Synthesis of high-capacity LiNi_(0.8)Co_(0.1)Mn_(0.1)O_2 cathode by transition metal acetates

LiNi0.8Co0.1Mn0.1O2 cathode was synthesized using transition metal acetates under different synthesis conditions. Simultaneous thermogravimetric–differential scanning calorimetry–derivative thermogravimetric analysis was applied to investigating the mixture of transition metal acetates. X-ray powder diffraction and charge–discharge test were adopted to characterize the as-prepared LiNi0.8Co0.1Mn0.1O2. The mixture of transition metal acetates undergoes dehydration and decomposition during heating. All the examined LiNi0.8Co0.1Mn0.1O2 samples have a layered structure with R3 m space group. LiNi0.8Co0.1Mn0.1O2 samples prepared with different lithium sources under different synthesis conditions exhibit very different charge–discharge performances. The sample synthesized via the procedure of sintering at 800 °C after heating lithium carbonate and transition metal acetates at 550 °C achieves a highest capacity of 200.8 m A·h/g and an average capacity of 188.1 mA ·h/g in the first 20 cycles at 0.2C.

Prediction of liquid chromatography retention factors for α-branched phenylsulfonyl acetates using quantum chemical descriptors

The logarithms of retention factors normalized to a hypothetical pure water eluent(log k w) were determined on a reversed phase high performance liquid chromatography(RP HPLC) column (Li Chrosorb RP 18 column) for 20 new α\|branched phenylsulfonyl acetates. The atomic charge method was applied to develop quantitative structure retention relationships(QSRRs). Among the available geometric and electronic descriptors, surface area (S), ovality (O), and the charge of carboxyl group(Q OC ) are significant. In the model, the contribution of surface area (S) is the greatest. The molecular mechanism of retention was demonstrated through the model. With the correlation coefficient ( r 2 adj , adjusted for degrees of freedom) of 0.964, the standard error of 0.164 and the F value of 170.39, the model has good predictive capacity.

KBrO_3/MoO_3:An efficient reagent system for the oxidative deprotection of semicarbazones,1,1-diacetates and acetals

Semicarbazones, 1,1-diacetates and acetals are efficiently converted to their corresponding carbonyl compounds using synergistic effect between KBrO3 and MoO3 in refluxing CH3CN-H2O in good to high yields.

IDENTIFICATION OF DOUBLE BOND POSITION IN HEXADECENYL ACETATES BY MASS SPECTROMETRY

A method for locating double bond in hexadecenyl acetates has been developed by analyzing the mass spectral patterns on a fuzzy classification. The procedure was tested with the spectra of Δ~2- to Δ^(15)-isomers and the original double-bond position in these acetates was located unambiguously.

Cobalt Sulfate as a Recyclable Catalyst for Chemoselective Synthesis of Diacetates from Aldehydes

A mild and efficient method for diacetylation reaction was developed,by which diacetate could be achieved through the reaction of aldehyde with acetic anhydride,in the presence of cobalt sulfate,with an admirable yield,at room temperature,without solvent.The catalyst could be recycled six times without a distinct loss of activity.

A Novel Process Using Ion Exchange Resins for the Coproduction of Ethyl and Butyl Acetates

Before proposing an innovative process for the coproduction of ethyl and butyl acetates, the individual syntheses of ethyl acetate and butyl acetate by two different routes were first studied. These syntheses involved the reaction of ethanol or n-butanol with acetic acid or acetic anhydride in the presence of ion exchange resins: Amberlyst 15, Amberlyst 16, Amberlyst 36 and Dowex 50WX8. Kinetic and thermodynamic studies were performed with all resins. The lowest activation energy (Ea) value was obtained with Dowex 50WX8, which was identified as the best-performing resin, able to be reused at least in four runs without regeneration. The presence of water-azeotropes during the synthesis of ethyl acetate makes its purification difficult. A new strategy was adopted here, involving the use of ethanol and acetic anhydride as the starting material. In order to minimize acetic acid as co-product of this reaction, a novel two-step process for the coproduction of ethyl and butyl acetates was developed. The first step involves the production of ethyl acetate and its purification. Butyl acetate was produced in the second step: n-butanol was added to the mixture of acetic acid and the resin remaining after the first-step distillation. This process yields ethyl acetate and butyl acetate at high purity and shows an environmental benefit over the independent syntheses by green metrics calculation and life cycle assessment.

