A novel fluorescent probe for H_2PO_4^- was designed and fabricated based on the carbon dots/Fe^（3＋） composite. The carbon dots were synthesized by an established one-pot hydrothermal method and characterized by tr...A novel fluorescent probe for H_2PO_4^- was designed and fabricated based on the carbon dots/Fe^（3＋） composite. The carbon dots were synthesized by an established one-pot hydrothermal method and characterized by transmission electron microscope, X-ray diffractometer, UV-Vis absorption spectrometer and fluorescence spectrophotometer. The carbon dots/Fe^（3＋） composite was obtained by aqueous mixing of carbon dots and FeCl_3, and its fluorescence property was characterized by fluorescence spectrophotometer. The fluorescence of carbon dots was quenched by aqueous Fe^（3＋） cations, resulting in the low fluorescence intensity of the carbon dots/Fe^（3＋） composite. On the other hand, H_2PO_4^- reduced the concentration of Fe^（3＋） by chemical reaction and enhanced the fluorescence of the carbon dots/Fe^（3＋） composite. The Stern-Volmer equation was introduced to describe the relation between the relative fluorescence intensity of the carbon dots/Fe^（3＋） composite and the concentration of H_2PO_4^-, and a fine linearity（R2=0.997） was found in the range of H_2PO_4^- concentration of 0.4-12 m M.展开更多
We report the fabrication and photocatalytic property of a composite of C/CaFe2O4nanorods(NRs)in an effort to reveal the influence of carbon modification.It is demonstrated that the photocatalytic degradation activity...We report the fabrication and photocatalytic property of a composite of C/CaFe2O4nanorods(NRs)in an effort to reveal the influence of carbon modification.It is demonstrated that the photocatalytic degradation activity is dependent on the mass ratio of C to CaFe2O4.The optimal carbon content is determined to be58wt%to yield a methylene blue(MB)degradation rate of0.0058min.1,which is4.8times higher than that of the pristine CaFe2O4NRs.The decoration of carbon on the surface of CaFe2O4NRs improves its adsorption capacity of the MB dye,which is specifically adsorbed on the surface as a monolayer according to the adsorption isotherm analysis.The trapping experiments of the reactive species indicate that superoxide radicals(.O2)are the main active species responsible for the removal of MB under visible‐light irradiation.Overall,the unique feature of carbon coating enables the efficient separation and transfer of photogenerated electrons and holes,strengthens the adsorption capacity of MB,and improves the light harvesting capability,hence enhancing the overall photocatalytic degradation of MB.展开更多
Carbon fiber reinforced dual-matrix composites(CHM)including carbon fiber reinforced hydroxyapatite-polymer matrix composites(CHMP)and carbon fiber reinforced hydroxyapatite-pyrolytic carbon matrix composites(CHMC)hav...Carbon fiber reinforced dual-matrix composites(CHM)including carbon fiber reinforced hydroxyapatite-polymer matrix composites(CHMP)and carbon fiber reinforced hydroxyapatite-pyrolytic carbon matrix composites(CHMC)have great potential application in the field of artificial hip joints,where a combination of high mechanical strength and excellent biotribological property are required.In this work,the graphene-silicon nitride nanowires(Graphene-Si_(3)N_(4)nws)interlocking interfacial enhancement were designed and constructed into CHM for boosting the mechanical and biotribological properties.The graphene and Si_(3)N_(4)nws interact with each other and construct interlocking interfacial enhancement.Benefiting from the Graphene-Si_(3)N_(4)nws synergistic effect and interlocking enhancement mechanism,the mechanical and biotribological properties of CHM were promoted.Compared with CHMP,the shear and compressive strengths of Graphene-Si_(3)N_(4)nws reinforced CHMP were increased by 80.0% and 61.5%,respectively.The friction coefficient and wear rate were reduced by 52.8% and 52.9%,respectively.Compared with CHMC,the shear and compressive strengths of Graphene-Si_(3)N_(4)nws reinforced CHMC were increased by 145.4% and 64.2%.The friction coefficient and wear rate were decreased by 52.3% and 73.6%.Our work provides a promising methodology for preparing Graphene-Si_(3)N_(4)nws reinforced CHM with more reliable mechanical and biotribological properties for use in artificial hip joints.展开更多
基金Funded by the National Natural Science Foundation of China(Nos.61575150 and 61377092)the Natural Science Foundation of Hubei Province(N0.2014CFB831)
文摘A novel fluorescent probe for H_2PO_4^- was designed and fabricated based on the carbon dots/Fe^（3＋） composite. The carbon dots were synthesized by an established one-pot hydrothermal method and characterized by transmission electron microscope, X-ray diffractometer, UV-Vis absorption spectrometer and fluorescence spectrophotometer. The carbon dots/Fe^（3＋） composite was obtained by aqueous mixing of carbon dots and FeCl_3, and its fluorescence property was characterized by fluorescence spectrophotometer. The fluorescence of carbon dots was quenched by aqueous Fe^（3＋） cations, resulting in the low fluorescence intensity of the carbon dots/Fe^（3＋） composite. On the other hand, H_2PO_4^- reduced the concentration of Fe^（3＋） by chemical reaction and enhanced the fluorescence of the carbon dots/Fe^（3＋） composite. The Stern-Volmer equation was introduced to describe the relation between the relative fluorescence intensity of the carbon dots/Fe^（3＋） composite and the concentration of H_2PO_4^-, and a fine linearity（R2=0.997） was found in the range of H_2PO_4^- concentration of 0.4-12 m M.
