Prospects of 3D Printing Technology in Dental Medicine

With the continuous advancement of technology,the application of 3D printing technology in the field of dental medicine is becoming increasingly widespread.This article aims to explore the current applications and future potential of 3D printing technology in dental medicine and to analyze its benefits and challenges.It first introduces the current state of 3D printing technology in dental implants,crowns,bridges,orthodontics,and maxillofacial surgery.It then discusses the potential applications of 3D printing technology in oral tissue engineering,drug delivery systems,personalized dental prosthetics,and surgical planning.Finally,it analyzes the benefits of 3D printing technology in dental medicine,such as improving treatment accuracy and patient comfort,and shortening treatment times,while also highlighting the challenges faced,such as costs,material choices,and technical limitations.This article aims to provide a reference for professionals in the field of dental medicine and to promote the further application and development of 3D printing technology in this area.

Simulation on deposition and solidification processes of 7075 Al alloy droplets in 3D printing technology

In order to study the successive deposition and solidification processes of uniform alloy droplets during the drop-on-demand three dimensional（3D） printing method,based on the volume of fluid（VOF） method,a 3D numerical model was employed.In this model,the 7075 alloy with larger temperature range for phase change was used.The simulation results show that the successive deposition and solidification processes of uniform 7075 alloy droplets can be well characterized by this model.Simulated droplets shapes agree well with SEM images under the same condition.The effects of deposition and solidification of droplets result in vertical and L-shaped ridges on the surface of droplets,and tips of dendrites appear near the overlap of droplets due to rapid solidification.

Experimental investigation on the invert stability of operating railway tunnels with different drainage systems using 3D printing technology

In recent years, the invert anomalies of operating railway tunnels in water-rich areas occur frequently,which greatly affect the transportation capacity of the railway lines. Tunnel drainage system is a crucial factor to ensure the invert stability by regulating the external water pressure(EWP). By means of a threedimensional(3D) printing model, this paper experimentally investigates the deformation behavior of the invert for the tunnels with the traditional drainage system(TDS) widely used in China and its optimized drainage system(ODS) with bottom drainage function. Six test groups with a total of 110 test conditions were designed to consider the design factors and environmental factors in engineering practice,including layout of the drainage system, blockage of the drainage system and groundwater level fluctuation. It was found that there are significant differences in the water discharge, EWP and invert stability for the tunnels with the two drainage systems. Even with a dense arrangement of the external blind tubes, TDS was still difficult to eliminate the excessive EWP below the invert, which is the main cause for the invert instability. Blockage of drainage system further increased the invert uplift and aggravated the track irregularity, especially when the blockage degree is more than 50%. However, ODS can prevent these invert anomalies by reasonably controlling the EWP at tunnel bottom. Even when the groundwater level reached 60 m and the blind tubes were fully blocked, the invert stability can still be maintained and the railway track experienced a settlement of only 1.8 mm. Meanwhile, the on-site monitoring under several rainstorms further showed that the average EWP of the invert was controlled within 84 k Pa, while the maximum settlement of the track slab was only 0.92 mm, which also was in good agreement with the results of model test.

Advancing Wound Filling Extraction on 3D Faces:An Auto-Segmentation and Wound Face Regeneration Approach

Facial wound segmentation plays a crucial role in preoperative planning and optimizing patient outcomes in various medical applications.In this paper,we propose an efficient approach for automating 3D facial wound segmentation using a two-stream graph convolutional network.Our method leverages the Cir3D-FaIR dataset and addresses the challenge of data imbalance through extensive experimentation with different loss functions.To achieve accurate segmentation,we conducted thorough experiments and selected a high-performing model from the trainedmodels.The selectedmodel demonstrates exceptional segmentation performance for complex 3D facial wounds.Furthermore,based on the segmentation model,we propose an improved approach for extracting 3D facial wound fillers and compare it to the results of the previous study.Our method achieved a remarkable accuracy of 0.9999993% on the test suite,surpassing the performance of the previous method.From this result,we use 3D printing technology to illustrate the shape of the wound filling.The outcomes of this study have significant implications for physicians involved in preoperative planning and intervention design.By automating facial wound segmentation and improving the accuracy ofwound-filling extraction,our approach can assist in carefully assessing and optimizing interventions,leading to enhanced patient outcomes.Additionally,it contributes to advancing facial reconstruction techniques by utilizing machine learning and 3D bioprinting for printing skin tissue implants.Our source code is available at https://github.com/SIMOGroup/WoundFilling3D.

