Survey of lightweighting methods of huge 3D models for online Web3D visualization

Background With the rapid development of Web3D technologies, the online Web3D visualization, particularly for complex models or scenes, has been in a great demand. Owing to the major conflict between the Web3D system load and resource consumption in the processing of these huge models, the huge 3D model lightweighting methods for online Web3D visualization are reviewed in this paper. Methods By observing the geometry redundancy introduced by man-made operations in the modeling procedure, several categories of light-weighting related work that aim at reducing the amount of data and resource consumption are elaborated for Web3D visualization. Results By comparing perspectives, the characteristics of each method are summarized, and among the reviewed methods, the geometric redundancy removal that achieves the lightweight goal by detecting and removing the repeated components is an appropriate method for current online Web3D visualization. Meanwhile, the learning algorithm, still in improvement period at present, is our expected future research topic. Conclusions Various aspects should be considered in an efficient lightweight method for online Web3D visualization, such as characteristics of original data, combination or extension of existing methods, scheduling strategy, cache man-agement, and rendering mechanism. Meanwhile, innovation methods, particularly the learning algorithm, are worth exploring.

Influence of formation heterogeneity on foam flooding performance using 2D and 3D models:an experimental study

The formation heterogeneity is considered as one of the major factors limiting the application of foam flooding.In this paper,influences of formation properties,such as permeability,permeability distribution,interlayer,sedimentary rhythm and 3D heterogeneity,on the mobility control capability and oil displacement efficiency of foam flooding,were systematically investigated using 2D homogeneous and 2D/3D heterogeneous models under 120°C and salinity of 20×10~4 mg/L.The flow resistance of foam was promoted as the permeability increased,which thus resulted in a considerable oil recovery behavior.In the scenario of the vertical heterogeneous formations,it was observed that the permeability of the high-permeable layer was crucial to foam mobility control,and the positive rhythm appeared favorable to improve the foam flooding performance.The additional oil recovery increased to about 40%.The interlayer was favorable for the increases in mobility reduction factor and oil recovery of foam flooding when the low permeability ratio was involved.For the 3D heterogeneous formations,foam could efficiently adjust the areal and vertical heterogeneity through mobility control and gravity segregation,and thus enhancing the oil recovery to 11%–14%.The results derived from this work may provide some insight for the field test designs of foam flooding.

Fragile Watermarking of 3D Models Using Genetic Algorithms

This paper describes a novel algorithm for fragile watermarking of 3D models. Fragile watermarking requires detection of even minute intentional changes to the 3D model along with the location of the change. This poses a challenge since inserting random amount of watermark in all the vertices of the model would generally introduce perceptible distortion. The proposed algorithm overcomes this challenge by using genetic algorithm to modify every vertex location in the model so that there is no perceptible distortion. Various experimental results are used to justify the choice of the genetic algorithm design parameters. Experimental results also indicate that the proposed algorithm can accurately detect location of any mesh modification.

Auspicious Patterns and 3D Models Applied in the Creation of Personalized Products

Auspicious patterns are an important manifestation of traditional crafts aesthetics for Chinese culture, and it not only exhibits the clever tricks of folk art, showing more personality and characteristics of Chinese culture in the humanities and arts aesthetic concerns. It shows the traditional aesthetics, based on the harmonious and success, constructed by intelligence and humbleness, shaped by symmetry and balance. This thesis contains two topics: they are the 2D image materialization and the 3D model flattening. First is analyzing the image of the auspicious pattern, and transformed the 2D image into a solid model. The second is through the mathematical operation skills of the geometric model, the existing auspicious 3D model of the triangular mesh is scaled, appropriately rotated and divided to form a flattening model of different visual effects. Finally, these models by means of other modeling software were combined into a new 3D model, then through the 3D printer to quickly print out part of the unique personalized products, to promote the natural beauty of traditional Chinese culture.

Non-rigid 3D models retrieval based on hierarchical matching

In 3D models retrieval, feature description and retrieval of non-rigid model face more complex problems due to the isometry transformation of itself. We introduce the hierarchical combination matching into the feature comparison, and build a map between the divided regions of two models, and then achieve accurate feature matching based on patch-by-patch, which successfully introduces the spatial information into feature matching. Verified by experiment, the 3D model retrieval method proposed in this paper based on hierarchical combination matching can make sure more accurate feature matching, so as to enhance the precision of retrieval.