Iron-catalyzed[4+2]annulation of amidines with α,β-unsaturated ketoxime acetates toward 2,4,6-trisubstituted pyrimidines

An iron-catalyzed[4+2]annulation of amidines with α,β-unsaturated ketoxime acetates is described.This strategy employs amidines as CN units and provides a new protocol for the construction of 2,4,6-trisubstituted pyrimidines under batch and continuous flow conditions in moderate to good yields,exhibiting good functional group tolerance,scalability and operational simplicity.

Dietary sodium acetate and sodium butyrate improve high-carbohydrate diet utilization by regulating gut microbiota, liver lipid metabolism, oxidative stress, and inflammation in largemouth bass(Micropterus salmoides)

Background Adequate level of carbohydrates in aquafeeds help to conserve protein and reduce cost. However, studies have indicated that high-carbohydrate(HC) diet disrupt the homeostasis of the gut–liver axis in largemouth bass, resulting in decreased intestinal acetate and butyrate level.Method Herein, we had concepted a set of feeding experiment to assess the effects of dietary sodium acetate(SA) and sodium butyrate(SB) on liver health and the intestinal microbiota in largemouth bass fed an HC diet. The experimental design comprised 5 isonitrogenous and isolipidic diets, including LC(9% starch), HC(18% starch), HCSA(18% starch;2 g/kg SA), HCSB(18% starch;2 g/kg SB), and HCSASB(18% starch;1 g/kg SA + 1 g/kg SB). Juvenile largemouth bass with an initial body weight of 7.00 ± 0.20 g were fed on these diets for 56 d.Results We found that dietary SA and SB reduced hepatic triglyceride accumulation by activating autophagy(ATG101, LC3B and TFEB), promoting lipolysis(CPT1α, HSL and AMPKα), and inhibiting adipogenesis(FAS, ACCA, SCD1 and PPARγ). In addition, SA and SB decreased oxidative stress in the liver(CAT, GPX1α and SOD1) by activating the Keap1-Nrf2 pathway. Meanwhile, SA and SB alleviated HC-induced inflammation by downregulating the expression of pro-inflammatory factors(IL-1β, COX2 and Hepcidin1) through the NF-κB pathway. Importantly, SA and SB increased the abundance of bacteria that produced acetic acid and butyrate(Clostridium_sensu_stricto_1). Combined with the KEGG analysis, the results showed that SA and SB enriched carbohydrate metabolism and amino acid metabolism pathways, thereby improving the utilization of carbohydrates. Pearson correlation analysis indicated that growth performance was closely related to hepatic lipid deposition, autophagy, antioxidant capacity, inflammation, and intestinal microbial composition.Conclusions In conclusion, dietary SA and SB can reduce hepatic lipid deposition;and alleviate oxidative stress and inflammation in largemouth bass fed on HC diet. These beneficial effects may be due to the altered composition of the gut microbiota caused by SA and SB. The improvement effects of SB were stronger than those associated with SA.

Ethyl acetate fraction of Sargassum pallidum extract attenuates particulate matter-induced oxidative stress and inflammation in keratinocytes and zebrafish

Objective:To evaluate the effect of the ethyl acetate fraction derived from Sargassum pallidum extract against particulate matter(PM)-induced oxidative stress and inflammation in HaCaT cells and zebrafish.Methods:HaCaT cells and zebrafish were used to evaluate the protective effects of the ethyl acetate fraction of Sargassum pallidum extract against PM-induced oxidative stress and inflammation.The production of nitric oxide(NO),intracellular ROS,prostaglandin E_(2)(PGE_(2)),and pro-inflammatory cytokines,and the expression levels of COX-2,iNOS,and NF-κB were evaluated in PM-induced HaCaT cells.Furthermore,the levels of ROS,NO,and lipid peroxidation were assessed in the PM-exposed zebrafish model.Results:The ethyl acetate fraction of Sargassum pallidum extract significantly decreased the production of NO,intracellular ROS,and PGE_(2) in PM-induced HaCaT cells.In addition,the fraction markedly suppressed the levels of pro-inflammatory cytokines and inhibited the expression levels of COX-2,iNOS,and NF-κB.Furthermore,it displayed remarkable protective effects against PM-induced inflammatory response and oxidative stress,represented by the reduction of NO,ROS,and lipid peroxidation in zebrafish.Conclusions:The ethyl acetate fraction of Sargassum pallidum extract exhibits a protective effect against PM-induced oxidative stress and inflammation both in vitro and in vivo and has the potential as a candidate for the development of pharmaceutical and cosmeceutical products.

