With the application of resins in various fields, numerous waste resins that are difficult to treat have been produced. The industrial wastewater containing Cr(Ⅵ) has severely polluted soil and groundwater environmen...With the application of resins in various fields, numerous waste resins that are difficult to treat have been produced. The industrial wastewater containing Cr(Ⅵ) has severely polluted soil and groundwater environments, thereby endangering human health. Therefore, in this paper, a novel functionalized mesoporous adsorbent PPR-Z was synthesized from waste amidoxime resin for adsorbing Cr(Ⅵ). The waste amidoxime resin was first modified with H3PO4 and ZnCl_(2), and subsequently, it was carbonized through slow thermal decomposition. The static adsorption of PPR-Z conforms to the pseudo-second-order kinetic model and Langmuir isotherm, indicating that the Cr(Ⅵ) adsorption by PPR-Z is mostly chemical adsorption and exhibits single-layer adsorption. The saturated adsorption capacity of the adsorbent for Cr(Ⅵ) could reach 255.86 mg/g. The adsorbent could effectively reduce Cr(Ⅵ) to Cr(Ⅲ) and decrease the toxicity of Cr(Ⅵ) during adsorption. PPR-Z exhibited Cr(Ⅵ) selectivity in electroplating wastewater. The main mechanisms involved in the Cr(Ⅵ) adsorption are the chemical reduction of Cr(Ⅵ) into Cr(Ⅲ) and electrostatic and coordination interactions. Preparation of PPR-Z not only solves the problem of waste resin treatment but also effectively controls Cr(Ⅵ) pollution and realizes the concept of “treating waste with waste”.展开更多
Utilizing biomass waste as a potential resource for cellulose production holds promise in mitigating environmental consequences.The current study aims to utilize pineapple biowaste extract in producing bacterial cellu...Utilizing biomass waste as a potential resource for cellulose production holds promise in mitigating environmental consequences.The current study aims to utilize pineapple biowaste extract in producing bacterial cellulose acetate-based membranes with magnetic nanoparticles(Fe_(3)O_(4)nanoparticles)through the fermentation and esterification process and explore its characteristics.The bacterial cellulose fibrillation used a high-pressure homogenization procedure,and membranes were developed incorporating 0.25,0.50,0.75,and 1.0 wt.%of Fe3O4 nanoparticles as magnetic nanoparticle for functionalization.The membrane characteristics were measured in terms of Scanning Electron Microscope,X-ray diffraction,Fourier Transform Infrared,Vibrating Sample Magnetometer,antibacterial activity,bacterial adhesion and dye adsorption studies.The results indicated that the surface morphology of membrane changes where the bacterial cellulose acetate surface looks rougher.The crystallinity index of membrane increased from 54.34%to 68.33%,and the functional groups analysis revealed that multiple peak shifts indicated alterations in membrane functional groups.Moreover,adding Fe_(3)O_(4)-NPs into membrane exhibits paramagnetic behavior,increases tensile strength to 73%,enhances activity against E.coli and S.aureus,and is successful in removing bacteria from wastewater of the river to 67.4%and increases adsorption for anionic dyes like Congo Red and Acid Orange.展开更多
Activated carbons calcined at 400˚C and 600˚C (AC-400 and AC-600), prepared using palm nuts, collected in the town of Franceville in Gabon, were used to study the dynamic adsorption of MnO<sub>4</sub>-<...Activated carbons calcined at 400˚C and 600˚C (AC-400 and AC-600), prepared using palm nuts, collected in the town of Franceville in Gabon, were used to study the dynamic adsorption of MnO<sub>4</sub>-</sup> ions in acidic media on fixed bed column and on the kinetic modeling of experimental data of breakthrough curves of MnO<sub>4</sub>-</sup> ions obtained. Results on the adsorption of MnO<sub>4</sub>-</sup> ions in fixed-bed dynamics obtained on AC-400 and AC-600 adsorbents beds indicated that the AC-400 bed appears to be the most efficient in removing MnO<sub>4</sub>-</sup> ions in acidic media. Indeed, the adsorbed amounts, the adsorbed capacities at saturation and the elimination percentage of MnO<sub>4</sub>-</sup> ions obtained with AC-400 (31.24 mg;52.06 mg·g<sup>-1</sup> and 41.65% respectively) were higher compared to those obtained with AC-600 (9.87 mg;16.45 mg·g<sup>-1</sup> and 17.79% respectively). The breakthrough curves kinetic modeling revealed that the Thomas model and the pseudo-first-order kinetic model were the most suitable models to describe the adsorption of MnO<sub>4</sub>-</sup> ions on adsorbents studied in our experimental conditions. The results of the intraparticle diffusion model showed that intraparticle diffusion was involved in the adsorption mechanism of MnO<sub>4</sub>-</sup> ions on investigated adsorbents and was not the limiting step and the only process controlling MnO<sub>4</sub>-</sup> ions adsorption. In contrast to AC-400, the intraparticle diffusion on AC-600 bed plays an important role in the adsorption mechanism of MnO<sub>4</sub>-</sup> ions.展开更多
