Robust control of hand wheel torque for active front steering system

Active front steering(AFS)system has been used as a promising technology which improves the steering portability and handing stability of vehicles.It employs a steering motor to realize the functions of variable steering ratio and vehicle stability control.However,it has a serious problem of unexpected reaction hand wheel torque caused by the additional steering angle.In this paper,the optimum hand wheel torque is designed based on the linear tire model.Considering the uncertainty and disturbance of the steering system and vehicle,an H∞controller is developed to make sure the hand wheel torque follows the reference torque accurately and quickly.The simulation shows that the proposed controller can compensate the unnatural reaction torque and provide a good steering feel for the driver.

PARAMETER OPTIMIZATION OF ELECTRIC POWER STEERING INTEGRATED WITH ACTIVE FRONT STEERING FUNCTION

The dynanaic model of a novel electric power steering（EPS） system integrated with active front steer- ing function and the three-freedom steering model are built. Based on these models, the concepts and the quanti- tative expressions of road feel, sensitivity, and operation stability of the steering are introduced. Then, according to constrained optimization features of multi-variable function, a genetic algorithm is designed. Making the road feel of the steering as optimization objective, and operation stability and sensitivity of the steering as constraints, the system parameters are optimized by the genetic and the coordinate rotation algorithms. Simulation results show that the optimization of the novel EPS system by the genetic algorithm can effectively improve the road feel, thus providing a theoretical basis for the design and optimization of the novel EPS system.

Generalized Internal Model Robust Control for Active Front Steering Intervention

Because of the tire nonlinearity and vehicle＇s parameters＇uncertainties,robust control methods based on the worst cases,such as H_∞,μsynthesis,have been widely used in active front steering control,however,in order to guarantee the stability of active front steering system（AFS）controller,the robust control is at the cost of performance so that the robust controller is a little conservative and has low performance for AFS control.In this paper,a generalized internal model robust control（GIMC）that can overcome the contradiction between performance and stability is used in the AFS control.In GIMC,the Youla parameterization is used in an improved way.And GIMC controller includes two sections：a high performance controller designed for the nominal vehicle model and a robust controller compensating the vehicle parameters＇uncertainties and some external disturbances.Simulations of double lane change（DLC）maneuver and that of braking on split-μroad are conducted to compare the performance and stability of the GIMC control,the nominal performance PID controller and the H_∞controller.Simulation results show that the high nominal performance PID controller will be unstable under some extreme situations because of large vehicle＇s parameters variations,H_∞controller is conservative so that the performance is a little low,and only the GIMC controller overcomes the contradiction between performance and robustness,which can both ensure the stability of the AFS controller and guarantee the high performance of the AFS controller.Therefore,the GIMC method proposed for AFS can overcome some disadvantages of control methods used by current AFS system,that is,can solve the instability of PID or LQP control methods and the low performance of the standard H_∞controller.

ACTIVE FRONT STEERING DURING BRAKING PROCESS

An active front steering （AFS） intervention control during braking for vehicle stability is presented. Based on the investigation of AFS mechanism, a simplified model of steering system is established and integrated with vehicle model. Then the AFS control on vehicle handling dynamics during braking is designed. Due to the difficulties associated with the sideslip angle measurement of vehicle, a state observer is designed to provide real time estimation. Thereafter, the controller with the feedback of both sideslip and yaw angle is implemented. To evaluate the system control, the proposed AFS controlled vehicle has been tested in the Hardware-in-the-loop-simulation （HILS） system and compared with that of conventional vehicle. Results show that AFS can improve vehicle lateral stability effectively without reducing the braking performance.

Yaw stability control using the fuzzy PID controller for active front steering

In order to improve the yaw stability of the vehicle with active front steering system, an adaptive PID-type fuzzy control scheme is designed to make the yaw rate tracking the desired values as close as possible. A 2-DOF vehicle model with active front steering is built firstly, and then the fuzzy PID controller is designed in detail. The simulation investigations of the yaw stability with different steering ma- neuvers are performed. The simulation results show the effectiveness of the fuzzy PID controller for improving the vehicle＇s yaw stability.

Integration optimization of novel electric power steering system based on quality engineering theory

The dynamic model of a novel electric power steering （EPS） system integrated with active front steering function （the novel EPS system） is built. The concepts and quantitative expressions of the steering road feel, steering sensibility, and steering operation stability are introduced. Based on quality engineering theory, the optimization algorithm is proposed by integrating the Monte Carlo descriptive sampling, elitist non-dominated sorting genetic algorithm （NSGA-II） and 6-sigma design method. With the steering road feel and the steering portability as optimization targets, the system parameters are optimized by the proposed optimization algorithm. The simulation results show that the system optimized based on quality engineering theory can improve the steering road feel, guarantee steering stability and steering portability and thus provide a theoretical basis for the design and optimization of the novel electric power steering system.

Path planning and stability control of collision avoidance system based on active front steering

Vehicle collision avoidance system is a kind of auxiliary driving system based on vehicle active safety,which can assist the driver to take the initiative to avoid obstacles under certain conditions,so as to effectively improve the driving safety of vehicle.This paper presents a collision avoidance system for an autonomous vehicle based on an active front steering,which mainly consists of a path planner and a robust tracking controller.A path planner is designed based on polynomial parameterization optimized by simulated annealing algorithm,which plans an evasive trajectory to bypass the obstacle and avoid crashes.The dynamic models of the AFS system,vehicle as well as the driver model are established,and based on these,a robust tracking controller is proposed,which controls the system to resist external disturbances and work in accordance with the planning trajectory.The proposed collision avoidance system is testified through CarSim and Simulink combined simulation platform.The simulation results show that it can effectively track the planning trajectory,and improve the steering stability and anti-interference performance of the vehicle.