Achieving structurally stable O3-type layered oxide cathodes through site-specific cation-anion co-substitution for sodium-ion batteries

O3-type layered oxides have garnered great attention as cathode materials for sodium-ion batteries because of their abundant reserves and high theoretical capacity.However,challenges persist in the form of uncontrollable phase transitions and intricate Na^(+)diffusion pathways during cycling,resulting in compromised structural stability and reduced capacity over cycles.This study introduces a special approach employing site-specific Ca/F co-substitution within the layered structure of O_(3)-NaNi_(0.5)Mn_(0.5)O_(2) to effectively address these issues.Herein,the strategically site-specific doping of Ca into Na sites and F into O sites not only expands the Na^(+)diffusion pathways but also orchestrates a mild phase transition by suppressing the Na^(+)/vacancy ordering and providing strong metal-oxygen bonding strength,respectively.The as-synthesized Na_(0.95)Ca_(0.05)Ni_(0.5)Mn_(0.5)O_(1.95)F_(0.05)(NNMO-CaF)exhibits a mild O3→O3+O'3→P3 phase transition with minimized interlayer distance variation,leading to enhanced structural integrity and stability over extended cycles.As a result,NNMO-CaF delivers a high specific capacity of 119.5 mA h g^(-1)at a current density of 120 mA g^(-1)with a capacity retention of 87.1%after 100 cycles.This study presents a promising strategy to mitigate the challenges posed by multiple phase transitions and augment Na^(+)diffusion kinetics,thus paving the way for high-performance layered cathode materials in sodium-ion batteries.

Exceptional Performance of 3D Additive Manufactured NiFe Phosphite Oxyhydroxide Hollow Tubular Lattice Plastic Electrode for Large-Current-Density Water Oxidization

In this article,we report a 3D NiFe phosphite oxyhydroxide plastic electrode using high-resolution digital light processing(DLP)3D-printing technology via induced chemical deposition method.The as-prepared 3D plastic electrode exhibits no template requirement,freedom design,low-cost,robust,anticorrosion,lightweight,and micro-nano porous characteristics.It can be drawn to the conclusion that highly oriented open-porous 3D geometry structure will be beneficial for improving surface catalytic active area,wetting performance,and reaction–diffusion dynamics of plastic electrodes for oxygen evolution reaction(OER)catalysis process.Density functional theory(DFT)calculation interprets the origin of high activity of NiFe(PO_(3))O(OH)and demonstrates that the implantation of the–PO_(3)can effectively bind the 3d orbital of Ni in NiFe(PO_(3))O(OH),lead to the weak adsorption of intermediate,make electron more active to improve the conductivity,thereby lowing the transform free energy of*O to*OOH.The water oxidization performance of as-prepared 3D NiFe(PO_(3))O(OH)hollow tubular(HT)lattice plastic electrode has almost reached the state-of-the-art level compared with the as-reported large-current-density catalysts or 3D additive manufactured plastic/metal-based electrodes,especially for high current OER electrodes.This work breaks through the bottleneck that plagues the performance improvement of low-cost high-current electrodes.

3D printing of poly(ethyleneimine)-functionalized Mg-Al mixed metal oxide monoliths for direct air capture of CO_(2)