To address the serious pollution of heavy metals in AMD,the difficulty and the high cost of treatment,Fe_(3)O_(4)-L was prepared by the chemical co-precipitation method.Based on the single-factor and RSM,the effects o...To address the serious pollution of heavy metals in AMD,the difficulty and the high cost of treatment,Fe_(3)O_(4)-L was prepared by the chemical co-precipitation method.Based on the single-factor and RSM,the effects of particle size,total Fe concentration,the molar ratio of Fe^(2+)to Fe^(3+)and water bath temperature on the removal of AMD by Fe_(3)O_(4)-L prepared by chemical co-precipitation method were analyzed.Static adsorption experiments were conducted on Cu^(2+),Zn^(2+)and Pb^(2+)using Fe_(3)O_(4)-L prepared under optimal conditions as adsorbents.The adsorption properties and mechanisms were analyzed by combining SEM-EDS,XRD and FTIR for characterization.The study showed that the effects of particle size,total Fe concentration and the molar ratio of Fe^(2+)to Fe^(3+)are larger.Obtained by response surface optimization analysis,the optimum conditions for the preparation of Fe_(3)O_(4)-L were a particle size of 250 mesh,a total Fe concentration of 0.5 mol/L,and a molar ratio of Fe^(2+)to Fe^(3+)of 1:2.Under these conditions,the removal rates of Cu^(2+),Zn^(2+),and Pb^(2+)were 94.52%,88.49%,and 96.69%respectively.The adsorption of Cu^(2+),Zn^(2+)and Pb^(2+)by Fe_(3)O_(4)-L prepared under optimal conditions reached equilibrium at 180 min,with removal rates of 99.99%,85.27%,and 97.48%,respectively.The adsorption reaction of Fe_(3)O_(4)-L for Cu^(2+)and Zn^(2+)is endothermic,while that for Pb^(2+)is exothermic.Fe_(3)O_(4)-L can still maintain a high adsorption capacity after five cycles of adsorption-desorption experiments.Cu^(2+),Zn^(2+)and Pb^(2+)mainly exist as CuFe_(2)O_(4),Zn(OH)2,ZnFe_(2)O_(4)and PbS after being adsorbed by Fe_(3)O_(4)-L,which is the result of the combination of physical diffusion,ion exchange and surface complexation reaction.展开更多
A novel porous coordination polymer,iron naphthalenedicarboxylate Fe（OH）（1,4-NDC）·2H2O is hydrothermally synthesized by the reaction of FeSO4·7H2O and 1,4-naphthalenedicarboxylic acid（1,4-H2NDC） at 150...A novel porous coordination polymer,iron naphthalenedicarboxylate Fe（OH）（1,4-NDC）·2H2O is hydrothermally synthesized by the reaction of FeSO4·7H2O and 1,4-naphthalenedicarboxylic acid（1,4-H2NDC） at 150℃.The compound crystallizes in a tetragonal space group P42/nmc：a=2.1447（4） nm,c=0.68849（14） nm,V=3.1669（11） nm3,Z=8,R=0.0845,wR=0.1829.The crystal structure exhibits a three-dimensional framework which is composed of infinite chains of corner-sharing octahedral Fe（OH）2O4 with 1,4-NDC ligands forming two types of channels with square-shaped cross-sections.The large channels present a cross-section of 0.76 nm×0.76 nm,while the small channels are about 0.30 nm×0.30 nm.No structural transformation occurs after removing the guest water molecules,while a robust structure generates with permanent porosity.The adsorption measurements show that the anhydrous sample of the compound can adsorb CO2 into its pores.The adsorption isotherms for methanol,acetone,tetrahydrofuran and benzene are also measured.展开更多
One porous framework [Zn4（μ4-O）（μ4-4-pca）3]·2（DEF）·2（H2O）（1, 4-H2Pca = 4-pyrazolecarboxylic acid, DEF = N,N-diethylformamide） with MOF-5 type topology has been synthesized solvothermally. Signifi...One porous framework [Zn4（μ4-O）（μ4-4-pca）3]·2（DEF）·2（H2O）（1, 4-H2Pca = 4-pyrazolecarboxylic acid, DEF = N,N-diethylformamide） with MOF-5 type topology has been synthesized solvothermally. Significantly, this compound exhibits high capacity of C2 hydrocarbons. C2H2 capacity could compare with the highest value of the reported MOFs, far exceeding that of MOF-5, as well as the high selectivity adsorption of C2s over C1.展开更多
