⅲ)with[A336][NO3]was double than that of Nd(Ⅲ).The effect of the addition of diethylenetriaminepentaacetic acid(DTPA)on the difference in the extraction rate of Pr(Ⅲ)and Nd(Ⅲ)by[A336][NO3]was also investigated.It was revealed that the difference in the complex formation rates of Pr(Ⅲ)and Nd(Ⅲ)with DTPA made a significant impact on the difference in the extraction rates of Pr(Ⅲ)and Nd(Ⅲ)with[A336][NO3].The ratio of extraction rates of Pr(Ⅲ)to Nd(Ⅲ)with[A336][NO3]was in proportion to the ratio of complex formation rates of Pr(Ⅲ)to Nd(Ⅲ)with DTPA.The extraction rate difference for Pr(Ⅲ)and Nd(Ⅲ)with[A336][NO3]increased due to a higher complex formation rate constant of DTPA with the free and un-complexed Nd(Ⅲ)ions in the aqueous nitrate solution than that with Pr(Ⅲ)ions.Therefore,the addition of DTPA in the aqueous nitrate solution is an effective method to intensify the separation of Pr(Ⅲ)and Nd(Ⅲ)in kinetics.The study on the extraction mechanism indicated that both the extraction of Pr(Ⅲ)and Nd(Ⅲ)by[A336][NO3]were diffusion controlled,and the reactions obeyed SN2 mechanism.The present work highlights a possible approach to strengthen the kinetic separation of Pr(Ⅲ)and Nd(Ⅲ).

Permittivity of composites used for Luneburg lens antennas by drilling holes based on 3-D printing technique

Due to the attractive performances such as the ability of beam focus,broadband,multi-beam scanning and other features,Luneburg lens antennas are applied in multi-beam antenna,which overcomes the problem of gain loss produced by multi-beam parabolic antenna.Based on 3-D printing technique,Luneburg lens antennas by drilling holes are studied.Permittivity and loss tangent of the equivalent lens materials can be influenced by original materials,hole shapes,hole directions,and porosity.After tests,polystyrene with waxes may be the most appropriate materials for Luneburg lens with high strength.Permittivity with the shape of triangle is the lowest due to the homogeneity.Relative permittivities with the direction at a range of 15°-45°are lower while loss tangent at a range of 0°-30°.Radial directional holes are more appropriate for Luneburg lens.The relative permittivity is decreased with the increment of porosity.After calculations,the forecasts calculated by Looyenga and A-BG theory are more precise.Finally,Luneburg lens with two layers is fabricated by 3-D printing.

FABRICATION OF HIGHLY HYDROPHOBIC FILMS OF POLY(3-HEXADECYL PYRROLE) NANOPARTICLES BY LANGMUIR-BLODGETT TECHNIQUE

Thin films of poly（3-hexadecyl pyrrole） （P3HDP） nanoparticles have been fabricated by using Langmuir-Blodgett film deposition technique. The structures and morphology of the films were studied by using infrared spectroscopy, scanning and transmission microscopes. The experimental results demonstrated that the nanoparticles were formed by self-assembling P3HDP at air-water surface. The water contact angles of these films with different deposition layers were measured to be as high as 110°.

Variety Characteristics and Cultivation Techniques of Rape Changzayou 3

High-quality hybrid rape Changzayou 3 is a new yellow-seed double-low rape variety with high yield, good resistance to diseases and lodging and high oil content, suitable for winter cropping in central China. Its high-yield cultivation tech- niques are mainly early seeding at proper time, thinning timely, rational close planting, scientific fertilization, control of diseases and pest and weeding.

Study on the 3D Seismic Data Field Hybrid Rendering Technique of Natural Gas Hydrate and Its Application

3D visualization technology is a tool used for displaying, describing, and understanding the characteristics of geologic bodies, and features high efficiency, objective accuracy, visual expression, etc. In this paper, the man-machine interactive interpretation and 3D visualization technology rapidly displaying and analyzing the 3D seismic data of hydrate ore volume is researched and developed using the hybrid rendering technique. Through the integrated interpretation on the 3D space structure, stratum, and seismic attributes, the visualized multi-attribute superimposition analysis is implemented for describing the spatial distribution characteristics of hydrate ore volume and exquisitely describing the subtle geological characteristics of hydrate ore volume. By the hybrid rendering technique, authentication and interpretation are provided for the geological exploration work, so as to greatly enhance the visualization and accuracy of the geological analysis, and also provide a good decision-making foundation for the subsequent development of resources.

