A research on statistical retrieval algorithms and spectral characteristics of the total absorption coefficients in the Yellow Sea and the East China Sea

This paper suggests a group of statistical algorithms for calculating the total absorption coefficients based on in situ data of apparent optical property and inherent optical property collected with strict quality assurance according to NASA ocean bio-optic protocols in the Yellow Sea and the East China Sea in spring 2003. The band-ratios ofRrs412/Rrs555, Rrs49o/Rrs555 are used in the algorithms to derive the total absorption coefficients （at） at 412, 440, 488, 510, 532 and 555nm bands, respectively. The average relative errors between inversed and measured values are less than 25.8%, with the correlative coefficients （R2） being 0.75-0.85. Error sensitivity analysis shows that the maximum retrieval error is less than 24.0% at ＋5% error in Rrs＇s. So the statistical algorithms of this paper are practicable. In this paper, the relations between the total absorption coefficients at 412, 488, 510, 532, 555 nm and that of 440nm are also studied. The results show that the relations between the total absorption coefficients of 400-600 nm and that of 440 nm are correlated well and all of their correlative coefficients R2 are greater than 0.99. Furthermore, a regression analysis is also done for the slope of the linear relations and wavelengths, and the R2 is also 0.99. Thus it is possible to retrieve other bands＇ total absorption coefficients with only one band absorption value, which significantly reduce the number of unknown parameters in studying other ocean color related problems.

The proportions and variations of the light absorption coefficients of major ocean color components in the East China Sea

The East China Sea （ECS）, one of the largest continental seas, has dynamic hydrology and complex optical characteristics that make ocean color remote-sensing retrieval difficult. The distributions and proportions of the light absorption coefficients of major ocean color components based on two large-scale investigations in the ECS are presented, showing these features in typical summer and winter seasons. The absorption coefficient aCDOM, aNAp and aphy of colored dissolved organic matter, non-algal particle, and pigment of phytoplankton show a decreasing trend from the coast to the outer shelf. According to the aeDOM distribution at 440 nm, the Changjiang River plume shows an abnormal southeastward transport. An extremely high aNaP value patch at 440 nm is present in the middle coast. The chlorophyll-a-specific phytoplankton pigment absorption （a^hy） is much higher in winter than in summer, which may cause serious underestimated results when applying the averaged aphy into remote-sensing algorithms for chlorophyll concentration retrieval. The importance of phytoplankton size was evident in outer shelf waters. The absorption of aCDOM （440） is a dominant component accounting for over half of the total seawater absorption in summer. The aNAP（440） accounts for 64% of the absorption of the ECS coastal area in winter.

A preliminary study of the variation of phytoplankton absorption coefficients in the northern South China Sea

The temporal and spatial variabilities of phytoplankton absorption coefficients （a ph （λ）） and their relationships with physical processes in the northern South China Sea were examined, based on in situ data collected from two cruise surveys during May 14 to 25, 2001 and November 2 to 21, 2002. Significant changes in the surface water in a ph values and B/R ratios （a ph （440）/a ph （675）） were observed in May, which were caused by a phytoplankton bloom on the inner shelf stimulated by a large river plume due to heavy precipitation. This is consistent with the observed one order of magnitude elevation of chlorophyll a and a shift from a pico/nano dominated phytoplankton community to one dominated by micro-algae. Enhanced vertical mixing due to strengthened northeast monsoon in November has been observed to result in higher surface a ph （675） （0.002–0.006 m-1 higher） and less pronounced subsurface maximum on the outer shelf/slope in November as compared with that in May. Measurements of a ph and B/R ratios from three transects in November revealed a highest surface a ph （675） immediately outside the mouth of the Zhujiang （Pearl） River Estuary, whereas lower a ph （675） and higher B/R ratios were featured in the outer shelf/slope waters, demonstrating the respective influence of the Zhujiang River plume and the oligotrophic water of the South China Sea. The difference in spectral shapes of phytoplankton absorption （measured by B/R ratios and bathochromic shifts） on these three transects infers that picoprocaryotes are the major component of the phytoplankton community on the outer shelf/slope rather than on the inner shelf. A regional tuning of the phytoplankton absorption spectral model （Carder et al., 1999） was attempted, demonstrating a greater spatial variation than temporal variation in the lead parameter a 0 （λ）. It was thus implicated that region-based parameterization of ocean color remote sensing algorithms in the northern South China Sea was mandatory.