Acetic acid-and furfural-based adaptive evolution of Saccharomyces cerevisiae strains for improving stress tolerance and lignocellulosic ethanol production

Acetic acid and furfural are known as prevalent inhibitors deriving from pretreatment during lignocellulosic ethanol production.They negatively impact cell growth,glucose uptake and ethanol biosynthesis of Saccharomyces cerevisiae strains.Development of industrial S.cerevisiae strains with high tolerance towards these inhibitors is thus critical for efficient lignocellulosic ethanol production.In this study,the acetic acid or furfural tolerance of different S.cerevisiae strains could be significantly enhanced after adaptive evolution via serial cultivation for 40 generations under stress conditions.The acetic acid-based adaptive strain SPSC01-TA9 produced 30.5 g·L^(-1)ethanol with a yield of 0.46 g·g^(-1)in the presence of 9 g·L^(-1)acetic acid,while the acetic acid/furfural-based adaptive strain SPSC01-TAF94 produced more ethanol of 36.2 g·L^(-1)with increased yield up to 0.49 g·g^(-1)in the presence of both 9 g·L^(-1)acetic acid and 4 g·L^(-1)furfural.Significant improvements were also observed during non-detoxified corn stover hydrolysate culture by SPSC01-TAF94,which achieved ethanol production and yield of 29.1 g·L^(-1)and 0.49 g·g^(-1),respectively,the growth and fermentation efficiency of acetic acid/furfural-based adaptive strain in hydrolysate was 95%higher than those of wildtype strains,indicating the acetic acid-and furfural-based adaptive evolution strategy could be an effective approach for improving lignocellulosic ethanol production.The adapted strains developed in this study with enhanced tolerance against acetic acid and furfural could be potentially contribute to economically feasible and sustainable lignocellulosic biorefinery.

An ultrathin and robust single-ion conducting interfacial layer for dendrite-free lithium metal batteries

The practical application of rechargeable lithium metal batteries(LMBs) encounters significant challenges due to the notorious dendrite growth triggered by uneven Li deposition behaviors. In this work,a mechanically robust and single-ion-conducting interfacial layer, fulfilled by the strategic integration of flexible cellulose acetate(CA) matrix with rigid graphene oxide(GO) and Li F fillers(termed the CGL layer), is rationally devised to serve as a stabilizer for dendrite-free lithium(Li) metal batteries. The GCL film exhibits favorable mechanical properties with high modulus and flexibility that help to relieve interface fluctuations. More crucially, the electron-donating carbonyl groups(C=O) enriched in GCL foster a strengthened correlation with Li^(+), which availably aids the Li^(+)desolvation process and expedites facile Li^(+)mobility, yielding exceptional Li^(+) transference number of 0.87. Such single-ion conductive properties regulate rapid and uniform interfacial transport kinetics, mitigating the growth of Li dendrites and the decomposition of electrolytes. Consequently, stable Li anode with prolonged cycle stabilities and flat deposition morphologies are realized. The Li||LiFePO_(4) full cells with CGL protective layer render an outstanding cycling capability of 500 cycles at 3 C, and an ultrahigh capacity retention of 99.99% for over 220 cycles even under harsh conditions. This work affords valuable insights into the interfacial regulation for achieving high-performance LMBs.