The Schiff base form of the 4-acylpyrazolone ligand was immobilized on the silica surface by reaction of 3-aminopropyl silica with 4-acetyl-5-methyl-2-phenyl-2,4-dihydro-pyrazol-3-one in 97% yield, producing grafted s...The Schiff base form of the 4-acylpyrazolone ligand was immobilized on the silica surface by reaction of 3-aminopropyl silica with 4-acetyl-5-methyl-2-phenyl-2,4-dihydro-pyrazol-3-one in 97% yield, producing grafted silica with 0.77 mmol/g ligand loading. This surface modified silica was shown to be selective in the adsorption of Yb3+ ions from dilute aqueous solutions, for which 98% adsorption was observed from a 1.0×10-5 mol/L aq. solution at pH 6.7, after 24 h at room temperature. Six other lanthanides studied Eu3+, Gd3+, Nd3+, Tb3+, Sm3+ and La3+ showed moderate to weaker adsorptions of 39%, 28%, 16%, 12%, 11% and 5% respectively under similar conditions.展开更多
Three kinds of activated carbons were prepared using coconut-shells as carbon precursors and characterized by XRD, FT-IR and texture property test. The results indicate that the prepared activated carbons were mainly ...Three kinds of activated carbons were prepared using coconut-shells as carbon precursors and characterized by XRD, FT-IR and texture property test. The results indicate that the prepared activated carbons were mainly amorphous and only a few impurity groups were adsorbed on their surfaces. The texture property test reveals that the activated carbons displayed different texture properties, especially the micropore size distribution. The adsorption capacities of the activated carbons were investigated by adsorbing CH4, CO2, N2 and O2 at 25 ？C in the pressure range of 0-200 kPa. The results reveal that all the activated carbons had high CO2 adsorption capacity, one of which had the highest CO2 adsorption value of 2.55 mmol/g at 200 kPa. And the highest adsorption capacity for CH4 of the activated carbons can reach 1.93 mmol/g at 200 kPa. In the pressure range of 0-200 kPa, the adsorption capacities for N2 and O2 were increased linearly with the change of pressure and K-AC is an excellent adsorbent towards the adsorption separation of greenhouse gases.展开更多
A new medium-temperature (200-400 °C) adsorbent material for oxygen removal and air separation, YBaCo4O7+δ, was prepared by the solid-state reaction method. This new adsorbent could adsorb a large quantity of ox...A new medium-temperature (200-400 °C) adsorbent material for oxygen removal and air separation, YBaCo4O7+δ, was prepared by the solid-state reaction method. This new adsorbent could adsorb a large quantity of oxygen in the temperature range of 200-370 °C. Adsorbed oxygen could be released by raising temperature over 400 °C or by switching the atmosphere from oxygen to nitrogen. This oxygen adsorption and desorption process had good reproducibility. Taking advantage of this unique oxygen intake/release behavior, a nitrogen purification process was investigated. The results showed that YBaCo4O7+δ material was a promising candidate for the oxygen sorption process and could be used to produce high-purity nitrogen or to remove trace oxygen from other gases.展开更多
A novel photo-catalytic system composed of N-doped biochars(NBCs),MnFe_(2)O_(4) and sulfite activation under ultraviolet(NBCs/MnFe_(2)O_(4)/sulfite/UV)was constructed to realize the efficient eliminate of tetracycline...A novel photo-catalytic system composed of N-doped biochars(NBCs),MnFe_(2)O_(4) and sulfite activation under ultraviolet(NBCs/MnFe_(2)O_(4)/sulfite/UV)was constructed to realize the efficient eliminate of tetracycline(TC).As the carrier of MnFe_(2)O_(4),NBCs were synthesized from alfalfa,which has large specific surface area,graphite like structure and hierarchical porous structure.The adsorption isotherm indicated that NBCs/MnFe_(2)O_(4)-2:1 had the best adsorption performance for TC(347.56 mg g^(-1)).Through synergistic adsorption and photocatalysis,the removal rate of TC reached 84%,which was significantly higher than that of MnFe_(2)O_(4).Electrochemical impedance spectroscopy(EIS)and Photoluminescence(PL)characterization results showed that the introduction of NBCs improved the separation efficiency of photogenerated electron and hole pairs and enhanced the photocatalytic performance.Moreover,the adsorption,degradation mechanism and degradation path of TC by the catalyst were systematically analyzed by coupling HPLC–MS measurement with the theoretical calculation.Considering the advantages of excellent degradation performance,low cost,easy separation and environmental friendliness of NBCs/MnFe_(2)O_(4),this work was expected to provide a new path for the practical application of biochar.展开更多