A clipping algorithm for real-scene 3D models

The development of unmanned aerial vehicle(UAV)oblique photogrammetric technology provides a good foundation for the rapid construction of large-scale and high-definition real-scene 3D models.However,due to the limitations of the modeling process,irrelevant feature data cannot be eliminated in the modeling stage.The built models contain irrelevant features and model distortions caused by errors.At present,most existing clipping algorithms cannot effectively clip real-scene 3D models that are organized as a whole or with levels of detail(LODs).Therefore,this paper proposes a novel algorithm for clipping real-scene 3D models from any perspective based on clipping boundary lines thatfit the surfaces of the models.The results of the clipping experiments for 3D models constructed with oblique UAV images show that this algorithm can effectively clip any part of the 3D models,that the clipping results of each level model closelyfit the corresponding clipping boundary lines,and that the accuracy of the clipping results is very high.Additionally,the time complexity of the algorithm is O(n^(2)).In conclusion,the algorithm proposed in this paper provides correct and effective clipping results for real-scene 3D models with LODs that are constructed with photogrammetric or 3D laser scanning data.

Building 3D CityGML models of mining industrial structures using integrated UAV and TLS point clouds

Mining industrial areas with anthropogenic engineering structures are one of the most distinctive features of the real world.3D models of the real world have been increasingly popular with numerous applications,such as digital twins and smart factory management.In this study,3D models of mining engineering structures were built based on the CityGML standard.For collecting spatial data,the two most popular geospatial technologies,namely UAV-SfM and TLS were employed.The accuracy of the UAV survey was at the centimeter level,and it satisfied the absolute positional accuracy requirement of creat-ing all levels of detail(LoD)according to the CityGML standard.Therefore,the UAV-SfM point cloud dataset was used to build LoD 2 models.In addition,the comparison between the UAV-SfM and TLS sub-clouds of facades and roofs indicates that the UAV-SfM and TLS point clouds of these objects are highly consistent,therefore,point clouds with a higher level of detail and accuracy provided by the integration of UAV-SfM and TLS were used to build LoD 3 models.The resulting 3D CityGML models include 39 buildings at LoD 2,and two mine shafts with hoistrooms,headframes,and sheave wheels at LoD3.

3D Road Network Modeling and Road Structure Recognition in Internet of Vehicles

Internet of Vehicles (IoV) is a new system that enables individual vehicles to connect with nearby vehicles,people, transportation infrastructure, and networks, thereby realizing amore intelligent and efficient transportationsystem. The movement of vehicles and the three-dimensional (3D) nature of the road network cause the topologicalstructure of IoV to have the high space and time complexity.Network modeling and structure recognition for 3Droads can benefit the description of topological changes for IoV. This paper proposes a 3Dgeneral roadmodel basedon discrete points of roads obtained from GIS. First, the constraints imposed by 3D roads on moving vehicles areanalyzed. Then the effects of road curvature radius (Ra), longitudinal slope (Slo), and length (Len) on speed andacceleration are studied. Finally, a general 3D road network model based on road section features is established.This paper also presents intersection and road section recognition methods based on the structural features ofthe 3D road network model and the road features. Real GIS data from a specific region of Beijing is adopted tocreate the simulation scenario, and the simulation results validate the general 3D road network model and therecognitionmethod. Therefore, thiswork makes contributions to the field of intelligent transportation by providinga comprehensive approach tomodeling the 3Droad network and its topological changes in achieving efficient trafficflowand improved road safety.

Advancing Wound Filling Extraction on 3D Faces:An Auto-Segmentation and Wound Face Regeneration Approach

Facial wound segmentation plays a crucial role in preoperative planning and optimizing patient outcomes in various medical applications.In this paper,we propose an efficient approach for automating 3D facial wound segmentation using a two-stream graph convolutional network.Our method leverages the Cir3D-FaIR dataset and addresses the challenge of data imbalance through extensive experimentation with different loss functions.To achieve accurate segmentation,we conducted thorough experiments and selected a high-performing model from the trainedmodels.The selectedmodel demonstrates exceptional segmentation performance for complex 3D facial wounds.Furthermore,based on the segmentation model,we propose an improved approach for extracting 3D facial wound fillers and compare it to the results of the previous study.Our method achieved a remarkable accuracy of 0.9999993% on the test suite,surpassing the performance of the previous method.From this result,we use 3D printing technology to illustrate the shape of the wound filling.The outcomes of this study have significant implications for physicians involved in preoperative planning and intervention design.By automating facial wound segmentation and improving the accuracy ofwound-filling extraction,our approach can assist in carefully assessing and optimizing interventions,leading to enhanced patient outcomes.Additionally,it contributes to advancing facial reconstruction techniques by utilizing machine learning and 3D bioprinting for printing skin tissue implants.Our source code is available at https://github.com/SIMOGroup/WoundFilling3D.

