Adaptive Robust Servo Control for Vertical Electric Stabilization System of Tank and Experimental Validation

A tracking stability control problem for the vertical electric stabilization system of moving tank based on adaptive robust servo control is addressed.This paper mainly focuses on two types of possibly fast timevarying but bounded uncertainty within the vertical electric stabilization system:model parameter uncertainty and uncertain nonlinearity.First,the vertical electric stabilization system is constructed as an uncertain nonlinear dynamic system that can reflect the practical mechanics transfer process of the system.Second,the dynamical equation in the form of state space is established by designing the angular tracking error.Third,the comprehensive parameter of system uncertainty is designed to estimate the most conservative effects of uncertainty.Finally,an adaptive robust servo control which can effectively handle the combined effects of complex nonlinearity and uncertainty is proposed.The feasibility of the proposed control strategy under the practical physical condition is validated through the tests on the experimental platform.This paper pioneers the introduction of the internal nonlinearity and uncertainty of the vertical electric stabilization system into the settlement of the tracking stability control problem,and validates the advanced servo control strategy through experiment for the first time.

The prediction of projectile-target intersection for moving tank based on adaptive robust constraint-following control and interval uncertainty analysis

To improve the hit probability of tank at high speed,a prediction method of projectile-target intersection based on adaptive robust constraint-following control and interval uncertainty analysis is proposed.The method proposed provides a novel way to predict the impact point of projectile for moving tank.First,bidirectional stability constraints and stability constraint-following error are constructed using the Udwadia-Kalaba theory,and an adaptive robust constraint-following controller is designed considering uncertainties.Second,the exterior ballistic ordinary differential equation with uncertainties is integrated into the controller,and the pointing control of stability system is extended to the impact-point control of projectile.Third,based on the interval uncertainty analysis method combining Chebyshev polynomial expansion and affine arithmetic,a prediction method of projectile-target intersection is proposed.Finally,the co-simulation experiment is performed by establishing the multi-body system dynamic model of tank and mathematical model of control system.The results demonstrate that the prediction method of projectile-target intersection based on uncertainty analysis can effectively decrease the uncertainties of system,improve the prediction accuracy,and increase the hit probability.The adaptive robust constraint-following control can effectively restrain the uncertainties caused by road excitation and model error.

Adaptive Robust Control with Leakage-Type Control Law for Trajectory Tracking of Exoskeleton Robots

This paper investigates the trajectory following problem of exoskeleton robots with numerous constraints. However, as a typical nonlinear system with variability and parameter uncertainty, it is difficult to accurately achieve the trajectory tracking control for exoskeletons. In this paper, we present a robust control of trajectory tracking control based on servo constraints. Firstly, we consider the uncertainties (e.g., modelling errors, initial condition deviations, structural vibrations, and other unknown external disturbances) in the exoskeleton system, which are time-varying and bounded. Secondly, we establish the dynamic model and formulate a close-loop connection between the dynamic model and the real world. Then, the trajectory tracking issue is regarded as a servo constraint problem, and an adaptive robust control with leakage-type adaptive law is proposed with the guaranteed Lyapunov stability. Finally, we conduct numerical simulations to verify the performance of the proposed controller.

Adaptive Robust Tracking Control of Pressure Trajectory Based on Kalman Filter

When adaptive robust control（ARC） strategy based on backstepping design is applied in pneumatic servo control, accurate pressure tracking in motion is especially necessary for both force and position trajectories tracking ofrodless pneumatic cylinders, and therefore an adaptive robust pressure controller is developed in this paper to improve the tracking accuracy of pressure trajectory in the chamber when the pneumatic cylinder is moving. In the proposed adaptive robust pressure controller, off-line fitting of the orifice area and on-line parameter estimation of the flow coefficient are utilized to have improved model compensation, and meanwhile robust feedback and Kalman filter are used to have strong robustness against uncertain nonlinearities, parameter fluctuations and noise. Research results demonstrate that the adaptive robust pressure controller could not only track various pressure trajectories accurately even when the pneumatic cylinder is moving, but also obtain very smooth control input, which indicates the effectiveness of adaptive model compensation. Especially when a step pressure trajectory is tracked under the condition of the movement of a rodless pneumatic cylinder, maximum tracking error of ARC is 4.46 kPa and average tracking error is 0.99 kPa, and steady-state error of ARC could achieve 0.84 kPa, which is very close to the measurement accuracy of pressure transducer.