Effects of NHj concentiation, solution/soil ratio and temperature on NH_4^+adsorption were studied in a Eum-Orthic Anthrosol. The slopes of the soil NH_4^+ adsorptionisotherms and the fitted n, the coefficient for the...Effects of NHj concentiation, solution/soil ratio and temperature on NH_4^+adsorption were studied in a Eum-Orthic Anthrosol. The slopes of the soil NH_4^+ adsorptionisotherms and the fitted n, the coefficient for the adsorption intensity, and kappa, the coefficientrelated to adsorption capacity, of the Freundlich equation increased with increasing solution/soilratio (SSR) and with decreasing temperature (T). For the range of experimental conditions, the valueof delta q/delta c, the rate of change of the amount of NH_4^+ adsorbed in the soil solid phase (q)with respect to the equilibrium concentration of NH_4^+ in soil solution (c), was 0.840, indicatingthat q increased with increasing c. From 2 to 45 deg C, delta q/delta SSR, the rate of change of qwith respect to SSR, decreased from 2.598 to 1.996, showing that q increased with increasing SSR,while its increasing rate decreased with temperature. From SSR 1:1 to 20:1, delta q/delta T, therate of change of q with respect to T, decreased from -- 0.095 to -- 0.361, indicating that qdecreased with increasing temperature, and at the same time the negative effect of temperaturebecame larger as SSR increased. Thus under the experimental conditions the order of importance indetermining the amount of NH_4^+ adsorbed in the soil solid phase was delta q/delta SSR > deltaq/delta c > |delta q/delta T|, indicating that the greatest effect on the amount of NH_4^+ adsorbedwas with the solution/soil ratio; the equilibrium concentration of NH_4^+ had a lesser effect; andtemperature had the least effect.展开更多
To exploit an effective adsorbent to separate hydrogen and methane, microporous titanium silicate molecular sieve NaETS-4 was synthesized and modified by strontium. The adsorption characteristics and diffusion behavio...To exploit an effective adsorbent to separate hydrogen and methane, microporous titanium silicate molecular sieve NaETS-4 was synthesized and modified by strontium. The adsorption characteristics and diffusion behaviors of the prepared titanosilicate molecular sieve were studied by concentration pulse chromatography. And the effects of ion-exchange and dehydration temperature on adsorbent structure and gas diffusion were also discussed. The results showed that the thermal stability and Henry＇s Law constants were enhanced and micropore diffusivity decreased after exchanging Na＋ with Sr2＋. With the increase of dehydration temperature, Henry＇s Law constant and micropore diffusivity of CI-I4 decreased in both NaETS-4 and SrETS-4. While for 1-12 in SrETS-4, the increase of Henry＇s Law constant and the decrease of diffusion rate can be attributed to the shrinks of pore diameter resulting from the relocation of Sr2＋. Correspondingly, the kinetic selectivity of H2/CH4 reached 8.91 indicating its potentiality in separating H2 and CH4.展开更多
The oxygen adsorption/desorption properties of YBaCo4O7 at high temperature were investigated by thermogravimetry(TG) method,in which two types of oxygen adsorption were combined.The first type adsorbed oxygen at abou...The oxygen adsorption/desorption properties of YBaCo4O7 at high temperature were investigated by thermogravimetry(TG) method,in which two types of oxygen adsorption were combined.The first type adsorbed oxygen at about 700 °C and released the adsorbed oxygen at 880 °C.After the first type oxygen desorption,even the temperature and oxygen flow were kept the same,a second type oxygen adsorption at about 880 °C occurred and the adsorbed oxygen were released at above 980 °C.The combination of these two types of...展开更多
基金supported by the National Natural Science Foundation of China (No.52364022)the Natural Science Foundation of Guangxi Province,China (Nos.2023JJA160192 and 2021GXNSFAA220096)+1 种基金the Guangxi Science and Technology Major Project,China (No.AA23073018)the Guangxi Chongzuo Science and Technology Plan,China (No.2023ZY00503).