3D Printing Technology for Buildings＇ Accessibility： The Tactile Map for MTE Museum in Pavia

3D printing technology is an innovative manufacturing technology used in several disciplines, whose number and diversity are growing day by day. The development of devices to improve the accessibility of buildings and urban spaces for people with disabilities through 3D priming technology is still not broadly explored. The present study is focused on filling this gap, with the realization of a tactile map of the MTE （Museum of Electrical Technology） of the University of Pavia （Italy） for blind and visually impaired people. The tactile map represents the building plan with all the information to guide the visit. The device is the result of a research process which is made by several steps and experimental tests, aimed at setting the best 3D priming profiles to meet all the requirements of the end-users. This paper describes methods and strategies applied to reach these goals： it underlines the social and technical approaches, the experimental phases and its possible future developments.

Interventional Therapy for Cerebral Aneurysms Under the Guidance of 3D Printing Technology

Objective:To explore the clinical method and effect of 3D printing in the treatment of cerebral aneurysms.Methods:The authors research work on the hospital,work time in February 2019-February 2020,this study selected patients of cerebral aneurysms,this period are selected for treatment of 100 cases of patients,randomly divided into two groups,a group to give simple intervention,named as the control group,another group for the interventional therapy under the guidance of 3 D printing,named as experimental group,analyze the effect of two groups of patients with clinical intervention.Results:The length of hospital stay in the experimental group was shorter than that in the control group.Meanwhile,the incidence of complications and adverse reactions in the experimental group and the control group were 6.00%and 18.00%,the experimental group was better(P<0.05).Conclusion:3D printing technology can be applied in the treatment of patients with cerebral aneurysms to provide guidance for interventional surgical treatment.It has significant effect,can reduce the incidence complications in patients,has significant clinical effect,and can be popularized.

Mechanical Experiment for 3D Printing of Titanium Bone Bionic Dental Implants

[Objectives] To explore the flexural strength of 3D printed titanium bone bionic dental implants and provide a scientific basis for the clinical application of 3D printed porous bionic bone dental implants. [Methods] The cone-beam CT( CBCT) image information of 20 premolars extracted by orthodontic requirement was collected,and a new porous bone bionic dental implant was produced using modeling software and 3D printer. The premolars were divided into two groups( A and B). The universal testing machine was used to test the flexural strength of the two groups and the difference in flexural strength between the two groups was compared through statistics. [Results]Twenty 3D printed porous titanium bone bionic implants were accurately produced; the morphology of group A and group B were extremely similar to each other; the average flexural strength of group A was 2 767. 92 N,while the average flexural strength of group B was 778. 77 N,showing that the average flexural strength of group A was significantly higher than that of group B,and the difference was statistically significant( P < 0. 05).[Conclusions]The personalized porous structure root implants produced by 3D printing technology are very similar to the target tooth morphology,and show high accuracy and small error of production. Besides,the flexural strength of 3D printed personalized porous structure root implants can fully meet the requirements of the maximum occlusal force for dental implant restoration. It is expected to provide a scientific basis for clinical application of 3 D printed porous bionic bone tooth implants.

Biomechanical analysis of an absorbable material for treating fractures of the inferior orbital wall

AIM:To investigate the biomechanical properties and practical application of absorbable materials in orbital fracture repair.METHODS:The three-dimensional(3D)model of orbital blowout fractures was reconstructed using Mimics21.0 software.The repair guide plate model for inferior orbital wall fracture was designed using 3-matic13.0 and Geomagic wrap 21.0 software.The finite element model of orbital blowout fracture and absorbable repair plate was established using 3-matic13.0 and ANSYS Workbench 21.0 software.The mechanical response of absorbable plates,with thicknesses of 0.6 and 1.2 mm,was modeled after their placement in the orbit.Two patients with inferior orbital wall fractures volunteered to receive single-layer and double-layer absorbable plates combined with 3D printing technology to facilitate surgical treatment of orbital wall fractures.RESULTS:The finite element models of orbital blowout fracture and absorbable plate were successfully established.Finite element analysis(FEA)showed that when the Young’s modulus of the absorbable plate decreases to 3.15 MPa,the repair material with a thickness of 0.6 mm was influenced by the gravitational forces of the orbital contents,resulting in a maximum total deformation of approximately 3.3 mm.Conversely,when the absorbable plate was 1.2 mm thick,the overall maximum total deformation was around 0.4 mm.The half-year follow-up results of the clinical cases confirmed that the absorbable plate with a thickness of 1.2 mm had smaller maximum total deformation and better clinical efficacy.CONCLUSION:The biomechanical analysis observations in this study are largely consistent with the clinical situation.The use of double-layer absorbable plates in conjunction with 3D printing technology is recommended to support surgical treatment of infraorbital wall blowout fractures.