Multi-wavelength measurements of aerosol optical absorption coefficients using a photoacoustic spectrometer

The atmospheric aerosol absorption capacity is a critical parameter determining its direct and indirect effects on cli- mate. Accurate measurement is highly desired for the study of the radiative budget of the Earth. A multi-wavelength （405 rim, 532 nm, 780 nm） aerosol absorption meter based on photoacoustic spectroscopy （PAS） invovling a single cylin- drical acoustic resonator is developed for measuring the aerosol optical absorption coefficients （OACs）. A sensitivity of 1.3 Mm-l （at 532 nm） is demonstrated. The aerosol absorption meter is successfully tested through measuring the OACs of atmospheric nigrosin and ambient aerosols in the suburbs of Hefei city. The absorption cross section and absorption Angstrom exponent （AAE） for ambient aerosol are determined for characterizing the component of the ambient aerosol.

Study on absorption coefficients of dual-energy γ-rays in determining phase fractions of multiphase flows

This paper discusses the principle and mathematical method to measure the phase fractions of multiphase flows by using a dual-energy gamma-ray system. The dual-energy gamma-ray device is composed of radioactive isotopes of 241Am and 137Cs with emission energies of 59.5 keV and 662 keV respectively. A rational method to calibrate the absorption coefficient was introduced in detail. The statistical error has been analyzed on the basis of the accurate absorption coefficient which enables determination phrase fractions almost independent of the flow regime. Improvement has been achieved on the measurement accuracy of phase fractions.

Calculations of narrow-band transimissities and the Planck mean absorption coefficients of real gases using line-by-line and statistical narrow-band models

Narrow-band transmissivities in the spectral range of 150 to 9300 cml and at a uniform resolution of 25 cm-1 were calculated using the statistical narrow-band （SNB） model with the band parameters of Soufiani and Taine, the more recent parameters of Andr6 and Vaillon, and the line-by-line （LBL） method along with the HITEMP-2010 spectroscopic database. Calculations of narrow-band transmissivity were conducted for gas columns of different lengths and containing different isothermal and non-isothermal CO2-H20-N2 mixtures at 1 atm. Narrow-band transmissivities calculated by the SNB model are in large relative error at many bands. The more recent SNB model parameters of Andr6 and Vaillon are more accurate than the earlier parameters of Soufiani and Taine. The Planck mean absorption coefficients of CO2, H20, CO, and CH4 in the temperature range of 300 to 2500K were calculated using the LBL method and different versions of the high resolution transmission （HITRAN） and high-temperature spectroscopic absorption parameters （HITEMP） spectroscopic databases. The SNB model was also used to calculate the Planck mean absorption coefficients of these four radiating gases. The LBL results of the Planck mean absorption coefficient were compared with the classical results of Tien and those from the SNB model.

Recovery of carbon monoxide from flue gases by reactive absorption in ionic liquid imidazolium chlorocuprate(I): Mass transfer coefficients

Recovery of carbon monoxide from flue gases by selective absorption of carbon monoxide in an imidazolium chlorocuprate（l） ionic liquid is considered in this work as an alternative to the use of molecular volatile solvents such as aromatic hydrocarbons. The present work evaluates the CO mass transfer rates from the gas phase to the ionic liquid solutions in the absence of chemical reaction. To that end, carbon dioxide was employed as an inert model gas and absorption experiments were performed to assess the influence of different process variables in a batch reactor with fiat gas-liquid interface. The experimental mass transfer coefficients showed significant var- iation with temperature, （3.4-10.9） × 10^-7 m·s^-1 between 293 and 313 K; stirring speed, （10.2- 33.1）× 10^-7 m.s 1 between 100 and 300 r·min^-1; and concentration of copper（1）, （6.6-10.2） × 10^-7 m·s^-1 between 0.25 and 2 mol· L^- 1. In addition, the mass transfer coefficients were eventually found to follow a poten- tial proportionality of the type kL ∝μ^-0.5 and the dimensionless correlation that makes the estimation of the mass transfer coefficients possible in the studied range of process variables was obtained： Sh=10^-2.64 Re^1.07 , Sc^0.75,These results constitute the first step in the kinetic analysis of the reaction between CO and imidazolium chlorocuprate（I） ionic liquid that determines the design of the separation units.

