期刊文献+
共找到10篇文章
< 1 >
每页显示 20 50 100
Gas Sensitivity of Poly (3, 4-ethylene dioxythiophene) Prepared by a Modified LB Film Method
1
作者 郑华靖 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2011年第1期70-74,共5页
An arachidic acid/poly (3, 4-ethylene dioxythiophene) (AA/PEDOT) multilayer Langmuir-Blodgett (LB) film was prepared by a modified LB film method. The theories were utilized to explain the effects between HCl mo... An arachidic acid/poly (3, 4-ethylene dioxythiophene) (AA/PEDOT) multilayer Langmuir-Blodgett (LB) film was prepared by a modified LB film method. The theories were utilized to explain the effects between HCl molecule and LB film. The gas sensitivity mechanism of poly (3, 4-ethylene dioxythiophene) (PEDOT) multilayer film can be explained by the charge transfer between p system of PEDOT and oxidization HCl system. The gas sensitivity of PEDOT LB film deposited interdigital electrode to HCl was tested. The results showed that film thickness, treating temperature, deposition speed had different influence on film gas sensitivity. The AA/PEDOT film deposited device exhibited nonlinear behavior to HCl gas at lower concentration (20-60 ppm) and linear response behavior at higher gas concentration was observed. The time of the compound LB film of the AA/PEDOT responding to the 30 ppm HCl gas is about 20 seconds, which is far quicker than the time of the film to the PEDOTPRESS film(about 80 seconds). It is not higher film press to better film. When the film press attains 45 mNs/m, the sensitivity of the AA/PEDOT film on the contrary descends. 展开更多
关键词 poly (3 4-ethylene dioxythiophene (PEDOT) Langmuir-Blodgett (LB) film method gas sensitivity measurement
下载PDF
High corrosion-resistant silver nanowire/poly(3,4-ethylene dioxythiophene)/poly(styrene sulfonate)@nickel electrode for transparent electromagnetic shielding film 被引量:2
2
作者 Xuyang Zhang Jiaqi Shan +4 位作者 Cuilan Liu Zhengliang Li Xingzhong Guo Xiaoyu Zhao Hui Yang 《Journal of Materiomics》 SCIE 2022年第6期1191-1198,共8页
Silver nanowire(AgNW)has become one of the best candidates for flexible transparent electromagnetic(EMI)shielding materials,while the low corrosion resistance of AgNW hinders its application in environments with high ... Silver nanowire(AgNW)has become one of the best candidates for flexible transparent electromagnetic(EMI)shielding materials,while the low corrosion resistance of AgNW hinders its application in environments with high content of corrosive substances.Herein,an AgNW/poly(3,4-ethylene dioxythiophene)/poly(styrene sulfonate)(PEDOT:PSS)@nickel electrode was prepared through ultrasonic spray coating and electroplating methods.PEDOT:PSS is sprayed to improve the conductivity of the AgNW network,and a 9.8-16.5 nm Ni layer is deposited on the AgNW/PEDOT:PSS to protect the AgNWs from corrosion.The AgNW/PEDOT:PSS@Ni electrode shows a sheet resistance of 29 U·sq^(-1),a transmittance of 78.18%,an average EMI shielding efficiency of 19.64 dB and excellent corrosion resistance in Na2S solution.The resultant AgNW/PEDOT:PSS@Ni electrode is promisingly used in high corrosion resistance transparent EMI shielding film. 展开更多