Tailoring Ni based catalysts by indium for the dehydrogenative coupling of ethanol into ethyl acetate

Exploring stable and robust catalysts to replace the current toxic CuCr based catalysts for dehydrogenative coupling of ethanol to ethyl acetate is a challenging but promising task.Herein,novel NiIn based catalysts were developed by tailoring Ni catalysts with Indium(In)for this reaction.Over the optimal Ni0.1Zn0.7Al0.3InOx catalyst,the ethyl acetate selectivity reached 90.1%at 46.2%ethanol conversion under the conditions of 548 K and a weight hourly space velocity of 1.9 h^(-1)in the 370 h time on stream.Moreover,the ethyl acetate productivity surpassed 1.1 g_(ethyl acetate)g_(catalyst)^(-1)h^(-1),,one of the best performance in current works.According to catalyst characterizations and conditional experiments,the active sites for dehydrogenative coupling of ethanol to ethyl acetate were proved to be Ni4In alloys.The presence of In tailored the chemical properties of Ni,and subsequently inhibited the C-C cracking and/or condensation reactions during ethanol conversions.Over Ni4In alloy sites,ethanol was dehydrogenated into acetaldehyde,and then transformed into acetyl species with the removal of H atoms.Finally,the coupling between acetyl species and surface-abundant ethoxyde species into ethyl acetate was achieved,affording a high ethyl acetate selectivity and catalyst stability.

Isoimperatorin alleviates acetic acid-induced colitis in rats

Objective:To investigate the effect of isoimperatorin on histopathological and biochemical changes in acetic acid-induced colitis rats.Methods:Colitis was induced by intracolonic administration of acetic acid solution(4%v/v)in rats.Rats were divided into six groups including the sham group,the negative control group,the dexamethasone-treated group,and the groups treated with isoimperatorin(0.1,1,and 10 mg/kg/d by gavage).The treatments were administered for three days and then colonic status was assessed by macroscopic,histopathological,and biochemical analyses.Results:Isoimperatorin significantly alleviated colonic damage in a dose-dependent manner and improved histological changes in rats with acetic acid-induced colitis.It also significantly reduced myeloperoxidase,TNF-α,IL-1β,and malodialdehyde levels.Conclusions:Isoimperatorin alleviates acetic acid-induced colitis in rats and may be a potential therapeutic agent for the treatment of colitis.

Steam reforming of acetic acid over Ni/biochar of low metal-loading:Involvement of biochar in tailoring reaction intermediates renders superior catalytic performance

Biochar is a reactive carrier as it may be partially gasified with steam in steam reforming,which could influence the formation of reaction intermediates and modify catalytic behaviors.Herein,the Ni/biochar as well as two comparative catalysts,Ni/Al_(2)O_(3) and Ni/SiO_(2),with low nickel loading(2%(mass))was conducted to probe involvement of the varied carriers in the steam reforming.The results indicated that the Ni/biochar performed excellent catalytic activity than Ni/SiO_(2) and Ni/Al_(2)O_(3),as the biochar carrier facilitated quick conversion of the -OH from dissociation of steam to gasify the oxygen-rich carbonaceous intermediates like C=O and C-O-C,resulting in low coverage while high exposure of nickel species for maintaining the superior catalytic performance.In converse,strong adsorption of aliphatic intermediates over Ni/Al_(2)O_(3) and Ni/SiO_(2) induced serious coking with polymeric coke as the main type(21.5%and 32.1%,respectively),which was significantly higher than that over Ni/biochar(3.9%).The coke over Ni/biochar was mainly aromatic or catalytic type with nanotube morphology and high crystallinity.The high resistivity of Ni/biochar towards coking was due to the balance between formation of coke and gasification of coke and partially biochar with steam,which created developed mesopores in spent Ni/biochar while the coke blocked pores in Ni/Al_(2)O_(3) and Ni/SiO_(2) catalysts.

The effect of ethylene-vinyl acetate copolymer on the formation process of wax crystals and hydrates

