Effect of Titanium Dioxide Nano Particles Incorporation on Mechanical and Physical Properties on Two Different Types of Acrylic Resin Denture Base

The aim of this study is to clarify the effect of different concentrations of titanium dioxide nanoparticles (Nps) on the properties of two types of heat polymerized acrylic resin. The tested parameters were flexural strength, impact strength, and microhardness. The two types of acrylic resin used in this study were conventional unmodified (Implacryl, Vertex) and high impact heat polymerized acrylic resin (Vertex-Dental, Netherlands). Both types of acrylic resin were modified by using 1% and 5% TiO2 Nps powder. Specimen’s dimensions were prepared according to the American Dental Association Specification No. 12. Three types of specimens were prepared: 1) flexural strength specimens 50 mm × 10 (±0.2) mm × 3 (±0.2) mm, 2) impact strength test specimens 60 mm × 6.0 mm × 4.0 mm, 3) microhardnesss specimens 25 mm × 10 mm × 3 (±0.2) mm. For each test 6 groups were prepared (each group containing 5 samples). Thirty specimens were prepared in each of the three tests, amounting to a total number of 90 specimens. Mechanical properties such as flexural strength (FS), impact strength and microhardness of the above mentioned specimens were determined using universal testing machine, Izod pendulum impact testing machine and Vickers microhardness tester, respectively. ISO Specification No. 1567 was followed in microhardness test. The data was collected and statistically analyzed. Flexural strength considerably decreased by increasing TiO2 concentration in both types of acrylic resin. Impact strength of the conventional acrylic resin modified by 1% of additives significantly increased. The microhardness is significantly increased by addition of 5% of TiO2 Nps. The Incorporation of TiO2 nanoparticles into acrylic resins can adversely affect its flexural strength. Meanwhile, the impact strength can be modified by small percentage of additives (abt. 1%). This effect is directly correlated with the concentration of nanoparticles. On the other hand, concentrations of TiO2 Nps (abt. 5%) positively affect the microhardness of both types of acrylic resin used in the present study.

Preparation and Characterization of Two-component Waterborne Polyurethane Comprised of Water-soluble Acrylic Resin and HDI Biuret

A two-component waterborne polyurethane(2K-WPU) was prepared by mixing water-soluble acrylic resin and hexamethylene diisocyanate biuret, and then diluted for phase inversion with water. Compared with water-soluble acrylic resin, the phase inversion of 2K-WPU occurs at lower water content. It is indicated by TEM that 2K-WPU parti-cles show a core-shell structure, in which HDI biuret is encapsulated by hydrophilic acrylic resin. 2K-WPU emulsion with HDI biuret has larger particle size and narrower distribution index, while for 2K-WPU emulsion with HDI iso-cyanurate, the latex not only has large particle size, but also has two-peak distribution. FTIR shows that the reaction be-tween HDI biuret and acrylic resin can complete in 12h. In addition, studies on effect of composition of acrylic resin on performance of 2K-WPU show that narrowing the polar difference between water-soluble acrylic resin and HDI biuret and improving the miscibility of two components are the key to prepare the transparent and high gloss films with high crosslinking density.

Water-Based Processing of Fiberboard of Acrylic Resin Composites Reinforced With Cellulose Wood Pulp and Cellulose Nanofibrils

Despite the great potential of cellulose wood pulp and cellulose nanofibrils as reinforcing filler in thermoplastics,its use is limited due to its tendency to form agglomerates and due to its high hydrophilic character.Here we describe fiberboard composites with high contents of wood pulp or cellulose nanofibrils,and a resin of poly(styrene-methyl-methacrylate-acrylic acid)used as water-based emulsion.Cellulose wood pulp and cellulose nanofibrils were used directly in the form of water suspensions.The method is based on the flocculation of the polymer emulsion followed by agglomeration of a mixture of the polymer emulsion and cellulose suspension,leading to the co-precipitation of the composite material,which can be easily separated from the water phase.Composites with acrylic polymer/cellulose fibers in the proportions of 75:25,50:50 and 25:75 wt%were prepared.Composites were characterized by scanning electron microscopy(SEM),Fourier transform infrared spectroscopy(FTIR),thermogravimetric analysis(TGA),dynamic mechanical analysis(DMA)and water absorption tests.SEM analysis revealed a very good dispersion of the fibers without evidence of agglomeration,which led to superior mechanical properties.These results showed the effectiveness of the methodology and the potential of cellulose wood pulp and CNF as reinforcement fillers in fiberboard composites and any other high fiber-content materials.