Review of Artificial Intelligence for Oil and Gas Exploration: Convolutional Neural Network Approaches and the U-Net 3D Model

Deep learning, especially through convolutional neural networks (CNN) such as the U-Net 3D model, has revolutionized fault identification from seismic data, representing a significant leap over traditional methods. Our review traces the evolution of CNN, emphasizing the adaptation and capabilities of the U-Net 3D model in automating seismic fault delineation with unprecedented accuracy. We find: 1) The transition from basic neural networks to sophisticated CNN has enabled remarkable advancements in image recognition, which are directly applicable to analyzing seismic data. The U-Net 3D model, with its innovative architecture, exemplifies this progress by providing a method for detailed and accurate fault detection with reduced manual interpretation bias. 2) The U-Net 3D model has demonstrated its superiority over traditional fault identification methods in several key areas: it has enhanced interpretation accuracy, increased operational efficiency, and reduced the subjectivity of manual methods. 3) Despite these achievements, challenges such as the need for effective data preprocessing, acquisition of high-quality annotated datasets, and achieving model generalization across different geological conditions remain. Future research should therefore focus on developing more complex network architectures and innovative training strategies to refine fault identification performance further. Our findings confirm the transformative potential of deep learning, particularly CNN like the U-Net 3D model, in geosciences, advocating for its broader integration to revolutionize geological exploration and seismic analysis.

A Semantic-Sensitive Approach to Indoor and Outdoor 3D Data Organization

Building model data organization is often programmed to solve a specific problem,resulting in the inability to organize indoor and outdoor 3D scenes in an integrated manner.In this paper,existing building spatial data models are studied,and the characteristics of building information modeling standards(IFC),city geographic modeling language(CityGML),indoor modeling language(IndoorGML),and other models are compared and analyzed.CityGML and IndoorGML models face challenges in satisfying diverse application scenarios and requirements due to limitations in their expression capabilities.It is proposed to combine the semantic information of the model objects to effectively partition and organize the indoor and outdoor spatial 3D model data and to construct the indoor and outdoor data organization mechanism of“chunk-layer-subobject-entrances-area-detail object.”This method is verified by proposing a 3D data organization method for indoor and outdoor space and constructing a 3D visualization system based on it.

Visualization of Landscape Changes in a 3D Environment Using the Storytelling Approach—The Example of the City of Pristina

This study proposes a detailed concept of how landscape changes can be transferred and communicated in a 3D environment using the storytelling approach. In 2018, Mocnik and Fairbairn argued that maps are good for representing a geographic space but texts have a better benefit than maps for telling a story [1]. A framework is presented on how a landscape change can be retrieved out of textual descriptions. A prototype of a 3D model with a projection on top of it was developed. The case study tells the story of the landscape change in the city of Pristina. The key element of the visualization is a timeline. Several media like cadastral maps, orthophotos, texts, graphics, and background sound are used and combined in an animated light show and the visualization was evaluated within a user study.

Framework system and research flow of uncertainty in 3D geological structure models

Uncertainty in 3D geological structure models has become a bottleneck that restricts the development and application of 3D geological modeling.In order to solve this problem during periods of accuracy assessment,error detection and dynamic correction in 3D geological structure models,we have reviewed the current situation and development trends in 3D geological modeling.The main context of uncertainty in 3D geological structure models is discussed.Major research issues and a general framework system of uncertainty in 3D geological structure models are proposed.We have described in detail the integration of development practices of 3D geological modeling systems,as well as the implementation process for uncertainty evaluation in 3D geological structure models.This study has laid the basis to build theoretical and methodological systems for accuracy assessment and error correction in 3D geological models and can assist in improving 3D modeling techniques under complex geological conditions.