Adaptive robust control for triple avoidance - striking - arrival performance of uncertain tank mechanical systems

This paper puts forward an unprecedented avoidance-striking-arrival problem aiming to address the need for tank's uncertain mechanical systems on the intelligent battlefield.The associated system uncertainties(possibly rapid)are time-varying but bounded(possibly unknown).The goal is to design a controller that enables the tank to aim at and attack the enemy tank while keeping itself(out of the enemy fire zone).The tank maintains this condition until reaching the predefined region.In this paper,an approximate constraint following control method is adopted to solve this problem,and the original constraints are creatively divided into two categories:the avoidance-tracking constraint and the striking-arrival constraint.An adaptive robust control method is proposed and consequently verified through simulation experiments.It is proved that the system fully obeys the avoidance-tracking-constraint and strictly obeys the striking-arrival constraint under the control input.Besides,the control of the tank vehicle running system and tank gun bidirectional stabilization system are unified to deal with the control signal delay caused by complex uncertainties on the battlefield.Overall,this paper reduced the delay of signal transmission in the system while solved the avoidance-striking-arrival problem.

Adaptive robust feedback control of moving target tracking for all-Electrical tank with uncertainty

A moving target tracking control problem for marching tank based on adaptive robust feedback control scheme is addressed.A series of preparations is needed for tank gun before shooting a target,the purpose of this paper is to design a control system to fulfill two requirements in this process:the turretbarrel system of tank needs to be adjusted from off-target position to command position and point to the moving target stably when there are strong uncertainties(modeling error,uncertain disturbance with unknown boundaries and road excitation) in the system.Considering the characteristic of coupled interaction,the first thing we do in this paper is to build a coupled analysis model of turret-barrel system with uncertainty term in state-space form.Second,an adaptive robust feedback control scheme is proposed by adding adaptive law to overcome the uncertainty.Third,multi-body dynamics software is used to establish the mechanical mechanism of the tank,and DC-motor module is established in SIMULINK environment,thus the target information and tracking error of the control system is collected and transferred,the gear-ball screw is derived directly by the output torque of the DC-motor module.Finally,the control system and the 3D model are combined together by means of Recur Dyn/SIMULINK co-simulation,the turret-barrel system of tank can approximately track the moving target in a certain range.With the adaptive robust feedback control,the target action is completely followed when the target location is constantly changing.

Adaptive robust control for electrical cylinder with friction compensation usingmodified LuGre model

The position tracking control problem of an electrical cylinder in the presence of dynamic friction nonlinearities in its transmission process is addressed in this paper. First, a torque decou- piing approach is proposed to formulate the dynamic model. Secondly, to compensate the friction in the case of servo motion, a modified LuGre model is designed to make a continuous transition be- tween a static model at a high speed and a LuGre model at a low speed to avoid instability due to dis- cretization with a finite sampling rate. To accelerate the speed of estimating time-varying parame- ters, a fast adaption law is proposed by designing an attraction domain around a rough value related to the load force. Finally, a discontinuous projection based adaptive robust controller is synthesized to effectively handle parametric uncertainties for ensuring a guaranteed robust performance. A Lya- punov stability analysis demonstrates that all signals including tracking errors have the guaranteed convergent and bounded performance. Extensive comparative simulations with sinusoidal and point- point tracks are obtained respectively in low and high speeds. The results show the effectiveness and the achievable control performance of the proposed control strategy.

Pressure Regulation for Earth Pressure Balance Control on Shield Tunneling Machine by Using Adaptive Robust Control

Most current studies about shield tunneling machine focus on the construction safety and tunnel structure stability during the excavation. Behaviors of the machine itself are also studied, like some tracking control of the machine. Yet, few works concern about the hydraulic components, especially the pressure and flow rate regulation components. This research focuses on pressure control strategies by using proportional pressure relief valve, which is widely applied on typical shield tunneling machines. Modeling of a commercial pressure relief valve is done. The modeling centers on the main valve, because the dynamic performance is determined by the main valve. To validate such modeling, a frequency-experiment result of the pressure relief valve, whose bandwidth is about 3 Hz, is presented as comparison. The modeling and the frequency experimental result show that it is reasonable to regard the pressure relief valve as a second-order system with two low corner frequencies. PID control, dead band compensation control and adaptive robust control（ARC） are proposed and simulation results are presented. For the ARC, implements by using first order approximation and second order approximation are presented. The simulation results show that the second order approximation implement with ARC can track 4 Hz sine signal very well, and the two ARC simulation errors are within 0.2 MPa. Finally, experiment results of dead band compensation control and adaptive robust control are given. The results show that dead band compensation had about 30° phase lag and about 20% off of the amplitude attenuation. ARC is tracking with little phase lag and almost no amplitude attenuation. In this research, ARC has been tested on a pressure relief valve. It is able to improve the valve＇s dynamic performances greatly, and it is capable of the pressure control of shield machine excavation.