Sound absorption property of wood for five eucalypt species

The sound absorption coefficients of wood and wood boards for five eucalypt species (Eucalyptus urophylla, Euca-lyptus urophylla E. grandis, Eucalyptus urophylla E. tereticornis, Eucalyptus urophylla E. camaldulensis and Eucalyptus cloeziana) that were collected from plantation in Dongmen Forestry Center of Guangxi Province, China were tested with stand-ing wave method and their sound absorption properties were also compared. The results showed that the sound absorption co-efficients of the five eucalypt wood species did not change evidently below 1000 Hz, but above 1000 Hz their sound absorption coefficients increased with the increasing frequency. The difference in sound absorption coefficient among five species of eucalypt wood is not evident at the tested frequency range (200-2000 Hz), but the sound absorption property of Eucalyptus urophylla at low frequency is better than that of other four species. The sound absorption coefficient of the tangential-sawn board is higher than that of the radial-sawn board. The sound absorption property of eucalypt wood of 0.5 cm in thickness is much better than that of 1.0 cm in thickness. It is concluded that wood sound absorption properties of eucalypts are affected by their board thickness and the type of sawn timber within the testing frequency, but the variance of wood sound absorption property among the five tested species is not significant.

Phytoplankton size class derived from phytoplankton absorption and chlorophyll-a concentrations in the northern South China Sea

A previously developed model was modified to derive three phytoplankton size classes (micro-, nano-, and pico-phytoplankton) from the overall chlorophyll-a concentration, assuming that each class has a specific absorption coefficient. The modified model performed well using in-situ data from the northern South China Sea, and the results were reliable and accurate. The relative errors of the size-fractioned chlorophyll-a concentration for each size class were: micro-:21%, nano-:41%, pico-:26%, and nano+pico:23%. The model was then applied on ocean color remote sensing data to examine the distribution and variation of phytoplankton size classes in northern South China Sea on a large scale.

A bio-optical inversion model to retrieve absorption contributions and phytoplankton size structure from total minus water spectral absorption using genetic algorithm

We propose a bio-optical inversion model that retrieves the absorption contributions of phytoplankton and colored detrital matter(CDM),as well as the phytoplankton size classes(PSCs),from total minus water absorption spectra.The model is based on three-component separation of phytoplankton size structure and a genetic algorithm.The model performance was tested on two independent datasets(the NASA bio-Optical Marine Algorithm Dataset(NOMAD) and the northern South China Sea(NSCS) dataset).The relationships between the estimated and measured values were strongly linear,especially for aCDM(412),and the Root Mean Square Error(RMSE) of the CDM exponential slope(SCDM) was relatively low.Next,the inversion model was directly applied to in-situ total minus water absorption spectra determined by an underwater meter during a cruise in September 2008,to retrieve the phytoplankton size structure in the seawater.By comparing the measured and retrieved chlorophyll a concentrations,we demonstrated that total and size-specific chlorophyll a concentrations could be retrieved by the model with relatively high accuracy.Finally,we applied the bio-optical inversion model to investigate changes in phytoplankton size structure induced by an anti-cyclonic eddy in the NSCS.

Sound absorption property of open-pore aluminum foams

This paper presents a study on sound absorption property of aluminum foam by evaluating its sound absorption coefficients using standing wave tube method. Experimental results showed that the average values of sound absorption coefficients (over the test frequency range) are all above 0.4, which indicate very good sound absorption property of the aluminum foams. The sound absorption coefficient is affected by frequency and pore structure, and reaches its maximum value at around 1 000 Hz. With the increase of porosity and decrease of cell diameter, the sound absorption coefficient values increase.

Effect of size and indium-composition on linear and nonlinear optical absorption of InGaN/GaN lens-shaped quantum dot

Based on the Schr ¨odinger equation for envelope function in the effective mass approximation, linear and nonlinear optical absorption coefficients in a multi-subband lens quantum dot are investigated. The effects of quantum dot size on the interband and intraband transitions energy are also analyzed. The finite element method is used to calculate the eigenvalues and eigenfunctions. Strain and In-mole-fraction effects are also studied, and the results reveal that with the decrease of the In-mole fraction, the amplitudes of linear and nonlinear absorption coefficients increase. The present computed results show that the absorption coefficients of transitions between the first excited states are stronger than those of the ground states. In addition, it has been found that the quantum dot size affects the amplitudes and peak positions of linear and nonlinear absorption coefficients while the incident optical intensity strongly affects the nonlinear absorption coefficients.