Direct air capture(DAC)of CO_(2)plays an indispensable role in achieving carbon-neutral goals as one of the key negative emission technologies.Since large air flows are required to capture the ultradilute CO_(2)from the air,lab-synthesized adsorbents in powder form may cause unacceptable gas pressure drops and poor heat and mass transfer efficiencies.A structured adsorbent is essential for the implementation of gas-solid contactors for cost-and energy-efficient DAC systems.In this study,efficient adsorbent poly(ethyleneimine)(PEI)-functionalized Mg-Al-CO_(3)layered double hydroxide(LDH)-derived mixed metal oxides(MMOs)are three-dimensional(3D)printed into monoliths for the first time with more than 90%adsorbent loadings.The printing process has been optimized by initially printing the LDH powder into monoliths followed by calcination into MMO monoliths.This structure exhibits a 32.7%higher specific surface area and a 46.1%higher pore volume,as compared to the direct printing of the MMO powder into a monolith.After impregnation of PEI,the monolith demonstrates a large adsorption capacity(1.82 mmol/g)and fast kinetics(0.7 mmol/g/h)using a CO_(2)feed gas at 400 ppm at 25℃,one of the highest values among the shaped DAC adsorbents.Smearing of the amino-polymers during the post-printing process affects the diffusion of CO_(2),resulting in slower adsorption kinetics of pre-impregnation monoliths compared to post-impregnation monoliths.The optimal PEI/MeOH ratio for the post-impregnation solution prevents pores clogging that would affect both adsorption capacity and kinetics.

Designing ultrastable P2/O3-type layered oxides for sodium ion batteries by regulating Na distribution and oxygen redox chemistry

P2/O3-type Ni/Mn-based layered oxides are promising cathode materials for sodium-ion batteries(SIBs)owing to their high energy density.However,exploring effective ways to enhance the synergy between the P2 and 03 phases remains a necessity.Herein,we design a P2/O3-type Na_(0.76)Ni_(0.31)Zn_(0.07)Mn_(0.50)Ti_(0.12)0_(2)(NNZMT)with high chemical/electrochemical stability by enhancing the coupling between the two phases.For the first time,a unique Na*extraction is observed from a Na-rich O3 phase by a Na-poor P2 phase and systematically investigated.This process is facilitated by Zn^(2+)/Ti^(4+)dual doping and calcination condition regulation,allowing a higher Na*content in the P2 phase with larger Na^(+)transport channels and enhancing Na transport kinetics.Because of reduced Na^(+)in the O3 phase,which increases the difficulty of H^(+)/Na^(+) exchange,the hydrostability of the O3 phase in NNZMT is considerably improved.Furthermore,Zn^(2+)/Ti^(4+)presence in NNZMT synergistically regulates oxygen redox chemistry,which effectively suppresses O_(2)/CO_(2) gas release and electrolyte decomposition,and completely inhibits phase transitions above 4.0 V.As a result,NNZMT achieves a high discharge capacity of 144.8 mA h g^(-1) with a median voltage of 3.42 V at 20 mA g^(-1) and exhibits excellent cycling performance with a capacity retention of 77.3% for 1000 cycles at 2000 mA g^(-1).This study provides an effective strategy and new insights into the design of high-performance layered-oxide cathode materials with enhanced structure/interface stability forSIBs.

EFFECT OF ELECTRODEPOSITED Cr_2O_3 OXIDE FILM ON THE OXIDATION OF Fe_3Al

A uniform, dense and defect free Cr2O3 thin film, which is amorphous at ambient temperature, was applied on the surface of intermetallic Fe3Al by electrodeposition reaction sintering, and the effect of this film on the oxidation of Fe3Al at 900 ℃ in air was studied. The films and the oxide scales were analyzed by TEM, EDAX,SEM and XRD.It is proved that, by surface applied Cr2O3 thin film,a continuous, protective,fine grained α-Al2O3 scale was formed on Fe3Al. As a result, the adherence of the scale and oxidation resistance of Fe3Al were improved.