Three-dimensional printing: review of application in medicine and hepatic surgery

Three-dimensional(3D) printing(3DP) is a rapid prototyping technology that has gained increasing recognition in many different fields. Inherent accuracy and low-cost property enable applicability of 3DP in many areas, such as manufacturing, aerospace,medical, and industrial design. Recently, 3DP has gained considerable attention in the medical field. The image data can be quickly turned into physical objects by using 3DP technology. These objects are being used across a variety of surgical specialties. The shortage of cadaver specimens is a major problem in medical education. However, this concern has been solved with the emergence of 3DP model. Custom-made items can be produced by using 3DP technology. This innovation allows 3DP use in preoperative planning and surgical training. Learning is difficult among medical students because of the complex anatomical structures of the liver. Thus, 3D visualization is a useful tool in anatomy teaching and hepatic surgical training. However,conventional models do not capture haptic qualities. 3DP can produce highly accurate and complex physical models. Many types of human or animal differentiated cells can be printed successfully with the development of 3D bio-printing technology. This progress represents a valuable breakthrough that exhibits many potential uses, such as research on drug metabolism or liver disease mechanism. This technology can also be used to solve shortage of organs for transplant in the future.

3D printing method for bone tissue engineering scaffold

3D printing technology is an emerging technology.It constructs solid bodies by stacking materials layer by layer,and can quickly and accurately prepare bone tissue engineering scaffolds with specific shapes and structures to meet the needs of different patients.The field of life sciences has received a great deal of attention.However,different 3D printing technologies and materials have their advantages and disadvantages,and there are limitations in clinical application.In this paper,the technology,materials and clinical applications of 3D printed bone tissue engineering scaffolds are reviewed,and the future development trends and challenges in this field are prospected.

Strain Sensor Based on Embedded Fiber Bragg Grating in Thermoplastic Polyurethane Using the 3D Printing Technology for Improved Sensitivity

A new and easy-to-fabricate strain sensor has been developed,based on fiber Bragg grating(FBG)technology embedded into a thermoplastic polyurethane filament using a 3-dimensional(3D)printer.Taking advantage of the flexibility and elastic properties of the thermoplastic polyurethane material,the embedding of the FBG provides durable protection with enhanced flexibility and sensitivity,as compared to the use of a bare FBG.Results of an evaluation of its performance have shown that the FBG sensors embedded in this way can be applied effectively in the measurement of strain,with an average wavelength responsivity of 0.0135 nm/cm of displacement for tensile strain and -0.0142 nm/cm for compressive strain,both showing a linearity value of up to 99%.Furthermore,such an embedded FBG-based strain sensor has a sensitivity of~1.74 times greater than that of a bare FBG used for strain measurement and is well protected and suitable for in-the-field use.It is also observed that the thermoplastic polyurethane based(TPU-based)FBG strain sensor carries a sensitivity value of~2.05 times higher than that of the polylactic acid based(PLA-based)FBG strain sensor proving that TPU material can be made as the material of choice as a“sensing”pad for the FBG.

Biomedical applications of the powder-based 3D printed titanium alloys:A review

3D printing technology is a new type of precision forming technology and the core technology of the third industrial revolution.The powder-based 3D printing technology of titanium and its alloys have received great attention in biomedical applications since its advantages of custom manufacturing,costsaving,time-saving,and resource-saving potential.In particular,the personalized customization of 3D printing can meet specific needs and achieve precise control of micro-organization and structural design.The purpose of this review is to present the most advanced multi-material 3D printing methods for titanium-based biomaterials.We first reviewed the bone tissue engineering,the application of titanium alloy as bone substitutes and the development of manufacturing technology,which emphasized the advantages of 3D printing technology over traditional manufacturing methods.What is more,the optimization design of the hierarchical structure was analyzed to achieve the best mechanical properties,and the biocompatibility and osseointegration ability of the porous titanium alloy after implantation in living bodies was analyzed.Finally,we emphasized the development of digital tools such as artificial intelligence,which provides new ideas for the rational selection of processing parameters.The 3D printing titanium-based alloys will meet the huge market demand in the biomedical field,but there are still many challenges,such as the trade-off between high strength and low modulus,optimization of process parameters and structural design.We believe that the combination of mechanical models,machine learning,and metallurgical knowledge may shape the future of metal printing.