文摘With the application of resins in various fields, numerous waste resins that are difficult to treat have been produced. The industrial wastewater containing Cr(Ⅵ) has severely polluted soil and groundwater environments, thereby endangering human health. Therefore, in this paper, a novel functionalized mesoporous adsorbent PPR-Z was synthesized from waste amidoxime resin for adsorbing Cr(Ⅵ). The waste amidoxime resin was first modified with H3PO4 and ZnCl_(2), and subsequently, it was carbonized through slow thermal decomposition. The static adsorption of PPR-Z conforms to the pseudo-second-order kinetic model and Langmuir isotherm, indicating that the Cr(Ⅵ) adsorption by PPR-Z is mostly chemical adsorption and exhibits single-layer adsorption. The saturated adsorption capacity of the adsorbent for Cr(Ⅵ) could reach 255.86 mg/g. The adsorbent could effectively reduce Cr(Ⅵ) to Cr(Ⅲ) and decrease the toxicity of Cr(Ⅵ) during adsorption. PPR-Z exhibited Cr(Ⅵ) selectivity in electroplating wastewater. The main mechanisms involved in the Cr(Ⅵ) adsorption are the chemical reduction of Cr(Ⅵ) into Cr(Ⅲ) and electrostatic and coordination interactions. Preparation of PPR-Z not only solves the problem of waste resin treatment but also effectively controls Cr(Ⅵ) pollution and realizes the concept of “treating waste with waste”.
文摘Utilizing biomass waste as a potential resource for cellulose production holds promise in mitigating environmental consequences.The current study aims to utilize pineapple biowaste extract in producing bacterial cellulose acetate-based membranes with magnetic nanoparticles(Fe_(3)O_(4)nanoparticles)through the fermentation and esterification process and explore its characteristics.The bacterial cellulose fibrillation used a high-pressure homogenization procedure,and membranes were developed incorporating 0.25,0.50,0.75,and 1.0 wt.%of Fe3O4 nanoparticles as magnetic nanoparticle for functionalization.The membrane characteristics were measured in terms of Scanning Electron Microscope,X-ray diffraction,Fourier Transform Infrared,Vibrating Sample Magnetometer,antibacterial activity,bacterial adhesion and dye adsorption studies.The results indicated that the surface morphology of membrane changes where the bacterial cellulose acetate surface looks rougher.The crystallinity index of membrane increased from 54.34%to 68.33%,and the functional groups analysis revealed that multiple peak shifts indicated alterations in membrane functional groups.Moreover,adding Fe_(3)O_(4)-NPs into membrane exhibits paramagnetic behavior,increases tensile strength to 73%,enhances activity against E.coli and S.aureus,and is successful in removing bacteria from wastewater of the river to 67.4%and increases adsorption for anionic dyes like Congo Red and Acid Orange.