Variability of phytoplankton absorption in the northern South China Sea:influence of the size structure and pigment composition of algal populations

Data from three cruises conducted in the Zhujiang River （ZR）, coastal waters of Guangdong （CWGD） and the northern South China Sea （NSCS） during 2003 and 2004 were examined for assessing the relative importance of pigment composition and packaging effect in modifying the specific absorption coefficients of phytoplankton. The three survey regions differ widely in their phytoplankton community with large cells dominating the ZR and CWGD waters and small cells dominating the NSCS region. Variations in the size structure and the accessory pigments have much effect on the chlorophyll a-specific absorption coefficient of phytoplankton. The size index accounted for about 42% and 33% of the variation of the specific absorption coefficient at 440 and 675 nm, respectively. Using the multiple regression analysis approach, pigment concentrations for each sample were calculated. The accessory pigments other than chlorophyll a contribute to absorption mainly in the blue - to - green region of the spectrum and their absorptions account for about 44%, 43% and 53% on the average of the total phytoplankton absorption at 440 nm for the ZR, CWGD and NSCS regions. Among the accessory pigments, the photosynthetic carotenoids （noted PSC） play a dominant role in the ZR and CWGD waters, while in the NSCS the nonphotosynthetic carotenoids （noted PPG） as well as PSC have important contributions. Because the variations of both the size structure and accessory pigments in algal populations contributed to the variability of the specific absorption coefficient in the study regions, these factors may be considered explicitly in future bio - optical algorithms to derive chlorophyll a concentration more accurately.

A new algorithm of retrieving a petroleum substances absorption coefficient in sea water based on a remote sensing image

Establishing the remote sensing algorithm of retrieving the absorption coefficient of seawater petroleum substances is an efficient way to improve the accuracy of retrieving a seawater petroleum concentration using a remote sensing technology. A remote sensing reflectance is a basic physical parameter in water color remote sensing. Apply it to directly retrieve the absorption coefficient of seawater petroleum substances is of potential advantage. The absorption coefficient of waters containing petroleum [ACWCP, a_o（λ）], consists of the absorption coefficient of pure water [ACPW, a_w（λ）], plankton [ACP, a_（ph）（λ）], colored scraps [ACCS, a_（d,g）（λ）], and petroleum substance [ACPS, a_（oil）（λ）]. Among those, ACCS consists of the absorption coefficient of nonalgal particle [ACNP, a_d（λ）] and colored dissolved organic matter [ACCDOM, a_g（λ）]. For waters containing petroleum, the retrieved ACCS using the existing method is a combination absorption coefficient of ACNP,ACCDOM and ACPA [CAC, a_（d,g,oil）（λ）]. Therefore, the principle question is how to extract ACPS from CAC.Through the analysis of the three proportion tests conducted between the year of 2013 and 2015 and the corresponding remote sensing data, an algorithm of retrieving the absorption coefficient of petroleum substances is proposed based on remote sensing reflectance. First of all, ACPS and CAC are retrieved from the reflectance using the quasi-analytical algorithm（QAA）, with some parameter modified. Secondly, given the fact that the backscatter coefficient [BC, b_（bp）（555）] of total particles at 555 nm can be obtained completely from the reflectance, the relation between BC and ACNP in petroleum contaminated water can be established. As a result, ACNP can be calculated. Then, combining the remote sensing retrieving algorithm of a_g（440）, the method of achieving the spectral slope of the absorption coefficient can be established, from which ACCDOM,can be calculated. Finally, ACPS can be computed as the residual. The accuracy of ACPS based on this algorithm is 86% compared with the in situ measurements.

Development of a High Sound Absorption Material CEMCOM

Based on sound absorption mechanism of material,the special sound absorption material CEMCOM for road sound insulation is introduced.This high sound absorption material is mainly composed of expanded perlite.Using multiple sound absorption structure can improve sound absorption property of material.According to the preparation principle and durability design of material,a new kind of material with low cost and high durability is developed.