Design and fabrication of r-hirudin loaded dissolving microneedle patch for minimally invasive and long-term treatment of thromboembolic disease

Cardiovascular disease is the leading cause of global mortality,with anticoagulant therapy being the main prevention and treatment strategy.Recombinant hirudin(r-hirudin)is a direct thrombin inhibitor that can potentially prevent thrombosis via subcutaneous(SC)and intravenous(IV)administration,but there is a risk of haemorrhage via SC and IV.Thus,microneedle(MN)provides painless and sanitary alternatives to syringes and oral administration.However,the current technological process for the micro mould is complicated and expensive.The micro mould obtained via three-dimensional(3D)printing is expected to save time and cost,as well as provide a diverse range of MNs.Therefore,we explored a method for MNs array model production based on 3D printing and translate it to micro mould that can be used for fabrication of dissolving MNs patch.The results show that r-hirudin-loaded and hyaluronic acid(HA)-based MNs can achieve transdermal drug delivery and exhibit significant potential in the prevention of thromboembolic disease without bleeding in animal models.These results indicate that based on 3D printing technology,MNs combined with r-hirudin are expected to achieve diverse customizableMNs and thus realize personalized transdermal anticoagulant delivery for minimally invasive and long-term treatment of thrombotic disease.

Research progress of localization technique assisted neuroendoscopy for cerebral hemorrhage

Neurosurgeons who perform intracere-bral hemorrhage(ICH)evacuation procedures have lim-ited options for monitoring hematoma evacuation and intraoperatively assessing residual-hematoma burden.In recent years,neuroendoscope-assisted,minimally inva-sive surgery for spontaneous ICH is simple and effective and becoming increasingly common.Many methods are applied in neuronavigation-assisted surgery for ICH evac-uation,such as neuroendoscopy,three-dimensional(3D)reconstruction,intraoperative ultrasound,and stereotac-tic craniotomy.Compared with a traditional craniotomy operation,hematoma removal(using methods of accurate localization)can reduce iatrogenic damage,protect white matter,and shorten patients’recovery time.This paper mainly outlines the treatment of basal ganglia-cerebral hemorrhage with neuroendoscopy assistance using local-ization techniques.

Exploring innovative techniques for damage control during natural disasters

The study critically examines the principles,mechanisms,and effectiveness of different damage control tech-niques in dealing with natural disasters,emphasizing their pivotal role in minimizing casualties and economic losses.Each of these damage control techniques is mapped based on their applications and relevance in the key areas of natural disaster management.By utilizing various real-world instances,the present study shows that the effective implementation of various innovative techniques is shaping the space of natural disaster management in a global context.The integration of different innovative techniques into the existing natural disaster management system has improved the survival rate,economic performance,and sustainable development.The study finds that innovative disaster financing models,clear strategies,and creating awareness among communities can improve the overall efficiency of innovative techniques that are currently used for damage control during natural disaster events.Despite the substantial advantages of these creative strategies,the study acknowledges challenges such as financial constraints,unclear policy goals,and community adaptation requirements.The study also indicates that in the future,automatic damage restoration,quick prototyping,and additive engineering will play a vital role in controlling damage from catastrophic events,while it acknowledges limitations in temporal scope,generaliz-ability,andfinancial constraints.

Energy Absorption Characteristics of a Novel Asymmetric and Rotatable Re-entrant Honeycomb Structure

Based on the symmetric re-entrant honeycomb(S-RH)structure with negative Poisson’s ratios,a novel asymmetric and rotatable re-entrant honeycomb(AR-RH)structure was proposed.Both the S-RH structure and AR-RH structure were produced by the 3D printing technology.Through experimental test and finite element simulation,the deformation mechanism and energy absorption characteristics of the AR-RH structure and the S-RH structure with negative Poisson’s ratios at different impact velocities were compared.The experimental test and finite element simulation results show that the novel AR-RH structure with negative Poisson’s ratios has stronger energy absorption capacity than the S-RH structure,and it has been verified that the rotatability of AR-RH can indeed absorb energy.Furthermore,the degree of asymmetry of the AR-RH structure was discussed.