Finite Element Simulation of Flexible Roll Forming with Supplemented Material Data and the Experimental Verification

Flexible roll forming is a promising manufacturing method for the production of variable cross section products. Considering the large plastic strain in this forming process which is much larger than that of uniform deformation phase of uniaxial tensile test, the widely adopted method of simulating the forming processes with non-supplemented material data from uniaxial tensile test will certainly lead to large error. To reduce this error, the material data is supplemented based on three constitutive models. Then a finite element model of a six passes flexible roll forming process is established based on the supplemented material data and the original material data from the uniaxial tensile test. The flexible roll forming experiment of a B pillar reinforcing plate is carried out to verify the proposed method. Final cross section shapes of the experimental and the simulated results are compared. It is shown that the simulation calculated with supplemented material data based on Swift model agrees well with the experimental results, while the simulation based on original material data could not predict the actual deformation accurately. The results indicate that this material supplement method is reliable and indispensible, and the simulation model can well reflect the real metal forming process. Detailed analysis of the distribution and history of plastic strain at different positions are performed. A new material data supplement method is proposed to tackle the problem which is ignored in other roll forming simulations, and thus the forming process simulation accuracy can be greatly improved.

Evolution of 3D tectonic stress field and fault movement in North China

Based on data of fault movement surveying, we simulate the evolution process of three dimensional stress field in North China by three dimensional finite element method. Evolutional patterns in one-year time scale from 1986 to 1997 have been illustrated and the evolution characteristics of stress field have been analyzed. In comparison with the seismic activity among that time interval in North China, we have primarily discussed the relationship between the evolution of stress field and seismic activity.

3D finite element prediction of chip flow, burr formation, and cutting forces in micro end-milling of aluminum 6061-T6

Abstract Predictive models for machining operations have been significantly improved through numerous methods in recent decades. This study proposed a 3D finite element modeling （3D FEM） approach for the micro end-milling orAl6061-T6. Finite element （FE） simulations were performed under different cutting conditions to obtain realistic numerical predictions of chip flow, burr formation, and cutting forces. FE modeling displayed notable advantages, such as capability to easily handle any type of tool geometry and any side effect on chip formation, including thermal aspect and material property changes. The proposed 3D FE model considers the effects ofmiU helix angle and cutting edge radius on the chip. The prediction capability of the FE model was validated by comparing numerical model and experimental test results. Burr dimension trends were correlated with force profile shapes. However, the FE predictions overestimated the real force magnitude. This overestimation indicates that the model requires further development.