Guaranteeing the Fault Transient Performance of Aerospace Multiphase Permanent Magnet Motor System: an Adaptive Robust Speed Control Approach

To enhance the fault transient performance of aerospace multiphase permanent magnet synchronous motor(PMSM)system,an adaptive robust speed control is proposed regardless of the phase open-circuit(OC)and short-circuit(SC)fault in this paper,which can be applied for both the redundant motor system and fault tolerant motor system.For aerospace multiphase PMSM system,besides external load disturbance and system parameter perturbation,there inevitably exists the electromagnetic torque ripple in fault transient process,which can degrade the system performance and even cause the system instability.To cope with this issue,the electromagnet torque ripple of the multiphase PMSM system in fault transient process is first analyzed.Then,by considering the electromagnet torque fluctuation caused by fault transient as a system uncertainty,a novel adaptive robust speed control scheme is proposed,while the adaptive law is constructed to emulate the total system uncertainty bound,which include the load disturbance,the parameter variation,and the electromagnetic torque fluctuation due to fault transient.The resulting control can ensure the speed control performance even in fault transient process regardless of the uncertainty,in which no prior estimation of the uncertainty bound is required.In addition,the proposed adaptive robust speed control is demonstrated by a six-phase PMSM experimental platform.The novelty of this research is to explore a novel adaptive robust speed control to strengthen the fault tolerance performance of multiphase PMSM system even in fault transient process,which requires no prior estimation of the uncertainty bound.

Cross-coupling integral adaptive robust posture control of a pneumatic parallel platform

A pneumatic parallel platform driven by an air cylinder and three circumambient pneumatic muscles was considered. Firstly, a mathematical model of the pneumatic servo system was developed for the MIMO nonlinear model-based controller designed. The pneumatic muscles were controlled by three proportional position valves, and the air cylinder was controlled by a proportional pressure valve. As the forward kinematics of this structure had no analytical solution, the control strategy should be designed in joint space. A cross-coupling integral adaptive robust controller(CCIARC) which combined cross-coupling control strategy and traditional adaptive robust control(ARC) theory was developed by back-stepping method to accomplish trajectory tracking control of the parallel platform. The cross-coupling part of the controller stabilized the length error in joint space as well as the synchronization error, and the adaptive robust control part attenuated the adverse effects of modelling error and disturbance. The force character of the pneumatic muscles was difficult to model precisely, so the on-line recursive least square estimation(RLSE) method was employed to modify the model compensation. The projector mapping method was used to condition the RLSE algorithm to bound the parameters estimated. An integral feedback part was added to the traditional robust function to reduce the negative influence of the slow time-varying characteristic of pneumatic muscles and enhance the ability of trajectory tracking. The stability of the controller designed was proved through Laypunov's theory. Various contrast controllers were designed to testify the newly designed components of the CCIARC. Extensive experiments were conducted to illustrate the performance of the controller.

Pressure observer based adaptive robust trajectory tracking control of a parallel manipulator driven by pneumatic muscles

This paper presents a pressure observer based adaptive robust controller (POARC) for posture trajectory tracking of a parallel manipulator driven by three pneumatic muscles without pressure sensors. Due to model errors of the static forces and friction forces of pneumatic muscles, simplified average flow rate characteristics of valves, unknown disturbances of entire system, and unmeasured pressures, there exist rather severe parametric uncertainties, nonlinear uncertainties and dynamic uncertainties in modeling of the parallel manipulator. A nonlinear pressure observer is constructed to estimate unknown pressures on the basis of a single-input-single-output (SISO) decoupling model that is simplified from the actual multiple-input-multiple-output (MIMO) coupling model of the parallel manipulator. Then, an adaptive robust controller integrated with the pressure observer is developed to accomplish high precision posture trajectory tracking of the parallel manipulator. The experimental results indicate that the system with the proposed POARC not only achieves good control accuracy and smooth movement but also maintains robustness to disturbances.

