The acetalization of a series of carbonyl compounds with ethanediolwas performed over two self-steaxned HY zeolle catalpsts' The acetal and ketaiproducts were obtained with high ytelds Espectw, the HY zeollte with...The acetalization of a series of carbonyl compounds with ethanediolwas performed over two self-steaxned HY zeolle catalpsts' The acetal and ketaiproducts were obtained with high ytelds Espectw, the HY zeollte with highfraxnework Si/A1 ratio was proven to be suitable cataipst for the acetabotion ofunsaturated carbonyl compounds, during which the C =C double bond was notperturbed展开更多
Acetalizatioin on the blend fibers of poly(vinyl alcohol) (PVA) and soybean protein (SP) was studied by using dialdehydes as cross-linking agents. The optimal acetalization conditions were determined by Latin square e...Acetalizatioin on the blend fibers of poly(vinyl alcohol) (PVA) and soybean protein (SP) was studied by using dialdehydes as cross-linking agents. The optimal acetalization conditions were determined by Latin square experiment, where the modified fibers with good mechanical properties can be achieved by treating in 41 g/L dialdehyde solution at 67 ℃ for 9 min. The cross-linking reactions of PVA and SP with dialdehydes were confirmed by Fourier transform infrared (FTIR) spectroscopy. Tensile test and boiling water shrinkage measurements showed that the physical properties of PVA/SP fibers crosslinked by dialdehydes were improved comparing with those formalized fibers.展开更多
Catalytic oxidation is widely used in pollution control technology to remove volatile organic compounds. In this study, Pd/ZSM-5 catalysts with different Pd contents and acidic sites were prepared via the impregnation...Catalytic oxidation is widely used in pollution control technology to remove volatile organic compounds. In this study, Pd/ZSM-5 catalysts with different Pd contents and acidic sites were prepared via the impregnation method. All the catalysts were characterized by means of N2 adsorption- desorption, X-ray fluorescence （XRF）, HE temperature programmed reduction （H2-TPR）, and NH3 temperature programmed desorption （NH3-TPD）. Their catalytic performance was investigated in the oxidation of butyl acetate experiments. The by-products of the reaction were collected in thermal desorption tubes and identified by gas chromatography/mass spectrometry. It was found that the increase of Pd content slightly changed the catalytic activity of butyl acetate oxidation according to the yield of CO2 achieved at 90%, but decreased the cracking by-products, whereas the enhancement of strong acidity over Pd-based catalysts enriched the by-product species. The butyl acetate oxidation process involves a series of reaction steps including protolysis, dehydrogenation, dehydration, cracking, and isomerization. Generally, butyl acetate was cracked to acetic acid and 2- methylpropene and the latter was an intermediate of the other by-products, and the oxidation routes of typical by-products were proposed. Trace amounts of 3-methylpentane, hexane, 2-methylpentane, pentane, and 2-methylbutane originated from iso4merization and protolysis reactions.展开更多
文摘The acetalization of a series of carbonyl compounds with ethanediolwas performed over two self-steaxned HY zeolle catalpsts' The acetal and ketaiproducts were obtained with high ytelds Espectw, the HY zeollte with highfraxnework Si/A1 ratio was proven to be suitable cataipst for the acetabotion ofunsaturated carbonyl compounds, during which the C =C double bond was notperturbed
文摘Acetalizatioin on the blend fibers of poly(vinyl alcohol) (PVA) and soybean protein (SP) was studied by using dialdehydes as cross-linking agents. The optimal acetalization conditions were determined by Latin square experiment, where the modified fibers with good mechanical properties can be achieved by treating in 41 g/L dialdehyde solution at 67 ℃ for 9 min. The cross-linking reactions of PVA and SP with dialdehydes were confirmed by Fourier transform infrared (FTIR) spectroscopy. Tensile test and boiling water shrinkage measurements showed that the physical properties of PVA/SP fibers crosslinked by dialdehydes were improved comparing with those formalized fibers.
基金supported by the National High Technology Research and Development Program of China(No.2012AA063101)the National Basic Research Program of China(No.2010CB732300)the"Strategic Priority Research Program"of the Chinese Academy of Sciences(No.XDB05050200)
文摘Catalytic oxidation is widely used in pollution control technology to remove volatile organic compounds. In this study, Pd/ZSM-5 catalysts with different Pd contents and acidic sites were prepared via the impregnation method. All the catalysts were characterized by means of N2 adsorption- desorption, X-ray fluorescence （XRF）, HE temperature programmed reduction （H2-TPR）, and NH3 temperature programmed desorption （NH3-TPD）. Their catalytic performance was investigated in the oxidation of butyl acetate experiments. The by-products of the reaction were collected in thermal desorption tubes and identified by gas chromatography/mass spectrometry. It was found that the increase of Pd content slightly changed the catalytic activity of butyl acetate oxidation according to the yield of CO2 achieved at 90%, but decreased the cracking by-products, whereas the enhancement of strong acidity over Pd-based catalysts enriched the by-product species. The butyl acetate oxidation process involves a series of reaction steps including protolysis, dehydrogenation, dehydration, cracking, and isomerization. Generally, butyl acetate was cracked to acetic acid and 2- methylpropene and the latter was an intermediate of the other by-products, and the oxidation routes of typical by-products were proposed. Trace amounts of 3-methylpentane, hexane, 2-methylpentane, pentane, and 2-methylbutane originated from iso4merization and protolysis reactions.