文摘Activated carbons calcined at 400˚C and 600˚C (AC-400 and AC-600), prepared using palm nuts, collected in the town of Franceville in Gabon, were used to study the dynamic adsorption of MnO<sub>4</sub>-</sup> ions in acidic media on fixed bed column and on the kinetic modeling of experimental data of breakthrough curves of MnO<sub>4</sub>-</sup> ions obtained. Results on the adsorption of MnO<sub>4</sub>-</sup> ions in fixed-bed dynamics obtained on AC-400 and AC-600 adsorbents beds indicated that the AC-400 bed appears to be the most efficient in removing MnO<sub>4</sub>-</sup> ions in acidic media. Indeed, the adsorbed amounts, the adsorbed capacities at saturation and the elimination percentage of MnO<sub>4</sub>-</sup> ions obtained with AC-400 (31.24 mg;52.06 mg·g<sup>-1</sup> and 41.65% respectively) were higher compared to those obtained with AC-600 (9.87 mg;16.45 mg·g<sup>-1</sup> and 17.79% respectively). The breakthrough curves kinetic modeling revealed that the Thomas model and the pseudo-first-order kinetic model were the most suitable models to describe the adsorption of MnO<sub>4</sub>-</sup> ions on adsorbents studied in our experimental conditions. The results of the intraparticle diffusion model showed that intraparticle diffusion was involved in the adsorption mechanism of MnO<sub>4</sub>-</sup> ions on investigated adsorbents and was not the limiting step and the only process controlling MnO<sub>4</sub>-</sup> ions adsorption. In contrast to AC-400, the intraparticle diffusion on AC-600 bed plays an important role in the adsorption mechanism of MnO<sub>4</sub>-</sup> ions.
基金This work was supported by the National Natural Science Foundation of China(41672247)Liaoning Province’s“Program for Promoting Liaoning Talents”(XLYC1807159)+1 种基金the Discipline Innovation Team of Liaoning Technical University(LNTU20TD-21)the Liaoning Provincial Department of Education(LJKZ0324).
文摘To address the serious pollution of heavy metals in AMD,the difficulty and the high cost of treatment,Fe_(3)O_(4)-L was prepared by the chemical co-precipitation method.Based on the single-factor and RSM,the effects of particle size,total Fe concentration,the molar ratio of Fe^(2+)to Fe^(3+)and water bath temperature on the removal of AMD by Fe_(3)O_(4)-L prepared by chemical co-precipitation method were analyzed.Static adsorption experiments were conducted on Cu^(2+),Zn^(2+)and Pb^(2+)using Fe_(3)O_(4)-L prepared under optimal conditions as adsorbents.The adsorption properties and mechanisms were analyzed by combining SEM-EDS,XRD and FTIR for characterization.The study showed that the effects of particle size,total Fe concentration and the molar ratio of Fe^(2+)to Fe^(3+)are larger.Obtained by response surface optimization analysis,the optimum conditions for the preparation of Fe_(3)O_(4)-L were a particle size of 250 mesh,a total Fe concentration of 0.5 mol/L,and a molar ratio of Fe^(2+)to Fe^(3+)of 1:2.Under these conditions,the removal rates of Cu^(2+),Zn^(2+),and Pb^(2+)were 94.52%,88.49%,and 96.69%respectively.The adsorption of Cu^(2+),Zn^(2+)and Pb^(2+)by Fe_(3)O_(4)-L prepared under optimal conditions reached equilibrium at 180 min,with removal rates of 99.99%,85.27%,and 97.48%,respectively.The adsorption reaction of Fe_(3)O_(4)-L for Cu^(2+)and Zn^(2+)is endothermic,while that for Pb^(2+)is exothermic.Fe_(3)O_(4)-L can still maintain a high adsorption capacity after five cycles of adsorption-desorption experiments.Cu^(2+),Zn^(2+)and Pb^(2+)mainly exist as CuFe_(2)O_(4),Zn(OH)2,ZnFe_(2)O_(4)and PbS after being adsorbed by Fe_(3)O_(4)-L,which is the result of the combination of physical diffusion,ion exchange and surface complexation reaction.
基金The Natural Science Foundation of Jiangsu Province(No.BK2009262)the Scientific Research Foundation for the Returned Overseas Chinese Scholars,State Education Ministry
文摘A novel porous coordination polymer,iron naphthalenedicarboxylate Fe（OH）（1,4-NDC）·2H2O is hydrothermally synthesized by the reaction of FeSO4·7H2O and 1,4-naphthalenedicarboxylic acid（1,4-H2NDC） at 150℃.The compound crystallizes in a tetragonal space group P42/nmc：a=2.1447（4） nm,c=0.68849（14） nm,V=3.1669（11） nm3,Z=8,R=0.0845,wR=0.1829.The crystal structure exhibits a three-dimensional framework which is composed of infinite chains of corner-sharing octahedral Fe（OH）2O4 with 1,4-NDC ligands forming two types of channels with square-shaped cross-sections.The large channels present a cross-section of 0.76 nm×0.76 nm,while the small channels are about 0.30 nm×0.30 nm.No structural transformation occurs after removing the guest water molecules,while a robust structure generates with permanent porosity.The adsorption measurements show that the anhydrous sample of the compound can adsorb CO2 into its pores.The adsorption isotherms for methanol,acetone,tetrahydrofuran and benzene are also measured.
