In this study, we focus on the dynamic failure property of A6N01S-T5 aluminum alloyusing for high-speed train. The method of SHBT+3D DIC was put forward to figure out the dynamic mechanical properties and dynamic fail...In this study, we focus on the dynamic failure property of A6N01S-T5 aluminum alloyusing for high-speed train. The method of SHBT+3D DIC was put forward to figure out the dynamic mechanical properties and dynamic failure strain of A6N01S-T5 aluminum alloy,and on the basis of this, Johnson-Cook model constitutive parameters and dynamic failure strain parameters were obtained through a series of static and dynamic tests.An important character of this methodwas that the sandwich structure from the true high-speed train was used in penetration test,followed by the numerical calculation of the same working condition using LS-DYNA.Then we compare the experimental results with simulation results mentioned above in terms of failure morphology in structure and the bullet speed throughout the entire process to verifythe accuracyof the parameter. The experimental results provide a data basis for the crash simulation model of high-speed trains,in turn to optimize the structural design and whole efficiency.展开更多
In this study, the in-situ synthesized ZrB_(2) nanoparticles and rare earth Sc were introduced to enhance the strength and ductility of 7N01 aluminum alloy, via the generation of high-melting and uniform nanodispersoi...In this study, the in-situ synthesized ZrB_(2) nanoparticles and rare earth Sc were introduced to enhance the strength and ductility of 7N01 aluminum alloy, via the generation of high-melting and uniform nanodispersoids. The microstructure and mechanical property evolution of the prepared composites and the interaction between ZrB_(2) and Sc were studied in detail. The microstructure investigation shows that the introduction of rare earth scandium(Sc) can promote the distribution of ZrB_(2) nanoparticles, by improving their wettability to the Al melt. Meanwhile, the addition of rare earth Sc also modifies the coarse Al Zn Mg Mn Fe precipitated phases, refines the matrix grains and generates high-melting Al_3(Sc,Zr)/Al_3Sc nanodispersoids. Tensile tests of the composites show that with the combinatorial introduction of ZrB_(2) and Sc, the strength and ductility of the composites are improved simultaneously compared with the corresponding 7N01 alloy, ZrB_(2) /7N01 composite and Sc/7N01 alloy. And the optimum contents of ZrB_(2) and Sc are 3 wt% and 0.2 wt% in this study. The yield strength, ultimate strength and elongation of(3 wt% ZrB_(2) +0.2 wt% Sc)/7N01 composite are 477 MPa, 506 MPa and 9.8%, increased about 18.1%, 12.2%and 38% compared to 7N01 alloy. Furthermore, the cooperation strengthening mechanisms of ZrB_(2) and Sc are also discussed.展开更多
文摘In this study, we focus on the dynamic failure property of A6N01S-T5 aluminum alloyusing for high-speed train. The method of SHBT+3D DIC was put forward to figure out the dynamic mechanical properties and dynamic failure strain of A6N01S-T5 aluminum alloy,and on the basis of this, Johnson-Cook model constitutive parameters and dynamic failure strain parameters were obtained through a series of static and dynamic tests.An important character of this methodwas that the sandwich structure from the true high-speed train was used in penetration test,followed by the numerical calculation of the same working condition using LS-DYNA.Then we compare the experimental results with simulation results mentioned above in terms of failure morphology in structure and the bullet speed throughout the entire process to verifythe accuracyof the parameter. The experimental results provide a data basis for the crash simulation model of high-speed trains,in turn to optimize the structural design and whole efficiency.
基金Project supported by the National Natural Science Foundation of China(U20A20274,52071158,51701085,U1664254)the Six Talents Peak Project of Jiangsu Province(2018-XCL-202)+1 种基金the Open Funds of SKLMMC of SJTU(MMC-KF18-16)the Jiangsu Province Key Laboratory of High-end Structural Materials(HSM1803,1902)。
文摘In this study, the in-situ synthesized ZrB_(2) nanoparticles and rare earth Sc were introduced to enhance the strength and ductility of 7N01 aluminum alloy, via the generation of high-melting and uniform nanodispersoids. The microstructure and mechanical property evolution of the prepared composites and the interaction between ZrB_(2) and Sc were studied in detail. The microstructure investigation shows that the introduction of rare earth scandium(Sc) can promote the distribution of ZrB_(2) nanoparticles, by improving their wettability to the Al melt. Meanwhile, the addition of rare earth Sc also modifies the coarse Al Zn Mg Mn Fe precipitated phases, refines the matrix grains and generates high-melting Al_3(Sc,Zr)/Al_3Sc nanodispersoids. Tensile tests of the composites show that with the combinatorial introduction of ZrB_(2) and Sc, the strength and ductility of the composites are improved simultaneously compared with the corresponding 7N01 alloy, ZrB_(2) /7N01 composite and Sc/7N01 alloy. And the optimum contents of ZrB_(2) and Sc are 3 wt% and 0.2 wt% in this study. The yield strength, ultimate strength and elongation of(3 wt% ZrB_(2) +0.2 wt% Sc)/7N01 composite are 477 MPa, 506 MPa and 9.8%, increased about 18.1%, 12.2%and 38% compared to 7N01 alloy. Furthermore, the cooperation strengthening mechanisms of ZrB_(2) and Sc are also discussed.