CURING KINETICS AND PROPERTIES OF ACRYLIC RESIN CURED WITH AZIRIDINE CROSSLINKER

A kind of aziridine crosslinkers was synthesized and used to crosslink acrylate copolymers. The crosslinking properties and curing kinetics of the resin were studied. It was found that with the increase of the content of crosslinker in the emulsion, the mechanical properties and solvent resistance of the resin will be apparently improved, but its glass transition temperature (T.) is very low. The lowest amount of crosslinker used in the acrylic resin emulsion is 0.25%. Curing kinetics studied by DSC show that this curing reaction occurs readily because the apparent activation energy of the reaction is low (65.1 kJ/mol). These results demonstrate that the aziridine crosslinker is indeed a low temperature crosslinking agent and can be used at room temperature.

Preparation and characterization of TiO_2/acrylic resin composite coatings on sintered NdFeB permanent magnets by electrochemical deposition

The sintered Nd Fe B permanent magnets are widely used in various industries because of their excellent magnetic and comprehensive properties. However, they are seriously hindered to further developments and applications owing to its poor corrosion resistance. In this paper,TiO2/acrylic resin composite coatings were successfully prepared on the sintered Nd Fe B permanent magnets by electrochemical deposition for the first time, and the corrosion behaviors were investigated by using immersion testing and potentiodynamic polarization tests. It is found that the coating is a composite, being composed of polymerized acrylic resin as the matrix and nano-rutile TiO2particles（-200 nm） as the reinforcements. It is about25 lm in thickness and its surface and cross-section exhibit uniform and smooth with no pores, cracks, and other defects. Compared with those of the uncoated Nd Fe B magnets, the weight loss of the coated samples immersed in H2SO4 solution reduces by two orders of magnitude,corrosion current density decreases by four orders of magnitude, and the corrosion potential of the coated sample is shifted in the noble direction by 400 m V. The mechanisms of corrosive resistance enhancement were discussed.

Improved thermal conductivity of styrene acrylic resin with carbon nanotubes, graphene and boron nitride hybrid fillers

In the process of printing and copying,the volatilization of toner produces tiny particles and harmful gases that are detrimental to the human body.Low-temperature printing and copying can reduce harmful gas emissions.Styrene acrylic resin is the main component of toner and the thermal conductivity of toner can be improved by increasing the thermal conductivity of styrene acrylic resin.In this paper,hexagonal boron nitride(h-BN),carboxyl modified multi-walled carbon nanotubes(MWCNTs-COOH)and graphene hybrid fillers were added into styrene acrylic resin to improve the thermal conductivity of resin composite by forming a connected thermal conductivity network in resin.The experimental result shows that the thermal conductivity of the h-BN/styrene acrylic resin composite increases with the increase in h-BN filler content(0-20wt%).When 20.0 wt%h-BN is added into styrene acrylic resin,the thermal conductivity is increased by 83.63%.Hybrid fillers(MWCNTs-COOH/graphene and 3.0 wt%h-BN)were added in styrene acrylic resin and the thermal conductivity of the composite is almost the same or higher than that of 20.0 wt%h-BN/styrene acrylic resin composite.The thermal conductivity of styrene acrylic resin composites improved by 69.57%and 87.14%via adding 1.5wt%CNTs-3 wt%h-BN and 1.0wt%graphene-3 wt%h-BN.MWCNTs-COOH or graphene can bridge isolated h-BN aggregates to form a thermally conductive network in styrene acrylic resin,while the addition of graphene improves the thermal conductivity of resin composite higher than that of MWCNTs-COOH.