基于NOD样受体3炎性小体通路对利拉鲁肽在氧化低密度脂蛋白诱导内皮细胞损伤的作用机制研究

背景动脉粥样硬化是世界范围内引起心脑血管疾病最主要的原因,炎症是目前研究热点,其中NOD样受体3(NLRP3)是研究最为深入的炎症小体。胰高糖素样肽1(GLP-1)受体激动剂有抗动脉粥样硬化作用,具体机制尚不明确。目的研究利拉鲁肽通过拮抗氧化低密度脂蛋白(ox-LDL)诱导的内皮细胞损伤的作用机制。方法2022-03-25—05-19培养人脐静脉内皮细胞(HUVEC),取HUVEC加空白血清作为对照组,100μg/mL的ox-LDL干预HUVEC 48 h作为模型组,100μg/mL的ox-LDL干预HUVEC 24 h后分别加入100、200、400 nmol/L利拉鲁肽处理24 h作为利拉鲁肽低浓度组、利拉鲁肽中浓度组、利拉鲁肽高浓度组。CCK-8法计算细胞增殖率。通过扫描电镜观察焦亡细胞形态。检测乳酸脱氢酶(LDH)活力。酶联免疫吸附试验(ELISA)检测白介素(IL)-1β、IL-18表达水平。蛋白质免疫印迹试验(Western blot)检测NLRP3、接头蛋白凋亡相关斑点样蛋白(ASC)、天冬氨酸蛋白水解酶1(Caspase-1)、焦亡执行蛋白(GSDMD)、N端结构域的焦亡执行蛋白(N-GSDMD)表达水平。结果模型组、利拉鲁肽低浓度组和利拉鲁肽中浓度组细胞增殖率低于对照组,利拉鲁肽低浓度组、利拉鲁肽中浓度组、利拉鲁肽高浓度组细胞增殖率高于模型组(P<0.05)。细胞扫描电镜结果示模型组细胞焦亡明显,利拉鲁肽低浓度组、利拉鲁肽中浓度组、利拉鲁肽高浓度组细胞焦亡情况明显改善。模型组、利拉鲁肽低浓度组LDH活力高于对照组,利拉鲁肽低浓度组、利拉鲁肽中浓度组、利拉鲁肽高浓度组低于模型组(P<0.05)。模型组、利拉鲁肽低浓度组IL-1β表达水平高于对照组,利拉鲁肽中浓度组、利拉鲁肽高浓度组IL-1β表达水平低于模型组(P<0.05);模型组IL-18表达水平高于对照组,利拉鲁肽低浓度组、利拉鲁肽中浓度组、利拉鲁肽高浓度组IL-18表达水平低于模型组(P<0.05)。模型组NLRP3、ASC、Caspase-1、GSDMD、N-GSDMD表达水平高于对照组,利拉鲁肽低浓度组ASC、Caspase-1表达水平高于对照组,利拉鲁肽中浓度组NLRP3、ASC表达水平低于模型组,利拉鲁肽高浓度组NLRP3、ASC、Caspase-1表达水平低于模型组(P<0.05)。结论利拉鲁肽显著抑制ox-LDL诱导的内皮细胞NLRP3炎性小体活化,并且能够抑制内皮细胞的焦亡,具有抗动脉粥样硬化作用。

High‑Entropy Layered Oxide Cathode Enabling High‑Rate for Solid‑State Sodium‑Ion Batteries

Na-ion O3-type layered oxides are prospective cathodes for Na-ion batteries due to high energy density and low-cost.Nevertheless,such cathodes usually suffer from phase transitions,sluggish kinetics and air instability,making it difficult to achieve high performance solid-state sodium-ion batteries.Herein,the high-entropy design and Li doping strategy alleviate lattice stress and enhance ionic conductivity,achieving high-rate performance,air stability and electrochemically thermal stability for Na_(0.95)Li_(0.06)Ni_(0.25)Cu_(0.05)Fe_(0.15)Mn_(0.49)O_(2).This cathode delivers a high reversible capacity(141 mAh g^(−1)at 0.2C),excellent rate capability(111 mAh g^(−1)at 8C,85 mAh g^(−1)even at 20C),and long-term stability(over 85%capacity retention after 1000 cycles),which is attributed to a rapid and reversible O3–P3 phase transition in regions of low voltage and suppresses phase transition.Moreover,the compound remains unchanged over seven days and keeps thermal stability until 279℃.Remarkably,the polymer solid-state sodium battery assembled by this cathode provides a capacity of 92 mAh g^(−1)at 5C and keeps retention of 96%after 400 cycles.This strategy inspires more rational designs and could be applied to a series of O3 cathodes to improve the performance of solid-state Na-ion batteries.