THE STUDY OF THE NON-STEADY KINETICS OF THE OXYDEHYDROGENATION OF ETHANE TO ETHYLENE OVER THE CATALYST OF Mo-V-Nb/Al_2O_3 BY THE TECHNIQUE OF TEMPERATURE PROGRAMMED TRANSIENT RESPONSE AND ELECTRIC CONDUCTIVITY

In this paper, instead of with the more expensive Fourier Transform Infrared Spectrometer(FTIR) a new technique of Temperature Programmed Transient Response(TP-TR) has been used with gas chromatography. Therefore, the TP-TR will be applied more widespreadly than ever before. With the technique of TP-TR and electric conductivity, the study is on the reaction mechanism and the adsorption behavior of the reactants and products to the present catalyst Mo-V-Nb/Al_2O_3 in the reaction from ethane through oxydehydrogenation to ethylene as the product. By Range-Kutta-Gill and Margarat methods, the kinetic parameters of the reaction elementary steps (i.e. rate constants, active energies and frequency factors) have been evaluated. The mathematical treatment coincides with the experimental results.

Calculation of the contribution of single-zone production by ultraviolet spectrum technique:A case study in well QHD32-6-3 field

Based on the established mathematic model and graphic interpretation, a new method, which is used to calculate the contribution of single-zone production in a commingled producing well by the ultraviolet spectrum technique, has been established. The standard plate was drawn using the extinction coefficient E of sample oils formulated artificially as y-axis and the wavelength as x-axis. The curve resulting from the UV analysis of sample oils in the commingled well was inserted into the standard plate and compared. The proportion of each single zone in the commingled producing well was identical with the proportion of the curve which is closest to the curve of sample oils formulated artificially. In the well QHD32-6-3 field, taking well A22 for example and using this method, the production contribution of a single zone was calculated. The result showed that the Nm4 zone is a major "contributor", the proportion of the Nm4 zone is 70%, and that of the Nm1 zone is 30%. The ultraviolet spectrum technique provided a new reservoir geochemical technique of monitoring production contribution, especially for biodegraded heavy oil, but it has some limitation, just depending on the GC fingerprint technique.

Application of computer aided 3D simulation technique for complicated foot and ankle fractures

Objective To investigate the effect of computer aided 3D simulation technique for treating complicated foot and ankle fractures precisely.Methods From November 2007 to August 2009,255 patients with complicated foot and ankle fractures

32×32 Si盖革模式激光焦平面探测器

为了满足350 nm~1100 nm波长范围内远距离及微弱激光3维成像探测的需求,提出了一种规模为32×32的盖革模式硅激光焦平面阵列探测器,它主要由硅雪崩光电二极管阵列、读出电路芯片、微透镜阵列、半导体制冷器、引脚网格阵列壳体等元件组成。硅雪崩光电二极管焦平面阵列采用拉通型N^(+)-Π_(1)-P^(-)-Π_(2)-P^(+)结构,工作在盖革模式下,通过Si片背面抛磨减薄及盲孔刻蚀技术,实现了纤薄光敏区的加工;读出电路采用主动模式淬灭设计,使电路单元的死时间控制在50 ns以内,并利用一种带相移技术的时间数字转换电路优化方案,在满足时间分辨率不大于2 ns的同时,降低了读出电路芯片的功耗。结果表明,在反向过偏电压14 V、工作温度-40℃的条件下,该探测器在850 nm的目标波长可实现20.7%的平均光子探测效率与0.59 kHz的平均暗计数率,时间分辨率为1 ns,有效像元率优于97%。该研究为纤薄型背进光Si基激光焦平面探测器的研制提供了参考。