Synthesis and Application of a New Acrylic Ester Resin for Recycling SIPA from its Water Solution

A new acrylic ester polymer YWB-7 resin was prepared and characterized. The properties of YWB-7 resin were compared with those of the commercial Amberlite XAD-7, Diaion HP2MG and hypercrosslinked macroporous polymer NDA-150 resins. Both surface area and micropore area of YWB-7 resin were bigger than those of XAD-7 resin and HP2MG resin. The YWB-7 resin was successfully employed to recycle 5-sodiosulfoisophthalic acids （SIPA） from its solutions with and without methanol.

Effects of Chairside Polishing and Brushing on SurfaceRoughness of Acrylic Denture Base Resins

The effects of 3 chairside polishing kits and mechanical brushing on the surface roughness of 3 different acrylic denture base resins were compared. Acrylic denture base resins （auto-polymerizing, heat-polymerizing, injected heat-polymerizing resins） were examined after a tungsten carbide bur, and after chairside polishing using 3 polishing kits and pumice. The specimens were subjected to mechanical brushing using a wear tester to simulate 30 000 strokes of brushing. The surface roughness of the acrylic denture base resin specimens was measured using a contact pro-filometer. After the test, the random polished acrylic resins were evaluated by scanning electron mi-croscopy （SEM） and atomic force microscopy （AFM）. Acrylic denture base resins polished using the 3 types of polishing kits had a smoother surface than those finished with the tungsten carbide bur （p〈0.05）. The surface of the resin polished by a TC cutter exceeded the Ra of 0.2 μm （p〈0.05）. The auto-polymerizing resin showed a significantly higher surface roughness than the heat-polymerizing resin and injected heat-polymerizing resin （p〉0.05）. In the case of polishing step wise, there was almost no change in surface roughness after brushing （p〉0.05）.

SYNTHESIS OF SOAP-FREE ACRYLIC HYDROSOLS

Poly(methyl methacrylate/ethyl acrylate/acrylic acid) hydrosols were prepared by employing soap-free polymerization, and (acrylic acid/butyl acrylate) oligomer was used as the polymeric surfactant. The effect of reaction condition on the morphology and particle size of the hydrosols was investigated. The minimum amount of acrylic acid in the hydrosols is 2%. The maximum weight average molecular weight (M-w) of polymer that assures soap-free emulsion conversion into hydrosol is about 1.2 x 10(5)-1.3 x 10(5). The particle transforming process was investigated, and an obvious change of particle diameter and morphology was observed.

PREPARATION AND PROPERTIES OF THERMOSETTING ACRYLIC COATINGS USING TITANIUM-OXO-CLUSTER AS A CURING AGENT

Thermosetting acrylic coatings were prepared by using carboxyl acid group-containing acrylic oligomer and curing with titanium-oxo-clusters which were first pre-hydrolyzed from titanium n-butoxide.The curing ability of the titanium-oxo-cluster was examined using a microdielectric analytical(DEA)curing monitor,Fourier transformed infrared spectroscopy(FTIR),and Soxhlet extraction experiments,and the properties of the resulted coatings were investigated with pendulum hardness tester,dynamic mechanical analysis(DMA),thermogravimetric analysis(TGA)and ultraviolet-visible spectrometer.The effect of titania-oxo-cluster in leading acrylic oligomers to form thermosetting acrylic coatings was confirmed.An increasing pendulum hardness and modulus of acrylic coatings with increasing titania content was observed, which resulted from the increment of crosslinking degree rather than of the titania content.The thermosetting acrylic/titania coatings also showed better thermal stability and higher UV-blocking properties than those coatings using organic curing agent.