Ethylene-vinyl acetate copolymer(EVA)as a kind of effective polymeric pour point depressant has been extensively used in the pipeline transportation of crude oil to inhibit wax deposition and improve the low temperature fluidity of crude oil.In this work,molecular dynamics simulations were performed to investigate the effect of EVA on wax-hydrate coexistence system to evaluate the application potentiality of EVA to the flow assurance of deep-sea oilegasewater multiphase flow system.Our simulation results reveal that wax molecules gradually stretched and stacked from random coiling to a directional and ordered crystalline state during the process of wax solidification.The strong affinity of polar vinyl acetate side chains of EVA to neighboring water molecules made the EVA molecule prefer being in a curly state,which disrupted the ordered crystallization of surrounding wax molecules and delayed the solidification rate of wax cluster.In addition,it is found that EVA cocrystallized with wax molecules to form eutectic when the wax was fully solidified.The simulation results of hydrate nucleation and growth show that the EVA molecule displayed a two-sided effect on gas adsorption of wax crystals,which was the key factor that affected the nucleation and growth of hydrates in the methane-water system.The nonpolar hydrocarbon backbone of EVA increased the diffusion rate of methane and water,allowing more methane to diffuse to the surface of wax crystals,reducing the methane concentration in aqueous solutions and inhibiting the hydrate formation.On the other hand,the nonpolar vinyl acetate chains had a repulsive effect on methane,which reduced the adsorption area of methane on the eutectic surface and decreased the adsorption threshold value of the wax crystal.The excluded methane molecules would continue dissociating in the aqueous phase and participating in the nucleation and growth process of hydrates.Therefore,the probability of hydrate formation would be increased.It was worth noting that the inhibition performance of EVA on hydrate formation mainly played a significant role in the system with small wax crystal,while its hydrate promotion effect played a dominant role in the system with lager wax crystal.In summary,EVA could significantly inhibit both of the wax and hydrate deposition for the waxgas-water multiphase system with low wax content.When the wax content in the system was high,the role of EVA was mainly played in the alleviation of wax crystallization rather than the gas hydrates.The results of the present work can contribute to a better understanding of EVA on wax deposition and hydrate formation,and provide theoretical support of the potential industrial applications of EVA.

Tuning the product selectivity of dimethyl oxalate hydrogenation over WO_(x) modified Cu/SiO_(2) catalysts

Product selectivity and reaction pathway are highly dependent on surface structure of heterogeneous catalysts.For vapor-phase hydrogenation of dimethyl oxalate(DMO),"EG route"(DMO→methyl glycolate(MG)ethylene glycol(EG)→ethanol(ET))and"MA route"(DMO→MG→methyl acetate(MA))were proposed over traditional Cu based catalysts and Mo-based or Fe-based catalysts,respectively.Herein,tunable yield of ET(93.7%)and MA(72.1%)were obtained through different reaction routes over WO_(x) modified Cu/SiO_(2) catalysts,and the corresponding reaction route was further proved by kinetic study and in-situ DRIFTS technology.Mechanistic studies demonstrated that H_(2) activation ability,acid density and Cu-WO_(x) interaction on the catalysts were tuned by regulating the surface W density,which resulted in the different reaction pathway and product selectivity.What's more,high yield of MA produced from DMO hydrogenation was firstly reported with the H_(2) pressure as low as 0.5 MPa.

Efficient and selective upcycling of waste polylactic acid into acetate using nickel selenide

The conversion of waste polylactic acid(PLA)plastics into high-value-added chemicals through electrochemical methods is a promising and sustainable approach.However,developing efficient and highly selective catalysts for lactic acid oxidation reaction(LAOR)and understanding the reaction process are challenging.Here,we report the electrooxidation of waste PLA to acetate at a high current density of 100 mA cm-2 with high Faraday efficiency(~95%)and excellent stability(>100 h)over a nickel selenide nanosheet catalyst.In addition,a total Faraday efficiency of up to 190%was achieved for carboxylic acids,including acetic acid and formic acid,by coupling with the cathodic CO_(2) reduction reaction.In situ experimental results and theoretical simulations revealed that the catalytic activity center of LAOR was dynamically formed NiOOH species,and the surface-adsorbed SeO_(x) species accelerated the formation of Ni~(3+)species,thus promoting catalytic activity.The mechanism of lactic acid electrooxidation was further elucidated.Lactic acid was dehydrogenated to produce pyruvate first and then formed CH_3CO due to preferential C-C bond cleavage,resulting in the presence of acetate.This work demonstrated a sustainable method for recycling waste PLA and CO_(2) into high-value-added products.