Ni doped La_(0.6)Sr_(0.4)FeO_(3-δ) symmetrical electrode for solid oxide fuel cells

The conventional Ni cermet anode suffers from severe carbon deposition and sulfur poisoning when fossil fuels are used. Alternative anode materials are desired for high performance hydrocarbon fuel solid oxide fuel cells （SOFCs）. We report the rational design of a very active Ni doped La0.6Sr0.4FeO3‐δ（LSFN） electrode for hydrocarbon fuel SOFCs. Homogeneously dispersed Ni‐Fe alloy nanoparticles were in situ extruded onto the surface of the LSFN particles during the operation of the cell. Sym‐metric SOFC single cells were prepared by impregnating a LSFN precursor solution onto a YSZ （yt‐tria stabilized zirconia） monolithic cell with a subsequent heat treatment. The open circuit voltage of the LSFN symmetric cell reached 1.18 and 1.0 V in humidified C3H8 and CH4 at 750？？, respective‐ly. The peak power densities of the cells were 400 and 230 mW/cm2 in humidified C3H8 and CH4, respectively. The electrode showed good stability in long term testing, which revealed LSFN has good catalytic activity for hydrocarbon fuel oxidation.

Mixed‑Dimensional Assembly Strategy to Construct Reduced Graphene Oxide/Carbon Foams Heterostructures for Microwave Absorption,Anti‑Corrosion and Thermal Insulation

Considering the serious electromagnetic wave(EMW)pollution problems and complex application condition,there is a pressing need to amalgamate multiple functionalities within a single substance.However,the effective integration of diverse functions into designed EMW absorption materials still faces the huge challenges.Herein,reduced graphene oxide/carbon foams(RGO/CFs)with two-dimensional/three-dimensional(2D/3D)van der Waals(vdWs)heterostructures were meticulously engineered and synthesized utilizing an efficient methodology involving freeze-drying,immersing absorption,secondary freeze-drying,followed by carbonization treatment.Thanks to their excellent linkage effect of amplified dielectric loss and optimized impedance matching,the designed 2D/3D RGO/CFs vdWs heterostructures demonstrated commendable EMW absorption performances,achieving a broad absorption bandwidth of 6.2 GHz and a reflection loss of-50.58 dB with the low matching thicknesses.Furthermore,the obtained 2D/3D RGO/CFs vdWs heterostructures also displayed the significant radar stealth properties,good corrosion resistance performances as well as outstanding thermal insulation capabilities,displaying the great potential in complex and variable environments.Accordingly,this work not only demonstrated a straightforward method for fabricating 2D/3D vdWs heterostructures,but also outlined a powerful mixeddimensional assembly strategy for engineering multifunctional foams for electromagnetic protection,aerospace and other complex conditions.

Sustainable Furfural Biomass Feedstocks Electrooxidation toward Value-Added Furoic Acid with Energy-Saving H_(2) Fuel Production Using Pt-Decorated Co_(3)O_(4) Nanospheres

Here,furfural oxidation was performed to replace the kinetically sluggish O_(2)evolution reaction(OER).Pt-Co_(3)O_(4)nanospheres were developed via pulsed laser ablation in liquid(PLAL)in a single step for the paired electrocatalysis of an H_(2)evolution reaction(HER)and furfural oxidation reaction(FOR).The FOR afforded a high furfural conversion(44.2%)with a major product of 2-furoic acid after a 2-h electrolysis at 1.55 V versus reversible hydrogen electrode in a 1.0-M KOH/50-mM furfural electrolyte.The Pt-Co_(3)O_(4)electrode exhibited a small overpotential of 290 mV at 10 mA cm^(-2).As an anode and cathode in an electrolyzer system,the Pt-Co_(3)O_(4)electrocatalyst required only a small applied cell voltage of~1.83 V to deliver 10 mA cm^(-2),compared with that of the pure water electrolyzer(OER||HER,~1.99 V).This study simultaneously realized the integrated production of energy-saving H_(2)fuel at the cathode and 2-furoic acid at the anode.