粮草双高型大麦新品种皖饲麦3号的选育及栽培技术

皖饲麦3号是安徽省农业科学院作物研究所采用系谱法选育而成的粮草双高型饲用大麦新品种。2018—2020年度参加安徽省多点联合鉴定,平均产量达480.64 kg/667 m^(2),比对照西引二号增产10.42%。2023年通过农业农村部非主要农作物品种登记,登记号:GPD大麦(青稞)(2023)340003。皖饲麦3号为春性多棱皮大麦,茎秆粗壮,分蘖力较好,生育期187 d左右,株高90 cm左右,千粒质量31 g左右,籽粒蛋白质含量(质量分数,下同)10.31%,淀粉含量632.6 g/kg,β-葡聚糖含量5.01%,综合农艺性状较好,抗倒性强。为充分发挥该品种在安徽省沿淮、江淮地区饲料大麦生产中的作用,系统介绍了其选育过程、特征特性,并提出了以收获青饲草、青贮饲料和籽粒为不同目的的配套高产栽培技术。

Numerical simulation of protection range in exploiting the upper protective layer with a bow pseudo-incline technique

The developing processes of stress and deformation fields of a protected layer after mining an upper-protective layer with a bow pseudo-incline technique were simulated to locate the protection region. The pressure relief of the protected layer was analyzed after mining the upper-protective layer. The pressure relief angle along the strike and incline were located according to the roles of protection of the deformation and stress pressure-relief of the protective layer after mining. This results show that the upper-protective layer with the bow pseudo-incline technique have an upper and downside pressure relief angle of 85 and 68 degrees respectively; the distribution of strike pressure relief angles along the pseudo-incline working face is uneven and their values range from 38.3 to 51 degrees. The pressure relief angle of the inclined middle location was the largest. The distribution of the protection region of the upper-protective layer with the bow pseudo-incline teelmique located by practical tests and numerical simulation is essentially consistent, compared with the results obtained by these methods.

3D打印技术用于经鼻蝶窦入路垂体腺瘤切除术应用效果及对血清MMP-9和IGF-1水平的影响

目的:探究3D打印技术在经鼻蝶窦入路垂体腺瘤(PA)切除术的应用效果及对血清基质金属蛋白酶-9(MMP-9)和胰岛素样生长因子-1(IGF-1)水平的影响。方法:选取2020年5月至2022年5月秦皇岛市第一医院收治的84例PA患者,按照随机数表法将其分为观察组和对照组,每组42例。对照组行经鼻蝶窦入路垂体腺瘤切除术,观察组行经鼻蝶窦入路垂体腺瘤切除术联合应用3D打印技术,比较两组肿瘤切除效果、围术期指标、视力改善情况、MMP-9和IGF-1水平,以及鼻腔功能的鼻气道阻力(NAR)、T&T嗅觉测试评分及并发症。结果:观察组肿瘤切除效果优于对照组,差异有统计学意义(U=2.286,P<0.05);观察组手术时间、术中出血量及住院时间均少于对照组,差异有统计学意义(t=4.780、11.438、11.842,P<0.05);术后3 d、7 d时观察组血清MMP-9和IGF-1水平低于对照组,差异有统计学意义(F=7.526、4.985,P<0.05);术后1个月、3个月时观察组NAR及T&T嗅觉测试评分低于对照组,差异有统计学意义(F=6.359、8.436,P<0.05);两组视力视野改善情况及并发症发生率比较,差异无统计学意义(P>0.05)。结论:3D打印技术用于经鼻蝶窦入路垂体腺瘤切除术可提高肿瘤切除效果,优化手术操作,减少创伤,有利于减轻疼痛,改善嗅觉功能与视力视野,并能降低血清MMP-9、IGF-1水平,且安全性较高。

Seismic Data Acquisition Techniques on Loess Hills in the Ordos Basin

High-resolution exploration for lithologic targets confronted with difficulties due to the original brought out from geophysical and geologic characteristics of the loess hills and the very thick deserts in Ordos. Scientific research since mid 1990s has conducted three acquisition techniques including the high-resolution crooked line survey in valleys, high-resolution multiple straight line survey and 3D survey, under different surface conditions and for different geological targets.