3D random Voronoi grain-based models for simulation of brittle rock damage and fabric-guided micro-fracturing

A grain-based distinct element model featuring three-dimensional （3D） Voronoi tessellations （randompoly-crystals） is proposed for simulation of crack damage development in brittle rocks. The grainboundaries in poly-crystal structure produced by Voronoi tessellations can represent flaws in intact rockand allow for numerical replication of crack damage progression through initiation and propagation ofmicro-fractures along grain boundaries. The Voronoi modelling scheme has been used widely in the pastfor brittle fracture simulation of rock materials. However the difficulty of generating 3D Voronoi modelshas limited its application to two-dimensional （2D） codes. The proposed approach is implemented inNeper, an open-source engine for generation of 3D Voronoi grains, to generate block geometry files thatcan be read directly into 3DEC. A series of Unconfined Compressive Strength （UCS） tests are simulated in3DEC to verify the proposed methodology for 3D simulation of brittle fractures and to investigate therelationship between each micro-parameter and the model＇s macro-response. The possibility of numericalreplication of the classical U-shape strength curve for anisotropic rocks is also investigated innumerical UCS tests by using complex-shaped （elongated） grains that are cemented to one another alongtheir adjoining sides. A micro-parameter calibration procedure is established for 3D Voronoi models foraccurate replication of the mechanical behaviour of isotropic and anisotropic （containing a fabric） rocks. 2014 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting byElsevier B.V. All rights reserved.

Geo-registered 3D models from crowdsourced image collections

In this article we present our system for scalable,robust,and fast city-scale reconstruction from Internet photo collections(IPC)obtaining geo-registered dense 3D models.The major achievements of our system are the efficient use of coarse appearance descriptors combined with strong geometric constraints to reduce the computational complexity of the image overlap search.This unique combination of recognition and geometric constraints allows our method to reduce from quadratic complexity in the number of images to almost linear complexity in the IPC size.Accordingly,our 3D-modeling framework is inherently better scalable than other state of the art methods and in fact is currently the only method to support modeling from millions of images.In addition,we propose a novel mechanism to overcome the inherent scale ambiguity of the reconstructed models by exploiting geo-tags of the Internet photo collection images and readily available StreetView panoramas for fully automatic geo-registration of the 3D model.Moreover,our system also exploits image appearance clustering to tackle the challenge of computing dense 3D models from an image collection that has significant variation in illumination between images along with a wide variety of sensors and their associated different radiometric camera parameters.Our algorithm exploits the redundancy of the data to suppress estimation noise through a novel depth map fusion.The fusion simultaneously exploits surface and free space constraints during the fusion of a large number of depth maps.Cost volume compression during the fusion achieves lower memory requirements for high-resolution models.We demonstrate our system on a variety of scenes from an Internet photo collection of Berlin containing almost three million images from which we compute dense models in less than the span of a day on a single computer.

Effect of the mineral spatial distribution heterogeneity on the tensile strength of granite:Insights from PFC3D-GBM numerical analysis

The mechanical characteristics of crystalline rocks are affected by the heterogeneity of the spatial distribution of minerals.In this paper,a novel three-dimensional(3D)grain-based model(GBM)based on particle flow code(PFC),i.e.PFC3D-GBM,is proposed.This model can accomplish the grouping of mineral grains at the 3D scale and then filling them.Then,the effect of the position distribution,geometric size,and volume composite of mineral grains on the cracking behaviour and macroscopic properties of granite are examined by conducting Brazilian splitting tests.The numerical results show that when an external load is applied to a sample,force chains will form around each contact,and the orientation distribution of the force chains is uniform,which is independent of the external load level.Furthermore,the number of high-strength force chains is proportional to the external load level,and the main orientation distribution is consistent with the external loading direction.The main orientation of the cracks is vertical to that of the high-strength force chains.The geometric size of the mineral grains controls the mechanical behaviours.As the average grain size increases,the number of transgranular contacts with higher bonding strength in the region connecting both loading points increases.The number of high-strength force chains increases,leading to an increase in the stress concentration value required for the macroscopic failure of the sample.Due to the highest bonding strength,the generation of transgranular cracks in quartz requires a higher concentrated stress value.With increasing volume composition of quartz,the number of transgranular cracks in quartz distributed in the region connecting both loading points increases,which requires many high-strength force chains.The load level rises,leading to an increase in the tensile strength of the numerical sample.