Enhanced visible-light photocatalytic degradation and disinfection performance of oxidized nanoporous g-C3N4 via decoration with graphene oxide quantum dots

Oxidized nanoporous g-C3N4(PCNO)decorated with graphene oxide quantum dots(ox-GQDs)was successfully prepared by a facile self-assembly method.As co-catalysts,the ultrasmall zero-dimensional(0 D)ox-GQDs can achieve uniform dispersion on the surface/inner channels of PCNO,as well as intimate contact with PCNO through hydrogen bonding,π-π,and chemical bonding interactions.In contrast with PCNO,the ox-GQDs/PCNO composite photocatalysts possessed improved light-harvesting ability,higher charge-transfer efficiency,enhanced photooxidation capacity,and increased amounts of reactive species due to the upconversion properties,strong electron capturing ability,and peroxidase-like activity of the ox-GQDs.Therefore,the visible-light photocatalytic degradation and disinfection performances of the ox-GQDs/PCNO composite were significantly enhanced.Remarkably,the composite with a 0.2 wt.% deposited amount of ox-GQDs(ox-GQDs-0.2%/PCNO)exhibited optimum amaranth photodegradation activity,with a corresponding rate about 3.1 times as high as that of PCNO.In addition,ox-GQDs-0.2%/PCNO could inactivate about 99.6%of Escherichia coli(E.coli)cells after 4 h of visible light irradiation,whereas only^31.9% of E.coli cells were killed by PCNO.Furthermore,h+,·O2-,and·OH were determined to be the reactive species generated in the photocatalytic process of the ox-GQDs/PCNO system;these species can thoroughly mineralize azo dyes and effectively inactivate pathogenic bacteria.

Effect of Dexamethasone on Nitric Oxide Synthase and Caspase-3 Gene Expressions in Endotoxemia in Neonate Rat Brain

Objective To investigate the gene and protein expressions of three isoforms of nitric oxide synthase (NOS) and gene expression of Caspase-3, and effect of dexamethasone on them in neonatal rats with lipopolysaccharide (LPS)-induced endotoxemic brain damage. Methods Expressions of the three isoforms of NOS and caspase-3 mRNA in the brain were investigated by RT-PCR in postnatal 7-day wistar rats with acute endotoxemia by intraperitoneal administration of LPS. Regional distributions of NOSs were examined by immunohistochemical technique. Results nNOS and Caspase-3 mRNA were obviously detected. eNOS mRNA was faintly expressed, but iNOS mRNA was undetectable in the control rat brain. The expressions of NOS mRNA of three isoforms were weak 2 h after LPS (5 mg/mg) delivery, peaked at 6 h, and thereafter, reduced gradually up to 24 h. The expression intensity was in the order of nNOS> iNOS> eNOS. Widespread nNOS, scattered eNOS distribution and negative iNOS were identified in the control rat brain and all isoforms of NOS could be induced by LPS which reached the apex at 24 h in the order of nNOS> iNOS> eNOS as detected by immunostaining. Although Caspase-3 mRNA could be found in all groups, DNA fragmentation was only seen at 6 h and 24 h. The expressions of NOS and Caspase-3 mRNA were inhibited in the rat brain when dexamethasone was administrated. Conclusion LPS-induced NO production induces apoptosis of neurons through mechanism involving the Caspase-3 activation, which may play an important role in the pathogenesis of brain damage during endotoxemia, and neuro-protective effects of dexamethasone may be partially realized by inhibiting the expression of NOS mRNA.

Effects of Cerium Oxide on Ni/Al_2O_3 Catalysts for Decomposition of CH_4 and C_2H_4

Characteristics of carbon deposition of CH 4 and C 2H 4 decomposition over supported Ni and Ni Ce catalysts were studied by using a pulse reaction as well as BET, TPR, XPS and hydrogen chemisorption techniques. It is found that there is a metal semiconductor interaction (MScI) in the Ni Ce catalyst, and the effect of MScI on the carbon deposition of CH 4 decomposition is opposite to that of C 2H 4. A novel model of carbon deposition of CH 4 or C 2H 4 decomposition was proposed.