Adaptive Robust Filtering Algorithm for BDS Medium and Long Baseline Three Carrier Ambiguity Resolution

For classical TCAR(three carrier ambiguity resolution)algorithm is affected by ionospheric delay and measurement noise,it is difficult to reliably fix ambiguity at medium and long baselines.An improved TCAR algorithm which takes the influence of ionospheric delay into account and has good adaptive robustness is proposed.On the basis of the non-geometric TCAR model,ionospheric delay is obtained by linearly combining extra-wide-lane with fixed ambiguity,and then wide-lane ambiguity is solved.Solving narrow-lane ambiguity by adaptive robust filtering by constructing optimal combination observation,which can effectively improve the fixed success rate of narrow-lane ambiguity and reduce the adverse effects of gross error.Experimental results show that the improved TCAR algorithm can guarantee a high fixed correct rate of wide-lane ambiguity,effectively improve fixed success rate of narrow-lane ambiguity,and has a good ability to resist gross error.

Robust adaptive leaderless consensus of unknown non-minimum phase linear multi-agent systems subject to disturbances and/or unmodeled dynamics

This article investigates the problem of robust adaptive leaderless consensus for heterogeneous uncertain nonminimumphase linear multi-agent systems over directed communication graphs. Each agent is assumed tobe of unknown nominal dynamics and also subject to external disturbances and/or unmodeled dynamics. Anovel distributed robust adaptive control strategy is proposed. It is shown that the robust adaptive leaderlessconsensus problem is solved with the proposed control strategy under some sufficient conditions. Two examplesare provided to demonstrate the efficacy of the proposed control strategy.

Adaptive Robust Dead-Zone Compensation Control of Electro-Hydraulic Servo Systems with Load Disturbance Rejection

A backstepping method based adaptive robust dead-zone compensation controller is pro- posed for the electro-hydraulic servo systems （EHSSs） with unknown dead-zone and uncertain system parameters. Variable load is seen as a sum of a constant and a variable part. The constant part is regarded as a parameter of the system to be estimated real time. The variable part together with the friction are seen as disturbance so that a robust term in the controller can be adopted to reject them. Compared with the traditional dead-zone compensation method, a dead-zone compensator is incor- porated in the EH$S without constructing a dead-zone inverse. Combining backstepping method, an adaptive robust controller （ARC） with dead-zone compensation is formed. An easy-to-use ARC tuning method is also proposed after a further analysis of the ARC structure. Simulations show that the proposed method has a splendid tracking performance, all the uncertain parameters can be estimated, and the disturbance has been rejected while the dead-zone term is well estimated and compensated.

ROBUST ADAPTIVE CONTROL SCHEME FOR IMPROVING LOW-SPEED PROFILE TRACKING PERFORMANCE OF HYBRID STEPPING MOTOR SERVO DRIVE

A robust adaptive control approach is presented to improve the performance of the control scheme proposed in the authors＇ previous work, aiming at producing a low ripple hybrid stepping motor servo drive for precision profile tracking at a low speed. In order to construct a completely integrated control design philosophy to reduce torque ripple and at the same time to enhance tracking performance, the properties of nonlinear uncertainties in the system dynamics are uncovered, and then incorporated into the design of the controller. The system uncertainties concerned with ripple dynamics and other external disturbances are composed of two categories. The first category of uncertainties with linear parameterization arising from the detention effect is dealt with by the wellknown adaptive control method. A robust adaptive method is used to deal with the second category of uncertainties resulting from the non-sinusoidal flux distribution. The μ-modification scheme is used to cease parameter adaptation by the robust adaptive control law, thus ensuring that the trajectory tracking error asymptotically converges to a pre-specified boundary. Experiments are performed with a typical hybrid stepping motor to test its profile tracking accuracy. Results confirm the proposed control scheme.

Robust fault-tolerant controller design for linear time-invariant systems with actuator failures:an indirect adaptive method

In this paper,indirect adaptive state feedback control schemes are developed to solve the robust fault-tolerant control （FTC） design problem of actuator fault and perturbation compensations for linear time-invariant systems.A more general and practical model of actuator faults is presented.While both eventual faults on actuators and perturbations are unknown,the adaptive schemes are addressed to estimate the lower and upper bounds of actuator-stuck faults and perturbations online,as well as to estimate control effectiveness on actuators.Thus,on the basis of the information from adaptive schemes,an adaptive robust state feed-back controller is designed to compensate the effects of faults and perturbations automatically.According to Lyapunov stability theory,it is shown that the robust adaptive closed-loop systems can be ensured to be asymptotically stable under the influence of actuator faults and bounded perturbations.An example is provided to further illustrate the fault compensation effectiveness.