Method for differential phase delay resolution of phase referencing VLBI technique and its experimental verification

The phase referencing Very Long Baseline Interferometry(VLBI)technique is a newly developed tool to measure the angular position of a deep space exploration probe in the plane-of-the-sky.Through alternating observations between the probe and a nearby reference radio source,their accurate relative angular separation can be obtained from the radio images generated by this technique.To meet the requirements of the current orbit determination software,differential delay should be firstly derived from those radio images.A method to resolve the differential phase delay from the phase referencing VLBI technique is proposed in this paper,and as well the mathematical model for differential phase ambiguity resolution is established.This method is verified with practical measurement data from the Chang’E-3 mission.The differential phase delay between the Chang’E-3 lander and rover was derived from the phase referencing VLBI measurements,and was then imported into the Shanghai astronomical observatory Orbit Determination Program(SODP)to calculate the position of the rover relative to the lander on the lunar surface.The results are consistent with those acquired directly from radio images,indicating that the differential phase ambiguity has been correctly resolved.The proposed method can be used to promote applications of the phase referencing VLBI technique in future lunar or deep space explorations,and more accurate orbit determination becomes promising.

MoS_(2)/Si tunnel diodes based on comprehensive transfer technique

Due to the pristine interface of the 2D/3D face-tunneling heterostructure with an ultra-sharp doping profile, the 2D/3D tunneling field-effect transistor(TFET) is considered as one of the most promising low-power devices that can simultaneously obtain low off-state current(IOFF), high on-state current(ION) and steep subthreshold swing(SS). As a key element for the 2D/3D TFET, the intensive exploration of the tunnel diode based on the 2D/3D heterostructure is in urgent need.The transfer technique composed of the exfoliation and the release process is currently the most common approach to fabricating the 2D/3D heterostructures. However, the well-established transfer technique of the 2D materials is still unavailable.Only a small part of the irregular films can usually be obtained by mechanical exfoliation, while the choice of the chemical exfoliation may lead to the contamination of the 2D material films by the ions in the chemical etchants. Moreover, the deformation of the 2D material in the transfer process due to its soft nature also leads to the nonuniformity of the transferred film,which is one of the main reasons for the presence of the wrinkles and the stacks in the transferred film. Thus, the large-scale fabrication of the high-quality 2D/3D tunnel diodes is limited. In this article, a comprehensive transfer technique that can mend up the shortages mentioned above with the aid of the water and the thermal release tape(TRT) is proposed. Based on the method we proposed, the MoS_(2)/Si tunnel diode is experimentally demonstrated and the transferred monolayer MoS_(2) film with the relatively high crystal quality is confirmed by atomic force microscopy(AFM), scanning electron microscopy(SEM), and Raman characterizations. Besides, the prominent negative differential resistance(NDR) effect is observed at room temperature, which verifies the relatively high quality of the MoS_(2)/Si heterojunction. The bilayer MoS_(2)/Si tunnel diode is also experimentally fabricated by repeating the transfer process we proposed, followed by the specific analysis of the electrical characteristics. This study shows the advantages of the transfer technique we proposed and indicates the great application foreground of the fabricated 2D/3D heterostructure for ultralow-power tunneling devices.

La_(2)O_(3)掺杂铁基记忆合金涂层组织与性能研究

为了探究La_(2)O_(3)对激光熔覆形状记忆合金涂层组织和性能的影响,采用宽带激光熔覆技术在42CrMo中碳钢表面制备了掺杂La_(2)O_(3)的Fe17Mn5Si10Cr5Ni形状记忆合金复合涂层,通过表征得到了La_(2)O_(3)对复合涂层的显微组织、维氏硬度、耐磨性、耐蚀性和表面残余应力的影响结果。结果表明,La_(2)O_(3)显著降低了晶粒尺寸,掺杂质量分数w=0.009时,晶粒尺寸达到最小值3.03μm,而复合涂层具有最大硬度454.7 HV 0.2,磨损量最低;并得到最低的自腐蚀电流为4.287×10^(-7)A/cm^(2),最高的自腐蚀电位为-0.843 V,涂层保护率达到94.83%,La_(2)O_(3)明显提高了涂层的耐腐蚀性能;此时涂层的残余应力由拉应力转变为压应力,并在Fe-Mn-Si/La_(2)O_(3)产生的最大残余压应力值为-378 MPa。此项研究为低应力高性能激光熔覆涂层的开发和推广提供了实践参考。