Methane Oxidation to Synthesis Gas Using Lattice Oxygen of La_(1-x)Sr_xMO_(3-λ)(M =Fe,Mn) Perovskite Oxides Instead of Molecular Oxygen

In this paper, the partial oxidation of methane to synthesis gas using lattice oxygen of La1- SrxMO3-λ (M=Fe, x Mn) perovskite oxides instead of molecular oxygen was investigated. The redox circulation between 11% O2/Ar flow and 11% CH4/He flow at 900℃ shows that methane can be oxidized to CO and H2 with a selectivity of over 90.7% using the lattice oxygen of La1- SrxFeO3-λ (x≤0.2) perovskite oxides in an appropriate reaction condition, while the lost lattice x oxygen can be supplemented by air re-oxidation. It is viable for the lattice oxygen of La1- SrxFeO3-λ (x≤0.2) perovskite x oxides instead of molecular oxygen to react with methane to synthesis gas in the redox mode.

Magnetic Fe_3O_4-Reduced Graphene Oxide Nanocomposites-Based Electrochemical Biosensing

An electrochemical biosensing platform was developed based on glucose oxidase(GOx)/Fe3O4-reduced graphene oxide(Fe3O4-RGO) nanosheets loaded on the magnetic glassy carbon electrode(MGCE).With the advantages of the magnetism, conductivity and biocompatibility of the Fe3O4-RGO nanosheets, the nanocomposites could be facilely adhered to the electrode surface by magnetically controllable assembling and beneficial to achieve the direct redox reactions and electrocatalytic behaviors of GOx immobilized into the nanocomposites. The biosensor exhibited good electrocatalytic activity, high sensitivity and stability. The current response is linear over glucose concentration ranging from 0.05 to 1.5 m M with a low detection limit of0.15 μM. Meanwhile, validation of the applicability of the biosensor was carried out by determining glucose in serum samples. The proposed protocol is simple, inexpensive and convenient, which shows great potential in biosensing application.

Leaching kinetics of low grade zinc oxide ore in NH_3-NH_4Cl-H_2O system

The leaching kinetics of low grade zinc oxide ore in NH3-NH4Cl-H2O system was studied. The effects of ore particle size, reaction temperature and the sum concentration of ammonium ion and ammonia on the leaching efficiency of zinc were examined. The leaching kinetics of low-grade zinc oxide ore in NH3-NH4Cl-H2O system follows the kinetic law of shrinking-core model. The results show that diffusion through the inert particle pores is the leaching kinetics rate controlling step. The calculated apparent activation energy of the process is about 7.057 kJ/mol. The leaching efficiency of zinc is 92.1% under the conditions of ore particle size of 69 μm, holding at 80 ℃ for 60 min, sum ammonia concentration of 7.5 mol/L, the molar ratio of ammonium to ammonia being 2-1, and the ratio (g/mL) of solid to liquid being 1-10.

NF_3 decomposition over some metal oxides in the absence of water

NF3 decomposition in the absence of water over Al2O3, Fe2O3, Co3O4 and NiO, and transition metal oxides （Fe203, CO3O4 and NiO） coated Al2O3 reagents was investigated. The results show that Al2O3 is an active reagent for NF3 decomposition with 100% conversion lasting for 8.5 h at 400 ℃. Fe203, Co3O4 and NiO coated Al2O3 reagents are superior to bare Al2O3, and 5%Co3O4/Al2O3 has a high reactivity with NF3 full conversion maintaining for 10.5 h. It is suggested that the presence of transition metal oxide is beneficial to the reactivity of Al2O3, and results in a significant enhancement in the fluorination of Al2O3.