基金supported financially by the National Natural Science Foundation of China(No.21601080)the Key Scientific Research Projects of Higher Education of He'nan Province(16A150016)
文摘One porous framework [Zn4（μ4-O）（μ4-4-pca）3]·2（DEF）·2（H2O）（1, 4-H2Pca = 4-pyrazolecarboxylic acid, DEF = N,N-diethylformamide） with MOF-5 type topology has been synthesized solvothermally. Significantly, this compound exhibits high capacity of C2 hydrocarbons. C2H2 capacity could compare with the highest value of the reported MOFs, far exceeding that of MOF-5, as well as the high selectivity adsorption of C2s over C1.
基金Project supported by US Department of Energy Global Nuclear Energy Partnership (DOE-GNEP) grant DE-FG07-07ID14881
文摘The Schiff base form of the 4-acylpyrazolone ligand was immobilized on the silica surface by reaction of 3-aminopropyl silica with 4-acetyl-5-methyl-2-phenyl-2,4-dihydro-pyrazol-3-one in 97% yield, producing grafted silica with 0.77 mmol/g ligand loading. This surface modified silica was shown to be selective in the adsorption of Yb3+ ions from dilute aqueous solutions, for which 98% adsorption was observed from a 1.0×10-5 mol/L aq. solution at pH 6.7, after 24 h at room temperature. Six other lanthanides studied Eu3+, Gd3+, Nd3+, Tb3+, Sm3+ and La3+ showed moderate to weaker adsorptions of 39%, 28%, 16%, 12%, 11% and 5% respectively under similar conditions.
基金supported by the National Natural Science Foundation of China(Grant 20773090)the Specialized Research Fund for the Doctoral Program of Higher Education(Grant 200806100009)
文摘Three kinds of activated carbons were prepared using coconut-shells as carbon precursors and characterized by XRD, FT-IR and texture property test. The results indicate that the prepared activated carbons were mainly amorphous and only a few impurity groups were adsorbed on their surfaces. The texture property test reveals that the activated carbons displayed different texture properties, especially the micropore size distribution. The adsorption capacities of the activated carbons were investigated by adsorbing CH4, CO2, N2 and O2 at 25 ？C in the pressure range of 0-200 kPa. The results reveal that all the activated carbons had high CO2 adsorption capacity, one of which had the highest CO2 adsorption value of 2.55 mmol/g at 200 kPa. And the highest adsorption capacity for CH4 of the activated carbons can reach 1.93 mmol/g at 200 kPa. In the pressure range of 0-200 kPa, the adsorption capacities for N2 and O2 were increased linearly with the change of pressure and K-AC is an excellent adsorbent towards the adsorption separation of greenhouse gases.
基金Project supported by the Science and Technology Foundation of Henan Province (082300440140, 092102210263) and the Natural Science Foundation of Department of Education, lien,an Province (2009B430003)
文摘A new medium-temperature (200-400 °C) adsorbent material for oxygen removal and air separation, YBaCo4O7+δ, was prepared by the solid-state reaction method. This new adsorbent could adsorb a large quantity of oxygen in the temperature range of 200-370 °C. Adsorbed oxygen could be released by raising temperature over 400 °C or by switching the atmosphere from oxygen to nitrogen. This oxygen adsorption and desorption process had good reproducibility. Taking advantage of this unique oxygen intake/release behavior, a nitrogen purification process was investigated. The results showed that YBaCo4O7+δ material was a promising candidate for the oxygen sorption process and could be used to produce high-purity nitrogen or to remove trace oxygen from other gases.
基金gratefully acknowledge the financial support for this research from the National Natural Science Foundation of China(Grant No.:21978047,21776046)the Six Talent Climax Foundation of Jiangsu(Grant No.:XCL-079).