Influence of Glass Fiber wt% and Silanization on Mechanical Flexural Strength of Reinforced Acrylics

The aim is to evaluate the flexural strength of acrylic resin bars depending on the addiction of glass fibers with or without previous 3-methacryloxypropyl-trimethoxysilane (silane) application. Short fibers (3 mm) were treated and added to an acrylic resin powder, being further mixed with acrylic liquid to create bars (25 × 2 × 2 mm) of 11 experimental groups (N = 10), according to the interaction of experimental factors: weight % of glass fibers: (0.5;1;3;4;6 and 7) and silane application (with silane (S) or without silane (N)). Flexural strength and scanning microscopy evaluation were performed (SEM). Data (MPa) were submitted to ANOVA and Tukey (α = 5%). A significant difference between groups was observed (p = 0.001): S7%(128.85 ± 35.76)a, S6% (119.31 ± 11.97)ab, S4% (116.98 ± 25.23)ab, N4% (107.85 ± 24.88)abc, S1% (96.29 ± 20.65)bc, S0.5% (89.29 ± 7.33)cd, S3% (89.0 ± 11.27)cd, N3% (86.79 ± 17.63)cd, N1% (85.43 ± 16.44)cd, Control (73.29 ± 25.0)de, N0.5% (59.58 ± 19.46)e. For N groups, it was not possible to include more than 4%wt fibers. SEM showed better fiber-resin interaction for S groups, and fractures around fibers on N groups. Previous silane application enables the addiction of greater quantity of glass fibers and better interaction with the acrylic resin resulting in higher flexural strength. Without silane, fibers seem to act as initial crack points due to poor interaction.

Preparation and Performance of Corona-proof Conductive Composite Coatings

Because of its merits,acrylic resin was chosen to improve the mechanical,conductive and hydrophobic properties.Carbon fiber powders (CF),carbon nanotubes (MWCNT),and nano-TiO_(2) were incorporated into the acrylic resin to prepare the corona-proof conductive composite coatings.The incorporation of CF and MWCNT may improve the conductivity and mechanical strength of the coatings.However,the addition of nano-TiO_(2) may increase the hydrophobicity of the coatings.Thus,the effects of different additives on the mechanical properties,conductivity,hydrophobicity and heat resistance of the conductive film were studied.The experimental results show that the incorporation of carbon fiber powders and multi walled carbon nanotubes can significantly improve both the conductivity and mechanical properties of the conductive coatings,and the addition of nano titanium dioxide can improve the hydrophobicity of the conductive film.

New Mini Dental Implant Attachments versus O-ring Attachment after Cyclic Aging: Analysis of Retention Strength and Gap Space

Overdenture as a treatment modality for both partially and fully edentulous patients is costeffective and less expensive. The purpose of the present study was to examine the newly fabricated attachments by comparing them with conventional O-ring attachment in vitro in terms of retention force and cyclic aging resistance. A total of 150 samples were prepared and divided into five groups according to the materials used(O-ring attachment, Deflex M10 XR, Deflex Classic SR, Deflex Acrilato FD, and flexible acrylic resin). The retention force of different attachments was measured by a mini dental implant after three subsequent aging(0, 63, and 126) cycles in the circumstances similar to the oral environment. The gap space between the head of the implant and the inner surface of the attachments was detected. Two-way analysis of variance(ANOVA) analysis with multiple comparisons test was applied for statistical analysis. The results showed that Deflex M10 XR had the highest retention force and the lowest gap space after cyclic aging; in addition, by comparing the relative force reduction, the lowest values were obtained in the O-ring attachment and the highest values in the flexible acrylic resin attachment. The retention force measured after cyclic aging for the Deflex M10 XR attachment was greatly improved when compared with the O-ring attachment and other types of attachment materials; in addition, the Deflex M10 XR attachment exhibited the minimum gap space between the inner surface and the mini dental implant head. In conclusion, Deflex M10 XR has the ability to withstand weathering conditions and retains its durable and retentive properties after aging when compared with other attachments.