Novel Sustainable Cellulose Acetate Based Biosensor for Glucose Detection

In this study,green zinc oxide(ZnO)/polypyrrole(Ppy)/cellulose acetate(CA)film has been synthesized via solvent casting.This film was used as supporting material for glucose oxidase(GOx)to sensitize a glucose biosensor.ZnO nanoparticles have been prepared via the green route using olive leaves extract as a reductant.ZnO/Ppy nanocomposite has been synthesized by a simple in-situ chemical oxidative polymerization of pyrrole(Py)monomer using ferric chloride(FeCl3)as an oxidizing agent.The produced materials and the composite films were characterized using X-ray diffraction analysis(XRD),scanning electron microscope(SEM),Fourier transform infrared(FTIR)and thermogravimetric analysis(TGA).Glucose oxidase was successfully immobilized on the surface of the prepared film and then ZnO/Ppy/CA/GOx composite was sputtered with platinum electrode for the current determination at different initial concentrations of glucose.Current measurements proved the suitability and the high sensitivity of the constructed biosensor for the detection of glucose levels in different samples.The performance of the prepared biosensor has been assessed by measuring and comparing glucose concentrations up to 800 ppm.The results affirmed the reliability of the developed biosensor towards real samples which suggests the wide-scale application of the proposed biosensor.

Acetic acid additive in NaNO_(3)aqueous electrolyte for long-lifespan Mg-air batteries

Mg-air batteries have attracted tremendous attention as a potential next-generation power source for portable electronics and e-transportation due to their remarkable high theoretical volumetric energy density,environmental sustainability,and cost-effectiveness.However,the fast hydrogen evolution reaction(HER)in NaCl-based aqueous electrolytes impairs the performance of Mg-air batteries and leads to poor specific capacity,low energy density,and low utilization.Thus,the conventionally used NaCl solute was proposed to be replaced by NaNO_(3)and acetic acid additive as a corrosion inhibitor,therefore an electrolyte engineering for long-life time Mg-air batteries is reported.The resulting Mg-air batteries based on this optimized electrolyte demonstrate an improved discharge voltage reaching~1.8 V for initial 5 h at a current density of 0.5 mA/cm^(2) and significantly prolonged cells'operational lifetime to over 360 h,in contrast to only~17 h observed in NaCl electrolyte.X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry were employed to analyse the composition of surface film and scanning electron microscopy combined with transmission electron microscopy to clarify the morphology changes of the surface layer as a function of acetic acid addition.The thorough studies of chemical composition and morphology of corrosion products have allowed us to elucidate the working mechanism of Mg anode in this optimized electrolyte for Mg-air batteries.

Characteristics of patients with Wilson disease in the United States: An insurance claims database study

BACKGROUND Wilson disease(WD)is a progressive,potentially fatal degenerative disease affecting the liver and central nervous system.Given its low prevalence,collecting data on large cohorts of patients with WD is challenging.Comprehensive insur-ance claims databases provide powerful tools to collect retrospective data on large numbers of patients with rare diseases.AIM To describe patients with WD in the United States,their treatment and clinical outcome,using a large insurance claims database.METHODS This retrospective,longitudinal study was performed in the Clarivate Real-World Data Product database.All patients with≥2 claims associated with an Interna-tional Classification of Diseases 10(ICD-10)diagnostic code for WD(E83.01)between 2016 and 2021 were included and followed until death or study end.Patients were divided into two groups by whether or not they were documented to have received a specific treatment for WD.Clinical manifestations,hospital-isations,liver transplantation and death were documented.RESULTS Overall,5376 patients with an ICD-10 diagnostic code for WD were identified.The mean age at inclusion was 41.2 years and 52.0%were men.A specific WD treatment was documented for 885 patients(15.1%),although the number of patients taking zinc salts may be underestimated due to over the counter purchase.At inclusion,the mean age of patients with a documented treatment was 36.6±17.8 years vs 42.2±19.6 years in those without a documented treatment.During follow-up,273 patients(5.1%)died.Compared with the American general population,the standardised mortality ratio was 2.19.The proportion of patients with a documented WD-specific treatment who died during follow-up was 4.0%and the mean age at death 52.7 years.CONCLUSION Patients treated for WD in the United States had an excess early mortality compared with the American population.These findings indicate that there is a significant unmet need for effective treatment for WD in the United States.