文摘A novel photo-catalytic system composed of N-doped biochars(NBCs),MnFe_(2)O_(4) and sulfite activation under ultraviolet(NBCs/MnFe_(2)O_(4)/sulfite/UV)was constructed to realize the efficient eliminate of tetracycline(TC).As the carrier of MnFe_(2)O_(4),NBCs were synthesized from alfalfa,which has large specific surface area,graphite like structure and hierarchical porous structure.The adsorption isotherm indicated that NBCs/MnFe_(2)O_(4)-2:1 had the best adsorption performance for TC(347.56 mg g^(-1)).Through synergistic adsorption and photocatalysis,the removal rate of TC reached 84%,which was significantly higher than that of MnFe_(2)O_(4).Electrochemical impedance spectroscopy(EIS)and Photoluminescence(PL)characterization results showed that the introduction of NBCs improved the separation efficiency of photogenerated electron and hole pairs and enhanced the photocatalytic performance.Moreover,the adsorption,degradation mechanism and degradation path of TC by the catalyst were systematically analyzed by coupling HPLC–MS measurement with the theoretical calculation.Considering the advantages of excellent degradation performance,low cost,easy separation and environmental friendliness of NBCs/MnFe_(2)O_(4),this work was expected to provide a new path for the practical application of biochar.
基金Project supported by the National Natural Science Foundation of China (No. 49901009).
文摘Effects of NHj concentiation, solution/soil ratio and temperature on NH_4^+adsorption were studied in a Eum-Orthic Anthrosol. The slopes of the soil NH_4^+ adsorptionisotherms and the fitted n, the coefficient for the adsorption intensity, and kappa, the coefficientrelated to adsorption capacity, of the Freundlich equation increased with increasing solution/soilratio (SSR) and with decreasing temperature (T). For the range of experimental conditions, the valueof delta q/delta c, the rate of change of the amount of NH_4^+ adsorbed in the soil solid phase (q)with respect to the equilibrium concentration of NH_4^+ in soil solution (c), was 0.840, indicatingthat q increased with increasing c. From 2 to 45 deg C, delta q/delta SSR, the rate of change of qwith respect to SSR, decreased from 2.598 to 1.996, showing that q increased with increasing SSR,while its increasing rate decreased with temperature. From SSR 1:1 to 20:1, delta q/delta T, therate of change of q with respect to T, decreased from -- 0.095 to -- 0.361, indicating that qdecreased with increasing temperature, and at the same time the negative effect of temperaturebecame larger as SSR increased. Thus under the experimental conditions the order of importance indetermining the amount of NH_4^+ adsorbed in the soil solid phase was delta q/delta SSR > deltaq/delta c > |delta q/delta T|, indicating that the greatest effect on the amount of NH_4^+ adsorbedwas with the solution/soil ratio; the equilibrium concentration of NH_4^+ had a lesser effect; andtemperature had the least effect.
基金supported by Yunnan Natural Science Foundation(No.2010CD026)Kunming University of Science and Technology Science Foundation(No.kkz3201205022)+1 种基金Analysis and Testing Foundation of Kunming University of Science and Technology(20140805)the National Natural Science Foundation of China(No.21301079)
文摘To exploit an effective adsorbent to separate hydrogen and methane, microporous titanium silicate molecular sieve NaETS-4 was synthesized and modified by strontium. The adsorption characteristics and diffusion behaviors of the prepared titanosilicate molecular sieve were studied by concentration pulse chromatography. And the effects of ion-exchange and dehydration temperature on adsorbent structure and gas diffusion were also discussed. The results showed that the thermal stability and Henry＇s Law constants were enhanced and micropore diffusivity decreased after exchanging Na＋ with Sr2＋. With the increase of dehydration temperature, Henry＇s Law constant and micropore diffusivity of CI-I4 decreased in both NaETS-4 and SrETS-4. While for 1-12 in SrETS-4, the increase of Henry＇s Law constant and the decrease of diffusion rate can be attributed to the shrinks of pore diameter resulting from the relocation of Sr2＋. Correspondingly, the kinetic selectivity of H2/CH4 reached 8.91 indicating its potentiality in separating H2 and CH4.
基金supported by Science and Technology Foundation of Henan Province,China (092102210263)Natural Science Foundation of Department of Education of Henan Province,China (2009B430003)
文摘The oxygen adsorption/desorption properties of YBaCo4O7 at high temperature were investigated by thermogravimetry(TG) method,in which two types of oxygen adsorption were combined.The first type adsorbed oxygen at about 700 °C and released the adsorbed oxygen at 880 °C.After the first type oxygen desorption,even the temperature and oxygen flow were kept the same,a second type oxygen adsorption at about 880 °C occurred and the adsorbed oxygen were released at above 980 °C.The combination of these two types of...