基金supported by the National Natural Science Foundation of China(21503100)Natural Science Foundation of Jiangxi Province(20161BAB213071,20151BAB213010)+1 种基金Project of Education Department of Jiangxi Province(GJJ150325)Sponsored Program for Cultivating Youths of Outstanding Ability in Jiangxi Normal University~~
文摘We report the fabrication and photocatalytic property of a composite of C/CaFe2O4nanorods(NRs)in an effort to reveal the influence of carbon modification.It is demonstrated that the photocatalytic degradation activity is dependent on the mass ratio of C to CaFe2O4.The optimal carbon content is determined to be58wt%to yield a methylene blue(MB)degradation rate of0.0058min.1,which is4.8times higher than that of the pristine CaFe2O4NRs.The decoration of carbon on the surface of CaFe2O4NRs improves its adsorption capacity of the MB dye,which is specifically adsorbed on the surface as a monolayer according to the adsorption isotherm analysis.The trapping experiments of the reactive species indicate that superoxide radicals(.O2)are the main active species responsible for the removal of MB under visible‐light irradiation.Overall,the unique feature of carbon coating enables the efficient separation and transfer of photogenerated electrons and holes,strengthens the adsorption capacity of MB,and improves the light harvesting capability,hence enhancing the overall photocatalytic degradation of MB.
基金This work was supported by the National Natural Science Foundation of China under Grant No.51872232the Key Scientific and Technological Innovation Research Team of Shaanxi Province(2022TD-31)+3 种基金the Key R&D Program of Shaanxi Province(2021ZDLGY14-04)the National Training Program of Innovation and Entrepreneurship for Undergraduates(Grand No.XN2022023)the Joint Funds of the National Natural Science Foundation of China(Grant No.U21B2067)the Research Fund of the State Key Laboratory of Solidification Processing(NWPU),China(Grant No.136-QP-2015).
文摘Carbon fiber reinforced dual-matrix composites(CHM)including carbon fiber reinforced hydroxyapatite-polymer matrix composites(CHMP)and carbon fiber reinforced hydroxyapatite-pyrolytic carbon matrix composites(CHMC)have great potential application in the field of artificial hip joints,where a combination of high mechanical strength and excellent biotribological property are required.In this work,the graphene-silicon nitride nanowires(Graphene-Si_(3)N_(4)nws)interlocking interfacial enhancement were designed and constructed into CHM for boosting the mechanical and biotribological properties.The graphene and Si_(3)N_(4)nws interact with each other and construct interlocking interfacial enhancement.Benefiting from the Graphene-Si_(3)N_(4)nws synergistic effect and interlocking enhancement mechanism,the mechanical and biotribological properties of CHM were promoted.Compared with CHMP,the shear and compressive strengths of Graphene-Si_(3)N_(4)nws reinforced CHMP were increased by 80.0% and 61.5%,respectively.The friction coefficient and wear rate were reduced by 52.8% and 52.9%,respectively.Compared with CHMC,the shear and compressive strengths of Graphene-Si_(3)N_(4)nws reinforced CHMC were increased by 145.4% and 64.2%.The friction coefficient and wear rate were decreased by 52.3% and 73.6%.Our work provides a promising methodology for preparing Graphene-Si_(3)N_(4)nws reinforced CHM with more reliable mechanical and biotribological properties for use in artificial hip joints.
文摘为了防止铁酸钴(Co Fe_(2)O_(4))纳米颗粒团聚,提高其对奥克托今(HMX)和哈托(TKX-50)的催化分解性能,采用类石墨氮化碳(g-C_(3)N_(4))作为Co Fe_(2)O_(4)纳米颗粒的分散剂载体,通过溶剂热法原位生长制备了Co Fe_(2)O_(4)/g-C_(3)N_(4)二元纳米复合材料,并利用X射线粉末衍射仪、扫描电子显微镜、傅立叶变换红外光谱仪以及差示扫描量热仪等研究了其组成、结构形貌及催化分解性能。结果表明,Co Fe_(2)O_(4)/g-C_(3)N_(4)复合材料形貌均匀密实,使HMX和TKX-50的热分解峰温分别降低了7.0℃和41.3℃,表观活化能分别降低了341.1 k J·mol^(-1)和21.0 k J·mol^(-1),同时增大了其放热量。残渣分析结果发现HMX几乎完全被催化分解,而TKX-50催化分解不彻底,其残渣和Co Fe_(2)O_(4)/g-C_(3)N_(4)形成了微米级块状混合物。