The Effect of Partial Removable Denture Use on Oral Health Related Quality of Life and Masticatory Function, after 5 Years Use

The aim of this study was to evaluate whether partial removable denture use indeed leads to improved oral health related quality of life and masticatory function. Materials and Methods: Partially edentulous patients presenting for removable denture treatment at the Prosthodontics Service in the Hospital Affiliated to Kinshasa University (Democratic Republic of Congo) were assessed for enrolment in this study. After applying exclusion criteria, 378 patients were included in the study, and randomly assigned into 2 groups. Oral health related quality of life (OHIP-23) and mastication time (MaT), number of chewing cycles (MaC), mastication frequency (MaF), and the sizes of the peanut fragments (FraS) were compared in both groups. Statistical significance was set at p < 0.05. Results: The average MaC, MaT, MaF, and FraS were 119 (± SD 53.70), 86.75 (±SD 35.35), 1.38 (±SD 0.25), and 3.3 (±SD 3.25) for the denture group and 77.9 (±SD 23.9), 60.2 (±SD 17.91), 1.29 (±SD 0.15), and 1.5 (±SD 0.7) for the non-denture group, respectively. Conclusion: The overall oral health related quality of life was best in the non-denture than denture.

Risks Factors of Caries and Periodontal Diseases in the Patients, after 5 Years Use a Partial Removable Denture

Objective: The goal of the removable partial denture is to restore impaired esthetics and masticatory function by replacing missing teeth. The aim of this study was to establish a possible correla-tion between removable partial denture in acrylic resin use after 5 years and dental diseases. Materials and Methods: Partially edentulous patients presenting for removable denture treatment at the Prosthodontics service of the Affiliated Hospital of Kinshasa University, Democratic Republic of Congo were assessed in this study. Patients were randomly assigned into 2 groups: Denture and non-denture group. Caries and periodontal diseases were compared between both groups. Statistical significance was set at p < 0.05. Results: The average age in the denture and non-denture-group was 53.15 (±SD 22.05) and 31.59 (±SD 11.98) years. Out of 160 teeth were decayed, both 110 teeth (68.75%) in the denture-group and 50 teeth (31.25%) in the non-denture group. The DMFT index calculated at start time of the study was 0.2 for both groups, after five years was 7.1 for the denture-group and 2.6 for the non-denture-group. The plaque index in the denture-group had an index of 1 and that of non-denture-group was 0.5. Conclusion: The relationship has been found between patients’ wearers a RPD and dental diseases.

Flexural Strength of Temporary Restorative Materials Stored in Different Solutions

Aim: The aim of this study was to evaluate the effects of different solutions on the flexural strength of one methacrylate-based resin and three bis-acryl resin provisional materials using an in vitro model test system. Methods: The specimens (25 × 2 × 2 mm) were prepared from interim materials and stored for 14 days at 37&deg;C in different solutions (coffee, burn, cola) and distilled water (control group). A standard three-point bending test was conducted on the specimens with an Instron universal testing machine at crosshead speed of 0.5 mm/min. Data were analyzed using the one-way analysis of variance and Tukey HSD multiple comprasion tests. Results: The methacry-late-based resin (Takilon) showed the least fracture strength (61.6 - 85.6 MPa). One of the bis-acryl resins (Protemp 4-3M ESPE) showed the highest fracture strength (112 - 128 MPa). Conclusions: All bis-acryl resin composite materials exhibited high fracture strength over the traditional methyl methacrylate resin throughout the 14 day time interval of investigation. The different solutions have not statistically significant effect on the flexure strength values on four temporary materials.

硅丙乳液及硅丙外墙涂料的研制

用水解抑制和后交联控制技术 ,将有机硅氧烷和聚硅氧烷引入丙烯酸树脂的主链中 ,共聚合成AB -1硅丙乳液 ,该乳液中的有机硅含量达到20%以上。以AB -1硅丙乳液为基料生产的水性硅丙外墙涂料 ,具有优异的耐候性、抗沾污性、憎水性及附着力等 。