Effect of secondary pore distribution on adsorption diffusion performance of n-hexane on 5A zeolite pellets

Adsorption rates of n-hexane on the 5A zeolite at 100 to 300 ℃ and 0.01 to 10 kPa are determined by an intelligent gravimetric analyzer （IGA-100）, and the adsorption diffusion performance of n-hexane on 5A zeolite pellets with different secondary pore distributions is analyzed. The results indicate that 5A-1 and 5A-6 zeolites have similar micropore and mesopore size distribution, while the 5A-6 zeolite has a larger secondary pore volume when the pore diameter is between 0.1 and 1 μm and more secondary pores when the pore diameter is less than 0.01 μm. The effective diffusion coefficient of nhexane on the 5A-6 zeolite pellet is 10 ^-6 to 10 4 cm^2/s, about 2 to 5 times higher than that on the 5A-1 zeolite. The effective diffusion coefficient of n-hexane on the 5A-1 zeolite pellet improves from 5 × 10^-7 to 2 × 10 6cm^2/s when the temperature increases from 100 to 300 ~C. However, the effective diffusion coefficient of n-hexane on the 5A-6 zeolite remains almost unchanged at different temperatures. The molecular average free path of n-hexane decreases from 627.15-963.28 to 0.63-0, 96 Ixm with the adsorption pressure increasing from 0.01 to 10 kPa. Such a flee path is close to the secondary pore diameter, resulting in significant Knudsen diffusion in the secondary pores. Thus, the effective diffusion coefficient of n-hexane on the 5A zeolite pellets increases before 1 kPa and decreases after 1 kPa.

Adsorption dynamics of ethane from air in structured fixed beds with different microfibrous composites

Adsorption dynamics of ethane in two granular fixed beds and structured fixed beds with microfibrous composites was studied.5A zeolite membrane 5A/PSSF(paper-like sintered stainless steel fiber)and microfibrous entrapped activated carbon(MEAC)composites were prepared by wet layup papermaking/sintering technique and in-situ hydrothermal method.Microfibrous composites were characterized by X-ray diffraction,scanning electron microscopy and N2 adsorption/desorption.Structured fixed beds were designed by filling granular adsorbents(5A zeolite or activated carbon)and microfibrous composites at the inlet and outlet of the beds,respectively.Effects of flow rate,bed height and structure on the breakthrough curves were investigated.The length of unused bed(LUB)was determined,and Yoon–Nelson model was used to fit the breakthrough curves.The experimental results showed ethane was effectively adsorbed on the granular adsorbents and microfibrous composites.Both composites could decrease the LUB values and enhance bed utilization.All breakthrough curves fitted well to Yoon–Nelson model,with correlation coefficient exceeding 0.89.The adsorption rate of ethane could be improved in the structured fixed beds,which showed an enhanced mass transfer efficiency for ethane adsorption.LUB values of structured fixed beds with 5A/PSSF composites were larger,the bed utilization values were lower,and the adsorption rate constants were higher than those with MEAC composites under the same conditions.