Motion synchronization of dual-cylinder pneumatic servo systems with integration of adaptive robust control and cross-coupling approach

We investigate motion synchronization of dual-cylinder pneumatic servo systems and develop an adaptive robust synchronization controller. The proposed controller incorporates the cross-coupling technology into the integrated direct/indirect adaptive robust control(DIARC) architecture by feeding back the coupled position errors, which are formed by the trajectory tracking errors of two cylinders and the synchronization error between them. The controller employs an online recursive least squares estimation algorithm to obtain accurate estimates of model parameters for reducing the extent of parametric uncertainties, and uses a robust control law to attenuate the effects of parameter estimation errors, unmodeled dynamics, and disturbances. Therefore, asymptotic convergence to zero of both trajectory tracking and synchronization errors can be guaranteed. Experimental results verify the effectiveness of the proposed controller.

Fractional order adaptive robust formation control of multiple quad-rotor UAVs with parametric uncertainties and wind disturbances

In recent times,multiple Unmanned Aerial Vehicles(UAVs)are being widely utilized in several areas of applications such as agriculture,surveillance,disaster management,search and rescue operations.Degree of robustness of applied control schemes determines how accurate a swarm of UAVs accomplish group tasks.Formation and trajectory tracking controllers are required for the swarm of multiple UAVs.Factors like external environmental effects,parametric uncertainties and wind gusts make the controller design process as a challenging task.This article proposes fractional order formation and trajectory tacking controllers for multiple quad-rotors using Super Twisting Sliding Mode Control(STSMC)technique.To compensate the effects of the disturbances due to parametric uncertainties and wind gusts,Lyapunov function based adaptive controllers are formulated.Moreover,Lyapunov theorem is used to guarantee the stability of the proposed controllers.Three types of controllers,namely fixed gain STSMC and fractional order Adaptive Super Twisting Sliding Mode Control(ASTSMC)methods are tested for the swarm of UAVs by performing the numerical simulations in MATLAB/Simulink environment.From the presented results,it is verified that in presence of wind disturbances and parametric uncertainties,the proposed fractional order ASTSMC technique showed improved robustness as compared to the fixed gain STSMC and integer order ASTSMC.

Adaptive robust control of soft bending actuators:an empirical nonlinear model-based approach

Soft robotics,compared with their rigid counterparts,are able to adapt to uncharted environments,are superior in safe human-robot interactions,and have low cost,owing to the native compliance of the soft materials.However,customized complex structures,as well as the nonlinear and viscoelastic soft materials,pose a great challenge to accurate modeling and control of soft robotics,and impose restrictions on further applications.In this study,a unified modeling strategy is proposed to establish a complete dynamic model of the most widely used pneumatic soft bending actuator.First,a novel empirical nonlinear model with parametric and nonlinear uncertainties is identified to describe the nonlinear behaviors of pneumatic soft bending actuators.Second,an inner pressure dynamic model of a pneumatic soft bending actuator is established by introducing a modified valve flow rate model of the unbalanced pneumatic proportional valves.Third,an adaptive robust controller is designed using a backstepping method to handle and update the nonlinear and uncertain system.Finally,the experimental results of comparative trajectory tracking control indicate the validity of the proposed modeling and control method.

Adaptive robust control for four-motor driving servo system with uncertain nonlinearities

A novel adaptive robust control （ARC） is presented for the four-motor driving servo systems with the uncertain nonlinearities and actuation failures, such that the load tracking control is achieved with the proximate optimal-time. By applying the proposed scheme, several control objectives are achieved. First, the nonlinear synchronization algorithm is presented to maintain the velocity synchronization of each motor, which provides fast convergence without chatting. Moreover, the time-varying bias torque is applied to eliminate the effect of backlash and reduce the waste of energy. Then, the ARC is designed to achieve the proximate optimal-time output tracking with the transient performance in L2 norm, where the friction and actuation failures are addressed by the adaptive scheme based on the norm estimation of unknown parameter vector. Finally, the extensive simulated and experimental results validate the effectiveness of the proposed method.