Insight into catalytic properties of Co3O4-CeO2 binary oxides for propane total oxidation

A series of Co3O4-CeO2 binary oxides with various Co/(Ce+Co)molar ratios were synthesized using a citric acid method,and their catalytic properties toward the total oxidation of propane were examined.The activities of the catalysts decrease in the order CoCeOx-70>CoCeOx-90>Co3O4>CoCeOx-50>CoCeOx-20>CeO2.CoCeOx-70(Co/(Ce+Co)=70% molar ratio)exhibits the highest catalytic activity toward the total oxidation of propane,of which the T90 is 310℃(GHSV=120000 mL h^-1 g^-1],which is 25℃ lower than that of pure Co3 O4.The enhancement of the catalytic performance of CoCeOx-70 is attributed to the strong interaction between CeO2 and Co3O4,the improvement of the low-temperature reducibility,and the increase in the number of active oxygen species.In-situ DRIFTS and reaction kinetics measurement reveal that Ce addition does not change the reaction mechanism,but promotes the adsorption and activation of propane on the catalyst surface.The addition of water vapor and CO2 in reactant gas has a negative effect on the propane conversion,and the catalyst is more sensitive to water vapor than to CO2.In addition,CoCeOx-70 exhibits excellent stability and reusability in water vapor and CO2 atmosphere.

Effects of Panax notoginseng saponins on apoptosis induced by hydrogen peroxide in cultured rabbit bone marrow stromal cells via altering the oxidative stress level and down-regulating caspase-3

Objective： To investigate the effects of Panax notoginseng saponins （PNS） on hydrogen peroxide （H2O2）-induced apoptosis in cultured rabbit bone marrow stromal cells （BMSCs）. Methods： The effects of different concentrations of PNS on proliferation and early osteoblast differentiation of BMSCs were determined by the MTT assay and an alkaline phosphatase （ALP） assay. An optimal effective concentration of PNS was determined and used in subsequent experiments. The cultured BMSCs were divided into three groups： untreated control, H2O2 treated, and PNS pretreatment of H2O2 treated. The oxidative stress level was assessed by superoxide dismutase （SOD） and malondialdehyde （MDA） assays. Flow cytometry was used to determine BMSC apoptosis by staining with annexinV-FITC/propidium iodide （PI）. The activity of caspase-3 enzyme was measured by spectrofluorometry. Results： PNS （0.1g/L） significantly increased both BMSC proliferation rate and ALP activity, while it decreased the indicators of oxidative stress, caspase-3 activity, and the apoptosis rate of BMSCs induced by H2O2.. Conclusion： PNS, acting as a biological antioxidant, had a protective effect on H2O2-induced apoptosis in cultured rabbit BMSCs by decreasing oxidative stress and down-regulating caspase-3.

Endogenous nitric oxide and hydrogen peroxide detection in indole-3-butyric acid-induced adventitious root formation in Camellia sinensis

Nitric oxide（NO）and hydrogen peroxide（H2O2）are essential signaling molecules with key roles in auxin induced adventitious root formation in many plants.However,whether they are the sole determinants for adventitious root formation is worth further study.In this study,endogenous NO and H2O2 were monitored in tea cutting with or without indole-3-butyric acid（IBA）treatment by using the fluorescent probes diaminofluorescein diacetate（DAF-2DA）and 2＇,7＇-dichlorodihydrofluorescein diacetate（DCF-DA）,respectively.The overproduction of NO and H2O2 was detected in the rooting parts of tea cuttings treated with or without IBA.But little NO and H2O2 was detected before the initiation phase of tea cuttings even with IBA treatment indicating that they might be not directly induced by IBA.Further carbon and nitrogen analysis found that the overproduction of NO and H2O2 were coincident with the consumption of soluble sugars and the assimilation of nitrogen.These results suggest that rooting phases should be taken into consideration with the hypothesis that auxin induces adventitious root formation via NO-and H2O2-dependent pathways and sink establishment might be a prerequisite for NO and H2O2 mediated adventitious root formation.