关键词 Silver nanowire poly(3 4-ethylene dioxythiophene)/poly(styrene sulfonate) Nickel Electroplate
原文传递
Synthesis, Crystal Structure, and Photoluminescent Property of a 2-Fold Interpenetrating Znic(Ⅱ) Coordination Polymer with 2,5-Dicarboxylic Acid-3,4-ethylene Dioxythiophene
3
作者 李召好 周毓璇 倪园园 《Chinese Journal of Structural Chemistry》 SCIE CAS CSCD 2020年第9期1729-1734,1558,共7页
A three-dimensional coordination polymer,[Zn2(L)2(bpp)(H2O)2]n(H2L=2,5-dicarboxylic acid-3,4-ethylene dioxythiophene,bpp=1,3-di(4-pyridyl)propane),was synthesized with high yield under solvothermal reaction conditions... A three-dimensional coordination polymer,[Zn2(L)2(bpp)(H2O)2]n(H2L=2,5-dicarboxylic acid-3,4-ethylene dioxythiophene,bpp=1,3-di(4-pyridyl)propane),was synthesized with high yield under solvothermal reaction conditions and structurally characterized by elemental analysis,infrared spectra,thermogravimetric analysis,powder X-ray diffraction and single-crystal X-ray diffraction analysis.It crystallizes in orthorhombic space group Pnma with a=16.6542(9),b=18.0868(10),c=10.7528(5)?,V=3239.0(3)?3,Z=4,Dc=1.684 g/cm3,Mr=821.38,Dc=1.684 g/cm3,μ=1.683 mm-1,F(000)=1672,R=0.0466,wR=0.0933 and S=1.066.The compound exhibits a three-dimensional structure,which can be simplified into a 2-fold interpenetrated pcu topological network.Moreover,it displays luminescence emission in the solid state at room temperature. 展开更多
关键词 coordination polymer 2 5-dicarboxylic acid-3 4-ethylene dioxythiophene 1 3-bis(4-pyridyl)propane crystal structure photoluminescent property
原文传递
A Novel Layer Structure of a Capric Acid and 1,2-Bis(4-pyridyl)-ethylene Complex with Reverse Alkyl Chains Interdigitattion
4
作者 WU Ying ZHANG Jing +3 位作者 HOU Xue-liang YE Ling YANG Guang-di WU Li-xin 《Chemical Research in Chinese Universities》 SCIE CAS CSCD 2002年第4期471-473,共3页
关键词 Bis(4-pyridyl)-ethylene Capric acid Z-like structure Hydrogen-bond complex
下载PDF
聚(3,4-乙撑二氧噻吩)的二次掺杂改性研究 被引量:2
5
作者 李宝铭 郑玉婴 张伟 《半导体光电》 CAS CSCD 北大核心 2010年第6期876-879,共4页
利用乙二醇(EG)对聚(3,4-乙撑二氧噻吩)(PEDOT)进行二次掺杂改性,考察了二次掺杂PEDOT薄膜的电学性能、表面形貌和分子组成,并且对PEDOT的二次掺杂改性机理进行了探讨。研究发现,未进行二次掺杂时,PEDOT导电颗粒因被绝缘的聚苯磺酸(PSS... 利用乙二醇(EG)对聚(3,4-乙撑二氧噻吩)(PEDOT)进行二次掺杂改性,考察了二次掺杂PEDOT薄膜的电学性能、表面形貌和分子组成,并且对PEDOT的二次掺杂改性机理进行了探讨。研究发现,未进行二次掺杂时,PEDOT导电颗粒因被绝缘的聚苯磺酸(PSS)包埋而不能彼此接触,电荷在PEDOT薄膜中的传导由隧道效应占主导,薄膜的电导率较低。二次掺杂后,PEDOT与PSS发生相分离,同时PSS的相对含量降低,PEDOT导电颗粒间形成导电通道,薄膜的电导率较高。 展开更多