Studies on Linear and Nonlinear Intersubband Optical Absorptions in a Wurtzite AlGaN/GaN Coupling Quantum Well

Based on the density matrix approach and iterative procedure, a detailed procedure for the calculation of the linear and nonlinear intersubband optical absorption coefficients is given in wurtzite GaN-based coupling quantum wells （CQWs）. The simple analytical formulas for electronic eigenstates and the linear and nonlinear optical absorption coefficients in the systems are also deduced. Numerical result on a typical A1GaN/GaN CQW shows that, the linear and nonlinear optical absorption coefficients sensitively depend on the structural parameters of the CQW system as well as the incident optics beam intensity.

The absorption of water color components and spectral modes in the Pearl River estuary

In-situ data from cruises in the Pearl River estuary and adjacent marine areas were collected during March to May 2001. The absorption coefficients of the water color components were studied in detail containing total suspended matter （TSM）, chlorophyll-a （chl-a）, colored dissolved organic matter （CDOM）, and de-pigment particles. For absorption coefficient of TSM, ap, and that of de-pigment particles, ad, correlations of ap（440）-TSM, ad（440）-TSM, ap（440）-chl-a and ad-chl-a were done （the italicized term means the concentration）. There was a good correlation between ap（440） and chl-a concentration. An empirical relationship model between aph（675） and chl-a was developed showing a strong correlation of 0.93. Based on the two models the chl-a and aph（2） were correlated. The values of calculated empirical spectral slope for CDOM absorption coefficients and that of de-pigment particles, 0.017 0 and 0.011 6 respectively, both are within a relative standard error of 10.0%.

Active Absorption of Perforated Plate Based on Airflow

The theory of active absorption of the perforated plate is proposed in this paper.The perforated plate is used as the material of active absorption and the depth of the cavity behind the perforated plate is changed according to the resonant frequency of the perforated plate.The rigid wall is moved to produce resonance so that the absorption coefficient can reach the maximal level.It is shown from the numerical calculation that when the perforated plate resonates,the moving distance is large at low frequencies,and the absorption coefficient is low under certain conditions.Perforated plate resonance is effective for single frequency of incident sound wave,which is difficult for the wide frequency,so active absorption based on airflow is posed,and the numerical calculation and experiment are carried out.The results denote that this method of active absorption is practical.

Remote sensing retrieval of total absorption coefficient in the Bohai Sea

Temporal and spatial patterns of inherent optical properties in the Bohai Sea are very complex. In this paper, we used 77 groups of field data of AOPs （apparent optical properties） and IOPs （inherent optical properties） collected in June, August, and September of 2005 in the Bohai Sea, to retrieve the spectral total absorption coefficient a（2） with the quasi-analytical algorithm （QAA）. For QAA implementation, different bands in the region 680-730 nm （in 5 nm intervals） were selected and compared, to determine the optimal band domain of the reference wavelength. On this basis, we proposed a new algorithm （QAA-Com）, a combination of QAA-685 and QAA-715, according to turbidity characterized by a（440）. The percentage difference of model retrievals in the visible domain was between 4.5%-45.1%, in average of 18.8% for a（2）. The QAA model was then applied to Medium Resolution Imaging Spectrometer （MERIS） radiometric products, which were temporally and spatially matched with in-situ optical measurements. Differences between MERIS retrievals and in-situ values were in the range 9.2%-27.8% for a（2） in the visible domain. Major errors in satellite retrieval are attributable to uncertainties of QAA model parameters and in-situ measurements, as well as imperfect atmospheric correction of MERIS data by the European Space Agency （ESA）. During a storm surge in April 2009, time series of MERIS images together with the QAA model were used to analyze spatial and temporal variability of the total absorption coefficient pattern in the Bohai Sea. It is necessary to collect more independent field data to improve this algorithm.

Intersubband absorption with difference-frequency generation in GaAs asymmetric quantum wells

An asymmetric quantum well （AQW） is designed to emit terahertz （THz） waves by using difference frequency generation （DFG） with the structure of GaAs/Al0.2Ga0.8As/Al0.5Ga0.sAs. The characteristics of absorption coefficients are analysed under the parabolic and non-parabolic energy-band conditions in detail. We find that the absorption coefficients vary with the two pump optical intensities, and they reach the maxima when the pump wavelengths are given as λp1 = 9.70 μm and λp2 = 10.64 μm, respectively. Compared with non-parabolic conditions, the total absorption coefficient under parabolic conditions shows a blue shift, which is due to the increase in the energy difference between the ground and excited states. By adjusting the two pump optical intensities, the wave vector phase-matching condition inside the AQW is satisfied.