Preoperative 3D reconstruction and fluorescent indocyanine green for laparoscopic duodenum preserving pancreatic head resection:A case report

BACKGROUND Duodenum-preserving pancreatic head resection(DPPHR)is the choice of surgery for benign or low-grade malignant tumors of the pancreatic head.Laparoscopic DPPHR(LDPPHR)procedure can be improved by preoperative 3D model reconstruction and the use of intravenous indocyanine green fluorescent before surgery for real-time navigation with fluorescent display to guide the surgical dissection and prevention of from injury to vessels and biliary tract.CASE SUMMARY Here we report the successful short-and long-term outcomes after one year following LDPPHR for a 60-year lady who had an uneventful recovery and was discharged home one week after the surgery.CONCLUSION There was no bile leakage or pancreatic leakage or delayed gastric emptying.The histopathology report showed multiple cysts in the pancreatic head and localized pancreatic intraepithelial tumor lesions.The resected margin was free of tumor.

Size effects in the uniaxial compressive properties of 3D printed models of rocks:an experimental investigation

Transparent physical models of real rocks fabricated using three-dimensional(3D)printing technology are used in photoelas-tic experiments to quantify the evolution of the internal stress and deformation fields of rocks.Therefore,they are rendered as an emerging powerful technique to quantitatively reveal the intrinsic mechanisms of rock failure.The mechanical behav-ior of natural rocks exhibits a significant size effect;however,limited research has been conducted on whether transparent physical models observe similar size effects.In this study,to make the transparent printed models accurately demonstrate the mechanical behavior of natural rocks and reveal the internal mechanism of the size effect in rock mechanical behavior,the size effect in 3D printed models of fractured and porous rocks under uniaxial compressive loading was investigated.Transparent cylindrical models with different sizes that contained different fractured and porous structures were printed using the fracture and porous characteristics extracted from natural coal and sandstone.The variation in uniaxial compres-sive strength and elastic modulus of fractured and porous models for increasing model sizes were obtained through uniaxial compression experiments.Finally,the influence of internal discontinuous structural features,such as fractures and pores,on the size effect pertaining to the mechanical behavior of the model was analyzed and elaborated by comparing it with the mechanical properties of the continuous homogeneous model without fractures and pores.The findings provided support and reference to analyze the size effect of rock mechanical behavior and the effect of the internal discontinuous structure using 3D printed transparent models.

Effects of 3D deformation and nonlinear stress–strain relationship on the Brazilian test for a transversely isotropic rock

To improve the accuracy of indirect tensile strength for a transversely isotropic rock in the Brazilian test, this study considered the three-dimensional (3D) deformation and the nonlinear stress–strain relationship. A parametric study of a numerical Brazilian test was performed for a general range of elastic constants, revealing that the 3D modeling evaluated the indirect tensile strength up to 40% higher than the plane stress modeling. For the actual Asan gneiss, the 3D model evaluated the indirect tensile strength up to 10% higher and slightly enhanced the accuracy of deformation estimation compared with the plane stress model. The nonlinearity in stress–strain curve of Asan gneiss under uniaxial compression was then considered, such that the evaluated indirect tensile strength was affected by up to 10% and its anisotropy agreed well with the physical intuition. The estimation of deformation was significantly enhanced. The further validation on the nonlinear model is expected as future research.

Modeling Methods of 3D Model in Digital Twins

To understand the current application and development of 3D modeling in Digital Twins(DTs),abundant literatures on DTs and 3D modeling are investigated by means of literature review.The transition process from 3D modeling to DTs modeling is analyzed,as well as the current application of DTs modeling in various industries.The application of 3D DTs modeling in the􀀀elds of smartmanufacturing,smart ecology,smart transportation,and smart buildings in smart cities is analyzed in detail,and the current limitations are summarized.It is found that the 3D modeling technology in DTs has broad prospects for development and has a huge impact on all walks of life and even human lifestyles.At the same time,the development of DTs modeling relies on the development and support capabilities of mature technologies such as Big Data,Internet of Things,Cloud Computing,Articial Intelligence,and game technology.Therefore,although some results have been achieved,there are still limitations.This work aims to provide a good theoretical support for the further development of 3D DTs modeling.