The distributions of traps and electron density in the interfaces between polyimide (PI) matrix and Al2O3 nanoparticles are researched using the isothermal decay current and the small-angle x-ray scattering (SAXS)...The distributions of traps and electron density in the interfaces between polyimide (PI) matrix and Al2O3 nanoparticles are researched using the isothermal decay current and the small-angle x-ray scattering (SAXS) tests. According to the electron density distribution for quasi two-phase mixture doped by spherical nanoparticles, the electron densities in the interfaces of PI/Al2O3 nanocomposite films are evaluated. The trap level density and carrier mobility in the interface are studied. The experimental results show that the distribution and the change rate of the electron density in the three layers of interface are different, indicating different trap distributions in the interface layers. There is a maximum trap level density in the second layer, where the maximum trap level density for the nanocomposite film doped by 25 wt% is 1.054 × 10^22 eV·m^-3 at 1.324eV, resulting in the carrier mobility reducing. In addition, both the thickness and the electron density of the nanocomposite film interface increase with the addition of the doped Al2O3 contents. Through the study on the trap level distribution in the interface, it is possible to further analyze the insulation mechanism and to improve the performance of nano-dielectric materials.展开更多
The chemical structures, optical properties and laser-induced damage thresholds of magnesium fluoride films annealed at different temperatures were investigated. The results showed that the stoichiometry of MgF2 film ...The chemical structures, optical properties and laser-induced damage thresholds of magnesium fluoride films annealed at different temperatures were investigated. The results showed that the stoichiometry of MgF2 film changed a little with the increase in annealing temperature. Analysis of the optical properties indicated that excellent antireflection behavior of the film in the range of 200-400 nm can be obtained by the samples coated with MgF2 film. The refractive index increased and the extinction coefficient decreased with increasing annealing temperature. Compared with the asdeposited films, the laser-induced damage threshold was improved after annealing process and decreased with the increase in annealing temperature, which was probably due to the denser film and more absorption centers under higher annealing temperature.展开更多
Conventional porous MgF2 antireflective films show poor environmental durability due to its hydrophilic nature.To improve the film environmental durability,hydrophobic porous MgF2 antireflective films are prepared by ...Conventional porous MgF2 antireflective films show poor environmental durability due to its hydrophilic nature.To improve the film environmental durability,hydrophobic porous MgF2 antireflective films are prepared by a methyl silicone-modified MgF2 sol.Effects of the methyl silicone proportions on the film properties are examined in order to control the wettability,peak transmittance,and environmental durability of the films.The modification of methyl silicone can increase the film hydrophobicity,thus decreases the adsorption of water,and improves the environmental durability.However,large amounts of methyl silicone could increase the film refractive index,resulting in the decrease in peak transmittance for films on BK7 glass.Films with 40% silicone show water contact angle of 110°,peak transmittance of 98.7%,and good environmental durability.The results of accelerated test show that the environmental durability of the porous MgF2 films modified with 40% methyl silicone is six times higher than that of the conventional films.展开更多
基金Supported by the National Natural Science Foundation of China under Grant Nos 51337002,51077028,51502063 and 51307046the Foundation of Harbin Science and Technology Bureau of Heilongjiang Province under Grant No RC2014QN017034
文摘The distributions of traps and electron density in the interfaces between polyimide (PI) matrix and Al2O3 nanoparticles are researched using the isothermal decay current and the small-angle x-ray scattering (SAXS) tests. According to the electron density distribution for quasi two-phase mixture doped by spherical nanoparticles, the electron densities in the interfaces of PI/Al2O3 nanocomposite films are evaluated. The trap level density and carrier mobility in the interface are studied. The experimental results show that the distribution and the change rate of the electron density in the three layers of interface are different, indicating different trap distributions in the interface layers. There is a maximum trap level density in the second layer, where the maximum trap level density for the nanocomposite film doped by 25 wt% is 1.054 × 10^22 eV·m^-3 at 1.324eV, resulting in the carrier mobility reducing. In addition, both the thickness and the electron density of the nanocomposite film interface increase with the addition of the doped Al2O3 contents. Through the study on the trap level distribution in the interface, it is possible to further analyze the insulation mechanism and to improve the performance of nano-dielectric materials.
基金financially supported by the Research Fund of the State Key Laboratory of Solidification Processing,Northwestern Polytechnical University,China(Grant No.155-QP-2016)the Fundamental Research Funds for the Central Universities(No.3102014JCQ01032)the 111 Project(No.B08040)
文摘The chemical structures, optical properties and laser-induced damage thresholds of magnesium fluoride films annealed at different temperatures were investigated. The results showed that the stoichiometry of MgF2 film changed a little with the increase in annealing temperature. Analysis of the optical properties indicated that excellent antireflection behavior of the film in the range of 200-400 nm can be obtained by the samples coated with MgF2 film. The refractive index increased and the extinction coefficient decreased with increasing annealing temperature. Compared with the asdeposited films, the laser-induced damage threshold was improved after annealing process and decreased with the increase in annealing temperature, which was probably due to the denser film and more absorption centers under higher annealing temperature.
文摘Conventional porous MgF2 antireflective films show poor environmental durability due to its hydrophilic nature.To improve the film environmental durability,hydrophobic porous MgF2 antireflective films are prepared by a methyl silicone-modified MgF2 sol.Effects of the methyl silicone proportions on the film properties are examined in order to control the wettability,peak transmittance,and environmental durability of the films.The modification of methyl silicone can increase the film hydrophobicity,thus decreases the adsorption of water,and improves the environmental durability.However,large amounts of methyl silicone could increase the film refractive index,resulting in the decrease in peak transmittance for films on BK7 glass.Films with 40% silicone show water contact angle of 110°,peak transmittance of 98.7%,and good environmental durability.The results of accelerated test show that the environmental durability of the porous MgF2 films modified with 40% methyl silicone is six times higher than that of the conventional films.