关键词 聚(3 4-乙撑二氧噻吩) 乙二醇 掺杂 电学性能
下载PDF
盐酸阿霉素分子印迹传感器的制备及识别特性 被引量:6
6
作者 张燕 郑晶 +1 位作者 王娟 郭满栋 《高等学校化学学报》 SCIE EI CAS CSCD 北大核心 2016年第5期860-866,共7页
采用自组装以及电聚合的方法,在磷酸盐缓冲液(PBS)中以3,4-乙烯二氧噻吩(EDOT)为功能单体,盐酸阿霉素(DOX)为模板,在金电极表面电聚合制备DOX印迹敏感膜(MIPs),构建了一种选择性检测DOX的分子印迹电化学传感器.采用循环伏安法(CV)及交... 采用自组装以及电聚合的方法,在磷酸盐缓冲液(PBS)中以3,4-乙烯二氧噻吩(EDOT)为功能单体,盐酸阿霉素(DOX)为模板,在金电极表面电聚合制备DOX印迹敏感膜(MIPs),构建了一种选择性检测DOX的分子印迹电化学传感器.采用循环伏安法(CV)及交流阻抗法(EIS)对其性能进行了表征.优化实验条件后,在含0.005 mol/L K3[Fe(CN)_6]及0.1 mol/L KCl的PBS中,应用差分脉冲伏安法(DPV)测试了该传感器的响应性能.实验结果表明,该传感器检测DOX的线性范围为4.0×10^(-7)~1.0×10^(-6)mol/L,相关系数为0.9967,检出限(S/N=3)达6.5×10^(-8)mol/L;采用电化学洗脱法可使传感器再生,对DOX的测定具有良好重现性及稳定性;该传感器对于干扰物长春碱、放线菌素D及5-氟尿嘧啶有微弱的电流响应,显示出良好的选择性.将该传感器用于人体血样中盐酸阿霉素的分析,回收率为96.0%~106.7%,表明其具有潜在的实用价值. 展开更多
关键词 分子印迹聚合物 电化学传感器 3 4-乙烯二氧噻吩 盐酸阿霉素
下载PDF
纤维表面原位化学氧化聚合制备复合导电可纺纤维
7
作者 夏友谊 陆云 《功能材料》 EI CAS CSCD 北大核心 2008年第3期395-397,402,共4页
采用原位化学氧化聚合方法在纤维(聚丙烯腈、蚕丝蛋白)表面生长导电聚合物(聚苯胺、聚吡咯和聚3,4-乙撑二氧噻吩),制备得到纤维表面均匀覆盖导电聚合物的复合导电可纺纤维,其电导率随不同的纤维、不同的导电聚合物而处于10^-1~1... 采用原位化学氧化聚合方法在纤维(聚丙烯腈、蚕丝蛋白)表面生长导电聚合物(聚苯胺、聚吡咯和聚3,4-乙撑二氧噻吩),制备得到纤维表面均匀覆盖导电聚合物的复合导电可纺纤维,其电导率随不同的纤维、不同的导电聚合物而处于10^-1~10^-2S/cm。纤维表面与导电聚合物的相互作用改善了原纤维的耐热性能,但对其力学性能没有造成伤害。 展开更多
关键词 聚丙烯腈 蚕丝蛋白 聚苯胺 聚吡咯 聚3 4-乙撑二氧噻吩
下载PDF
分子印迹涂层的茉莉酸类植物激素固相微萃取应用 被引量:4
8
作者 马茜文 周灿 +1 位作者 黄品 党雪平 《湖北大学学报(自然科学版)》 CAS 2019年第4期427-434,共8页
通过电化学方法制备以顺式-茉莉酮(CJ)为模板的分子印记聚3,4-乙烯二氧噻吩涂层(CJ-MI/PEDOT),与气相色谱(GC)联用,建立植物组织中茉莉酸类植物激素(JAs)的CJ-MI/PEDOT-GC分离分析方法,优化萃取条件如盐度、搅拌速率、萃取时间和萃取温... 通过电化学方法制备以顺式-茉莉酮(CJ)为模板的分子印记聚3,4-乙烯二氧噻吩涂层(CJ-MI/PEDOT),与气相色谱(GC)联用,建立植物组织中茉莉酸类植物激素(JAs)的CJ-MI/PEDOT-GC分离分析方法,优化萃取条件如盐度、搅拌速率、萃取时间和萃取温度.方法检出限(LOD)为2. 0 ng m L-1,线性范围为8 1 000 ng·m L-1(R2=0. 992 1).该方法提高了PEDOT涂层对于目标物的选择性,已成功应用于植物组织中茉莉酸类植物激素的检测. 展开更多
关键词 气相色谱 顶空固相微萃取 分子印记 聚3 4-乙烯二氧噻吩 茉莉酮 茉莉酸甲酯
下载PDF
浓乳液模板法制备导电聚苯乙烯泡沫材料
9
作者 杨伟霞 邹威 +2 位作者 杜中杰 励杭泉 张晨 《中国塑料》 CAS CSCD 北大核心 2016年第4期35-39,共5页
以两亲性导电聚合物聚(3,4-乙烯二氧噻吩)/聚苯乙磺酸(PEDOT/PSS)为表面活性剂、多壁碳纳米管(MWCNTs)为导电填料,通过浓乳液模板法制备了聚苯乙烯导电泡沫复合材料(PS/MWCNTs)。采用扫描电子显微镜观察了不同MWCNTs负载量对材料泡孔形... 以两亲性导电聚合物聚(3,4-乙烯二氧噻吩)/聚苯乙磺酸(PEDOT/PSS)为表面活性剂、多壁碳纳米管(MWCNTs)为导电填料,通过浓乳液模板法制备了聚苯乙烯导电泡沫复合材料(PS/MWCNTs)。采用扫描电子显微镜观察了不同MWCNTs负载量对材料泡孔形貌的影响,并通过导电性能测试研究了材料的电导率随MWCNTs及导电表面活性剂含量的变化规律。结果表明,填料负载量可以影响泡沫材料的泡孔形态与导电性能,并且具有表面活性剂性能的导电聚合物的引入大大提高了PS/MWCNTs泡沫材料的导电性。 展开更多
关键词 聚苯乙烯 聚(3 4-乙烯二氧噻吩) 聚苯乙磺酸 多壁碳纳米管 浓乳液 导电性
下载PDF
InCl_3提高聚乙撑二氧噻吩/聚对苯乙烯磺酸(PEDOT/PSS)的电导率
10
作者 刘兵 于名讯 潘士兵 《塑料工业》 CAS CSCD 北大核心 2018年第3期139-142,共4页
通过添加金属盐离子三氯化铟(InCl_3),成功制得高电导率聚乙撑二氧噻吩/聚对苯乙烯磺酸(PEDOT/PSS)薄膜。薄膜的电导率增加了数百倍,并且透光率降低不大,达到了73%。通过红外光谱(FTIR)、X射线光电子能谱(XPS)以及原子力扫描显微镜(AFM... 通过添加金属盐离子三氯化铟(InCl_3),成功制得高电导率聚乙撑二氧噻吩/聚对苯乙烯磺酸(PEDOT/PSS)薄膜。薄膜的电导率增加了数百倍,并且透光率降低不大,达到了73%。通过红外光谱(FTIR)、X射线光电子能谱(XPS)以及原子力扫描显微镜(AFM)分析发现,添加InCl_3后,PEDOT/PSS的本征结构并没有发生变化,可能导致其链结构发生一些改变;加入InCl_3会导致包裹在核壳结构的PSS量减少,使得电导率增加。 展开更多
关键词 三氯化铟 聚乙撑二氧噻吩/聚对苯乙烯磺酸 电导率
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部